NOT SOLVED - Border printing problem

Disregard the thread that claims this is fixed -- it is NOT.
Same problem with a brand spanking new Office Jet 6500. This is NOT a problem with Word. This is NOT an application problem. This is an HP problem because it is their driver that tells the application the size of the paper and the margins. The application sends all the data to the printer and the PRINTER is not rasterizing it correctly. I NEVER HAD THIS PROBLEM WITH MY OLD LEXMARK OR WITH A NEW CANON.
My daughter had points taken off for an "incomplete sentence" when in fact her sentence was perfectly fine. I had to explain to the teacher that our HP printer has a bug and that we will try to not let this happen again.
HP PLEASE FIX THIS PROBLEM SO OTHER CHILDREN DON'T GET PENALIZED IN SCHOOL FOR Y-O-U-R MISTAKES!!!!!!!!!
Don't pawn this off on the application because it is YOUR application.
My wife prints accounting reports for fund raisers and children's account are being left off. This is UNACCEPTABLE because this is a LEGAL hardcopy of an accounting record and your printers are the ONLY ONES WITH THIS PROBLEM!!!!!!!!!
If you can't tell, I'm a bit ticked off once I found out that this can affect my child's grade in school.  

Bump this message.
Clipped output on various printer (e.g., Officejet 6500) is a major flaw with HP drivers.
It baffles the mind to think that HP won't fix this problem. I have twice been told that I would be contacted by a supervisor within 48hr or 24hr and both times never received any contact.
Workarounds are NOT solutions because it requires the average person to spend countless hours looking for a solution or printing and re-printing documents. It looks like the workaround is simply a way to waste ink so you can buy more from HP.
FWIW, I am a software developer and actually write code to generate precision prints/plots and recent HP products routinely clip the bottom of the page.

Similar Messages

  • HP Deskjet Ink Advantage 2060 All-in-One Printer Bottom Border Printing problem

    i have some problem...can anyone help me to solve this..when i want to print full border page (actually my paper size A4) bottom border didnt print out. i had some changes setting but it not solve the problem...anyone can help me??? pleaseee!!!

    Hi @fatin7899 
    Did you choose A4 in the paper size selection in the program you are printing from?  What program are you using to print from, and have you maybe tried a different program?
    Are you able to print this project onto a different size page successfully?
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • AirPort Extreme Update 2007-004 did not solve my reliability problems.

    The latest update from Apple did not fix the problem on my system, and now I don´t know what I should do, is there anything I can do to somehow fix it?
    I can´t use the computer like this, it´s very annoying, for example I can´t browse the web with Safari(constant "Failed to open page" or "You´re not connected to the internet" messages), ethernet is not an option, besides, what´s the point of a laptop if I cannot connect to the network wirelessly?
    This is my first MacBook by the way, I like its look & feel, easy of use and integration, but this AirPort issue completely took away the "just works" image I had of Apple´s products.
    Don´t get me wrong though, I knew the Mac was not going to be perfect, and that there would be problems(as usual), but I would never have expected something like this.
    I´d really like to get this thing to work, the Mac pretty much offers the kind of integration that I´ve always wanted in Linux.
    Anyway.. am I the only one whose system is still having problems with AirPort?
    What can I do to fix this?
    Should I just wait until Apple releases another bug fix for this? how long would this take?
    Should I return this MacBook to an Apple store?
    I bought this in the U.S. and there is no store on my country(Uruguay), there´re however some Apple Authorized Service Providers, should I take it to them? would they give me a brand new Mac or repair this one for free if I´m covered by the warranty?
    I read(http://www.apple.com/support/contact/) that since I´m still within the 90 days of ownership I can call Apple Technical support, but since they don´t have a number for my country, is there an alternative way of contacting them?(via email?).
    I don´t know.. what do you people think I shoud do?
    +Please don´t recommend me to install an older version, I really don´t want to, besides how do I know it will fix the issue?+
    About the problem:
    Symptoms:
    AirPort signal level randomly decreases until connection is lost, and there is no automatic reconnection.
    Manual reconnection is required and might not always succeed, and even if it does, it doesn´t last long(usually less than 3 minutes).
    Sometimes the network is missing from the menu(when clicking the wifi icon on status bar) and turning off and on AirPort is required.
    Judging from what I´ve read here and found on google, this is a known common problem that dates back to at least april 2007(see [1]).
    *Some (useful?) Information:*
    0) It might have worked better before updating (10.4.9 is the version of my Installation discs, I didn´t reinstall) to 10.4.10, but I can´t say for sure.
    1) According to [1] this seems to be a software problem in OS X, since the atheros driver works fine under Windows.
    2) It doesn´t matter if the laptop is running from battery or not, and it doesn´t seem to be related to waking from sleep state since it happens on a clean restart too.
    3) Once in a while, the OS asks me to enter the WPA passphrase again to connect to the network, why does it do this if the passphrase is already stored inside the default login keychain?. (entering the passphrase again does not fix the problem)
    4) Wireless router is a speedtouch modem, it´s properly configured and it´s known to work, its leds indicate that everything is ok.
    5) The MacBook is approx. 6m away from the speedtouch router(walls in between), electronic devices: headless computer next to the speedtouch modem, printer, radio, tv (note: not that it matters since the laptop has worked from this location before).
    6) System Info: (forums display issues, does not show ok)
    Hardware:
    +Mac OS X 10.4.10+
    +Model Identifier: MacBook2,1+
    +Processor Name: Intel Core 2 Duo+
    +Processor Speed: 2 GHz+
    +Number Of Processors: 1+
    +Total Number Of Cores: 2+
    +L2 Cache (per processor): 4 MB+
    +Memory: 1 GB+
    +Bus Speed: 667 MHz+
    +Boot ROM Version: MB21.00A5.B06+
    +SMC Version: 1.17f0+
    +Serial Number: W87190VFYA2+
    +Sudden Motion Sensor:+
    +State: Enabled+
    Network:
    AirPort:
    +Type: AirPort+
    +Hardware: AirPort+
    +BSD Device Name: en1+
    +IPv4 Addresses: 192.168.1.68+
    IPv4:
    +Addresses: 192.168.1.68+
    +Configuration Method: DHCP+
    +Interface Name: en1+
    +Router: 192.168.1.254+
    +Subnet Masks: 255.255.255.0+
    DNS:
    +Domain Name: lan+
    +Server Addresses: 192.168.1.254+
    +DHCP Server Responses:+
    +Domain Name: lan+
    +Domain Name Servers: 192.168.1.254+
    +Lease Duration (seconds): 0+
    +DHCP Message Type: 0x05+
    +Routers: 192.168.1.254+
    +Server Identifier: 192.168.1.254+
    +Subnet Mask: 255.255.255.0+
    Proxies:
    +Proxy Configuration Method: Manual+
    +ExcludeSimpleHostnames: 0+
    +FTP Passive Mode: Yes+
    +Auto Discovery Enabled: No+
    Ethernet:
    +MAC Address: 00:1b:63:08:c0:87+
    +Media Options: +
    +Media Subtype: autoselect+
    +AirPort Card Information:+
    +Wireless Card Type: AirPort Extreme (0x168C, 0x87)+
    +Wireless Card Locale: USA+
    +Wireless Card Firmware Version: 1.1.9.3+
    +Current Wireless Network: SpeedTouch824916+
    +Wireless Channel: 1+
    7) logs (not good debug info, but maybe it helps...)
    Before last update (from /var/log/system.log)
    +Aug 1 01:36:21 Federico-Zagarzaz-s-Computer mDNSResponder: Repeated transitions for interface lo0 (127.0.0.1);+
    +delaying packets by 5 seconds+
    +Aug 1 01:39:14 Federico-Zagarzaz-s-Computer ntpd[158]: sendto(17.254.0.26): Can't assign requested address+
    +Aug 1 01:39:31 Federico-Zagarzaz-s-Computer /System/Library/PrivateFrameworks/Apple80211.framework/Resources/ai+
    +rport: Error: WirelessAssociate2() = 88001006 for network SpeedTouch824916. The operation timed out.+
    +Aug 1 01:39:39 Federico-Zagarzaz-s-Computer /System/Library/PrivateFrameworks/Apple80211.framework/Resources/ai+
    +rport: Error: WirelessAssociate2() = 88001006 for network SpeedTouch824916. The operation timed out.+
    +Aug 1 01:39:39 Federico-Zagarzaz-s-Computer /System/Library/PrivateFrameworks/Apple80211.framework/Resources/ai+
    +rport: Error: WirelessAssociate2() = 88001003 for network SpeedTouch824916. errWirelessKernelError.+
    +Aug 1 01:39:39 Federico-Zagarzaz-s-Computer /System/Library/PrivateFrameworks/Apple80211.framework/Resources/ai+
    +rport: Error: WirelessCreateScanResults() = 8800100b+
    +Aug 1 01:39:50 Federico-Zagarzaz-s-Computer configd[35]: Error: Failed to join most recent network "SpeedTouch8+
    +24916", err=88001006 (will search for any others)+
    +Aug 1 01:39:50 Federico-Zagarzaz-s-Computer /System/Library/PrivateFrameworks/Apple80211.framework/Resources/ai+
    +rport: Currently connected to network SpeedTouch824916+
    After last update:
    +Aug 1 07:01:37 Federico-Zagarzaz-s-Computer configd[60]: Error: Failed to join most recent network "SpeedTouch824916", err=88001006 (will search for any others)+
    +Aug 1 07:01:48 Federico-Zagarzaz-s-Computer /System/Library/PrivateFrameworks/Apple80211.framework/Resources/airport: Could not find "SpeedTouch824916" on any channel (directed scan)+
    +Aug 1 07:01:48 Federico-Zagarzaz-s-Computer /System/Library/PrivateFrameworks/Apple80211.framework/Resources/airport: Could not find "SpeedTouch824916" on channel(s) 1+
    +Aug 1 07:02:20 Federico-Zagarzaz-s-Computer /System/Library/PrivateFrameworks/Apple80211.framework/Versions/A/Resources/air port: Error: WirelessAssociate2() = 88001006 for network SpeedTouch824916. The operation timed out.+
    +Aug 1 07:02:29 Federico-Zagarzaz-s-Computer /System/Library/PrivateFrameworks/Apple80211.framework/Versions/A/Resources/air port: Error: WirelessAssociate2() = 88001006 for network SpeedTouch824916. The operation timed out.+
    +Aug 1 07:02:38 Federico-Zagarzaz-s-Computer /System/Library/PrivateFrameworks/Apple80211.framework/Versions/A/Resources/air port: Error: WirelessAssociate2() = 88001006 for network SpeedTouch824916. The operation timed out.+
    8) Settings: (forums display issues, does not show ok)
    +unknown-00-1b-63-08-c0-87:~ fede$ cat /Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist+
    +<?xml version="1.0" encoding="UTF-8"?>+
    +<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">+
    .+<plist version="1.0">+
    .<dict>
    . <key>AllowEnable</key>
    . <integer>1</integer>
    . +<key>Always remember new networks</key>+
    . <integer>1</integer>
    . +<key>Default 802.1X Configurations</key>+
    . <array>
    . <dict>
    . <key>AcceptEAPTypes</key>
    . <array>
    . <integer>25</integer>
    . <integer>21</integer>
    . <integer>43</integer>
    . </array>
    . <key>Description</key>
    . <string>Automatic</string>
    . <key>EAPFASTProvisionPAC</key>
    . <integer>1</integer>
    . <key>EAPFASTUsePAC</key>
    . <integer>1</integer>
    . <key>TLSVerifyServerCertificate</key>
    . <integer>1</integer>
    . <key>TTLSInnerAuthentication</key>
    . <string>MSCHAPv2</string>
    . </dict>
    . <dict>
    . <key>AcceptEAPTypes</key>
    . <array>
    . <integer>21</integer>
    . </array>
    . <key>Description</key>
    . +<string>TTLS - PAP</string>+
    . <key>TLSVerifyServerCertificate</key>
    . <integer>1</integer>
    . <key>TTLSInnerAuthentication</key>
    . <string>PAP</string>
    . </dict>
    . </array>
    . +<key>Disconnect on logout</key>+
    . <integer>0</integer>
    . +<key>Fallback Preference</key>+
    . <integer>0</integer>
    . <key>InterferenceRobustness</key>
    . <integer>0</integer>
    . <key>JoinMode</key>
    . <integer>0</integer>
    . +<key>List of known networks</key>+
    . <array>
    . <dict>
    . <key>AuthPasswordEncryption</key>
    . <string>SystemKeychain</string>
    . <key>SCAN_CHANNELS</key>
    . <array>
    . <integer>1</integer>
    . </array>
    . <key>SSID</key>
    . <data>
    . U3BlZWRUb3VjaDgyNDkxNg==
    . </data>
    . <key>SecurityType</key>
    . +<string>WPA Personal</string>+
    . <key>WEPKeyLen</key>
    . <integer>32</integer>
    . <key>_timeStamp</key>
    . <date>2007-07-02T07:49:11Z</date>
    . <key>authMode</key>
    . <integer>2</integer>
    . <key>capability</key>
    . <integer>16</integer>
    . <key>channel</key>
    . <integer>1</integer>
    . <key>cipherMode</key>
    . <integer>2</integer>
    . <key>isIBSS</key>
    . <integer>0</integer>
    . <key>isWPA</key>
    . <integer>1</integer>
    . <key>multiCipher</key>
    . <integer>3</integer>
    . <key>name</key>
    . <string>SpeedTouch824916</string>
    . <key>scanWasDirected</key>
    . <true/>
    . </dict>
    . </array>
    . +<key>Require Admin for IBSS creation</key>+
    . <integer>0</integer>
    . +<key>Require Admin for network change</key>+
    . <integer>0</integer>
    . <key>Version</key>
    . <integer>5</integer>
    .</dict>
    .</plist>
    9)
    .+unknown-00-1b-63-08-c0-87:~ fede$ /System/Library/PrivateFrameworks/Apple80211.framework/Versions/A/Resources/air port -I+
    . +commQuality: 0+
    . +rawQuality: 10+
    . +avgSignalLevel: -89+
    . +avgNoiseLevel: -96+
    . +linkStatus: ESS+
    . +portType: Client+
    . +lastTxRate: 2+
    . +maxRate: 54+
    .+lastAssocStatus: 1+
    . +BSSID: 00:14:7f:30:56:75+
    . +SSID: SpeedTouch824916+
    . +Security: WPA PSK cipher: TKIP+
    10) Software Update.log
    +2007-07-02 01:17:51 -0300: Installed "Pages Update" (2.0.2)+
    +2007-07-02 01:17:54 -0300: Installed "Keynote Update" (3.0.2)+
    +2007-07-02 01:18:04 -0300: Installed "iPhoto Update" (6.0.6)+
    +2007-07-02 01:18:24 -0300: Installed "QuickTime" (7.1.6)+
    +2007-07-02 09:57:07 -0300: Installed "iTunes" (7.3)+
    +2007-07-02 09:57:09 -0300: Installed "Security Update 2007-006 (Universal)" (1.0)+
    +2007-07-02 09:59:26 -0300: Installed "Mac OS X Update (Intel)" (10.4.10)+
    +2007-07-26 21:56:29 -0300: Installed "QuickTime" (7.2)+
    +2007-07-26 22:21:30 -0300: Installed "iTunes" (7.3.1)+
    +2007-07-26 22:21:34 -0300: Installed "Audio Update 2007-001" (1.0)+
    +2007-08-01 02:53:00 -0300: Installed "AirPort Extreme Update 2007-004" (1.0)+
    Don´t know if it helps or not, but that is all I could find.
    Thank you for taking the time to read this.
    Best Regards,
    Federico
    References:
    [1] http://www.macfixitforums.com/showflat.php?Cat=&Board=wireless&Number=823491&For um=&Words=&Match=Entire%20Phrase&Searchpage=0&Limit=25&Old=1day&Main=810572&Sear ch=true
    [2] http://www.appletell.com/apple/comment/unconfirmed-airport-issues-with-mac-os-x- 10410/
    [3] http://discussions.apple.com/thread.jspa?threadID=1008143&tstart=0
    [4] http://www.macfixitforums.com/showflat.php?Cat=&Board=wireless&Number=823491&For um=&Words=&Match=Entire%20Phrase&Searchpage=0&Limit=25&Old=1day&Main=810572&Sear ch=true
    Message was edited by: fzagarzazu (forums display issues)

    Hi,
    Well I don´t know what to think now.. I installed the last security update, restarted, went to sleep and now it seems to be working much better, at least there doesn´t seem to be so many drop outs.
    I find it a little strange that the airport icon on the status bar that shows signal strength keeps changing, but maybe this is normal behaviour?, don´t know..
    I can´t say that the problem is fixed either since I didn´t start to experience airport issues immediately after I updated to 10.4.10, so who knows?
    Maybe it works for two days in a row and then it suddenly starts malfunctioning for no apparent reason.
    It could be very well be a combination of little problems here and there(some even caused by me editing system preferences) that add up and manifest as a bigger problem, I´ve no idea how to trace it, and as long as it works, I don´t care..
    I doubt this will help anyone, but anyway.. the last thing I remember doing before restarting was executing:
    # System/Library/PrivateFrameworks/Apple80211.framework/Versions/A/Resources/airp ort --updateprefs
    which examines network preferences and repairs them if necessary.
    Then I went into System Preferences > Network, AirPort´s options and restored default settings, after that I configured it to require administrator password to "Create Computer-to-Computer networks".
    I´m hoping that the whole airport issue not working after the last airport update was a weird glitch or even better, caused by me.
    If it starts malfunctioning again, I´ll simply call AppleCare and let them deal with it, by the way, it kind of ***** that the only way of contacting them is via phone and no phone number is listed for my country.. no email address? ...
    Best Regards,
    Federico

  • Any Mac expert who can solve my Printing problem? PLEASE HELP!!!!

    So I am asking this again... I have a Samsung 4200 SCX Series printer. It was able to print everything properly till the 14th of April when I installed the latest Security update and the thing stopped working after that (When I give a print command, it just Pauses.... Then when I resume it again, it doesn't respond, just stays there) ... I also noticed that the name of my Mac changed to XXX (3) from XXX (2) after that update, so I am thinking it's the culprit here.. I dunno if it's related, but I just thought I put it forward.
    I also went to Printer and Fax settings in my System Preferences and reseted my Printer and changed the LOCATION name to the new name but no solution... I tried even installing the drivers manually, but the thing just PAUSES!!!!
    And before doubting my printer, I also have Windows installed via bootcamp and the printer works fine with it, it's only the Mac creating an issue.
    I got some response of people asking for the log file about it, so I am posting the last 10-20 line...
    ------->
    E [01/May/2010:10:18:36 +0530] CUPS-Add-Modify-Printer: Unauthorized
    I [01/May/2010:10:18:36 +0530] Setting SamsungSCX_4200Series device-uri to "usb://Samsung/SCX-4200%20Series?serial=8T67BAIP221002W." (was "file:/dev/null".)
    I [01/May/2010:10:18:36 +0530] Setting SamsungSCX_4200Series printer-is-accepting-jobs to 1 (was 0.)
    I [01/May/2010:10:18:36 +0530] Setting SamsungSCX_4200Series printer-state to 3 (was 5.)
    I [01/May/2010:10:18:36 +0530] Saving printers.conf...
    I [01/May/2010:10:18:36 +0530] New printer "SamsungSCX_4200Series" added by "AUTHREF".
    I [01/May/2010:10:18:36 +0530] Setting SamsungSCX_4200Series printer-is-shared to 1 (was 1.)
    I [01/May/2010:10:18:36 +0530] Saving printers.conf...
    I [01/May/2010:10:18:36 +0530] Printer "SamsungSCX_4200Series" modified by "AUTHREF".
    I [01/May/2010:10:19:09 +0530] [Job ???] Request file type is application/pdf.
    I [01/May/2010:10:19:09 +0530] [Job 1] Adding start banner page "none".
    I [01/May/2010:10:19:09 +0530] [Job 1] Adding end banner page "none".
    I [01/May/2010:10:19:09 +0530] [Job 1] File of type application/pdf queued by "chintanvora".
    I [01/May/2010:10:19:09 +0530] [Job 1] Queued on "SamsungSCX_4200Series" by "chintanvora".
    I [01/May/2010:10:19:09 +0530] [Job 1] Started filter /usr/libexec/cups/filter/cgpdftoraster (PID 452)
    I [01/May/2010:10:19:09 +0530] [Job 1] Started filter /usr/libexec/cups/filter/rastertoqpdl (PID 453)
    I [01/May/2010:10:19:09 +0530] [Job 1] Started backend /usr/libexec/cups/backend/usb (PID 454)
    E [01/May/2010:10:19:09 +0530] PID 454 (/usr/libexec/cups/backend/usb) crashed on signal 10!
    I [01/May/2010:10:19:09 +0530] Hint: Try setting the LogLevel to "debug" to find out more.
    I [01/May/2010:10:19:10 +0530] [Job 1] Backend returned status -10 (crashed)
    I [01/May/2010:10:19:10 +0530] Saving printers.conf...
    *E [01/May/2010:10:21:41 +0530] Resume-Printer: Unauthorized*
    I [01/May/2010:10:21:41 +0530] Saving printers.conf...
    I [01/May/2010:10:21:41 +0530] Printer "SamsungSCX_4200Series" started by "chintanvora".
    Oh and it's connected via USB, not the network...
    It still baffles me cause I have searched and the only people getting this issue are the one's who use a printer via bonjour or online.. I AM USING A FREAKING USB AND IT's NOT PRINTING!!!!
    PLEASE HELP if you can... I can't replace my printer or re-install the OS just for this crap...
    MacBook Air running on Mac OS X 10.5.8

    Hey Rodney, the name changed after I installed the latest security patch... And it's not only me, it's a common problem.. Here check it out...
    http://discussions.apple.com/thread.jspa?threadID=2319594&tstart=0
    I wish I never installed that security update...
    And what exactly does this deleting System pref files does??? What does setting up network again imply... You mean just adding the password and selecting the net name of my wifi don't you?? Cause I would hate to reset all those MAC address and other stuff (I really don't have much knowledge about those so wouldn't like to tamper with those).
    Anyways, thanks.

  • [Solved] hp printer problem

    Hi, I searched and found this https://bbs.archlinux.org/viewtopic.php?id=132136 I followed it but the hplip install failed that they said to get from AUR, the only one there was out of date. I wasn't able to get it to build it failed with the following message. Also I am directly connected via usb.
    prnt/hpps/hppsfilter.c: In function ‘require_bod’:
    prnt/hpps/hppsfilter.c:119:5: error: unknown type name ‘ppd_attr_t’
    prnt/hpps/hppsfilter.c:120:5: error: unknown type name ‘ppd_file_t’
    prnt/hpps/hppsfilter.c:121:10: warning: assignment makes pointer from integer without a cast [enabled by default]
    prnt/hpps/hppsfilter.c:127:17: warning: assignment makes pointer from integer without a cast [enabled by default]
    prnt/hpps/hppsfilter.c:128:24: error: request for member ‘value’ in something not a structure or union
    prnt/hpps/hppsfilter.c:129:32: error: request for member ‘value’ in something not a structure or union
    make: *** [hppsfilter.o] Error 1
    ==> ERROR: A failure occurred in build().
    Aborting...
    This is a fresh install OpenBox I installed all the required prereqs from pacman, this would have been the last piece, and wasn't in pacman but the forum post said to get it from AUR, and it worked for the poster, so I followed it. When I run the 'ptal-init setup' it gets to the part where it looks for my usb hp7680 printer and fails thus:
    Probing "/dev/usb/lp1"...
    *** Found "Officejet Pro L7600" but failed to communicate with it!
    *** Elapsed time for this attempt was 6 second(s).
    *** Check syslog file for ptal-mlcd error messages.
    *** See hpoj documentation for troubleshooting information.
    I can boot over to another OS print no problem, this is the first time I have attempted to get printing up on Arch. But Debian, Ubuntu,Sabayon, fedora all print to this machine.
    Any insight or direction would be greatly appreciated.
    thanks
    --jerry
    Last edited by jk121960 (2012-01-09 01:08:11)

    OK I installed the hplip from the repo and still exact same result, when I run the ptal-init setup it fails as follows:
    Probing "/dev/usb/lp2"...
    *** Found "Officejet Pro L7600" but failed to communicate with it!
    *** Elapsed time for this attempt was 6 second(s).
    *** Check syslog file for ptal-mlcd error messages.
    *** See hpoj documentation for troubleshooting information.
    Probing "%001%001"...
    No device found.
    Probing "%001%002"...
    No device found.
    Probing "%002%001"...
    No device found.
    Probing "%002%002"...
    No device found.
    Probing "%003%001"...
    No device found.
    Probing "%004%001"...
    No device found.
    Probing "%004%002"...
    No device found.
    Probing "%005%001"...
    No device found.
    Probing "%005%002"...
    No device found.
    Probing "%005%003"...
    No device found.
    Probing "%005%004"...
    No device found.
    Probing "%005%005"...
    No device found.
    Probing "%006%001"...
    No device found.
    Probing "%007%001"...
    No device found.
    Probing "%008%001"...
    No device found.
    Press <Enter> alone to continue, or if you would like to add a
    JetDirect-connected device, then enter its dotted-decimal
    IP address or hostname here --->
    Done updating device configuration files stored under /etc/ptal.
    If you make manual changes to those files, then be sure to run
    "/usr/sbin/ptal-init start" so they will take effect.
    Starting the HP OfficeJet Linux driver.
    No hpoj devices have been configured.
    As root, run "/usr/sbin/ptal-init setup".
    Onething also it asks me to disable a kernel module and I opted not to do that, would you advise to try it?
    *** Warning: Your system appears to be running in SMP (multi-processor)
    *** mode. The kernel USB printer-class driver appears to be loaded
    *** as a module and/or enabled to be auto-loaded. Use of the kernel USB
    *** printer-class driver instead of libusb on SMP systems may result in
    *** system instability or crashes with some kernel versions.
    *** Would you like the kernel USB printer-class driver to be
    *** disabled and unloaded now for the USB probe ([y]/n)? n
    Here are errors from the errors log and the same was in the messages log.
    Dec 21 13:19:39 zenlinux ptal-mlcd: ERROR at ExMgr.cpp:3165, dev=<mlc:usb:probe@/dev/usb/lp2>, pid=4109, e=110, t=1324495179
    llioSubprocess: llioWrite returns -110, expected=6!
    Dec 21 13:19:39 zenlinux ptal-mlcd: ERROR at ExMgr.cpp:2820, dev=<mlc:usb:probe@/dev/usb/lp2>, pid=4106, e=22, t=1324495179
    llioService: fdRead returns 0, expected=6!
    Dec 21 13:19:39 zenlinux ptal-mlcd: ERROR at ExMgr.cpp:871, dev=<mlc:usb:probe@/dev/usb/lp2>, pid=4106, e=22, t=1324495179
    exClose(reason=0x0010)
    Dec 21 13:19:39 zenlinux ptal-mlcd: ERROR at ExMgr.cpp:2525, dev=<mlc:usb:probe>, pid=4118, e=11, t=1324495179
    Couldn't find device!
    Dec 21 13:19:39 zenlinux ptal-mlcd: ERROR at ExMgr.cpp:2525, dev=<mlc:usb:probe>, pid=4127, e=11, t=1324495179
    Couldn't find device!
    Dec 21 13:19:39 zenlinux ptal-mlcd: ERROR at ExMgr.cpp:2525, dev=<mlc:usb:probe>, pid=4136, e=11, t=1324495179
    Couldn't find device!
    Dec 21 13:19:39 zenlinux ptal-mlcd: ERROR at ExMgr.cpp:2525, dev=<mlc:usb:probe>, pid=4145, e=16, t=1324495179
    Couldn't find device!
    Dec 21 13:19:39 zenlinux ptal-mlcd: ERROR at ExMgr.cpp:2525, dev=<mlc:usb:probe>, pid=4154, e=11, t=1324495179
    Couldn't find device!
    Dec 21 13:19:39 zenlinux ptal-mlcd: ERROR at ExMgr.cpp:2525, dev=<mlc:usb:probe>, pid=4163, e=11, t=1324495179
    Couldn't find device!
    Dec 21 13:19:39 zenlinux ptal-mlcd: ERROR at ExMgr.cpp:2525, dev=<mlc:usb:probe>, pid=4172, e=11, t=1324495179
    Couldn't find device!
    Dec 21 13:19:39 zenlinux ptal-mlcd: ERROR at ExMgr.cpp:2525, dev=<mlc:usb:probe>, pid=4181, e=11, t=1324495179
    Couldn't find device!
    Dec 21 13:19:39 zenlinux ptal-mlcd: ERROR at ExMgr.cpp:2525, dev=<mlc:usb:probe>, pid=4190, e=11, t=1324495179
    Couldn't find device!
    Dec 21 13:19:39 zenlinux ptal-mlcd: ERROR at ExMgr.cpp:2525, dev=<mlc:usb:probe>, pid=4199, e=11, t=1324495179
    Couldn't find device!
    Dec 21 13:19:40 zenlinux ptal-mlcd: ERROR at ExMgr.cpp:2525, dev=<mlc:usb:probe>, pid=4208, e=11, t=1324495180
    Couldn't find device!
    Dec 21 13:19:40 zenlinux ptal-mlcd: ERROR at ExMgr.cpp:2525, dev=<mlc:usb:probe>, pid=4217, e=11, t=1324495180
    Couldn't find device!
    Dec 21 13:19:40 zenlinux ptal-mlcd: ERROR at ExMgr.cpp:2525, dev=<mlc:usb:probe>, pid=4226, e=11, t=1324495180
    Couldn't find device!
    Dec 21 13:19:40 zenlinux ptal-mlcd: ERROR at ExMgr.cpp:2525, dev=<mlc:usb:probe>, pid=4235, e=11, t=1324495180
    Couldn't find device!
    Dec 21 13:19:40 zenlinux ptal-mlcd: ERROR at ExMgr.cpp:2525, dev=<mlc:usb:probe>, pid=4244, e=11, t=1324495180
    Couldn't find device!
    thanks for your time and advise with this.
    --jerry
    Last edited by jk121960 (2011-12-21 19:36:05)

  • 10.5.4 does not solve airport disconnect problems

    Dear List,
    Like many here I've suffered the following symptoms:
    a/ Airport will connect to network without any problems, and shows 3-4 bars of strength.
    b/ The signal will suddenly just disconnect for no apparent reason. Seemingly randomly as it just occurs without any identifiable cause.
    c/ Attempts to reconnect will always require to enter the password again.
    d/ The dialog box will answer immediately "connection timeout" when it seemingly hasn't even tried to connect
    e/ Turning off airport then turning it back on seem to alleviate the problem, but still disconnects randomly about every 5 min or so, sometimes longer.
    This is now the 3rd system update where this issue has not been addressed. It seems to me some process is trying to access the keychain or something and simply is denied permission and then returns a 'time-out' error. But as the code is not open source there is no way to know.
    In any case this has got to be one of the most annoying problems I've ever had with an apple product. It renders the computer's connection to the internet practically useless, and with that most of the things I do with the computer.
    Has anyone noticed any substantial improvement with the latest update? If so, what did you do? I merely installed the update.
    Hoping you had better luck,
    JJ +

    That would be annoying...
    Clearly Leopards wireless is sensitive to some conditions that have not yet been identified properly. I know that some people experienced similar problems with 10.4.10 and 10.4.11 too.
    Anyhow, I have compiled a list of actions from these forums that have been helpful to some people.
    I suggest that you work your way through the list, and see how it goes. Given that you have a MacBookPro, you might want to pay particular attention to item 13.
    The length of the list demonstrates that there is no clear single problem. It seems likely that there are a range of issues that have the same consequence, and the hard part is to work out where your issues fit in:
    1) Reboot in Safe mode (hold the shift key down whilst starting up). Login to your account and then restart again. Can clear caches and perform occasional miracles. This is a MUST DO trouble shooting step, even if it doesn't lead to an immediate resolution.
    2) Turn off IPv6 (Network Preferences, Airport, Advanced, TCP/IP), unless you absolutely NEED IPv6 (which is unlikely) http://discussions.apple.com/thread.jspa?messageID=7311903#7311903
    3) Do an SMC Reset. This under-utilised option has been effective for a couple of people on a temporary basis, but I have not seen a permanent solution out of it. http://support.apple.com/kb/HT1411
    4) Remove /System/Library/Extensions/AppleAirport2.kext and /System/Library/PrivateFrameworks/AirPortConfig.framework IF they exist. They are remnants from Tiger or earlier, and not used in Leopard. http://discussions.apple.com/message.jspa?messageID=5684223#5684223
    5) Delete and reinstall the wireless network you are trying to use. Recreate it in a location other than Automatic. http://discussions.apple.com/thread.jspa?messageID=7327200#7327200
    6) Use OpenDNS as a replacement for your ISP assigned DNS servers. (The IP addresses are 208.67.222.222 ad 208.67.220.220). http://discussions.apple.com/thread.jspa?messageID=7243133&#7243133
    7) Use iStumbler (http://www.istumbler.net/) to check for other networks on the same frequency in the area. Interference seems to be a factor for some situations. http://discussions.apple.com/thread.jspa?messageID=7336681#7336681
    8) Change your router to Wireless B/G only rather than N. Or change the "RTS Threshold" and "Fragmentation Threshold" to 2306. http://discussions.apple.com/thread.jspa?messageID=6597226
    http://discussions.apple.com/message.jspa?messageID=6597226#6597226
    9) Change your the encryption settings on your router. If you are using WPA TKIP, try WPA AES or WPA2 TKIP-AES. http://discussions.apple.com/message.jspa?messageID=7336628#7336628
    Some people have found that 64 bit WEP is the only solution that works for them - but this is only one step better than having no security at all. http://discussions.apple.com/thread.jspa?messageID=7322517#7322517 (WEP is definitely NOT recommended)
    10) Check/disable your firewall and anti-virus software. http://discussions.apple.com/thread.jspa?messageID=7327931#7327931. If it works, you can re-enable the software selectively.
    11) Turn BlueTooth off (it could be causing conflicts). http://discussions.apple.com/thread.jspa?messageID=7325696#7325696 and http://discussions.apple.com/message.jspa?messageID=7387246#7387246. This is a clear winner for some people.
    12) Check for "conflicts" in the console (some people have found that Parallels networking was a source of errors) http://discussions.apple.com/thread.jspa?messageID=6933616&#6933616
    13) Remove Real Player from your system (this primarily seems to be affecting people who use a MacBook Pro). http://discussions.apple.com/thread.jspa?threadID=1549877&tstart=15
    14) Delete third party kernel extensions (such as tap.kext and tun.kext). If your Airport works in safe boot mode, this could be a clue that you have something to delete. http://discussions.apple.com/thread.jspa?messageID=7307179#7307179
    15) Turn off your Leopard firewall in addition to some of the other steps mentioned above. http://discussions.apple.com/thread.jspa?messageID=7409536#7409536
    16) Change your computer name on the network. http://discussions.apple.com/thread.jspa?messageID=7378381#7378381
    The last three are not recommended by me. I have included them because some have gained a resolution through them.
    17) Archive & Install to 10.5.1. This is not a solution open to those who have purchased their Mac since February 2008. http://discussions.apple.com/thread.jspa?messageID=7367913#7367913. I don't recommend this, as there have been a lot of issues fixed in Leopard since 10.5.1
    18) Change the MTU setting to 1392 on airport (the default is 1500). This seems an unlikely solution... http://discussions.apple.com/thread.jspa?messageID=7327455#7327455
    19) Restore an old version of IO80211Family.kext to your /System/Library/Extensions/ folder (this is potentially dangerous to the integrity of your OS, but seems to have helped some people). http://discussions.apple.com/message.jspa?messageID=7296202#7296202

  • Printing/Preview does not honour to printer page margins and garbles text

    I have this weird problem with printing. When I print, e.g., a pdf using preview, the page comes out of the printer incorrectly, that is the top 2.2cm gets chopped off and some of the characters have become unreadable (especially the I, the :, and the J). When I print the same pdf from adobe reader, the page comes out fine...
    The problem of chopping-off the top bit of a page also happens when I print directly from an application (e.g., thunderbird, firefox). Saving the print as PDF and printing that one with adobe reader again works fine.
    The problems occurs only when I print on my Lexmark Optra E312L (using the generic Postscript printer). On our HP Photo Printer (B9180), everything works as expected.
    I have already restarted the printing system, but while this did solve another printing problem, I still have this problem.
    So my question is: anyone else experiencing similar problems (ie., top of print chopped-off and garbled text) and, better yet, is there a solution?
    Thanks,
    Hayo

    Steve, thank you for trying to answer my question/solve my problem!
    You suggestions, however do not fully help in my case though
    I was already using the full printing dialogue, but nowhere did I find anything that might solve this problem. The print scaling, I did not want to use as I want the page to come out as-is (the pdf was an A4 and I print to A4). Note: border less printing or other ways of selecting a larger printable area doesn't work either; when I select the Lexmark, I have a very limited number of page size options and while it shows them, I can't use a custom page size (otherwise that could have solved the problem I guess).
    I did expect some things to get chopped-off but then evenly from all sides (ie, where it can't print). This is not what happens when printing from preview though. Today I tried again and while the results are the same, I now understand better what Preview does: it chops off only the top bit (what it does left and right, I don't know yet). In my opinion this is an error on the part of Preview because that way you never get the page exactly as it was intended. Adobe Reader does this much better, so that is what I will be using from now on.
    The other problem, the garbled text (mostly i's, j's, and :'s) is still there as well. So I guess there must be a problem in the printing engine of Preview in combination with the generic postscript driver...
    Heck, it gets even more interesting: I also tested printing from Firefox directly. This results in an error flashing on the printer, the printout got out of the printer ok-ish though. When saving the output as PDF and printing that with Adobe Reader again, the printer does not generate an error AND (more importantly), the output is much better quality wise (the rendering of the fonts and greys is much better).
    Right, I guess the lesson I learned here is not to use Preview/print directly when I want to print to the Lexmark and to take the route PDF->Adobe Reader->Lexmark instead.
    Is there a way I can let Apple know about bugs? (the garbled text certainly is a bug, the other things may or may not).
    Thanks again,
    Hayo

  • Hp 4015: Printing problem on A5 LABEL

    Hi, my new HP LJ 4015 have a problem when I print A5 LABEL, because the ink are not fixed hard on label.
    I Use MANUAL TRAY 1, LINEAR OUTPUT on the back oh the printer,  I set Size and Label type, I try to setup Fuser setting to HIGH 2, ENABLE SLOW SPEED, but the problem are not solved.
    The problem increase to the bottom of the A5 label, maybe because the ink needed more times on the fuser for fix it hard on label...
    Can you please suggest me the BEST CONFIGURATION for printing LABEL on this Laserjet??
    Thanks. Bye

    I have a couple of suggestions here, but these are both just guesses, since I can't see the label media that you are using.
    1.  If the label is thick, you may want to try setting the paper type to "heavy media".  
    2.  If the label is slick or shiny, it may not work well with any laser printer.    Was this label made for laser printing?

  • Windows 8/8.1 Partial Print Problems with Networked Inkjet Printers (Envy, Officejet and Deskjet)

    There are a lot of threads being posted about this problems with printing on the following these devices when they are connected in a Network Environment (Wireless or Wired)
    HP Officejet Pro 6830
    HP Officejet 6800
    HP Officejet Pro 6230
    HP Officejet 6220
    HP Officejet Pro 8610 e-All-in-One Printer series
    HP Officejet Pro 8620 e-All-in-One Printer series
    HP Officejet Pro 8630 e-All-in-One Printer series
    HP Officejet Pro 8640 e-All-in-One
    HP Officejet Pro 8650 e-All-in-One
    HP Officejet Pro 8660 e-All-in-One
    HP Officejet 7610 Wide Format ePrinter
    HP Officejet Pro 3610 Black and White e-All-in-One
    HP Officejet Pro 3620 Black and White e-All-in-One
    HP Officejet Pro 251dw Printer series
    HP Officejet Pro 276dw MFP series
    HP Officejet 7110 Wide format ePrinter
    HP Officejet Pro 501dw Printer
    HP Officejet Pro 401dw Printer
    HP Officejet Pro X451dw Printer
    HP Officejet Pro X576dw MFP
    HP Officejet Pro X476dn MFP
    HP Officejet Pro 451dn/551dn MFP
    HP Officejet Pro 451dw/551dw MFP
    HP Officejet 4630 e-All-in-One
    HP Deskjet Ink Advantage 4640 e-All-in-One Printer series
    HP Deskjet 2540 All-in-One Printer
    HP Deskjet Ink Advantage 2540 All-in-One Printer
    HP ENVY 5530 e-All-in-One Printer
    HP Deskjet Ink Advantage 4510 e-All-in-One Printer
    HP ENVY 4500 e-All-in-One Printer
    HP Deskjet Ink Advantage 3540 e-All-in-One Printer
    HP posted a workaround for this problem while they were working with Microsoft to get the root cause of the problem, many customers commented that the workaround helped them out and they were able to print. This workaround was not easy to use as the customer needed to add another printer manually and changed drivers.
    We can now announce that the problem has been fixed, the problem involved a Microsoft Network component that HP was using to talk to and track the printers on the network. This fix is being rolled out by Microsoft via Windows Update and anyone who has Windows Update enabled and set to automatically install updates should have already received this update. For those that do not have Windows Update setup to automatically install fixes the fix is available now and should be installed.
    The details of this fix and a manual method of installing it can be found here.
    http://support.microsoft.com/kb/3000461
    This fix is only designed for users that are using there printer on a Network (Wireless or Wired) and will not fix partial printing problems encountered with USB connections.
    There are many threads in HPs forums about this issue (below are links to a few of them)
    http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/Missing-partial-prints-amp-Printer-Offl...
    http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/HP-Envy-4500-cancels-job-in-the-middle-...
    http://h30434.www3.hp.com/t5/Other-Printing-Questions/Only-prints-half-a-page/m-p/4054888
    JonW
    I work for HP

    @tenkeypro 
    First, I would suggest you uninstall the exsisting driver and reinstall following one of these documents to see if it will clear this error message:
    Install HP print and scan software on a Windows 8 computer (32-bit and 64-bit)
    Universal Print Driver (no scan)
    Driver support included in Windows 8 / Windows 8.1 or in Windows Update
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution

  • Epson 5800, 6200 printer problems

    I have an iMac 24". After downloading Adobe reader 8, I can no longer print out a PDF-file. Some pictures print but not the text.
    Some days later there are major printing problems. Both printers ( PS3 ) dosen't print at all. The printers are stopped. When I press the continue button, printing process starts but get stopped again. I have reset the Printers system, checked for the latest printdrivers 1.0, checked USB connections in the systeminformation. How do I choose generic PS3 printer? Can that help or what's the problem?
    Thank you!
    todor. Thomas Dorch.

    Hello, den.thed
    This is from my error.log.
    Is this helpful to solve the printing problem?
    This hint; Hint: Try setting the LogLevel to "debug" to find out more.
    Is it something I can do?
    Best regards, Thomas Dorch.todor
    E [22/Jun/2007:15:24:42 +0200] PID 2488 stopped with status 64!
    I [22/Jun/2007:15:24:42 +0200] Hint: Try setting the LogLevel to "debug" to find out more.
    I [22/Jun/2007:15:24:42 +0200] Saving printers.conf...
    I [22/Jun/2007:15:24:52 +0200] Saving printers.conf...
    I [22/Jun/2007:15:24:52 +0200] Printer 'EPL_6200-1' started by ''.
    I [22/Jun/2007:15:24:52 +0200] Started filter /usr/libexec/cups/filter/pstops (PID 2492) for job 12.
    I [22/Jun/2007:15:24:52 +0200] Started backend /usr/libexec/cups/backend/usb (PID 2493) for job 12.
    E [22/Jun/2007:15:24:52 +0200] [Job 12] Unable to open USB Printing Class port: No such file or directory
    E [22/Jun/2007:15:24:52 +0200] PID 2493 stopped with status 64!
    I [22/Jun/2007:15:24:52 +0200] Hint: Try setting the LogLevel to "debug" to find out more.
    I [22/Jun/2007:15:24:52 +0200] Saving printers.conf...
    I [22/Jun/2007:15:25:11 +0200] Job 12 was held by 'thomasdorch'.
    I [22/Jun/2007:15:25:13 +0200] Job 12 was released by 'thomasdorch'.
    I [22/Jun/2007:15:25:15 +0200] Saving printers.conf...
    I [22/Jun/2007:15:25:15 +0200] Printer 'EPL_6200-1' started by ''.
    I [22/Jun/2007:15:25:15 +0200] Started filter /usr/libexec/cups/filter/pstops (PID 2497) for job 12.
    I [22/Jun/2007:15:25:15 +0200] Started backend /usr/libexec/cups/backend/usb (PID 2498) for job 12.
    E [22/Jun/2007:15:25:16 +0200] [Job 12] Unable to open USB Printing Class port: No such file or directory
    E [22/Jun/2007:15:25:16 +0200] PID 2498 stopped with status 64!
    I [22/Jun/2007:15:25:16 +0200] Hint: Try setting the LogLevel to "debug" to find out more.
    I [22/Jun/2007:15:25:16 +0200] Saving printers.conf...
    iMac 24"   Mac OS X (10.4.9)  

  • Error message 'System/Library/Extensions/AppleUSBEthernetHost' not able to print anymore

    Possibly the source of the error message is: 'AppleUSBEthernetHost.kext' has not been installed properly and cannot be used. on my Mac Book Pro'13 early '11 is http://download1290.mediafire.com/5u5azohfzhgg/zo22n2u2eml78vc/AppleUSBEthernetH ost, http://www.mediafire.com/download/zo22n2u2eml78vc/AppleUSBEthernetHost - I cancelled the download, but I found it in my downloads.
    Resulting that I cannot print any more wired and wireless. Please would you help to fix this problem at short term? Thank you.

    Hi Domique,
    Thank you very much for your answer. Yesterday I moved the file to the Trash and restarted the PC. Afterwards it didn't succeed to print.
    Today (at lunchtime) I didn't find the file AppleUSBEthernetHost.kext at all on my PC. I did request a software update, but no updates were available.
    I just (at dinertime) solved the wireless printing problem. By adding a new printer (my own printer) and gave it another name (extension of date of today). I did do this also yesterday, but it didn't solve both printing problems at all.
    Now I am able to print wireless. I also looked again if the file AppleUSBEthernetHost.kext was on the system. Yes! It was at the right place System/library/extensions/. It's an old file of 16.05.2011.
    The wired printing possibility is still UNSOLVED. Please would you help me to solve this problem too? Thank you very much in advance!

  • HP Printer Support Videos for Common Printer Problems

    The HP Support Forum shows many questions about print quality issues, paper jams, carriage jams, paper pick-up issues, and test page questions. The videos in the linked playlists below were created to show the steps to fix common printing problems for your HP printer. Each playlist contains multiple videos that pertain to the topic. Be sure to choose the video that applies to your topic and model number if applicable. The printer models are included in the title of the videos. Fixing Print Quality IssuesFixing Paper JamsFixing Carriage JamsFixing Paper Pick-Up IssuesPrinting a Test Page If you have further questions, please visit our YouTube Channel, HP Printer Support. The creators of these videos are the subject matter experts. I am just sharing the videos to help solve common printing problems.

    What does "hard error" mean?  How can I fix it.  My HP 4500 Officejet wireless printer is not printing when it says "printing" and further inquiry tells me there is a "hard error".  I have tried the usual plug and unplug.  

  • Printer problems with OS X 10.9.1

    My Epson stylus photo r3000 printer connected to my new iMac running OS X 10.9.1 does not print correctly; for example, a text file will print out as 2 identical columns instead of a single block of print; likewise for photos -- same photo twice, 1 in each column.  How can this be fixed? 

    I contacted Apple tech support, but they could not solve my printer-Mavericks-iMac-Epson Stylus Photo R3000 incompatibility problem & referred me to Epson tech support who solved the problem. They had me check my computer's harddrive Library -->Printers folder. Lo and behold, the Epson printer folder was missing. They had me go to Apple Support and download the missing folder. My printer and iMac and now compatible.

  • Printer problem

    I have a MAC G3 I am running Mac OS 10.2.8 I am also running Mac OS 9.2.2
    I had to buy a new printer. I replaced my Epson Stylus 740 with a
    Epson Stylus C88+. The problem is the printer works with everything I want to print except when I try to print a Quark document. I get an alert that says
    "Cannot open the printer. [64]"
    The Quark 4.0 app only works on the OS9.2.2
    Can a Quark document be saved to a PDF? That would solve the print problem I think.

    Get the utility PrintToPDF http://www.jwwalker.com/pages/pdf.html Works in OS 9 like the PDF print option in OS X.
     Cheers, Tom

  • RFQ Printer Problem.

    Hi,
    I have configured the message determination & also i have Assigned Output Devices to Purchasing Groups in SPRO.
    Also i have maintained condition records in MN01 based on document type.
    I have noticed that for one of the Purchasing Group, the RFQ Print out is getting displayed in ME9A.
    But the other 20 groups the status in ME42 shows not processed ("yellow').
    I am confused to see this. Waiting for the inputs.
    Thanks,
    Aj!

    Hello
    Please change the print program an form routines to standard one
    as mentioned in following notes.
    457497 FAQ: Message processing in purchasing
    111062 Printing problems in Materials Management
    Also please check condition record in tcode MN02.
    This notes usually clariffy printing problems
    Regards!

Maybe you are looking for

  • IBolt dock w/ music and navigation enabled - Line out speaker glitch

    This has happened 4 times since the JB update when in the car dock mode while cradled in the iBolt.  connection: - cradled in iBolt dock - connect line out to vehicle input jack - enables car dock mode steps: - play a music app - start navigation app

  • Can't see shared library

    I have a laptop which is new with the latest version of iTunes, running Windows 7, and a desktop computer with the latest version of iTunes, running Windows XP.  I signed in on the new computer with my Apple ID, same one I always have, and password. 

  • FM and Mobile Devices

    Hi, Our company is looking into mobile options. Does anyone have any experience using FM to create PDFs and then publishing to mobile devices? If so, were additional tools, such as plug-ins, required? Thanks.

  • How to create transaction codes

    hi, i have a program written and i need to have a transaction code to that program so that i can type in command field... can anyone just tell me the procedure to do this... thx in advance, regards, aj.

  • EA6900 Hangs

    Hi,  i'm facing a problem with Wireless routes EA6900  as i have 2 devices  one is used mainly to connect to the internet and the other one is set to be a bridge mode  to cover the whole house .. Let's say Router 1 is the main router   and Router 2 i