Not showing Currency Code on Print Layout

Hi to everyone,
Is there a possibility not to show the currency code on the document layout, ie, when printing document
Thanks
Kentish

Hi Kentish,
That would be depending on each document.  You may change variable to a database field to show amount without currency code.
Thanks,
Gordon

Similar Messages

  • Shared printer from a pc does not show up on my printer list.

    I have a macbook air and the shared printer from a pc does not show up on my printer list.  I know it's available on the network as I have a another pc that has access to it.  The Mac did find it at one time but it has since disappeared.  Appreciate help.
    Rich

    Can you see the CD ripped songs in iTunes itself? Can you then right-click and select "Show in Windows Explorer"?

  • Canon MP210 just will not show up in Add Printer

    Trying to help a friend get new (to her) printer added in OS 10.5.8... There isn't even a network involved, just trying to add it as simple USB.
    It's a Canon Pixma MP210 and wasn't in the printer descrips, so i downloaded and installed the most recent driver for it from Canon, which is noted as good for 10.5 etc (and is CUPs to boot).
    its Installer runs just fine... but printer still does not show up in Add Printer, despite restarts, printer attached, not attached, whatever. printer is not in list, "Print Using..." shows no options, and "Add" is greyed out.
    The printer itself was never used by its former owner, it's like new, so it's not likely broken.
    i attempted to repair permissions, and ran into no-go there too. It sticks on acquiring the database, doesn't even get to a progress bar (let it run for almost an hour, no change). Same thing when i start it up/run repair permissions from retail OS 10.5 DVD.
    And this on a smallish (60GB) hard drive that has barely anything on it ....she mostly just websurfs and emails. Tho the finder is a bit slow, there doesn't appear to be anything wrong with the mac (it's an iBook G4) and it passes disk first aid fine.
    Suggestions?

    lisajoy wrote:
    Any idea why Permissions Repair doesn't progress, neither from hard disk nor from DVD? From other posts i've researched here, repaired permissions apparently allowed some canon printers to show themselves.
    If Repair Permissions is not completing then something would be amiss with the OS. But I've never a repair permissions resolve a printer not appearing in the Default browser view. It could certainly fix an issue with the printer being seen but the driver not being found. But for the printer not to be visible in the Default view when it is connected to the Mac via USB, then I don't believe a permissions repair will resolve this - especially also if the printer is not visible in System Profiler. Personally I found a reset of the printing system rather than a repair disk permissions to be more helpful.

  • HT4356 Up photos mart c7100 series wireless printer does not show up as a printer. Anyone found a fix for for use with ipad3?

    Up photos mart c7100 series wireless printer does not show up as a printer. Anyone found a fix for for use with ipad3?

    It sounds like the features are working through the USB connection rather than the wireless connection since it is still not seeing the networks.
    Everything points to a hardware failure since the steps provided through the private message did not work and the wireless test showed it had failed.  Sorry.
    You do have some options at this point.
    If it is under warranty, either standard or extended, you can contact HP support at 1-800-474-6836 to have it serviced under warranty.
    If it is out of warranty, you can still contact HP support to find out all the options and the cost of each option.  However, it is my opinion that this money would be better spend being applied towards a new printer. 
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • I cannot install a Canon MX420 printer to my Imac.  It will not show up in the printer preference bar

    I am trying to install an all-in-one printer CanonMX420 and the printer is not showing up as a printer option.  At a loss

    Have you downloaded latest drivers from Canon web site ?
    Have you tried setting the printer using its IP address ? (you can configure it either from the web interface embeded within the printer or via the config screen)
    Mine is just showing up in the preference pane. My only issue (after having setup vuescan and removing it) is that I can not access it using default interface. I have to use VueScan and nothing else...
    But i's working fine.

  • I am not able to print on my existing printer. Print mode takes me to "Print to File" . It does not show me my laser printer.

    I am not able to print articles or E-mail on my existing laser printer in print mode. It takes me to "Print to File" . It does not show me my laser printer.

    hi,
    what's SAP version you are using ?
    I am using SAP R/3 4.7 ext 2.00 and have Basis patch level 52 (minimumly), I am  able to use SAP Front end printing.
    You can use Access Method : G : Frontend print with control technologie
    and also Host Printer : __DEFAULT
    best regards,
    ardhian

  • I book text boxes that are not used will not show up in the printed book?

    If I don't want to use all the text boxes for my printed book will the outline be printed anyway?(black background with white text box) I assume there is no way to turn the captions off.
    Many thanks in advance.
    Dennis

    Dunny
    Welcome to the Apple user to user assistance forums
    Which theme and layout are you discussing
    In general text boxes do not show in printed books - however they must have something in them - at least a single space
    But some clearly show up - in the travel theme the layouts that have text blocks that look like a torn piece of paper or a post card will of course print
    Always preview your book and verify the resulting PDF to see what you rfinal book will look like - http://support.apple.com/kb/HT1040
    And usually I can find an alternative layout with no text
    LN

  • Print preview window not showing page to be printed

    My wife and I just downloaded Firefox to our new Macbook Airs with Lion. The small preview box in the print layout widow does not show the page being previewed. In addition, the selected print windows are not holding from print session to print session.
    I love Firefox on my old Mac, so please help us resolve this problem.
    Pete
    [email protected]

    Sean, I was importing directly from the camera to Lightroom. I might add that I have been using this same procedure for a couple of years now and only within the past few weeks have the problems come up and if I made some change somewhere along the line I certainly have no idea what the change was. As I have mentioned before in some of this forums communications, when I imported directly from a card reader outside of the camera, everything was just as it should be and yet up to a couple of weeks ago, I could import directly either from the camera or a reader card with the same perfect results. (This is from my Canon XTi as I do not have a card reader yet for the G10) I would assume a card reader will work as well for the G10 and so I have ordered one and hopefully this will be a rather simple solution to the problem. As John had indicated in one of his messages he occasionally liked to import directly from the camera and I echo that as I do also.
    Bob

  • When I try to print from web page I get "printer not activated - error code 30", printer works on Internet Explorer

    When I try to print from web page I get a dialogue box "Printer not activated - error code 30" followed by a dialogue box "An unknown error occurred while printing". The printer works on websites when I use Internet Explorer. Also, if I copy the web page and paste it into a Word document, I can print a copy. This issue just started this week; I have not encountered this problem prior to this week. Please advise.

    What does that error message say?
    See this: http://kb.mozillazine.org/Problems_printing_web_pages

  • Eprint submissions not showing up in hpconnected print queue

    I've used eprint for a year or more; suddenly it's not working and the files I submit by email are not even showing up in the hpconnected print queue, under collections.
    I have tried several types of files tonight - short emails, word documents, etc, in case a virus was somehow attached. I've submitted from a mobile device and a desktop. 
    The print queue remains empty. 
    I have tried from 2 email addresses, both of which I've confirmed tonight are  authorized email addresses. 
    Printer: HP Photosmart C410a
    -frustrated.
    Thanks!

    HI Kelownatom,
    Welcome to the HP Support Forums.  I understand that your ePrint jobs are no longer printing and are not showing up in your HP Connected account's print history section.
    To better assist you, would you please provide some further information:
    Is the ePrint email address in your HP connected account showing the same email address that is being used by your devices?
    Is web services still active on your printer?
    Is the blue wireless light turned on and not flashing on the front panel of the printer?
    How are you sending the ePrint jobs (sending an email to the printer and attaching a file, forwarding an email to the printer with the file attached, sending via the HP ePrint app or the HP All-in-One Printer  Remote app)?
    One easy step to try is to power off your printer using the on/off button, wait 15 seconds and then turn the printer back on.  
    Thank you.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • Printer not showing up on add printer

    We have a network of both PCs and Macs and a central Sharp Copier.  We have the latest driver for Yosemite but the copier is not showing up in the add printer list.  When we try setting the Macs up through the IP menu it says unable to verify printer, etc.
    The printer sets up fine on the PCs.
    The printer IP shows up on an IP scanner but not on our Motorolla Router/Modem from our ISP (Broighthouse).
    The Sharp guys have been out here and have determined the issue is not on the printer side and suggested contacting Apple.
    Thanks in advance for the help!

    Ok...so I have solved my problem. The new router was blocking port 631. I forward this port to the desktop ip address and all is well in windows printing land.

  • White swatch does not show on PDF or print-outs...

    Hi,
    I've been noticing this glitch with the white swatch option more and more:
    When I apply it to objects, it appears in the file, but when I generate a PDF it vanishes, and of course does not show on the print-out either.
    Also, it won't show up on the print-out directly output from Illustrator.
    Anyone seen this issue?
    When I change the color to anything else but white, the graphics show up again.
    Thank you.

    If you turn on Overprint Preview in Illustrator, does it also disappear?
    Overprint may be turned on, check the Attributes pallet, and uncheck Overprint Fill and/or Overprint Stroke.

  • Attachments not showing when email message printed

    I recently sent an e-mail with 11 attachments. When I printed that e-mail message, it did not show the 11 attachments in the body of message as has previously. Any suggestions?

    Fixed it on my machine!  Found the solution via an similar problem people were having in the Aperature program.
    SEE HERE:
    http://aperture.maccreate.com/2011/08/25/aperture-3-will-not-play-videos-if-lion -is-installed-and-3ivx-video-codec-is-installed/
    I did a spotlight search for 3ivx on my computer and it found an 3ivx UNINSTALLER.
    After uninstalling 3ivx and restarting - MOV VIDEO files worked again in my Apple Mail client. 
    I wasted 2 weekends of clean installs etc etc.  Glad it's ficed though.  

  • Design not showing only code

    Hello, I have Dreamweaver showing both the code and design
    view. However, when I type in the code and want to see the design
    in split screen, only the code is showing in the design window. I
    am using a table to add some images. For my table I know have a
    greeen outline of the table that shows the layout, which I did not
    have last time I did a table. Not sure what is going on. Thanks for
    any help.

    take a look in the dw menu-->View-->Table View
    Which one has a checkmark next to it?
    Alan
    Adobe Community Expert, dreamweaver
    http://www.adobe.com/communities/experts/

  • Panel interface horizontal ruler not showing in code

    Hi I have just reinstalled Dreamweaver cs5 onto a new computer (pc), I have opened up an existing web page I am currently working on, only to find the horizontal ruler at the bottom of the code box is no longer showing as it was on the other computer, because my lines where long it was handy to scroll horizontally to keep my code tidy, the vertical ruler appears.
    Cheers

    The namespaces is displayed in black.
    I'm using http://sap.com/xi/WS for the namespaces. Is it a problems?
    Hi,
    If you look under the document (Shift + F1) in SPROXY, click on Generation Tips.
    It says,
    If a SWCV that has been created in the SLD is not visible in the navigation tree in transaction SPROXY, note the following:
    SAP components (Vendor = 'sap.com'):
    The navigation tree only displays the software component versions that are installed in this system (see table CVERS, or choose System -> Status... and then the Component information pushbutton).
    Non-SAP components (Vendor is not 'sap.com'):
    All components are displayed.
    You need to rename your namespace i guess.

Maybe you are looking for