Not showing in itunes after 5.0 update

I have just installed 5.0 on both my iphone and ipad and neither shows up in iTunes BUT both show up in iPhoto! I'm running itunes 10 and have reset both devices. And like others have noted, the battery life on the ipad is now rubbish, I can virtually watch it drain out.

same with me. After I updated my iPad 2 3G to 5.0, my device not showing up in my iTunes. PLEASE guys. HELP!

Similar Messages

  • Mobile apps not showing in itunes after upgrade

    After upgrading to iTunes 10.5.1.42, the apps I've purchased no linger show in the library listing.  They are still on my Windows 7 machine in the folder ...\music\iTunes\iTunes Media\Mobile Applications.  They just do not show in iTunes.  Does anyone know how I can get them to show again? 

    I get to this step in step 5 but I dont have the file/directory
    Double-click the "usbaapl" file. (This file will be called "usbaapl64" if you have a 64-bit version of Windows. If you don't see "usbaapl64" here, or if there is no Drivers folder, look in C:\Program Files (x86)\Common Files\Apple\Mobile Device Support\Drivers. instead).
    Where can I download the needed file? I think it is called usbaapl64

  • IPhone 3GS not showed in iTunes after update to Version 4.0

    Hi,
    I just made an firmware update using iTunes to my 3GS.
    The installation went well, and the iPhone is working great.
    But the problem is that iTunes is not displaying the iPhone anymore.
    I already tried everything listed on the Apple support page, but nothing will help.
    iTunes is also the latest version (9.2).
    Windows is still recognizing the iPhone, the erroe is just in iTunes.
    When i connect the 3GS iTunes freezes completely for about 1 minute. Then iTunes runs again, but not showing the 3GS.
    I already searched several forums but couldn't find a solution.
    Can anyone help me please?
    Because the iPhone without iTunes is worthless for me...
    Thanks in advance!!!

    Same issue here, tried all the recommended solutions, but no change: Iphone shows in Windows, but Itunes does not recognize... (same issue on 2 different computers, phone itself is OK, it shows on other computers, just not on mine...)
    Message was edited by: DrSBos

  • Iphone is not showing in Itunes after Ipad

    I have my iphone 4 for 2 years now and it works with my itunes flawlessly, until recently I bought my Ipad 3.
    Ipad 3 cannot be seen in itunes, so I googled it and did this steps.
    Disconnect Apple tablet from computer.
    Go to C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers folder on your PC
    Locate usbaapl.inf file in this folder, right click on it and choose install
    After installation complete reboot computer
    Connect your iPad. For now on it should be in the device list on iTunes.
    I updated my itunes too.
    Now my Iphone is not showing up!  Tried connecting my ipad and it works without problem.
    Tried everything on the net.  Even did this:
    1. Open Start Menu >> Run and type services.msc and press ok [ this will open up services ]
    2. Locate the service named Mobile Device Driver  
    3. Double click the service to open properties
    4. In the "general" tab find the "startup type" drop-down arrow menu and make sure "automatic" is selected.
    5. Also see the general tab to check the "service status". If it does not say "started" then click the start button to start the service and connect your phone again and click apply.
    Note: If the above procedure does not helped in your case, then try restarting the service
    Both my devices can be seen on my PC, just not iphone on itunes.
    Rebooted my phone too.  Restoring is my last option....

    when you googled to find out what iPhone error 1604 meant, what did you learn?
    what steps have you taken thus far based on what your understanding of the error code meant?

  • Ipod not recognised by iTunes after latest Ipod Updater Software loaded

    Hi
    Can you please help as I can't get my Ipod to work anymore with iTunes. I recently did a "clean-up" of my computer and removed a lot of old files to speed up my computer and whilst doing this I upgraded my iTunes software with the latest Ipod Software Updater. However, I can't get my iPod to work with iTunes anymore. I plug in my iPod and it starts to say "Do Not Disconnect" on the iPod screen but then it doesn't show up in my iTunes so I can't update my iPod.
    I tried to use the iPod Software Updater "Repair" option but this just freezes my system and doesn't recognise my Ipod. I also get the error "Write Failure on this disk" showing up in the icons near my Computer Clock when I plug in my Ipod.
    I've tried doing a system restore back to when the ITunes worked with the Ipod but this didn't fix it. I've tried removing iTunes and the iPod from my computer and then reinstalling them from the software from apple.com but it still doesn't work. The problem being is when I've deleted ITunes and the Ipod Installer I've lost my original HP + Ipod installation disk so maybe I'm missing some essential system files? I've used the Ipod Software Installer from apple.com to install the iPod files but I'm not sure whether I need the files from the original installation CD. Can I find the installation CD files from anywar
    Please help!!
    Thanks in advance
    Amanda
    Ipod 4G Click Wheel   Windows XP   Lost HP + iPod installation disk so used iTunes and Ipod Software Updater software from apple.com

    Bump..please help!

  • IPhoto Albums not seen in iTunes after iOS 6 update

    I upgraded a 3rd gen iPad and an iPhone 4 to iOS 6, then updated my Macbook Pro (2.4 ghz quad core i7, 8GB RAM) to 10.8.2 with the requisite iPhoto update.  Now, iTunes will not show my iPad even though wireless sync is enabled, unless the iPad is connected to the laptop via the docking cable.  Both iPhone and iPad error out on synch with an error 1140 if synching photos is enabled.  Under the photo tab, the button to have "selected albums, events and faces" is grayed out.  So I can only select to sync ALL photos or none.  I believe the error 1140 is stemming from my library being too large to sync to the i-device.  In any case, I can no longer choose certain albums that were enabled under iOS 5.  The area below these options in the Photos tab in iTunes also does not show any albums, where it used to do so in a grayed out fashion even if that option was not selected.  Major issue here.  Have tried all the rebuild and repair of iPhoto library.  The kicker is that both the devices I upgraded have the exact same issue, so I'm thinking this is an update/Apple problem, not an issue with my devices or config.

    Ok, all.  I think I found the problem.  In searching for reports of this issue and solutions I found someone that mentioned they had fixed a similar issue with a "free" program called "iPhoto Library Manager."  The app apparently lets you split a library into multiple smaller ones or combine multiple libraries.  Generally it just "manages" your libraries.  I figured I had nothing to lose so I checked it out.  Turns out it costs $19.99 but they do have a free demo. 
    I launched it and it immediately told me that it couldn't display my library and albums due to an issue with the AlbumData.xml file on line 22155.  I read in the documentation of the app under it's "Help" menu that likely causes were a keyword with a "null" character at the end, or a file path being referenced inside the library that had an ampersand or backslash in it.  The person on the board I'd found had had a keyword issue.
    Anyway, I opened the iPhoto library by showing package contents (right click the file to choose this) and loaded up the AlbumData.xml file in TextWrangler, since that displays line numbers.  I found that line 22155 indeed referenced an mp3 in my iTunes library that had an ampersand in it.  Deleted that line.  Then it said line 22156 had an issue so I deleted that, at which point iPhoto Library Manager instantly displayed all my albums.  I checked iTunes and it too now showed my albums and the option to sync only selected albums was no longer grayed out!
    Per the Library Manager's instructions, I saved the AlbumData.xml file I'd modified.  The app said the iPhoto only writes this file out, it doesn't read it.  However, other apps read it to get your album info, hence the issue.  So I had to go into iPhoto and fix the problem, else the next time I exited the app, it would write the file back out improperly.  I noticed in the xml file that where the song was listed it was also referencing one of my albums.  So when I launched iPhoto, I went to that album and checked the slide show settings.  Sure enough, I had set a custom playlist for that album and listed the song I had seen on line 22155 in the AlbumData.xml file.  I removed that song from the settings, and exited iPhoto.  No more issues!  I appear to be all set!
    Now, I'm not clear if I NEEDED to edit the AlbumData.xml file.  Just looking at it showed the error and then I had to fix it in iPhoto.  So you can probably do that.  However, the iPhoto Library Manager software is the only thing I know of that could show WHERE the error was.  Since the free demo works for this purpose, I'd suggest giving it a shot.  This issue is obviously caused by our individual libraries and is not an Apple issue.  Now, the album that had the problem has existed for almost 3 years and I've never had an issue like this arise before so it's anyone's guess as to why it became a problem now.  Fortunately, it's all in the past for me now, though!
    Hope this helps someone.  Good luck!

  • TS1538 iphone isnt showing on itunes after the new update!

    my main problem is that my phone isnt showing up anywhere on my lapetop or itunes since the udate of itunes!
    and i tired doing re-installing the Apple Mobile Device USB Drive but i have Windows 8 and the directions are not listed for that software.

    i have the same problem. although my mac didnt ask for restart, installation stopped half way through the updating, and it comes up with unknown error 1 , once ive managed to exit recovery mode( the usb and itunes logo) apple logo appears, and then its loading and THEN ITS TURNING ITSELF OFF and ON - > after that apple apears - loading... and yeah goes in circles.
    I've tried to restore previous copy but itunes wont let me do it anymore, it comes up with an error.
    I've edited hosts, and it's still not working.
    ... any ideas anyone?

  • IPod Classic not recognised by iTunes after 8.1 update

    I upgraded my iTunes to 8.1 yesterday (on my iMac, OSX 10.4.11). Everything was performing fine until I tried to sync my iPod Classic (160GB).
    I agreed to an update for the iPod (1.1.2) but after that was completed, iTunes told me I'd have to restore the iPod to factory settings.
    So I did that, then tried to load all my music back onto the iPod. But while iTunes itself recognises my iPod, showing its correct name and displaying greayed-out track names, suggesting the music has been loaded correctly, the iPod itself tells me it has no music. I can see in iTunes that 100GB of the iPod's memory has been used up, but it is classifed as "Other" rather than as "Music".
    And confusingly, on the desktop, the iPod is not mounting with the correct name or even icon. It is mounting now like a white .dmg disk, and calls itself simply "iPod"
    Anyone else been experiencing these kinds of problems? Is it a problem with iTunes 8.1? iPod 1.1.2? Or both?

    Just bought my Ipod 120gb. early february and it was working well with my powerbook g4, 1ghz. running 10.4.11 and Itunes 8.02. Then upgraded to Itunes 8.1 which did not recognize the ipod and had to download the latest Ipod software - 2.0.1, then middle of my synching all my music back to the ipod itunes froze and i had to force quit. Then tried synch again, seemed ok. but my ipod said i have no music on it - although i had 10 GB data on the ipod according itunes summary page. I tried to restore back to original factory settings, synched again, same results - no songs on the ipod except unrecognizable data. I restored about half a dozen times, loading small batches of music only but same old same old. Did the usual permission repairs, ran cocktail, applejack, hoping for some miracle. Then i threw in the towel and cloned back my previous system from my external backup with Superduper- just cloned before upgrading to itunes 8.1 - which had itunes 8.0.2 on it and of course had to download the ipod software 2.0.1 and crossed fingers and synched again and this time it worked as supposed to. All my music and videos are fully functional on the ipod. Just wanted to share what worked for me...

  • IPhone not appearing in iTunes after 3.1 update

    Hi everyone....I went to update to the 3.1 OS for my iPhone 3G but during the update it got stuck at the "connect to iTunes". I have uninstalled iTunes and AMD services multiple times. I managed to restore the phone but after the restore it doesn't appear in iTunes and the screen is now stuck at "emergency call" now and "connect to iTunes" and can not restore my back up data. My computer doesn't seem to recognize my phone at all but does recognize my iPod touch. If anyone has any sugestions on how to get it to work I would appreciate it because I really need to get my phone working properly.
    Message was edited by: APHL

    I'm having a similar problem. I was running the same update. Not only does I-Tunes fail to recognize my I-Phone, my I-Phone is not operable. It just displays the moving circular icon in the middle of a black screen, as if it's doing something. What a drag.

  • IPhone not appearing on iTunes after IOS 5 update

    After installing IOS 5 iTunes update the computer asked to re-start my PC.  I beleive that my connected iPhone 3GS was still updating so, when the computer re-started, the update to the phone terminated.  After re-booting iTunes has been updated but my iPhone just has the image of the USB cable and the iTunes logo on it.  Nothing I now do makes the iPhone appear on the iTunes directory.  I have successfully installed the new firmware onto another iPhone 3GS but the original phone is unresponsive.  Anyone know how to install the software onto the phone when it doesn't appear on the iTunes directory?

    i have the same problem. although my mac didnt ask for restart, installation stopped half way through the updating, and it comes up with unknown error 1 , once ive managed to exit recovery mode( the usb and itunes logo) apple logo appears, and then its loading and THEN ITS TURNING ITSELF OFF and ON - > after that apple apears - loading... and yeah goes in circles.
    I've tried to restore previous copy but itunes wont let me do it anymore, it comes up with an error.
    I've edited hosts, and it's still not working.
    ... any ideas anyone?

  • Iphone 3G not appearing in Itunes after 4.1 update.

    I'm having this problem with my Iphone 3G. I updated to 4.1 and i was going to sync all my apps and music when my iphone wouldn't appear in itunes. I've tried everything restarting my computer and everything i think it is that the ipod services and itunes helper are not running but when i try to turn them on they fail. can anyone help?

    I'm having a similar problem. I was running the same update. Not only does I-Tunes fail to recognize my I-Phone, my I-Phone is not operable. It just displays the moving circular icon in the middle of a black screen, as if it's doing something. What a drag.

  • MP3 files not showing in iTunes after importing from Windows PC

    I have my MP3 music files saved on my computer. For some reason when I try to import a particular folder to iTunes Library, only 3 of the 11 files in the folder show up. Why aren't the other 8 showing up? Can anybody help me with this?

    For one of the problem files, right-click it and choose Open With > iTunes.
    If the file is compatible, it will start playing and be added to the library.
    If iTunes "errors silently" (i.e. does nothing) it means the file is incompatible.  If you are sure it is a valid MP3, treat it with a 3rd party tag cleanup program such as Mp3Val.  That usually suffices to make iTunes happy.

  • My ipod does not show in itunes

    Hello - Please help me if you can, my ipod does not show in itunes nor can i update my ipod. Please don't suggest that I update my itunes because i had aloooooooot of trouble with the new itunes 6.0 or greater (something is wrong with that update)and i just lucked into installing the older version which was given with my ipod. My music is there but I can't get my songs - is there any way I can get my songs to go to my ipod with this problem? Thanks for any assistance.

    Welcome to Apple Discussions!
    Windows Does Not Recognize iPod
    Also, a new version of iTunes was recently released. You may want to try that, but it is up to you.
    btabz

  • My 5th gen nano will not sync win 7 .says connected but not show in itunes. driver is updated ,working properly ....help

    my 5th gen nano ,has updated driver ,working properly. ipod connected but not showing in itunes ?

    By the way, I totally restored everything. It was ok. It starts to 'unrecognize' my iPod Classic when it comes to synching with iPhoto. After this happened all the menus disappeared from my iPod (music, Podcasts, movies synched fine). It seems to be a problem when synching with iPhoto. It was the same thing before.

  • My iPod nano 5th generation is not recognized by iTunes. I did update, but still, it won't work. I don't want to uninstall the iTunes cos  I don't want to lose my music and audio books. What to do? It started after I updated iTunes.

    my iPod nano 5th generation is not recognized by iTunes. I did update, but still, it won't work. I don't want to uninstall the iTunes cos  I don't want to lose my music and audio books. What to do? It started after I updated iTunes.

    iPod appears in Windows but not in iTunes

Maybe you are looking for

  • How to stop the backup process....

    How to stop the backup process.... Okay, so it happens nearly everytime you synch your iPhone with your iTunes? Easy. As soon as it starts, hit the "X" in the bar where the backup process is being shown, this does NOT STOP the synching process, ONLY

  • Global_db_name

    Hi just installed oracle 10g, and set the global name to databasename during installation. didnt provide a domain prefix. however, when i now query the select * from global_name it displays databasename.REGRESS.RDBMS.DEV.US.ORACLE.COM Is it of no ris

  • Infinite Attempts on a slide

    I developed an interactive activity with the assumption of Infinite Attempts (like you can set on a button). The activity has the user select 6 questions from the available 8. My plan was to "count" the number times the slide was "attempted" and when

  • Upgrade CC from 4.0 to 5.2 vs 5.3

    Hello Experts, my customer has upgraded R/3 to ECC6 and is willing in parallel to migrate its GRC applications to the newer standard. We just put CC 40 to date without big advantages. Can you advise whether to go for 5.2 immediately or wait for 5.3 l

  • Converting handwritten notes: analogue to digital conversion?

    I have a box full of handwritten notes that I would like to convert to a digital format (jpeg or pdf), but I know nothing about these formats and so don't know the best method to do so: scanning is feasible, but terribly, painfully slow. I would pref