Not showing ethernet connection

My first wireless router was not a linksys. I couldn't get it to light up any of the four channels. I thought it to be defective so I got a linksys WRT54G ver 6. It connected OK after the first try and worked for about 2 weeks and then stopped. I tried unplugging all components and turning back on, tried to reinstall the software, now this system won't show the ethernet light on any of the four ports I've tried plugging it into. Is this a problem with firewalls or could it be my luck to have a defective unit?

That would be some luck if they were both defective. Did you try the Easy Link Advisor? Maybe your cable from your machine to your router is bad? I'm not too sure on this one. Can you access the router?

Similar Messages

Wifi problem: I have a airport wifi the small one with one port for modem. My Problem is airport wifi works fine however when I power off my IMac then power it up later on It does not show a connection I then have to manual do it my self it's a pain and n

I have a airport wifi the small one with one port for modem. My Problem is airport wifi works fine however when I power off my IMac then power it up later on It does not show a connection I then have to manual do it my self it's a pain and never happened before I have tried resetting the airport unit but still no luck please help.
Thank you
Roy from malden

Hi Roy, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.

Hub Manager does not show Wireless connection

My 'Hub Manager' shows my Ethernet connected PC; my hub phone and the wireless connected printer.
My daughter has a new laptop which has wireless connection to my Hub. According to her laptop it is connected to my Hub and she has access to the internet.
However, my Hub Manager does not show her as connected to the Hub. The result of this means that she cannot connect to the wireless printer.
We have disconnected and re connected to no avail.
Any thoughts??? All help appreciated.

Hi
to get more replies suggest you repost on the broadband board
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

What is (en1) adapter and why am I not showing airport connection?

Ok, so I'm in the network preference pane looking at three possibilities.
1) Ethernet adapter (en1) which shows an IP and tells me I'm connected to the internet.
2) Airport which is connected to my home network but does not have an IP and "cannot connect to the Internet"
3) VPN (L2TP) which is configured but not connected.
So, back to my original question. As I am obviously connected to the Linksys wireless router through the airport card, what is this en1 and why does it tell me I'm connected through it instead of the airport?
Message was edited by: Trent Mckenica
Message was edited by: Trent Mckenica

I was (am) definitely connected. Just was a little confused as to why the Airport pane didn't show connectivity. I ended up going to sysprefs, choosing "Show: Network Port Configurations", and dragging the Airport to the top of the list. (It did show BOTH Airport and en0 network adapter as choices). After dragging Airport to the top of the list, the Airport TCP/IP pane showed the connectivity I expected to see in the first place. Really not an issue as I was always connected anyways, just not what I was used to seeing.

My apple tv is not showing or connecting to my 8 month old Imac

I can not get my apple tv to connect to my Imac. was working fine last time I used it a week ago. Now it's not showing on my computer and will not connect. Went through entire troubleshooting guide, everything is proper, but still does not work...

Welcome to the Apple community.
A number of people have reported similar issues recently, many appear to have found a discrepancy of some kind in their account settings and making changes to these settings or simply resetting them has resolved the matter.
Check your account details are correct, check that you are using the correct details for Location, Region and Time Zone. You may want to change these settings and then change them back to see if that helps.
You might also try logging out of and then back into your iTunes account (Settings > iTunes Store > Apple ID’s > Sign Out) and restarting your router. (Some have reported that after doing this, they need to check for rentals even though it may report that there aren’t any, after which rentals once again appear in the ‘movies’ feature)
Rentals should appear under their own heading in the ‘Movies’ feature, you might also check at Settings > iTunes Store > Check For Rentals.

Not showing ipod connection to itunes?

Sorry i've had my ipod for about 5 months and i hadnt had this problem till about a week ago...whenever i plug my USB connection cord that came with the ipod into the computer with the ipod plugged in with it, it shows my ipod charging but doesnt show it connected to itunes, meaning it wont download any songs onto my ipod automatically because it shows that my ipod isnt plugged in when it is, if anyone can help me out that would be much appreciated! thanks!
MA477LL Windows XP 2GB memory version 1.1.2

Have you had a chance to look at these troubleshooting pages? They may be of some help:
iPod shows up in Windows but not in iTunes
iPod missing in My Computer and in iTunes
iPod is not recognized properly by computer when USB drivers are not installed properly or are out of date

AEBS does not recognize Ethernet connected PC

I have successfully replaced my DLink wireless router with the AirPort Extreme. I have 2 wireless connections to Macs and two Ethernet connections to two other Macs. A PC is attached by Ethernet to the AEBS but it will not connect to the internet through the AEBS. It worked fine on the DLink. What suggestions do you have for me? Thanks in advance.
Slater.

figured it out myself. Darn complicated PCs.

HT4235 my iphone does not show as connected on itunes menu

suddenly my iphone will not show as a connected device in itunes even though my laptop recognzes that it is attached to my usb port
I have synced this phone before but now it is not recognized by itunes.

Hello wtcooper217,
It sounds like your iPhone is not seen in iTunes but your computer does recognize it. I recommend the troubleshootings steps from the article named:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Thank you for using Apple Support Communities.
All the best,
Sterling

I just synced my 2 ipods but now my ipad does not show as connected when I try to sync it. Had no problem syncing before. Did troubleshooting but have not uninstalled itunes. Help!

just synced my 2 ipods with no problem now trying to sync my ipad and itouch and they do not show on the screen as usual . Help!

You give very few details. If I stated that .......
"I started my Nissan today and it started fine - but my Chevrolet will not start today - but it started yesterday. Help!" - you would probably have no idea where to begin with doling out advice or troubleshooting steps. What troubleshooting did you do? Obviously not all of it - if you did not uninstall and reinstall iTunes.
Quit iTunes, reboot your PC and then try again.
If that does not work, you could post back with the OS that your actually running on your computer - I am assuming that you are a Windows user and I could be wrong, but without some help from you .... Well we are just beating our heads against the wall.

Airplay Icon not Showing when connected to my car's bluetooth stereo

I have an UVO system in my Kia. It has been working great with the Iphone Airplay since October. I recently updated my phone and now, just like many others, no airplay showing up on my music apps.
I basically use Spotify and Pandora all the time with zero issues. Now when my phone is connected to my car through bluetooth, my phone works perfectly and can talk through the speakers for calls but the music apps do not display the icon to switch between dock connector or bluetooth audio. This has led me to believe it's not a problem with my UVO system in my car but rather an apple related issue. Why would they dissapear? I have tried shutting off, rebooting, and all that jazz on both my Iphone 4 and Ipad2. Also, even when connected through the USB port, the UVO still doesnt recognize the audio.
Any advice would be awesome!

I DON'T text and drive. I just want be able to hear, for example, alerts that I have put on my calendar. I can/do pull over to look at texts--but not when I don't know that I have a message. This was never an issue until a couple of weeks ago.

E3000 as an access point with an E3200 as the primary router not showing all connected devices

I recently rewired my home with cat 6. All network and telephone comes in to the basement. While most devices in the home were converted to LAN connections a few remain WiFi connected. The connections are as follows:
Cable modem -> E3200 ->High Speed Switch <--> E3000.
I purchased the E3200 to be the primary router. I'm using both 5.0 and 2.4 ghz connections. I set up my (existing) E3000 as an access point (AP) according to these instructions. I used the LAN-LAN setup so that all devices would be on the same network. Both E3200 and E3000 are at the latest firmware level. Both use the same SSIDs, one each for 5ghz connection and a second for 2.4 ghz connection. Almost everything is working but there are a few nagging issues.
1) A smart phone connected wirelessly to the AP shows as a LAN connection when viewing the E3200 DHCP client list
2) I set up a DHCP reservation for my network attached printer on the E3200. When it connects via the AP it is not assigned the predefined IP address
3) I can see the network attached printer on the E3000 MAC filter list but I can't see it when viewing DHCP clients or MAC wireless clients from the E3200 even though the printer is attached and working correctly.
I can understand the reasons for issue 1 but it seems that a client attached to a wireless AP should also show as wireless to the main router.

Well, let me know what IP addressess you have assigned to the network devices? Second if you remove the switch from the network (between E3200 and E3000) does the issue still persist... Once powercycle the whole network and then check whether it happens or not.

Desktop Manager does not show blackberry connected

I find this desktop manager is NOT set up for the average computer user and just wants you to PAY. As I was quoted $650.00 for one year of support. I will go back to Motorola before I pay that amount of cash. The Motorola software is user friendly and support was FREE. The only reason I got a BLACKBERRY is I won it and I broke my Motorola and needed a new phone anyway.
I have had this paperweight for two weeks and am very tempted to recycle it. I have installed this software twice and reinstalled it twice and every time I try to connect it to my computer the Desktop Manager does not pick up my Blackberry it shows Disconnected yet I have to go to safely remove hardware to disconnect it and it shows in there

I would suggest you use the following procedure to do a clean install of the 4.3 software and download 4.5
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB11320&sliceId=SAL_Pub...
I use this version and it is very stable with XP.
Here is the link for DM 4.5, I would STONGLY advise against downloading the media manager as it media not stable.
https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
Please let me know if you need any further assistance!
Thanks,
Message Edited by Bifocals on 09-02-2008 05:06 PM
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Server Admin not showing IMAP connections and false Mailman status

Although several users are connected to the cyrus IMAP server (IMAPS/TLS) Server Admin reports zero connections. Also Server Admin reposts that Mailinglists are stopped but Mailman is running fine.
Any suggestions? I'm running Mac OS X Server 10.5.5 (9F33) and the same version of the Admin Tools.
Best regards,
Stefan

For mail status, do a comparison via the Terminal:
sudo serveradmin fullstatus mail
But I have also seen this issue with 10.4 server (IMAP connections not reliably reported).
If you watch the system.log , you can see incoming connections (authentications) happen.
Another way to check for active IMAP connections is via:
netstat -anp tcp | grep 143
(or, use 993 for IMAP w/SSL )
The best way to administer mailman is via its web interface, which you can access on your server via
http://mail.yourserver.com/mailman/admin
where of course "mail.yourserver.com" is its FQDN without actual quotation marks.

IPod contents not showing after connection to 2nd Mac

I sync my iPod with my home computer with no problem. I bring it to work and just connect it to my work computer and it sees it as a volume on the desktop and in iTunes, but when I unmount and go to use it, the iPod the contents are gone. I know everything is still on the iPod (I can see it shown in the usage bar in the iPod summary window in iTunes) but the iPod shows no songs or video for me to play. I don't sync it with my work computer--I am only interested in using it for disk use. When I take it home and sync it everything is there and it works fine after that.
I have the same iTunes account at home and at work and it gives me no warnings or anything when I connect the iPod at work (about syncing or erasing contents). I am thinking it may possibly be the difference in iTunes versions. I have 7.5 at home and 7.3.2 at work (I would have 7.5 if I could).
Any suggestions? I would hate to think I cannot use it as a transport drive anymore...

I am thinking it may possibly be the difference in iTunes versions. I have 7.5 at home and 7.3.2 at work (I would have 7.5 if I could).
Yep, that's probably correct.
http://docs.info.apple.com/article.html?artnum=307056

Earpiece symbol not showing when connected

Please i can't listen to music through earpiece and i bought my phone new,its c5-00.2 ,initially it use to play but sometimes it wont but now its not working anymore,please what will i do

Hi Pboy9ja,
Thanks for posting.
Please visit a Nokia Care Point to have your C5-00 checked. If it is recently bought you might also want to consider returning to your supplier. From what you describe it appears the switching mechanism in the earphone connection is not working which is why the phone does to detect the headset being plugged in.
Hope this helps, let us know how you get on!
Kosh
Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you!

Not showing ethernet connection

Similar Messages

Maybe you are looking for