Not showing any disk partition

previously i installed linux on my machine.now i want to install windows8,but the disk partition is not showing...

Hi,
Make sure your disk connect to the computer correctly. And then perform the clean installation to see if you could create new partition:
How to perform a clean installation of Windows
http://windows.microsoft.com/en-IN/windows-8/clean-install
Karen Hu
TechNet Community Support

Similar Messages

Windows 8.1 installer can not find any disk partitions at all in boot camp 5.1

Hello
I have purchased a new Imac 27" latest model with Mavericks pre-installed. I am trying to install windows 8.1 pro with original disc 64 bit in Boot camp assistant 5.1. I am using a usb dvd writer to read windows disc. I have rebooted into the windows installer after mac finised downloading the windows support software into my 64 gigabyte flash drive which is formatted in ms dos fat 32 format. I made it too "Where do you want to install windows" screen but problem is there are no drives showing at all to select. The space where you usually see four partition drives with the bottom one named Boot camp, that space is totally empty showing that there is no internal hard drive at all....simply shows a error at the bottom can not find any drive. Please Help!!!!!!
The mac os is running fine if i restart the mac and cancel windows installation. I have gone into boot cam assistant to delete the windows partition and retry but the same problem prisists. Plz help.

HI..
Better to post your topic in the Boot Camp community > Boot Camp: Windows Software: Apple Support Communities

Trying to upgrade from OS9 to 10.2.3, get as far as "select a Destination" the installation stalls and does not show any destination disks

I have a Power Mac G4, it has OS 9. Imam trying to upgrade to OS 10.2.3 (Jaguar). It is going smoothly until I get to the "Select Destination" screen. It stalls there and does not show any disks to choose from.
Any ideas?
Thanks. Abe Oliver

Hello Abe,
If it's a Digital Audio or earlier, you need to install a Firmware update first...
As explained in "Mac OS X 10.2 Welcome and Install Manuals" and "Mac OS X Welcome and Install Manuals", you may need to update the firmware on your Macintosh computer prior to installing Mac OS X 10.2 or later. The following table lists the firmware updates that are available for Apple products that can update to Mac OS X 10.2 or later.
http://support.apple.com/kb/HT1395?viewlocale=en_US
Power Mac G4
Firmware Update
Download Document No.
Power Mac G4 (Mirrored Drive Doors 2003)
no update needed
Power Mac G4 (FW 800)
no update needed
Power Mac G4 (Mirrored Drive Doors)
no update needed
Power Mac G4 (QuickSilver 2002)
no update needed
Power Mac G4 (QuickSilver)
no update needed
Power Mac G4 (Digital Audio)
Power Mac G4 Firmware Update 4.2.8
120068
Power Mac G4 (Gigabit Ethernet)
Power Mac G4 Firmware Update 4.2.8
120068
Power Mac G4 (AGP Graphics)
Power Mac G4 Firmware Update 4.2.8
120068
Power Mac G4 (PCI Graphics)
no update needed
Power Mac G4 Cube
Power Mac G4 Cube Firmware Update 4.1.9
75129

Can't see any disk partition after disk sanitizer

On my HP4530sPro is mistakenly launched Disk Sanitizer, and now, when I try to install Windows7 OS (Linux Enterprise Desktop was installed in the basic configuration), I do not see any disk partition. What to do.
Nicest compliments
This question was solved.
View Solution.

Your notebook is an Enterprise/Business model. I would recommend posting this in the HP Enterprise Support Forums for better coverage, as this is the consumer support forums.
You can access the enterprise support forums at the following link.
http://goo.gl/LsnuK
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Partition Tab not showing in Disk Utility

Hello again everyone,
I'm attempting to partition my LaCie 2TB (RAID1) Disk in Disk Utility, however the partition tab is not showing up..
There are 4 items visible in the Disk Utility window:
1) the Internal OS Disk
2) the LaCie 2TB (RAID1) Disk
3) & 4) the two slices/partitions of the LaCie mirrored RAID
I select the 2TB LaCie RAID1 Disk, however it only shows the "First Aid" & "RAID" tabs.
The "Partition" (as well as "Erase" & "Restore") tabs are not available or shown.
When I select the Internal OS Disk all the Tabs are shown, and when the 2 slices or partitions of the RAID1 are selected it shows the "First Aid, Erase, Partition, Restore" tabs..
Am I missing a step here?? I know I'm not supposed to select the slices/partitions of the RAID, but instead to select the LaCie 2TB Disk itself, however this is the only option which does not show any "Partition" Tab..
Any assistance is GREATLY APPRECIATED.. Thank you!

Have you tried this:
Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to two. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
I'm sort of confused as to why you would partition a 3 GB drive into just a single 1 TB partition, but that's what I understood you to say. Is this 3 TB drive installed in an enclosure that actually supports a drive of that size? Older enclosures may not and should not be used.

Not showing any partitions in the cube

Hi All
I created partition for the cube , im not seeing the partition in trgt cube
even its not showing source database and target database under the partition
I refreshed the partition
so how can i solve this , plz help on this
Thanks

Thanku rinku
I refreshed the partition but its not showing any thing
we have 4 partitions for 4 diff cubes;; for all the 4 partiotions this is the trgt(account) so i deleted 1 cube
form then on words its not showing any partitions in the trgt cube(Account) but remaining cubes under partition im able to see
for only trgt cube im not able to see
wat may be the problem?? plz help on this..
Edited by: user98631 on 23 oct. 2009 08:13
Edited by: user98631 on 23 oct. 2009 09:18

Disk Utility does not show any result....

Dear Apple Community,
on my mid 2012 Mac Book Air the disk utility test does not show any result. The test just stops at some point and can be restarted again, but does not show weather the SSD is damaged or not.
Does anyone know what this means?
Thanks a lot for your advice!

I think this happens to everyone (who uses "Live Verification") in Mavericks. Occasionally the output from the test shows correctly, but usually not. I guess this will get fixed someday.
Apple - Mac OS X - Feedback
For now, probably you will get best results from using command-r at startup to get into "recovery mode", then run disk utility from there.
charlie

HT1338 I am still with 10.5.8 and my macbook does not show any software updates, i am willing to pay for a new software if it is needed, because i can't connect mi iPhone 5S or iPad mini to iTunes. PLEASE HELP!!!!!

How do i update 10.5.8 if my macbook does not show any software updates?

Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading from Snow Leopard to Lion or Mountain Lion to Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mavericks- System Requirements
       Macs that can be upgraded to OS X Mavericks
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.

Photoshop CS6 is not showing any network drives within windows 8.1.

Photoshop CS6 is not showing any network drives within windows 8.1, I can only browse the local disk for files. Please advise?
And when i try opening a file directly from the network, photoshop starts but does not open the selected file?

The dialog you show there looks like it may be a CS6 open dialog running on windows 8.1 that is showing what is local. Network is not highlighted selected.
Here is a CC Open one windows 7 pro showing areas of what is accessible.

Thunderbolt WD Duo, does not show in Disk Utility

Hi Have imac 27 (late 2012) with 10.8.3 update OSX. Connecting to WD Thunderbolt Duo, the disk does not show in disk Utility, sys log or in any connection to the system. WD utility does not seems it either. Restart does not help. By disk returning to seller, the disk works fine on other comp (with the same cable, with the same power adapter)
Is there any issue known with the thunderbolt ports? Tried both all found on internet, but no resolution, to my issues.
Seems to be my imac hardware or maybee the software (thunderbotl 1.2) update.
Lukas

All thunderbolt port tried, cable exchanged, no change
I have done following procedure , no change
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

HT1430 my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?

my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?

There is a hardware problem. Whether it's worth it to you to have no working phone for 2 months until you can update vs paying for replacement/repair now is a question only you can answer.

My itunes in pc fails to secure link with itunes store it shows the process bar it automatically quits the process it also does not shows any on the screen. i am using windows xp service pack 3. what shoul i do?

my itunes in pc fails to secure link with itunes store it shows the process bar it automatically quits the process it also does not shows any on the screen. i am using windows xp service pack 3. what shoul i do?
Diagnostics test
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
ECS G31T-M7
iTunes 10.5.2.11
QuickTime 7.6.9
FairPlay 1.13.37
Apple Application Support 2.1.6
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.97
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0012ABAC07F3CCB0
Current user is an administrator.
The current local date and time is 2011-12-31 14:06:21.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is not supported. (16005)
Video Display Information
Intel(R) G33/G31 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:        {7599FAD1-1BB9-4AC6-80AF-404253DC519E}
Description:            Atheros L2 Fast Ethernet 10/100 Base-T Controller - Packet Scheduler Miniport
IP Address:             192.168.1.5
Subnet Mask:          255.255.255.0
Default Gateway:    192.168.1.1
DHCP Enabled:      Yes
DHCP Server:         192.168.1.1
Lease Obtained:     Sat Dec 31 13:46:09 2011
Lease Expires:       Tue Jan 03 13:46:09 2012
DNS Servers:         192.168.1.1
Active Connection: LAN Connection
Connected:             Yes
Online:                    Yes
Using Modem:        No
Using LAN:             Yes
Using Proxy:           No
SSL 3.0 Support:     Enabled
TLS 1.0 Support:     Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was unsuccessful.
The network connection timed out.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-12-31 14:00:02.
**** Device Connectivity Tests ****
iPodService 10.5.2.11 is currently running.
iTunesHelper 10.5.2.11 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Connected Device Information:
rawkiss’s iPhone, iPhone 3G running firmware version 4.0
Serial Number:       86931UEAY7H
**** Device Sync Tests ****
Sync tests completed successfully.

I have found a fix after doing additional research through this forum. Tech Note #328730 addresses this problem and it works for Photoshop Album 3.2 even though it was written for release 1.0.
Here is a link that will take you directly to the Tech Note:
http://kb.adobe.com/selfservice/viewContent.do?externalId=328730
When using this fix the Tech Note indicates:
"Imported image data and tags are lost when you re-create the My Catalog.psa file, so you need to reimport images and reapply any tags"
however it did retain the captions (at least it did for me).

IOS 7 Calendar Day View does not show any all-day events ?

Hi,
I realize that iOS 7 Calendar Day View does not show any all-day events.
Is this a bug ?
Any help given is much appreciated.
Thanks and Regards.

Mine brings me right up to the current time, or in the case of another day, it takes me to the first appointment of the day.

Search Item drop-down does not show any data for Advanced Search.

Hi,
I have a requirement to add a new criteria to the existing Advanced Search region of 'My Employee Information' in Manager Self Service responsibility. I substituted the AdvancedSearchVO to include the new column. Using personalization i did the below steps to show the new column in the page,
1) Created a 'Message Styled Text' item under Table Layout region to display the result. I associated the View Instance (AdvancedSearchVO1) and View Attribute (AttrColumn).
2) In Advanced Search Panel created a new CriteriaRow and set the 'Search Allowed' property to True.
3) In Advanced Search Mappings i tried to create the new mapping but the Search Item drop-down does not show any of the CriteriaRow item. But Results Item shows the 'Message Styled Text' item created in step 1 above.
Any idea what i would be missing becasue of which 'Search Item' property does not show any data?
I am using OAF version 12.1.1.
Thanks, Suresh

Hi,
I faced the same situation but i still waiting for the solution.. this is my problem's thread..
Addition of LOV Search Filter using Personalization
But when i tried to create a new custom page with advanced table and created a new LOV column via personalization. i was able to create new search mapping.. but this is not happening in the seeded page case :(.
I m also looking for solution...if any one can provide some inputs on it , will be highly appreciated.
Thanks
Renu

I really need someone to help me. I have been trying to figure out how to select a PDF document to convert to a Word doc. When I go to select a PDF file, all that shows up is the WORD docs. does not show ANY of my PDF files... Please help me figure out wh

I really need someone to help me. I have been trying to figure out how to select a PDF document to convert to a Word doc. When I go to select a PDF file, all that shows up is the WORD docs. does not show ANY of my PDF files... Please help me figure out what is going on? We have it set on auto renewal so I know its not that we haven't renewed this subscription, because we pay automatically.

Hi olivias,
It sounds like there may be some confusion on your system about what application should be associated with PDF files. You can reset filename associations by following the steps in these articles (depending on your operating system):
How to change the default application for a file type | Macworld
http://windows.microsoft.com/en-us/windows/change-default-programs#1TC=windows-7
Please let us know if you have additional questions.
Best,
Sara

Not showing any disk partition

Similar Messages

Maybe you are looking for