Not Showing the Admin tab

Hi All,
I am new to BIP and trying to build report in Publisher by using biserver Subject areas but when i am logging into publisher through web server (Administrator) but it is showing empty shared and my folders and also not showing the Admin tab.
By searching some old threads i found that we have to change the security model in xmlp-server-config i don't know why we have to make this setting but i changed this setting as below but now also it is showing empty folders and not showing Admin tab.
Edit the property SECURITY_MODEL and change it to XDO. i.e. for example <property name=”SECURITY_MODEL” value=”XDO”/>.
Can any one help me how to build report using biserver SA's.
Regards,

Hi ,
Sorry i did't restart the services now all its looking fine.
Thanks,

Similar Messages

Migo is not showing the excise tab - header level and item level

Hi,
i have created one PO with excise and i have created MIGO with only capture excise invoice, in MIGO before saving the document system is showing the excise basic, cess and higher education cess in excise tab, header level as well as item level. After saving the document, if i go to dispaly view of the MIGO document system is not showing the header level as well as item level excise amount. The tab itself is not appearing. Can any one help me on this.

Hi,
There are two kinds of statuses, system status and user status.
You can only influence System status if you execute a business transaction that changes the system status.there
are four system statuses open, In process,Released and Completed.
User status can be created as additional information to the system status in any numbers.But for this you
need to define a status profile which would further be assigned to transaction type(header status) and
item categories(item status).
The header status is independent of the item status. One exception is the status Completed.
If all items have the status Completed, the header status is also set to Completed.
For defining a status profile you need to go to
SPRO>Customer Relationship Management>Transactions>Basic settings>Status Management.
Hope this helps.
Regards
Sidd

Laserjet 4345 mfp won't scan to folder; web interface not showing all admin tabs

Hi,
I have a laserjet 4345 mfp which, until a few days ago, was able to scan documents to a network folder. When I try now it gives me the error "the path cannot be found". Here's what I've tried so far:
- Looked for a way to change the network folder settings or define a new folder. I couldn't find any so I printed the "how to scan to folder" page from the control panel. It tells me to define a new location by clicking the "Other" button on the control panel, but I can't find an Other button, on any screen.
- Accessed the web interface, which only shows up with the "Home" and "Networking" tabs - no "Digital Sending", "Settings", or "Information" tabs, which should be there according to the manual.
- Thinking it might be a permissions issue, I checked and found that the administrator password was not set. I set the admin password via the web interface, and now when I try to access it prompts for the password I defined, but still gives this incomplete interface. I am also able to access and change all the networking settings, so I don't think insufficient permissions are the issue.
- Called HP support, they said the problem is permissions and I should cold reset the machine, which I am quite reluctant to do since not only all settings, but the entire address book as well, would need to be re-entered. This aside from the fact that I really don't think permissions are the issue, as decribed above.
- Verified that I am able to send scans to different email addresses. SMTP gateway test goes through OK. LDAP does not, but this has not prevented scan to folder from working in the past.
I don't know how the scan-to folder was initially set up because I wasn't supporting this client at the time.
Any ideas?
Many thanks in advance.

I have a problem with my scan to folder as well and I have to access the folder from a computer before it will work. I'm not sure why that works, actually. You might want to give that a try to see if it fixes the problem. If it does, I imagine it is some sort of security problem with the folder you are trying to scan to.
Thanks,
Tiffany
I am an HP employee!

Genius Recommendations in the iTunes store does not show the TV tab anymore.

Recently the Genius recommendations in the iTunes store stopped even displaying the "TV" tab. I still see the music and movies tabs (and the recommendations in them). However, there is no tab for TV Shows. About the same time (maybe simultaneously not positive though) I stopped seeing the quick link (upper right hand side of screen) to get to the TV Shows portion of my wish list. For the wish list I can still scroll down to the TV section and click "see more" to get to the full list. However in the Genius recommendations even the "show more" doesn't give me any TV Shows.
Has anybody ever seen this before? I'm at a loss after some quick searching on the web.

Try this,
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
Now launch your iTunes and see if it is working now.

HT4642 I use numbers with excell 2010, but it does not show the drop tabs, just a number, is this fixable?

I have a iphone5 and trying to use numbers with it, I use excell 2010, but it will not transfer the dop down boxes on excell 2010. Is this fixable or what?

Welcome to Apple Support Communities
The first Mac with Thunderbolt was the Early 2011 MacBook Pro. If you have got a 2010 MacBook Pro, you have got Mini DisplayPort instead of Thunderbolt, which are the same, but Mini DisplayPort can't be used to connect external disks.
To check which MacBook Pro you have, open  > About this Mac > More Info, and you will see the MacBook Pro model. If it's Mid 2010 or older, you haven't got Thunderbolt, so you have to connect the external drive through USB

Iview for UWL not show the tab(Taks, Alerts, Notifications, Tracking)

Dear experts.
I am facing the following issue.
In the MSS for the Workset: Work Overview , for UWL the system not show the tab(Taks, Alerts, Notifications, Tracking), ie the system not show none tab, show a page in blank.
My question is: What is the cause of this issue?
Thanks in advance
regards

use the standard role for UWL, ie check if you are using any modified XML for uwl
This happens if you use custom XML and hide the tabs
Enable the support information for UWL and check in UWL administration
check here
https://www.sdn.sap.com/irj/scn/wiki?path=/display/bpx/uwl+faq
http://wiki.sdn.sap.com/wiki/display/TechTSG/%28UWL%29Navigationnodeca
nnotbeselected
If you only have the .tra and .001 files on the system (and the
standard files) then you can proceed as follows:
So what do we need to do to fix this?
This is a known issue with the MSS system and the generated XML f
However, the fix is quite simply achieved...
For both the .001 and .tra xml files you will need to do the foll
1. Download and save your config for both com.sap.pct.erp.mss.001
com.sap.pct.erp.mss.tra:
2. Open the saved version and save the file with a new name.
Access the configuration file within the zip file and proceed to
the following changes:
I would like you to navigate to the following place in your XML f
<! Work Center UWL shows the same
entries as Control Center UWL >
<NavigationNode name="root"
view="" referenceGroup="">
For every navigation node that has a full path assigned I would l
you to delete up to and inclusive of the last full stop that is
listed in the node. Here is an example for you:
a) first node identified is that fits the criterion above is:
<NavigationNode name="com.sap.pct.erp.mss.Alert"
or check here
system admin, system config
UWL and Workflow
UWL adminsitration
Click to Configure Item Types and Customize Views Using a Wizard
Customize the look of the UWL main page
Select the alerts tab
Click the remove tab from current view button
Then click save and return. The tab is now gone from the UWL UI.

IPhoto is not running it seems that its damaged or incomplete is , this shows the little tab

iPhoto is not running it seems that its damaged or incomplete , this shows the little tab.

To back up:
Most Simple Back Up
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex:
Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically. Examples of such apps: Chronosync or DejaVu . But are many others. Search on MacUpdate
As to your main issue: Reinstall iPhoto
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.

TS1277 hello, I am trying to add get my computer authorized for my itunes account, but the store is not showing the "authorize your computer" tab...

hello, I am trying to add get my computer authorized for my itunes account, but the store is not showing the "authorize your computer" tab...

never mind... found it after finding someone else's answer to the same questtion. I liked the Alt S information, that was the greatest help. I was looking in the wrong place. That must be a common occurance.

I have loaded Lion on my MacBook and the new trackpad functions work only on one ordinary account or user and not on the admin account. The trackpad preferences are well set. What can I do?

I have loaded Lion on my MacBook and the new trackpad functions work only on one ordinary account or user and not on the admin account. The trackpad preferences are well set. What can I do?

iCloud should still help you reduce some hard drive space. Just select "optimize" in the icloud tab in Mac Photo App preferences.
Granted, not the same as completely offloading your library to a back-up drive at your location.
Good Luck!

Import option is not showing the Data Source created using ODBC

Hi all,
I'm new to OBIEE, just installed OBIEE 10g in my system with the help of some reply from this Forum (thanks to Kalyan for this).
Now when I tried to create new rpd, the Import option is not showing the Data source I have created. I have created new Datasource in the SystemDSN tab of the ODBC Administrator window,I have tried this by creating the Datasource in the UserDNS tab as well.
Mine is Windows 7 Ultimate. The new data source which I have created through the ODBC Administrator window is to connect to SQL 2008 (I'm trying to get some table from SQL 2008 database), I don't have Oracle data base.
While creating the Data source ODBC Administrator is showing only two drives (SQL Server and SQL Server Native Client 10.0 ) , so I have created the Data source using the SQL Server Native Client 10.0 drive.
Can some one help me to understand the issue and to solve it.
Thanks,
Mithun

By calling your cellular data provider.

I am installing snow leopard on a new drive unformatted but it does not show the disk to install it on.? do i need to format first with one partition?

I have installed a new drive on my mac book and more ram but the snow leopard install asks which to install the system on but then does not show the drive.
do I have to partition it and name it first. -- if so just one partition?

Do this:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
When formatting has completed quit DU and return to the installer. Complete the OS X installation.

It's not showing the play or next song buttons on locks screen when the musics are played

it's not showing the play or next song buttons on locks screen when the musics are played

kaeandcolesmon,
If you open the recovery drive (partition) it should only have a single folder (Recovery).
To make sure that your not saving restore points to that drive.
See:
Start, Control Panel, System, System Protection tab. Make sure the D drive partition is set to OFF so that it does not save there.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Listener not showing the instance for informix.

Hi All,
I am using oracle gateway 11g and here I just discovered that the one of the database listener not showing the instance for the informix gatways, though it has already configured. whereas on other database , the listner is showing the instances for informix database. it was running fine few days back though.
would appriciate , if you coule let me know that why it suddenly stop responding ?
----------------- OK Listener ----------------------------
ptmsap> lsnrctl status LISTENER_PTMSAP
LSNRCTL for Linux: Version 11.2.0.3.0 - Production on 29-JUL-2012 05:07:07
Copyright (c) 1991, 2011, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=TCP)(Host=10.222.68.34)(Port=1621))
STATUS of the LISTENER
Alias                     LISTENER_PTMSAP
Version                   TNSLSNR for Linux: Version 11.2.0.3.0 - Production
Start Date                19-JUL-2012 10:25:25
Uptime                    9 days 18 hr. 41 min. 41 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   /db/ptmsap11/oracle/product/11.2.0/network/admin/listener.ora
Listener Log File         /db/ptmsap11/oracle/diag/tnslsnr/tbx4new/listener_ptmsap/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.222.68.34)(PORT=1621)))
Services Summary...
Service "MSCARD4" has 1 instance(s).
Instance "MSCARD4", status UNKNOWN, has 1 handler(s) for this service...
Service "as400" has 1 instance(s).
Instance "as400", status UNKNOWN, has 1 handler(s) for this service...
Service "db2test" has 1 instance(s).
Instance "db2test", status UNKNOWN, has 1 handler(s) for this service...
Service "ptmsap" has 1 instance(s).
Instance "ptmsap", status UNKNOWN, has 1 handler(s) for this service...
Service "tg4ifmx" has 1 instance(s).
Instance "tg4ifmx", status UNKNOWN, has 1 handler(s) for this service...
Service "tg4trai" has 1 instance(s).
Instance "tg4trai", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
LISTENER_PTMSAP =
(ADDRESS_LIST =
        (ADDRESS =
          (PROTOCOL = TCP)
          (Host = host_ip)
          (Port = 1621)
SID_LIST_LISTENER_PTMSAP =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = ptmsap)
      (ORACLE_HOME = /db/ptmsap11/oracle/product/11.2.0)
      (PRESPAWN_MAX = 10)
   (SID_DESC=
     (SID_NAME=tg4ifmx)
     (ORACLE_HOME=/db/ptmsap11/oracle/product/11.2.0)
     (PROGRAM=dg4ifmx)
   (SID_DESC=
      (SID_NAME=tg4trai)
      (ORACLE_HOME=/db/ptmsap11/oracle/product/11.2.0)
      (PROGRAM=dg4ifmx)
   (SID_DESC=
     (SID_NAME=db2test)
     (ORACLE_HOME=/db/ptmsap11/oracle/product/11.2.0)
     (PROGRAM=dg4db2)
   (SID_DESC=
     (SID_NAME=as400)
     (ORACLE_HOME=/db/ptmsap11/oracle/product/11.2.0)
     (ENV="LD_LIBRARY_PATH=/db/ptmsap11/oracle/product/11.2.0/dg4db2/driver/lib:/db/ptmsap11/oracle/product/11.2.0/lib")
     (PROGRAM=dg4db2)
(SID_DESC=
    (SID_NAME=MSCARD4)
    (ORACLE_HOME=/db/ptmsap11/oracle/product/11.2.0)
    (PROGRAM=dg4odbc)
    (ENVS=LD_LIBRARY_PATH=/opt/minisoft:/db/ptmsap11/oracle/product/11.2.0)
+++++++ Not OK Listener++++++++++++++++++
LISTENER_SMI =
(ADDRESS_LIST =
        (ADDRESS =
          (PROTOCOL = TCP)
          (Host = host_ip)
          (Port = 1821)
SID_LIST_LISTENER_SMI =
(SID_LIST =
     (SID_DESC=
     (SID_NAME=SMICAN)
     (ORACLE_HOME=/pdsdev/ptmqa/oracle/product/11.2.0/db)
     (ENV="LD_LIBRARY_PATH=/pdsdev/ptmqa/oracle/product/11.2.0/db/dg4db2/driver/lib:/pdsdev/ptmqa/oracle/product/11.2.0/db/lib")
     (PROGRAM=dg4db2)
        (SID_DESC=
        (SID_NAME=SMIINTL)
        (ORACLE_HOME=/pdsdev/ptmqa/oracle/product/11.2.0/db)
        (ENV="LD_LIBRARY_PATH=/pdsdev/ptmqa/oracle/product/11.2.0/db/dg4db2/driver/lib:/pdsdev/ptmqa/oracle/product/11.2.0/db/lib")
        (PROGRAM=dg4db2)
        (SID_DESC=
        (SID_NAME=SMIMEL)
        (ORACLE_HOME=/pdsdev/ptmqa/oracle/product/11.2.0/db)
        (ENV="LD_LIBRARY_PATH=/pdsdev/ptmqa/oracle/product/11.2.0/db/dg4db2/driver/lib:/pdsdev/ptmqa/oracle/product/11.2.0/db/lib")
        (PROGRAM=dg4db2)
        (SID_DESC=
        (SID_NAME=SMIMRKTS)
        (ORACLE_HOME=/pdsdev/ptmqa/oracle/product/11.2.0/db)
        (ENV="LD_LIBRARY_PATH=/pdsdev/ptmqa/oracle/product/11.2.0/db/dg4db2/driver/lib:/pdsdev/ptmqa/oracle/product/11.2.0/db/lib")
        (PROGRAM=dg4db2)
LISTENER_PTMQA11 =
(ADDRESS_LIST =
        (ADDRESS =
          (PROTOCOL = TCP)
          (Host = host_ip)
          (Port = 1521)
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = ptmqa11)
      (ORACLE_HOME = /pdsdev/ptmqa/oracle/product/11.2.0/db)
      (PRESPAWN_MAX = 10)
   (SID_DESC=
     (SID_NAME=tg4ifmx)
     (ORACLE_HOME=/pdsdev/ptmqa/oracle/product/11.2.0/db)
     (PROGRAM=dg4ifmx)
   (SID_DESC=
      (SID_NAME=tg4trai)
      (ORACLE_HOME=/pdsdev/ptmqa/oracle/product/11.2.0/db)
      (PROGRAM=dg4ifmx)
   (SID_DESC=
     (SID_NAME=db2test)
     (ORACLE_HOME=/pdsdev/ptmqa/oracle/product/11.2.0/db)
     (PROGRAM=dg4db2)
   (SID_DESC=
     (SID_NAME=as400)
     (ORACLE_HOME=/pdsdev/ptmqa/oracle/product/11.2.0/db)
     (ENV="LD_LIBRARY_PATH=/pdsdev/ptmqa/oracle/product/11.2.0/db/dg4db2/driver/lib:/pdsdev/ptmqa/oracle/product/11.2.0/db/lib)
     (PROGRAM=dg4db2)
(SID_DESC=
    (SID_NAME=MSCARD4)
    (ORACLE_HOME=/pdsdev/ptmqa/oracle/product/11.2.0/db)
    (PROGRAM=dg4odbc)
    (ENVS=LD_LIBRARY_PATH=/opt/minisoft:/pdsdev/ptmqa/oracle/product/11.2.0/db)
)Regards
Edited by: 937853 on Jul 29, 2012 2:10 AM

thanks all, I was able to solve the issue. it was indeed a port no , which caused this issue.

Not show the header on the first page of a section

I am writing a manual that has about 7 chapters. Each chapter is its own section. I have been able to go in and create a header for each of these sections very easily. However, it's not quite clear how to NOT show the header on the first page of the section. For example, one of my sections is called "Personal Finances", so I have that in bold a the top of the page using Header 1. Because I have that, I don't also need "Personal Finances" showing in the top right corner in the header.
How can I make it so that it won't show on the first page of each section?
Thanks!

How can I make it so that it won't show on the first page of each section?
In the "Layout Inspector" under the "Section" tab, check the "First page is different" option while one of that section's pages is active/selected/displayed. Then add or delete the header as may be needed so that first page of section does not display the header and all other pages in the section do display. (I.e., what you specifically have to do here depends on whether or not you are already on the first page of the section when you make the change to the display "switch" and whether you are starting with a blank or non-blank header.)

Not Showing the UI API and DI API reference

Hi Experts,
I have SAPB1 8.81 pl 5. I have also installed the sdk 8.81 pl5 but when i am opening my .Net project in visual studio 2008 the older refence to ui api and di api is showing some warning so i have just remove both the references and try to add new reference to ui api and di api.
My problem is that when i am clicking on add refernce it is not showing the 8.81 versions in the list and if i am taking the reference of 8.8 only then it's again giving the warning symbol as previous .

I am assuming that when you try to add the Reference in VS, that for SAP Business One you are choosing the COM tab. You should see the Component Name as SAP Business One DI API Version 8.81, but the TypeLib Version will still say 8.8 ... this would be the same for the UI API.
Possibly you want to uninstall the SDK, make sure the directories are removed and then re-install.
Eddy

Not Showing the Admin tab

Similar Messages

Maybe you are looking for