Not showing last value in report

Hello,
I am having a report with new selection and i want the last value in result area and for this i have selected 'Calculated result as Last Value' in properties but it is showing me the summation of all value.so could you please tell me how do i get the value for this.I am using BW3.X.
Thanks & regards,
Anoop Chaturvedi

Hi Anoop,
  You need to keep setting as calculate result as ' Last value' or exception aggregation to last value.
As you are in production, to check whether it is working or not in production, run the report in RSRT, go the key figure right click and go to enhanced menu, and then in propeties, and then in kf properties you can settings like calculate result as , no of decimal places, sorting(these options which you design in Query designer), make it as last value under calculate result as and transfer the selection.
This should work and then you make the change in dev and transport.
Regards
vamsi

Similar Messages

  • Report similar to MC$4 that does not show absolute values

    Hi all,
    We need a report similar to Report similar to MC$4 which has the same drilldown capabilities but does not show absolute values, and instead shows the proper (actual) values.
    Or if its possible to change something in the MC$4 report to show the actual values and not the absolute.
    Thanks in advance!
    George

    HI
    Your input criteria should contain all plant numbers and the period to be analyzed.  Execute the report and then select:  Plant Analysis\Export\Transfer to XXL\Deselect all options and tick Plant, Storage Location and Month.  Follow the options to export to Excel.  Report will be based on Plant, Storage location and Month.
    Regards

  • Using transactio code to execute a report does not show default value

    Hi all ,
          I have given a default value of a field on my selection-screen by initialization in a hr report .
    I am using PNP database and default selction-screen in hr report category .
    While the report is working fine while executing directly , It is not showing default value when executed through a transaction code .
    Can any body tell why it is so ?
    Thanks & regards
    Sun

    Did you create the transaction as a report transaction?
    Rob

  • Filters not showing up values

    Hi Gurus,
       I am working on some reports in WAD.
       I have characteristic "Region" which has 4 values like EAST,WEST,SOUTH,NORTH. This is a User Entry so I created a variable for this and it shows the values with check boxes beside it when you click on the variable entry screen input help. Once I execute the query the result is displayed. When I click on the Filter ICON on the Navigation Block for REGION it is not showing the Values for this region but just shows only 4 check boxes.
    This Characteristic doesnot have master data. It is displaying the KEY values.
    For the characteristics which Master Data it is showing the values both in Varaible selection screen and also in Filter Selections.
    Please update me with a solution.
    Thanks,
    Raj

    have you tried replacing it with the file essbase.bak_startup file, instead of the older essbase.sec file?
    If you check your app folders you will still be able to see the cubes you had created its just that Essbase can't pull those up with the older .sec file.
    The essbase.bak_startup file is always updated everytime the Essbase server is started up.
    Be sure to take a backup of the file before starting up the server again.
    The reason your essbase.sec and essbase.bak files are both corrupt is because when you first discovered that the essbase.sec file is corrupt it was when you started the server up.
    What you need to keep in mind if the machine which holds the essbase server shuts down abruptly or crashes (which usually leads to the situation you are in) is to never start up the Essbase server right away, as you may have a corrupt essbase.sec file, and if you start up the server without taking a backup of the essbase.bak file you may risk corrupting the essbase.bak file as well.
    This is because at start up the essbase.bak file gets replaced with the essbase.sec file.
    let me know if this works.
    Regards,
    Anindyo

  • ST03N Tcode not showing last 3 days average response time

    Hi,
    In my Production system not showing last 3 days average response time.In our production 1 (CI+DB) and 3 dialog instances are there. In all servers sapcollector working fine but in all servers not showing last 3 days values.Please advise solution.
    Thanks,
    Srinivas.

    The following are the prerequisites needed to get the workload monitor(st03) working.
    1)      The system time zone of the SAP and the Operating system has to be same. This can be done by customizing time zones of the SAP using the Tcode STZAC.
    2)     All the standard background jobs has to be scheduled to run. This can be done by scheduling the standard background jobs using the Tcode SM36.
    3)     The following parameters has to be added to the instance profile.
    Parameter                                                  Value(default)                                                  Description
    i.     stat/as_collect                                                          = 2                                          Application statistic: detailed records.
    ii.     stat/as_level                                                              = 1                                          Records for application statistic are active.
    iii.     stat/max_files                                                           = 48                                        Max. no. of stat files to be kept.
    iv.     stat/as_max_files                                                    = 48                                        Max. no. of appl. stat files to be kept.
    This can be done by editing the profiles using the Tcode RZ10.

  • SelectOneChoice not showing all values from database

    Hi!
    I have to put a list of values in my select one choice. When I do the query in database, all the values are selected. But, with the same query on JPQL, the select on choice do not show all values in database. Anyone can help me, please?
    P.S.: I am using SelectOneChoice with SelectItems, in JDeveloper 11g
    Code:
    <af:selectOneChoice id="selAction" value="#{row.idCmd}"
    unselectedLabel="&lt;Selecione>">
    <af:forEach var="alertTypeNode"
    items="#{bindings.actionFindAll.iteratorBinding.allRowsInRange}">
    <af:selectItem value="#{alertTypeNode.dataProvider.idCmd}"
    label="#{alertTypeNode.dataProvider.nmCmd}"
    id="si1"/>
    </af:forEach>
    </af:selectOneChoice>

    In your page binding check the rangesize setting for the executable you use - set it to -1.

  • Excel is not showing multiple Drill thru report selection option

    We have created 3 drill thru reports in EIS, excel is not showing Select Drill-Through Report Dialog Box when tying to acess drill thru reports. It defaultly executes the first drill thru report, we want it to list the available reports so that we can select accordingly after view/launch is selected.
    essbase 7.1.6 version SQl server 2000

    Hi,
    This Prompt message would have been set in WAD(XHTML Coding section) in your old project. Now , you cross check your Web template for the same. Your issue will be resolved.
    Regards,
    Suman

  • Designed Reports are not showing in the Analysis Report List

    Hello Master's,
    I have designed one report as per our client requirement, and assigned also, but its not showing in the analysis reports list.May i know what setting needs be done to appear in the reports list?.
    How to create and add the characteristics(New Fields) in the reports, here we can able to create and add the key figures.
    Kindly update the solutions with steps.
    For you reference please find the below screen shot.
    Thanks in Advance......!
    Kind Regards
    Shankarappa H L

    Hi Shankarappa,
    The Analysis -> Reports shows a list of views. Hence, once you create a report you need to complete two mandatory steps.
    1. Create a View
    2. Assign Report
    For more information, please refer to the following link: In conversation with Sebastine Augustine, product manager redefining Business Analysis that forms an integral part of th…
    Thanks,
    Sebastine

  • ME23n , Does not shows the values correctly in print preview

    Hi,
    When viewing a PO using ME23n , it does not shows the values correctly in the print preview.
    For example;
    This is the vendor & its address.  (check attached image img1.jpg)
    ZERANDIB BUSINESS APPLIANCES
    Number-122/A
    PO BOX 41,112,REID AVENUE
    COLOMBO-04
    When displaying the print preview, it shows only some parts of the above address
    Shows only; (check attached image img2.jpg)
    ZERANDIB BUSINESS APPLIANCES
    PO BOX 41,112,REID AVENUE
    These values are getting from a table called LFA1. I have checked that table & in that table all the values exists correctly.
    I have noted issue is with, having only a single word. (If address or name having only a single word, that is without spaces, it will not going to show in the print preview) -
    In the above example, it is not showing Number-122/A and  COLOMBO-04 (Its a single word. No spaces there)
    If its like --> Number - 122/A   &  COLOMBO - 04 ,  then it will display in the print preview correctly (where there are spaces after - mark)
    check img3.jpg
    If its having more than one word, then it will display correctly in the print preview.  As below;
    ZERANDIB BUSINESS APPLIANCES
    Number - 122/A
    PO BOX 41,112,REID AVENUE
    COLOMBO - 04
    If its 2 or more words, it shows correctly.
    If its 1 word, then its not showing!
    Why it is happening like that? Any ideas how to resolve this issue?
    regards.
    zerandib

    It turns out that this problem went away after the program crashed.  Everything seems to be working well now.

  • OBI columns not showing distinct values.

    Hi,
    Please help me out with the below issue.
    I have a colulmn called Product Type. Same column is been pulled into many subject areas. In one of the subject area the column when checked for all product types, it is not showing distinct values, instead it displays multiple rows of sinlge value. Whereas in other subject areas it dsiplays distinct values.
    So please help me out on this issue.
    Thanks,
    Rajesh S

    Hi,
    I don't think it's not an issue with not selecting "Select Distinct Value" checkbox .. because same column pulled into to other subject areas working fine. But here also sometimes it shows correct distinct value and sometimes all values(Duplicate values).
    Thanks,
    Rajesh.

  • PO not showing committment value

    Hi All,
    I am an FI consultant. We have a issue where PO is not showing committment value. Could you please sugget what can be the possible reason.
    Regards
    Deepak

    Hi All,
    further to add this:-
    Our PO value is 815525 GBP & invoice value is 744707.52 GBP.
    our PO qty is 1 & invoice qty is 3.
    Please help.
    Regards
    Deepak

  • PO not showing commitment value

    Hi All,
    We have one issue where PO is not showing committment value. Could you please guide whether this can be becasue of any problem in WBS element or cost element.
    Please suggest.
    Reagrds
    Deepak

    Hi Deepak
    1. Check if Commitment Management is active in Contr Area (OKKP)
    2. Check if Commitment mngt is active in Project profile / WBS element
    3. There is a program for Int Orders, RKANBU01 which updates missing commitments for Int Orders.. Its called RECONSTRUCT AVAILABILITY CONTROL
    See if RKANBU01 or similar program is there for WBS also
    Br, Ajay M

  • IPhoto does not show last import

    iPhoto does not show last import. When I try to re-import photos from a desktop file it says the photos are already in the iphoto library and cannot be imported. What do I do? I've already re-installed iPhoto 09 and run updates.

    Are you saying that the last import is not showing in the last import section of the source pane or is not in the Events in the library window? If you do not see the event then your camera has the wrong date - look in the last import album and find the date and then go to that date in the events - it will be there - if you want you can then slelect the photos and use the adjust time and date command to fix it - check change original files
    LN

  • Query is not showing the values - authentication error

    Hi,
    After running a query it is not showing the values and showing <b>"You do not have the authorization for the selected component."</b>
    Diagnosis
    You do not have the authorization for the selected component.
    System response
    The selected component cannot be edited.
    Procedure
    lease speak to the person responsible for authorization, if you require authorization for the editing of this component. The function is protected by the object "Business Explorer - components" with the following fields:
    InfoCube ZPLAYOPPT
    Type of a component REP
    Component PLAYBOOK_OPPT_1
    Activity 16
      Notification Number BRAIN 800 
    <b>Can u pls tell me the solution.</b>Thanks and Regards,
    Giri.

    Go to SU01, look at your authorization profile for which roles you are given. Then, go to PFCG and check out the roles and how they are defined. It is possible that you are not authorized to view application area, infocube, certain characteritics etc.
    Hope this helps,
    Regards,
    Petter

  • Report S_ALR_87012000 Asset Register does not show correct values sums

    Hi,
    I've taken a look at S_ALR_87012000 transaction - Asset Register (Italy) after an Assets Data transfer and something strange happens:
    1-  the sum of column Depreciation for year is not correct. It is a little bit strange because the single assets depreciation for year is correct. The same problem is in report S_ALR_87011990  - Asset history sheet
    2- if I put  an asset number range or the asset class in the report selection screen the report does not show some of the assets included in the range or in the asset class.
    Could you explain me why? Is there some program bug?
    Thanks in advance
    Giovanna

    Hi
    If you are executing the reports for previous / future years - execute them as of last day of the fiscal year
    The execution for current year can have any date of the fiscal year for report execution
    BR,Ajay M

Maybe you are looking for