Not Showing in RSA1

Dear All,
i have created the data source in the source system and i have transported it to production. but now when i go to the RSA1 transaction in BI and in datasource section, the particular application component doesnt show. why is this?
Regards,
DTD

Hi,
How did you replicate the DS
as 3.X or 7?
Also once the DS is replicated for the first time, it will be always avilable in Inactive version.
If you replicated as 7.X DS
Just right click on the DS--> Activate DS.
If you replicated as 3.X DS (you can see a small sqaure shape just beside DS)
Just right click on the DS--> Activate DS --> This will take you to transfer structure which needs to be activated. Once you activate this DS will get activated.
Once the DS is activated then you can create infopackage & load the data for the same.
Regards,
Pavan

Similar Messages

DTP is not founding in RSA1

Hi All,
I transported DTP from Dev to QA. Import logs are showing RC = 0. But DTP is not showing in QA.
DTP is there in QA Metadata repository.But it is not showing in RSA1.
How we will solve this error.is there any process to resolve this issue.Could you please help me.it is very Urgent.

Dear Chang,
If the transport is successful then there is not point of missing DTP in QA. Refresh the subtree and check for the same. or . Check the complete log of transport . and also check the request from Development if it is containing the DTP u wanted to transport. It can happen that you missed in the request and the transport is successful then the object is not seen in QA
Thanks,
Krishna

Hierarchy node Variable: F4 Help - Not showing Master data values

Hi,
We're having some problems trying to display the F4 help of a hierarchy node selection variable, to show the master data values so that it would look more complete for the users during report execution.
In the RSD1 setting for the info object, under 'Business Explorer' tab, the 'Query Execution Filter Val. Selectn' is set to 'Only Posted Values for Navigation'.
I thot that we could overwrite this setting at the Query Designer level, but it does not seem to work.
Even tho in the Query Designer, we have already specified the 'Filter Value Selection During Query Execution' to 'Values in Master Data Table', it does not seem to display the master data values.
There is no difference in the F4 values being displayed for the hier node variable, before and after the change in Query Designer.
Could anyone share some tips on other possible solutions to get a hier node selection variable's F4 help to show the master data values, without changing the RSD1 setting at the info object level please ?
Thanks in advance for your help.
Regards,
Femmie.

Hi,
Could you please share the steps you have taken to fix the problem?
We do have a similar problem and for some reason the newly added hierarchy node for 0Profit_ctr is not showing up in the variable selection screen F4 (input selection for query execution). However we can see this node when we display that hierarchy in RSA1. I did try applying the changes recommened by Jerome but unfortunately it didn't work.
Any help on this would be greatly appreciated.
Thanks,
Krish

Query not showing field discription in another language login

Hi Experts,
when i am running query as default language, query output is perfect.
But when i am changeing language and DE (Danish) at SAP BW login then
1) query is not showing field description at Selection Screen rather only displaying technical name
2) at query output there is no report title and column heading
Please suggest how to set language property for entire query
i guess system not able to convert language from EN to DE.
what and where setting need to change
Thanks in advance

This why at the beginning of a project you say this is English and all user shave to log in via English or if not then you build into your quote a huge amount for translation
Have a look at the help files about the translation workbench in BW - it's big and it's a expensive and time consuming thing to do
The two descriptions are stored in the query element text tables and for info objects in their specific tables- yep I suppose you could hack them - but you may end up causing more problems than it's worth
If it's a simple case of some queries need translating in a small number of languages then it's as simple as splitting yoru screne into two and loggin in twice one in english the other in the other language - first in RSA1 to change the infoobject and then in query designer (following the key strokes you use in ENglish if you language skills aren;t that good int he other languages)
The other alternative as mentioned above is using the trsnaltion workbench - but the cleitn will have get the cheque book out as it can be quite a costly exercise

IP - Aggregation Level not showing in Query Designer as infoprovider

Hi guys
I just started implementing Integragted Planning at a new client. I created an aggregation level to build my input ready query. However this aggregation level is not available as an inprovider in the Query Designer nor is it available under the infocube in RSA1 on which the aggregation has been defined.
Any suggestions?
Thanks for your help.
Ameya Kulkarni

Hi Mayank
Good point. But I could not see the aggregation level whatsoever in RSA1. The aggregation level is consistent and activated but does not show in the query designer.
I was wondering if there is some configuration that I have to do to get the aggregation level available in the query desginer.
Please let me know.
Thanks,
Ameya Kulkarni

F4 not showing values for Variable

Hi Everyone,
In BEx Web analyzer, the one of variable not showing values after pressing F4 but for the same query if we execute in BEx analyzer it shows the variable values.
How we can rectify this issue for BEx Web Analyzer?
Please suggest..
Thanks
Kind Regards
Anukul

Hi,
Just check following setting are also done.
transaction RSA1 -> Query-infoprovider -> "display" -> look for the relevant infoobject -> right-mouse-click -> "provider-specific Properties" -> "Query Exec. FilterVal"
Set this option to "Master Data" and recheck the behaviour.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20ecb78c-374a-2d10-c6af-f024f19b785d?QuickLink=index&overridelayout=true
If above doesn't help pl check for sap note.
Thanks and regards

Creating Aggregate--Master data not showing:

In a Cube, following this instruction I get the table below:
Goto rsa1>Infocube>manage>select the Infocube>Click contents>select tab "field selection for output">selectall>execute>execute.
CustID CustID MatNo MatNo SalesRepID SalesRepID SalesRegion SalesRegion SalesOff SalesOff
cust001 -
2mat001---2 -srep0120--
0
cust002 -
3mat002---3 -srep0230--
0
cust002 -
3mat003---4 -srep0230--
0
cust003 -
4mat003---4 -srep0340--
0
cust004 -
5mat004---5 -srep0450--
0
cust004 -
5mat005---6 -srep0450--
0
I have already verified and both Sales Region and Sales Office have the master data but browsing the cube gives the above figure, showing Sales Region and Sales Office as blank in the first column and 0 in the second.
The master data for all these characteristics are already active
a) What can I do to fill the Sales Region and Sales Office columns, because that may be the solution to this problem in b) below
b) I have added three infoobjects to a new aggregate that I have created. Any reason why for Sales Rep, Sales Region and Sales Office, maintaining master indicates that they all have master data; and each of these InfoObjects has been activated, but while creating the aggregate, attempts to assign Fixed Value to each of these IOs works only for Sales Rep. i.e. only Sales Rep showed the master data. Why are the other two IOs not showing their master data?
What do I need to do to see the master data of these 2 infoobjects in the Aggregate maintenance screen, just like the Sales Rep infoobject?

<u>What I did based on your advice:</u>
Thanks for the hints, it looks like we are up to something.
Under the InfoSource tree, I selected the InfoSource on which the Cube is based. Under this InfoSource, I selected Communication Structure, right-click on blank space in InfoObject column, then selected Choose Possible entries, then selected Sales Office, and later used the option Choose in the context menu to populate the row with the details. Same was repeated for the Sales Region.
Under the Transfer Structure/Transfer Rules, the same process was used to insert the Sales Office and Sales Region in the Transfer Structure and Transfer rules tabs. i.e. the field to InfoObject mapping was maintained in the transfer rules.
There was a RED X, but after I selected Propose Transfer Rules, the RED X went away.
<u>Result of above active:</u>
I thought I was good to go but still on checking at the Aggregate Maintenance options, the values for these two Infoobjects were not available.
Now back to the Cube: Under the Cube, on the InfoSource beneath it, I right click and choose Update Transfer Rules but got a message that
due to changes in other objects, this update rule was set to inactive
Do you want to reactivate?
I chose Yes but got an error:
IC=IC_D IS=IS_D error when checking the update rules
It is basically stopping me from reactivating the Update Rules, so what is the work around up to this point?

Hierarchy node in query rows not showing values in report

Hi sdn
I'm taking hierarchy node on rows and some plan and actual values on columns but i'm unable to get values in the report for only plan values
How did I reconcile the values whether that value is available in hierarchy or corresponding value's for plan data is available in the cube,pls give me clues
rubane

Hi,
Could you please share the steps you have taken to fix the problem?
We do have a similar problem and for some reason the newly added hierarchy node for 0Profit_ctr is not showing up in the variable selection screen F4 (input selection for query execution). However we can see this node when we display that hierarchy in RSA1. I did try applying the changes recommened by Jerome but unfortunately it didn't work.
Any help on this would be greatly appreciated.
Thanks,
Krish

IO is active in BC but not visible in RSA1

I have installed one IO '0PO_NUMBER' from Business Content
and have saved in local object.Following way I installed the
infoobject,in the right hand pane its showing active but its not
visible in RSA1.
Steps
1. Dragged the perticular IO-PO_NUMBER to the right pane and dropped there.
2. Grouping - In data flow before
3. Collect - Automatically
4. Install - Install
Now IO is avtive in BC -right pane where we used to drag and drop the IOs.But in RSA1 its not found.
Could somebody tell me why its not found ?

Hi BI Experts,
The standard IO that I have installed successfully form
Business Content is showing active but its not visible in
BW system.
Then again,I have deleted the IO form RSD1 and installed
it and got the same result as it was before.
Your suggestions are welcome.
Apart form this,Please tell me how to find inactive IOs in
BW system.
Thanks

ITunes does not show up on apple tv 1st gen.

i have a 1st gen apple tv with the 160 gig HD. recently, it will not show the itunes site. Under teh movies tab there are my movies and trailers and that's it. Does anyone know how to get the itunes store back on apple tv?

Known issue currently, you'll need to wait for the fix.

My downloaded text sounds do not show up under the sounds tab in settings after installing 8.1.1. can someone help me please?

i downloaded a couple text tones and since installing 8.1.1, they will not show up under the sounds tab. in fact, they do not show up in my recent purchases on itunes, but when i go to buy them again, it says that i have already bought this tone. I just want to use the tones i paid for as the tones on my phone. not asking much.... thanks for the help. i hope someone can help me get the tones working. thank you.

This was happening to me too but only for some of my songs. I have a mac so I dunno about PCs, but for most of my ringtones I had to create an ACC version in itunes to make them short enough then turn that into a m4r and those all worked fine. But if the song was already short enough and I didn't create an ACC version and just turned the original into a m4r, then it wouldn't appear in my itunes.
so if you're on a mac:
1. go to get info, options, pick when you want the song to start and end.
     Has to be pretty short to work, 30 second or less is good
     if it's already short enough that's fine
2. right click and click 'create ACC version'
     a copy with the length you put in will appear, drag that into a folder or whatever and just type in m4r where m4a would be
     still make an ACC version even if it's the right length
Hopefully this helps someone else.

Internet Streams in Playlists do not show up on Apple TV

I use the following setup:
- Apple TV MD199LL/A (Software 6.0.1) just updated to the latest
- iTunes 11.1.3 for Windows (from a Windows 7 x64)
- iTunes 11.1.3 for MAC (from a Apple MacBook Pro x64, Maverix)
Homesharing is turned on both computers
From both machines I share pictures, videos and music.
All photos, videos and music files are getting displayed on the Apple TV menu, and can be played.
All iTunes playlists from both machines are getting displazed on the Apple TV
BUT!
If a internet stream is added to a playlist, this entry does not show on the Apple TV menu.
If the playlist contains only internet streams the Apple TV menu says "There are no songs in this library"
If I hit the play key on my remote, it will randomly play the first stream in the playlist (not realy reproducable pattern)
I can play those streams in iTunes and send it via AirPlay without problems,
Can anyone help me with this and tell me what I'm doing wrong?
Thank you

You can only view that rental on the iPad. For it to show up it has to be rented directly on ATV or through a computer and streamed via home sharing

When I sync my iPod to my MacBook through iTunes new events do not show up and old events are not deleted. I am using Snow Leopard and not iSync.

I am using Snow Leopard on a MacBook. I have an iPod touch 3G. I do not use iSync it Mobile Me. When I sync my iPod through iTunes new events on my iPod do not show up on my Mac and old events do not delete. I have read help instructions that include deleting the data on the iPod. The iPod has the correct data and the Mac does not so I have not followed those instructions. I need help as the only reason I bought the Mac was to be able to sync, back up, view and print my calendar. Currently it is useless. If only Apple could have learned from the elegance of the Palm software.

Start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

Synced videos do not show up on iPod

Every time I sync my iPod with iTunes, although iTunes says the videos are synced, they do not show up in the Video app on the iPod.
This is a fairly new problem. All these videos have been synced before and they all showed up just fine in the Video app, but as of late the iPod does not show them. Searching for them yields no results.
The videos are in a compatible format and do not have an extremely high definition. Again, I do not think the problem is with the videos, because previously I was able to view them all just fine.
I have at least 1G of memory left, 2G without syncing the videos.
I have erased and re-synced them in iTunes, to no avail. I can play the videos on the iPod from iTunes, but not on the actual iPod device. I'm using windows iTunes, and it is up to date. The iPod software is up to date. I don't want to do a restore because I've already done that multiple times for multiple issues, but if that's what I have to do, I will. It's a pretty old iPod. I'm syncing with a third-party Duracell cable, but I really don't think that's the problem.
I'm not sure what it means, but in iTunes I have checked the option that reads, "Prefer standard definition videos". Syncing with that option unchecked changes nothing so far as I can tell.
Thanks for all your help!
iPod Touch 4th Gen. 8G
iOS 6.1.6
1G free with videos, 2G free without
iTunes for Windows 64-bit V12.1
Duracell 30 pin to USB iPod cable

Try:
- DFU mode and then restore to factory settings/new iPod via iTunes
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
- Try with a new video

Files do not show up on HDD

I tried to get an answer through the iTunes community, and was advised to try here instead as it didn't have anything directly to do with iTunes
Not all iTunes Files not showing up on External HDD
So in a nutshell, all of my 35'000 iTunes files (actual MP3 files) were saved on a TC 2.0TB disk and used on multiple Mac's to pull music from. All music files would be saved and streamed wirelessly from this TC and nowhere else.
I would always add files to this external wireless client and iTunes would work flawlessly playing whatever song I chose through the library.
If I would go in to the iTunes directory (path) and look up files on the HDD the files were just not there (but if clicking on the link through iTunes - show in finder - they would appear on the HDD but only through this method). I gave it no further thought until my TC died (i.e. no longer powers up) on me...
I removed the HDD from the TC and placed it in an USB cradle and after looking into the iTunes folder there are only a fraction of the folders / files much less than expected... When I do a cmd-I I'm told that there are 35'000 files, but they just won't show up.
Any ideas on how i can get all the files to be displayed as I want to copy these over on a new TC and need to map iTunes to this new location/path?

Hello Jfrosa,
Thank you for the details of the issue you are experiencing with File Sharing. I found an article that should help with troubleshooting this:
OS X: How to connect to Windows File Sharing (SMB) using Snow Leopard or earlier
http://support.apple.com/kb/ht1568
Thank you for using Apple Support Communities.
Best,
Sheila M.

Not Showing in RSA1

Similar Messages

Maybe you are looking for