Not showing changes

I made changes to my site and published, but when I check online it shows the 'old' version. Grateful for any advice. Work in progress site is at www.sacredheartprimary.net

thanks, I think you are right, so I changed my question to a 'non-question', there seems to be no delete function.And thanks for comments on the site, I'm still working on the rollovers and some more tidyup to make it IE acceptable. Hope life is good in Singapore.

Similar Messages

HT1937 I recently tried to manage my storage by upgrading my plan to a 20GB and was charged but plan does not show changed

I recently tried to manage my storage by upgrading my plan to a 20GB and was charged but plan does not show changed

i have the same problem. I recently tried to manage my storage by upgrading my plan to a 20GB and was charged but plan does not show changed. At this time does not changed my plan yet. I have the reference number of the bank for the transaction.
<Email Edited by Host>

Preview in browser not showing changes in muse

I am trying to preview my changes in Muse but it's not showing any updates. I've doubled checked updates and shut down my laptop to reboot but still not working.

Hi there,
Could you tell me which version are you using, is it Muse CC or Muse CC 2014?
Also tell the Operating system that you have?
Have you checked both Preview in Muse and preview in browser? Try with clearing the browser cache.
Also, when you preview in browser, could you copy the address it shows in the address bar and paste it in the address bar of any other browser like Firefox or Chrome, see if it shows changes there?
Thanks.

Bridge Not Showing Changes made in Camera Raw

Hi I work on an iMac (Mac OS X, version 10.4.11), and am currently trialing CS4. My problem is that I have been processing Canon Raw files in Camera Raw, but when I view the images in the preview pane of Bridge, it is not showing the changes that I have made.
This is just a sudden problem. I have been working like this for ages in CS3, and it was even working properly in this trial version of CS4, but literally all of a sudden in the middle of processing a wedding shoot it stopped showing the changes. So half the images now show the changes but the rest do not, and it no longer shows any of the changes I make in Camera Raw
Does anyone have any answers to why this suddenly changed?
Cheers Da ni

DaniJumbo wrote:
This is just a sudden problem.
"Sudden" is usually a sign to trash your suddenly corrupted preferences. Hold down the option key as you launch Bridge.
You may also need to Purge the Cache for each offending folder through the Tools Menu in Bridge.
Also check your thubmnail options:

DNG files exported from LR4 not showing changes made when opened in PSE10?

I have LR4, and once I make some develop changes I've been exporting the files I want to use as DNG. I then open them in PSE10 to make final edits. It's been working fine, actually I had an older version of Adobe Raw in my PSE on my other computer. So when I opened in PSE it would ask if I wanted to conver to compatible version to edit in camera raw. I always said no b/c I didn't need to do anymore raw edits. Now that I have installed PSE on my new computer, it has the new ACR version I guess. When I open the DNGs to edit now I no longer get this error message, but it's showing my contrast, etc. as a standard raw setting instead of the changes I made in LR. Some are showing....like vibrance, but "recovery" which I know is "highlights" in LR, and other things are not showing correctly. I know that the options are different, but I don't want to use the ACR settings that it's using when I open the file, or have to go through them again. I'm sure there's something I'm missing but can't figure it out. Thanks for any help!

I quite simply did not comment on the issue of "it is supposed to be better to keep DNG files as opposed to NEF files now, right?"
The issue you raised in your original post, and the issue of choosing DNG versus NEF, are completely separate and independent.
The issue of transferring photos to PSE would cause the exact same problems in your case whether or not you use DNG or NEF.
On the issue of converting photos from NEF to DNG, there are advantages and disadvantages, some people do and some people don't. If you'd like to know more, I suggest you search this forum, there are plenty of discussions on this topic.

IWeb NOT showing changes after publishing

I had 2 sites I created with iweb. I made some changes on one, but not only did it not show any changes after I published it but said there was an error. I could access the site when I entered my basic domain name, but not through iweb. I deleted BOTH sites and started from scratch. Saved my work and tried publishing at least 5 different times. It STILL shows my DELETED sites (which I can't even see on my computer because I DELETED THEM!). MobileMe account is current. Domain name current.
Anyone else having these issues? ANy idea what to do?
Thanks

But did you delete your site folder from MobileMe too? It's all very well deleting your site from iWeb, but if you really want to delete it and start again, you also need to delete your site folder and index file from MobileMe. Log into MobileMe and then go to your iDisk and delete the files from there too and then re-publish from iWeb and your new pages should show.

Photoshop CC not showing changes live

Since moving to Photoshop CC from Photoshop CS5 I have an issue that no matter what task I do in Photoshop it will not show the change till I click another tool and then click back.
So for instance I could type the word "Hello" but it will not show on my screen till I click another tool like the pointer tool and then click back to the text tool. The same happens for every change I make in Photoshop no matter the tool.
Here I've typed Hello.. this is what I see (font is red)
Now I've clicked the pointer tool. I can see the square around the text..but not the text itself
Now I've clicked back to the text tool and it shows up.
I have updated my computer drivers, graphic drivers, re-installed photoshop (after I reformatted my hard drive from a virus and it's happened on both copies). I've tried changing all my preferences and turning off 3D functions, turning on 3D functions and having high VRAM. Nothing fixes the issue and my computer is more than enough in terms of Ram/Processor/Graphics Card.
Anyone else have this issue and find a solution?

Update as you are on 14.0. See it that makes difference.

App updates not showing change logs in iTunes 12.0.1.26

As above, since the new update and then the update with Yosemite when i go into the app section and go to updates the showing updates now only show the basic info. It does not show what the new changes have been, minor i know but i do like to know what the changes are so i can wait for a future release before updating as some of the apps are huge downloads now.
Thanx

I'm having a similar issue, but cannot see anything to do with airplay in the SysPref > Sound menu. My mac is too old to run Yosemite, so looking to find another way to get this fixed. Any ideas?

Css-file on Romote Site does not show changes

hello
I use Dreamweaver CS4 on Win7 64bit system.
I have a new website in construction and today the developer made changes to the Style.css file. Made the changes on an other computer and not in Dreamweaver.
Now, when I open the Style.css file from the Remote Site, it does not show the changes that were made. However when I delete the Style.css file in my Local Files directory and copy the Style.css file from the Remote Site to the Local Files and open it from the Local Files in Dreamweaver, it shows the new file with the changes that were made. But the Remote file keeps showing the old data.
I took several steps to try to eliminate this problem. Closing Dreamweaver and deleting the Configuration folders in Users>[NameUser]>AppData>Roaming>Adobe>Dreamweaver CS4> Both in en_US and nl_NL, although the latter did not contain any files.
This did not work. Deleted the Style.css file on my Remote Site and uploaded it again from my Local Files. Nope. Still shows rthe css-file with the old data.
Anybody any idea where Dreamweaver gets these old data from and how to make it work differently?
greetings, Lex van de Oudeweetering

Hello Ken
I did not say my page is troubled. The trouble is that the style.css file opened from the Remote Site in Dreamweaver shows the wrong data, but in effect has the right data, because when copied to the Local Files and opened from there it shows the right data.
The link to the page/site in construction is http://www.lex-illustrator.nl/lexillus
And I have made screenshots of the opend css files and assembled them beside each other.
On the left opened from the Local Files and on the right side the same css file opened from the Remote site.
The orange dots indicate where they differ, the green ones the items that were changed today. So it's not a problem of only today.
http://www.lex-illustrator.nl/2xcss.gif
And I have to say I had issues before with updating files to the Remote server and how Dreamweaver shows them. Much of the times I have to delete the Remote file first to get it dispayed right if I check if it has worked by trying to open it from the Remote server.
So it's not only limited to this site under construction. It looks like a Dreamweaver thing to me.
Greetings, Lex

HT4060 Ipad2 not showing changing icon

My iPads is not showing charging icon on right hand side at top when plug into mains charger.

The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
 Cheers, Tom

JSP not showing changes in IPlanet 6.0

I have made changes in JSP and replaced old file with the new one. When I access the file again it shows the result as per old file format and only on refreshing it shows changes in new format. I am using IPlanet 6.0 and Oracle 8.1.7.
I have tried clearning cookies and Temporary Internet Files from user side.
Where am I making mistake?
Regards
Manu

This looks like an instance of:
4931321: Cannot specify java.util.logging.manager property using JWS
/Dietz

Bex iView does not show changes made in web templates

Hello,
I have a Bex iView that presents a web template which is exposed in two portals.
I made a certain change in the web template in portal A and I can see the change through the Bex iView in this portal.
I than transfered the change to portal B and I can see this change at the Web application designer's code when it is connected to portal B.
The problem is that I can't see the change through the Bex iView in portal B, it keeps presenting the old version of the web template. Also, if I preview it from WAD, which opens it in the portal, it shows the old version as well.
<b>I've already tried/verified the following:</b>
1. It's not a client related issue as it happens to all clients.
2. I have tried clearing both the client and the portal's pcd caches.
3. No cache whatsoever is configured in this iView's properties (Cache Level: None, Cache Validity Period: 0,0,0,-1, Allow Client-Side Caching: No).
4. When I run the iView in debug mode in the application integrator I can't see anything unusual I can think of. Also, I can see there that it points to the correct web template.
5. Retransported the web template from server A to server B.
What else can be done here? Any ideas...?

Hello,
did you resolve your problem ?
Best regards

Bridge Preview Images not showing changes made in ACR

Suddenly my raw (Nef) files in Bridge are not reflecting the changes I make to them. In other words after downloading from my CF card, I work on raw files in ACR either one at a time or sometimes applying changes across several pictures. The changed files show up in Bridge briefly and then revert back to the unchanged looking raw. All changes actually exist because if I open the file in ACR or PS they appear just fine. In Bridge however, no changes including cropping, etc. show up. When I open Bridge the files are fine for a moment and then they revert to the uncorrected raws. I can also go to View and hit "refresh" and they will all show the proper changes for an instant and then revert to the original state again.
I've tried resetting preferences, purging and rebuilding cache, deleting temp files, removing and re-doing xmp files, expanding cache size and all the various rendering options in Prefs. Nothing works.
I cannot use the Bridge Light box or Preview function to compare photos because the corrections I made aren't there to be seen. The only way to see them is to open each file one at a time in ACR. This problem has forced my workflow to a crawl as I have to edit one pic at a time without being able to compare two together. Any help would be appreciated.

Hi All:
I had similar problems plus constant crashes that made Bridge unusable.
It drove me to try alternatives to bridge and to try Lightroom. I like
Lightroom better than bridge but it has an operational limit that leads me
to be reluctant switch. But here is the rub, now Bridge is working
perfectly! What I think fixed Bridge is running a disk/registry cleaner
called Ccleaner multiple times. I ran it almost every day for a week. It
found lots of stuff in my registry that it didnt like but as time went by
it found less and less. It also let me turn on or off services that run at
startup. I shut off anything that I could see that I didnt need, like
Adobe downloader; I dont need automatic downloading, as I can do it
myself. The result is at some point Bridge started to work again. It has
stayed working for more than 2 weeks now without one crash. I dont know
what was fixed that did the trick but so far Im happy. Ccleaner is a
free program and can be found at http://www.ccleaner.com/. Its a live
program as there have been several updates since I started using it. Try
it; I think it worked for me.
John Passaneau
PS
After Bridge started to work again, I had to purge the cache and rebuild
it. I use cache distributed to folders as I keep my photos on a network
attached drive and access them from 2 computers and a local cache will not
work for me.

When I use Firefox to monitor changes I do to HTML files locally, it does not show changes to images unless I restart the browser. Is this a bug?

I have the local and the remote versions of a page open in two tabs. I change one of the images (keeping the same name in the HTML) and upload the changed image. The tab that shows the remote page only takes a refresh to show the change. The tab showing the local page not. I have tried opening it in a new window but it still does not change. Only if I restart Firefox does it show the change. Why? Is this a bug?

grantheaslip's suggestion doesn't work for me; no change at all. (Thanks anyway.) Any other ideas? Is there another way to "hard" refresh? I don't see anything in the menu.
Also, it seems like this is a very recent problem. I thought in the past that a regular refresh did the job.

Create a DNG file that does not show changes when viewed by others

I am adjusting my RAW Images in Adobe Lightroom and want to export them as DNG without betraying the evidence of my post production efforts- is there a way to save an altered file as a DNG without showing the client which changes I have made when they open and review the files in CS3 (bridge/camera raw)?

> is there a way to save an altered file as a DNG without showing the client which changes I have made when they open and review the files in CS3 (bridge/camera raw)?
The raw data itself is not affected by the adjustments, only the metadata. This means, that the adjustments you made are recorded in the DNG file in XMP format, which is quite clear-text, like
> +1.0
   25
   0
   False
   Custom
     0, 0
     22, 30
     51, 68
     128, 128
     206, 149
     255, 255
As this can be seen by anyone, who knows where and what for to look, you need to have ACR record the adjustments in XMP sidecar files (which is a better way anyway, you can archive the original file and the adjustments separate).

Page not showing changes after refreshing

For some reason after I made a few changes to my index page and uploaded with Dreamweaver MX, the changes won't show up in my browser(s). I don't think I did anything different, and I made changes on it just a few minutes ago. It's maddening to not be able to figure out something so simple.
Can someone assist?

Hi,
pardon, but have you really done all these things, so that your browser is "convinced" to show your modification?
- refresch browser
- If set, delete the bookmark to the page or re-create the bookmark.
- Quit browser
- Empty the Temp Internet Files Internet Options
- Clear History
- Delete everything in general, where the browser remembers visited sites.
- Restart
- Clear Site visit
- Clear Bookmark
- Use another browser in order to test
Hans-G.

Not showing changes

Similar Messages

Maybe you are looking for