Not so friend user interface when i have 3 emails to read
Hi,
i have the iphone 3gs, and os 3.1.2
find the navigation cumbersome when reading emails, i have yahoo, gmail, hotmail and office emails.
each time i wanna switch emails, i have to click back a few times, to go to the main email dashboard, and then click on my email that i need; and then click back all the way to the inbox.
not everyone has just 1 mail box
wonder if there are any 3rd party tools to improve on this?
TIA
There could be a "blended" Inbox mailbox along with a "blended" Drafts, Sent, and Trash mailbox for all accounts as with the Mail.app on a Mac. With the Mail.app on a Mac, you can open the blended Inbox mailbox to reveal the Inbox mailbox for each account. You can select an account's Inbox mailbox to reveal messages received by that account only in the message list, or select the blended Inbox to reveal all messages received by all accounts. The same for Drafts, Sent, and Trash.
Limited screen real estate on the iPhone and with the iPod Touch doesn't lend itself to this very well, but I understand something similar is available with a Blackberry.
Similar Messages
-
I do not see the user interface for the Logic Pro software instruments. I can hear them play through my midi keyboard but cannot see them to adjust the parameters. Please advise.
Couple of things - you can open the interface for any instrument or plug-in by double-clicking its insert slot on the channel strip. You can configure Logic to automatically open the interface for a plug-in when you first instantiate it in the preferences. Go to Logic Pro > Preferences > Display > Mixer, and check the box for "Open plug-in window on insertion".
-
"PHOTOS" option does not appear in my interface. Do have Music, Movies, TV Shows, Apps and Radio. Photo doesn't appear on iPhone or iPod Nano
Are you looking at the tabs on the right-hand side of iTunes when you've connected and selected your device on the left-hand side of iTunes ? i.e. it should be one of the tabs that you use to chose what content to sync to the device : syncing photos
-
I was on the phone last night and my phone randomly turned off. It will not come back on even when I have tried to hold the home button and the power button at the same time, while being plugged into the computer? What do I do?
Plug it into power for at least 15 minutes. If it doesn't automatically come on, try a reset... press the home and sleep (on/off) buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
-
I am having trouble with my iTunes Gift card code. It says I have not entered the code correctly when I have…repeatedly. How can I redeem my iTunes voucher?
If the card was issued in the same country as you and your account are based and the page that you posted from doesn't help, then you will need to try contacting iTunes Support (you will probably need to give them images of the front and back of the card, and possibly its receipt) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes
-
My iphone 4 does not make any sound except when i have call. Any sound notification for example whatsapp or email or playing song i could not hear a pip, but when blug the earphone i could hear all sound via earphone, any advise??
Check the Mute switch, which is on the left side of the phone above the volume buttons.
-
My Icloud is tuck on my old email adress. i can not retreive the password becaue when i request the email it doent get sent to thi adress. how can i change it sothat my icloud is on my new email. i cant login or out of icloud now.
To change the iCloud ID on your phone you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone, then sign back in with the ID you wish to use. If you don't know the password for your old ID, or if it isn't accepted, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Tap edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.
-
I do not want BCC names listed when I send an email
I do not want BCC names listed when I send an email.
Bcc: means BLIND Carbon Copy. These Addressees will receive a copy of the email, but other recipients will not see their names.
Try sending the email to your own Address to see exactly what it will look like.
If it is not satisfactory, you may have to BBC to a LIST. -
How do your get the red flashing light to occur in the left corner of the iPhone 4S so I know when I have a email,txt or message left?
If you want to be reminded on unread mails or messages, you can set the alert to repeat. There's no flashing red light. http://iphone-and-i.blogspot.com/2012/01/how-to-customize-notification-center-in .html
-
In my email mailbox, I can see a two line preview, but when I select the email to read it in detail, the body of the email is a blank screen. Any suggestions?
I'm having the same issue, and as far as I can tell, it's been happening since I downloaded the update that fixed battery issues, etc. I'm on hold with customer support, and will update here once done.
-
Not able to fix error when I have Site Collection Admin
Hi,
I try to create a SharePoint 2013 workflow and combining with Info Path 2013. I have site collection admin but it still said that I cannot log into the list or the list cannot be accessed or it cannot find it. Can you please tell me what the error is? Why
access is denied when I have the highest permission to every thing. On the form, there is a field that looks up from the other list.
The following query failed: DLESPList (User: 0#.w|ins\annal, Form Name: DemandLetter, IP: , Connection Target:
http://ins01/sites/applications/dcl/DLESPList.udcx, Request:
http://ins01/_layouts/15/FormServer.aspx?XsnLocation=/sites/applications/FormServerTemplates/DemandLetter.xsn&ClientInstalled=true&DefaultItemOpen=1&Source=http://ins01/sites/applications/FormServerTemplates/Forms/All%2520Forms.aspx&AjaxDelta=1&isStartPlt1=1394749153809,
Form ID: urn:schemas-microsoft-com:office:infopath:DemandLetter:-myXSD-2013-12-05T17-53-56 Type: DataAdapterException, Exception Message: The form cannot run the specified query. The list could not be found. Access is denied. (Exception from HRESULT: 0x80070005
(E_ACCESSDENIED)))
The following query failed: NOD Not Required Reasons (User: 0#.w|ins\annal, Form Name: DemandLetter, IP: , Connection Target: dcl/NOD Not Required Reasons.udcx, Request:
http://ins01/_layouts/15/FormServer.aspx?XsnLocation=/sites/applications/FormServerTemplates/DemandLetter.xsn&ClientInstalled=true&DefaultItemOpen=1&Source=http://ins01/sites/applications/FormServerTemplates/Forms/All%2520Forms.aspx&AjaxDelta=1&isStartPlt1=1394749153809,
Form ID: urn:schemas-microsoft-com:office:infopath:DemandLetter:-myXSD-2013-12-05T17-53-56 Type: DataAdapterException, Exception Message: A data source that is required to populate some form data cannot be found. Form elements, such as drop-down lists, may
be blank.)
Thank you and I look forward to hearing from any developer soon.
AnnieLifsoni think your issue with infopath form, I think connection string you are using is not working thats why you getting the access denied.
check event log if you find any error there?
did you try to browse the site directly in browser, are you able to get the site?
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog -
I have FF set to check for but do not install updates. When I start yahoo email, FF automatically instals updates. I am only user/administartor. How do I make this stop? It is messing up other programs - destroyed my Norton security.
Usually, the "notify" setting works fine. I don't know whether having Yahoo as the home page makes a difference. ??
Updates are available for your Norton add-ons. Please see this article: [http://community.norton.com/t5/Norton-Toolbar-Norton-Identity/Firefox-15-Support-for-Norton-Toolbar/td-p/791174 Firefox 15 Support for Norton Toolbar - Norton Community].
(Firefox probably can't find those automatically because the updates arrive through Norton LiveUpdate instead of the Mozilla add-ons site.) -
Itunes is not authenticating my User Name when I try to remove Parental Control
Why is iTunes store unable to "Authenticate" my User Name when I try to unlock the Parental Control? This started after I downloaded the latest version 10.5
See Here > http://support.apple.com/kb/HT1808
This will not necessarily work if the Device has been Modified. -
I'd like to know if when developing an user interface over TS using MFC, if a sequence error occurs, I get an error on the user interface and the sequence stops without giving any other option. Is possible to continue the sequence, and show as failed the sequence that caused the error?
Danihello Daniel -
If you are talking about the behavior of the simple operator interface example for MFC, then the reason why the error immediately causes a 'skip to clean-up' is because it is set explicitly in the code for the error case. To fully handle the error (as the sequence editor would), you would want to modify the case where the error is detected and perhaps tap into the TestStand API for Engine.DisplayRunTimeErrorDialog( ). If you are able to view the C code written for the full version of the CVI operator interface, you may want to use that as an example of how to completely handle every error.
An alternative is always to handle errors yourself. If you are interested in knowing strategies for such customizations I recommend you look into the shipping examp
les and downloadable programs for sequences leveraging the PostStepRunTimeError callback.
Regards,
Elaine R.
National Instruments
http://www.ni.com/ask -
maybe you can help....I can receive mail fine, but when I open or delete emails from my iphone or computer, it will not sync with each other....so I have 600 emails on my iphone and 100 on my computer..I have looked at everything I can think of
I don't know about the systems, but is your phone on wireless and your other device on wireless? Then I think they would mutually update.
Howerver the previous response from ckuan sounds much more informed so I would check that out.
Maybe you are looking for
-
How to create a new track with existing changes in the production
Hi I need to create a new track for the ESS package with the existing changes that we already made to the ESS package. We already have a development track and the customisation to the ESS package has been already done in that track. Now my requiremen
-
Hi, We need a list of users that visits a certain page on a SharePoint site on a daily, weekly and monthly basis. Now the question is, is that possible out of the box or through the custom web development. Thanks RRS
-
How does two ERP systems of two different release communicate each other?
Dear Experts, i have a query regarding the communication method between two ERP Systems of different releases. for example ECC6.0 and ECC4.7, how do i do the integration to make the communication happen? Regards, Binod Sahu
-
How to Have photoshop CS5 shortcuts in one FILE in start menu
Hello everybody I would like to have in one FOLDER all Photoshop CS5 shortcuts in Start menu, I mean force photoshop setup.exe to do it (not do it manually). I heve been searching for a solution for a long time and never found something usefull. If a
-
Reg. PR Number range display vary
Dear all We want to change our PR number range,For that I went to OMH7 there I created one new number range. But It did not change.If I create PR showing one number which is differ from the current showing at OMH7.Both are not same.How to correct it.