Not showing pics in Book mode

I started putting together a book and all the pics were showing up fine in the main book view. But I had an error and iPhoto quit unexpectedly. When i went back, the book was still there but nearly all the photos had low-res warnings in the top icon view and were replaced by exclamation point icons in the book view.
Is this normal for low-res pics to not show up at all when viewing the book? And some of these pics DON'T have a low-res warning and ALSO are replaced with the ! icon in my book.
Thanks for the help!
macpro 2.66ghz Mac OS X (10.4.8) 20in Cinema Display

twotone:
Welcome to the Apple Discussions. Are you able to view them in the edit mode in the main library? That unexpected quit of iPhoto has corrupted the database file, Library6.iPhoto. You can try to rebuild the library as follows: launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select all of the options. I'm not optimistic that it will work.
If the rebuild doesn't work you're best option is to start over with a new library and import the Originals folder from the old library as follows:
1 - move the old iPhoto Library folder to the desktop.
2 - launch iPhoto with the Option key depressed and, when asked, opt to create a new library.
3 - with the new library open drag the Originals folder from the old library on the Desktop into the open library window.
This will create a new library with the same rolls as in the old one. However, many of the rolls will have different dates which can be edited in the Info window at the bottom of the Source pane.
To help prevent this same problem in the future read the tip at the end of my signature.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
G5 Dual Core 2GHz, 2G RAM, 250G HD; G4 Dual 1Ghz, 1.5G RAM, 80G HD, Mac OS X (10.4.8) QT 7.1.3, 22 LCD, 200 & 160G FW HDs, Canon S400, i850 & LIDE 50, Epson R200

Similar Messages

OBIEE : Newly created rpd file not showing in the online mode in Admin tool

Hi,
I have recently installed OBIEE 10.1.3.4.2 and Oracle XE databse in a Windows XP (Professional version 2002 Service Pack 3) virtual machine on my Windows 7 machine.
1) I have create an rpd file in Admin tool (all three layers). But I can only load this rpd file in offline mode, not in online mode.
a)Saved the file sanjay1.rpd in c:\OracleBI\server\Repository directory
b)Updated the c:\OracleBI\server\config\NQSConfig.ini (commented out the existing Star entry and replaced it with Star = sanjay1.rpd, DEFAULT;),
c)Modified the C:\OracleBIData\web\config\instanceconfig.xml and made change to the CatalogPath entry (<CatalogPath>C:/OracleBIData/web/catalog/sanjay1</CatalogPath>)
d)Stopped and restarted OC4J, “Oracle BI Presentation Server” and “Oracle BI Server” services.
But I am still not able to load sanjay1.rpd in the Admin tool in the online mode. It is showing up only in the offline mode. What do I need to do load the file in the online mode.
2)The existing Start entry in NQSConfig.ini was Star = samplesales.rpd, DEFAULT before I updated it. But samplesales.rpd is not showing up in online mode either. When I am selecting File/Open/Online a popup is coming up with title "Open Online AnalyticsWeb" and prompting to enter Administrator password. I would like to know why samplesales.rpd was not showing up in online mode and where is AnalyticsWeb coming from.
Thanks
Sanjay

Dear Muram,
Is did not work.
1)Wihile the servers were running I opened the rpd in offline mode. It displayed the message the file can only be opened in the Read-Only mode. I accepted the message, opened the file and clsoed it and exited from Admin tool. I stopped the 2 services “Oracle BI Presentation Server” and “Oracle BI Server” in that order, and restrated them in the reverse order. In the admin tool it is still showing in the offline mode only
2)I have as such no interest in AnalyticsWeb that is showing in the online mode. I did not create it, it must have been installed along with OBIEE. But I am curious where it is coming from. Because A)There is no rpd file for AnalyticsWeb in the Repository Directory B)Before I edited the NQSConfig.ini the default setting was samplesales.rpd. So AnalyticsWeb was never included in the NQSConfig.ini file C) samplesales.rpd was included in the NQSConfig.ini once, but it never showed up online.
Thanks
Sanjay

I changed my browser fill and the update does not show in the preview mode

I changed my browser fill and the update does not show in the preview mode. I saved and restarted muse but the problem is still there. Any thing else I can do? Could it be something that changed in the file?

Hello,
What did you put in the "browser fill" area, an image or a color? WIth gradient or with solid color? Also, does it show fine if you "Preview in Browser"?
Screenshots showing the Browser fill section (like this: http://screencast.com/t/RHqdVPP4) and the display in Preview mode would also be helpful.
Cheers
Parikshit

Background color does not show in a design mode preview

Hi,
I installed Macromedia studio 8 a couple of days ago, and
started using Dreamweaver 8 with a "Missing Manual" book. I'm on
first chapter and following tutorial. It says to change a
background color to blue, and I did that. But this change was not
reflected in a design mode preview. I checked the code and it's
there. I viewed in an IE6, and it was there. My coworker installed
an evaluation version on his pc and it worked fine. I guess it's my
pc that has problem. I had IE7 and VS2005 on the pc when I
installed Macromedia 8. Due to help crash, I uninstalled IE7. It
did not solve the problem, so I uninstalled VS2005 and related
programs, and it did not solve the problem. I uninstalled and
reinstalled Dreamweaver 8 a couple of times, and it did not help.
Does anyone out there who have similar experiences, please share it
with me? I post this here before redo my pc. Thanks.

<shrug>
Without seeing code, it would be impossible to guess....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"jaivora" <[email protected]> wrote in
message
news:[email protected]...
> This is way too much - I too am reading the same book
and am stuck at the
> same
> place - Not only does the background not appear in
dreamweaver, but nor do
> the
> new colors set for the active links, rollover links, etc
- After setting
> in the
> new colors, the "Page Property" section will not reflect
the new colors -
> While
> all the time Safari will show the page correctly.
>
>
>
quote:
Originally posted by:
Newsgroup User
> Do you also have the same exact code? That's where the
answer always
> lies....
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
> ==================
>
http://www.dreamweavermx-templates.com
- Template Triage!
>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
> ==================
>
>
> "LaValliere" <[email protected]> wrote
in message
> news:[email protected]...
> >I am having the same exact problem as the other
person, except I can not
> >find
> > the manual uninstall that seemed to fix their
problem. The funny thing
> > is
> > I am
> > reading the exact same book as they were and the
problem happen at the
> > same
> > point in the very first chapter. The background was
working fine
> > before.
> > Thinking back I realised the book said to go to the
website for any
> > updates,
> > which I did. After that . . . . no background color
is visible. I have
> > also
> > attempted to uninstall and reinstall. No luck. Can
you help?
> >
>
>
>
>
>
>

System fonts not showing in Font Book

I am using Font Agent Pro as a font manager and am wondering if there's a conflict with it and Apple's Font Book. I cannot get the system fonts to show up in Font Book and, hence, those (System) fonts don't show in Apple apps, e.g., Safari, Grapher, Text Edit, etc., etc.
The only way I can get the system fonts to show in apple apps it to drag the System>Library>Fonts folder to the "Collection" column onto the "Computer" collection. This is fine, but it copies the System fonts to the ComputerName>Library>Fonts folder.
I've tried for hours to get the System fonts to show in Font Book and do it without the System fonts being copied to the Library or User folder, i.e., I want the System fonts to stay in the System fonts folder only.
If I boot into another partition and bring up Font Book everything works as I would expect, and Font Agent Pro is not installed on that partition...
Any Ideas?
TIA,
Geoff
Quicksilver 933, PB 15" 1.67 Superdrive Mac OS X (10.3.9)

Hi PS1,
I am using Font Agent Pro as a font manager and am wondering if there's a conflict with it and Apple's Font Book.
Yes, in a sense. If you always open and close your fonts through FAP's interface, then it's no problem leaving Font Book on your Mac. It will simply sit there and take up a small amount of disk space.
That said, it's still a nuisance having more than one font manager on your computer at a time. Say you disable all of the fonts in Font Book that you can. Assuming the fonts are still in the /Library/Fonts/ folder, you then turn them on and off with FAP. The problem then is which orders are the applications going to believe? Are the fonts active, according to FAP? Or inactive, according to Font Book?
Also, if you double click on any font to quick activate it, both FAP and Font Book will activate the font. So you will find yourself confused fairly often when you deactivate the font in FAP, but they still keep showing up in your applications as active. That would be because Font Book is still holding it open.
So if FAP is going to be your main font manager, then copy Font Book off to another disk for safe keeping (so you don't have to use Pacifist or an OS install to get it back on your system if you need, or want to), and then remove it from your hard drive.
Definitely don't remove the /System/Library/Fonts/ folder! If you remove Lucida Grande from its default location in any way, you will lose control of your desktop. The only way I can think that Taavi managed to accomplish this was moving files around booted to an external drive, or from another Mac via FireWire Target Mode. It's impossible to do on the same drive your booted to. You'll lose control of the desktop every time if you remove Lucida Grande. Although Taavi may have made his/her copy to the /Library/Fonts/ folder. That at least would still leave an active copy of Lucida Grande somewhere, but I highly recommend against that sort of handling of the system fonts.

Contact information not showing in address book

Migrated from Snow Leopard to Mavericks and the address book shows no contacts. The data appears to have been correctly imported into my user folder > library > application support > address book folder (but the icons show up as "Unix / Terminal" not "blank").
I've run permission repair and daily / weekly / monthly maintenance routines to no avail.
Any suggestions?

After several days of trying, i finally seem to have it working. What i ended up doing was exporting my backing up my addresses on another computer that still had Snow Leopard on it. I exported both as .abbu and vCards. I was then able to get the vCards into iCloud.
Problem was, i could not get them to import into Contacts in Mavericks. I could not even add the iCloud account to contacts. It would let me sign in and choose contacts, but iCloud never showed up in the accounts nor did the contacts show up in Contacts.
After trying repairing permissions and resetting the PRAM to no avail, it occured to me to delete the Address Book folder from /Library/Application Support
Once that folder was gone, i was able to add iCloud to the accounts and import the .abbu file from Address Book.
So if you did not export your Address Book contacts before updating, you will need a second computer that is still running Snow Leopard to export the contacts. Then you can delete the Address Book folder from the Library and you should then be able to import the contacts into Contacts on Mavericks.
Hope this helps.

Calendar not showing in stand-by mode

I got a problem with my calendar planning not showing up in active standby-mode. It's disappeared completely. I have deactivated and re-activated the calendar in my settings to no avail. All other options in active standby is working (even the calendar's todo entries), it's just the calendar planning that won't show up. Has anyone alse had this problem? Have I accidently deactivated the option in some other way? Is there another way to get this back other than settings -> programs in active stand by? Or perhaps the only way is to update the device software? (But somehow I don't think that'll help). Any help is greatly appreciated since I'm a bit lost without seeing my planning on the main screen.

You don't say what phone you are reffering to but try backing up important data such as Contacts, Calendar messages etc an then perfoma a hard reset by following these simple steps.
Turn the phone off
Hold down the green phone, key number 3 and the * key all at once whilst getting someone else to turn the phone back on.
Keep the keys in until the phone plays the startup sound, then restore your data and try again, if all else fails visit a Nokia service point.
iPhone 5 32GB
MacBook Pro Retina 15" Mac OS X Mountain Lion 10.8.4

HT201272 I am trying to recover my aunts audio books for i tunes. We registered her new ipod and authorized her new computer, but in the purchased menu it is not showing the audio books. Any suggestions? Customer service support is not working for me.

Can somebody please help me. I am trying to recover my aunts audio books that she has purchased. I have authorized her new computer and registered her new ipod. There is no option for audio books under purchased and itunes is telling me there are no available downloads. She has purchased several audio books in the last two years.

thank-you! yeah, i cant see going to 64. as it stood sound quality was dodgy. good on some stuff, great on others, and terrible on a few. i have some great news...my ipod is not showing up in itunes. again. i give up. it has music on it. its full to the tippy top. i fooled around with some of the things the trouble shooter wizard thing suggested last night for hours. didnt fix it. after awhile i was just going in circles. i will just live with the thing the way it is. but i will say one thing; after reading some of the posted issues other folks are having i'm just glad i didnt put everything in the cloud....peace

Data selection not showing in Planning book

Hi everybody,
We were using one info cube on APO side and so from cube the data will be shown in the APO planning book..
Now we modifed the cube on APO by adding new infosource and new mappings from BW side with data marts.. I can see the data is successful loaded to cube, but the slection it self is not showing.. i dont see anything related to cube and so i couldnt run the planning book.. My point is data is available in cube bu planning book now have no data...it is not showing any data..
thanks
arya

There might be few things you should probably check
1) In the planning object structure just activate the POB. through the context menu.
2) I think you might have assigned the Infocube into the Planning areas as Infocube Fed key figures. Make sure that all the characteristics remain the same. There might be inconsistency between the char of the new Cube and the already existing PA.
3) Create time series to the PA or perform initialization of the PA.
4) Try creating a CVC manually and see if it allows to create.
Atleast now you should be able to see the key figures in the Planning Area.
Let me know if it works.

Why are line graphics not showing up in Preview Mode when they show in Normal view mode?

I am using CS4, I've used InDesign for 4 years. I can not figure out why this is happening...
From the Tools panel, I am using the line and circle tools. Drawing lines (arrows) and circles on my document, with a stroke weight of 1. The lines are the top item on my page, the last thing I draw. I draw lines that would go over not only other graphics, but over text as well.
Problem is that they only show up in Normal view, not Preview view. Hence, I don't think they will show up on the final document.
I've used these tools often, and the lines not showing is a new problem. Can anyone shed some light on why this might be happening?
Thanks, Louise

I looked and yes "nonprinting" was ticked in the Attributes panel. THANK YOU :-)
I knew there had to be a simple solution and I was so frustrated it was eluding me.
Thanks again.

Fonts not showing in Font Book

I'm trying to install the font 'MuseoSlab-500' however it is giving me a 'name table structure' error as well as a 'duplicate font' error.
I don't see how it can be stating 'duplicate font' when the font is not viewable in Font Book itself? Also, the font isn't viewable in any other applications.
It does appear, however, in my Fonts folder.
Has anyone else had any issues like this?

http://discussions.apple.com/thread.jspa?threadID=1311710&tstart=0

IPhone 4s not showing on Mac Book Pro

Hi all,
I'm using a Mac Book Pro and an iPhone 4s. Both are installed with the latest updates/OS. Although my iPhone is able to charge off my Mac Book, whenever I plug it in, I get a message that says camera not found and am unable to access any of the pics/videos etc from my phone through the computer. It doesn't show up in the computer menu either. Is this normal?!
Thanks in advance,
Niall

I don't know if it's related, but there have been some synching issues with the iPhone after 2.2.1. Try deauthorizing then immediately reauthorizing your MacBook on iTunes. Then try syncing your iPhone.

'Other Address List' not showing in Address Book

I'm trying to create an customized address list that will appear in the address book. I've placed the contacts into a contacts folder, and placed this contacts folder into a .pst file. This way, I can distribute this .pst file for others to use the same
address list.
I'm aware that I have to tick 'Show this folder as an e-mail Address Book', under the properties of the contact folder.
This address book does show up under 'Other Address List' -> name of the address book, when we look at the address book drop down list. This is when I only have 1 email account under the same Outlook profile.
When I have more than 1 email account under the same Outlook profile, this address list shows itself under the 2nd email account, and not 'Other Address List'.
Is this by design or could it be a bug? Is there a way to fix this / any workarounds? Thank you!
FYI I am waiting for verification of my account as I can't post pictures or links. I've already completed verification by clicking the link. Maybe there's a delay somewhere.
Update : images uploaded.

Hi,
I tested this issue and I can reproduce it in my environment. However, as far as I know, this behavior won't affect the usage of the address book.
I searched the internal resource but I cannot find a bug report regarding this issue. If you have any suggestion about this issue, you can submit a feedback via:
http://office.microsoft.com/en-US/suggestions.aspx
Best Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Managed Metadata Fields not showing up in preview mode

0down
votefavorite
In our SharePoint 2013 Publishing page, managed metadata fields doesn't show in preview, they show up only in edit mode or after we publish page.
Is this bug?
Thanks in advance.

Hi,
According to your post, my understanding is that the managed metadata fields not display in preview.
I tried to reproduce the issue, the managed metadata fields worked well in my environment.
I create a publishing page, add a library web part which contained managed metadata columns.
Then click the preview option in the ribbon, the managed metadata columns worked well.
Did the issue occur in other publishing pages? You can create a new publishing page to check whether it works.
Did you use the compatibility mode or add the site into trusted sites?
You can use compatibility mode to check whether it works.
Open IE->Tools->Compatibility View Settings
You can also add the site into Trusted sites.
Open the IE->Internet Options->Security->Sites->add the site into the Websites, then check whether it works.
What's more, you can use other browsers to check whether it works, such as Firefox, Chrome.
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Muse 2014.2.1.10 - place of svg - not showing right in design mode but correct in browser

Hi,
I am trying to place an svg file as a stand alone object and I am not seeing it correctly in design mode at muse. It seems to add a black stripe at the bottom of the svg covering a significant amount of the svg image. When preview at the chrome browser it seems fine and also by using the preview in browser of muse.
Any ideas?

It is weird and kinda frustrating but it appears to be working now (partly). I still can't see the image in Design view but they are now showing up in the browser.
I tested this using the following save settings in Illustrator (both worked this time, but when I tried originally both failed).
Only difference between the two is the Responsive option.

Not showing pics in Book mode

Similar Messages

Maybe you are looking for