Not Solved: I'm no longer in Dover, can I change my screen name?

I've updated the post so it's right below. Please read
I'm no longer in Dover, can I change my screen name?
and you'll see I'm still waiting and that it's still this way after being assured it would be fixed.
It's not so much it wasn't done but that I was told it would be and it wasn't.
Drewdove

I guess Doug_VZ is Admin Emeritus if you have noticed. (GONE) So the only admin right now is Heather_VZ. You might want to send her a PM, but I am sure she is burried deep right now. Perhaps she can help if she does not see this thread anyway. You can point it out.
Send a PM to Heather_VZ
http://forums.verizon.com/t5/notes/privatenotespage/tab/compose/note-to-user-id/98927

Similar Messages

  • I'm no longer in Dover, can I change my screen name?

    Believe me I've look everywhere but haven't found the answer to this question. I picked the name Drew_from_Dover when I lived in Dover Delaware. I've since moved and would like to change my screen name to Drewdove, my twitter name. Can I do this and if so how? Thank you.
    Drewdove

    There you go! Your password remains the same.

  • How can I change the location name my iPhone pulls up when I am home. The info that pulls is not correct?

    How can I change the location name my iPhone pulls up when I am home. The info that pulls is not correct?

    If the size of the iPhone backup is putting you over the edge you have bigger problems than just this backup. You really need to solve the fundamental problem of your C: partition being too small. Even if you could solve the iPhone problem something else will come up soon that will again challenge your disk space. New drives can be had for well under $100, and even a 500 GB drive is only a little more than $100. This would be a good time to upgrade. You can even clone your current drive AND increase the partition size in one step with disk imaging software such as Acronis True Image.

  • I already have changed my apple id. But whenever I update any application, it is asking and using the old app id and password that is not a working e-mail already. How can I change my app id?

    I already have changed my apple id. But whenever I update any application, it is asking the old app id and password that is not a working e-mail already. How can I change my app id?

    So you made a new Apple ID? Unfortunately that won't work. Content is forever tied to the Apple ID that bought it. Apple does not transfer content from one ID to another and Apple does not merge Apple IDs. What should have been doen is mearely change the email address that was associated with the Apple ID.
    http://support.apple.com/kb/HT5621
    The only way that you can do this now is with a new email address if you used your current email address for the new Apple ID.

  • HT201240 I have a new macbook pro that did not have a disk, OS X was pre installed  so how can i change the administrators name and password, it did not migrate properly from my hard drive.., so how do i

    I have a new macbook pro that did not have a disk, OS X lion 7.3.4 was pre installed  so how can i change the administrators name and password, it did not migrate properly from my hard drive.., now there is some mysterious administrator name and or password??

    See #5
    Step by Step to fix your Mac

  • TS3899 I am receiving email on my iphone 5OS but I am not able to replay and forward. How can I change setting?

    I am receiving email on my iphone 5OS but I am not able to replay and forward. How can I change setting?

    Close out of the mail app, double tap the home button and completely close out of the app.
    Then do a reset, no data loss.  Hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
    Then check your email again.

  • HT204053 My Icloud account number is not the same as my Apple Account  how can I change my I cloud account  to match my apple . None of my photos  are going over to my I cloud

    My Icloud ID is not the same as my Apple ID how can I chamge my Icloud ID to match.  Non of my photos are streaming over to my Icloud  and I have been paying extra for additional storage space.

    Start here, change your country if necessary and go to manage your account and request another email.

  • Music I purchased on I Tunes is not available when I open ITunes in I Movie.  I Movie says those files are "protected" and not accessible.  What does that mean and can I change them to "unprotected" so I can use them in IMovie?

    Most of the music that I purchased on I Tunes I bought and downloaded on my old I Mac which I replaced with this I Mac about 9 months ago.  When I"m using I Movie on this I Mac and try to open I Tunes tab in I Movie, most of the files are not accessible because I Movie says those fields are protected. What does that mean and can I change those files to unprotected so they show up in my music in IMovie?
    This I Mac is OS X version 10.9.5 Maverick, 2.7GHz Intel Core 15 processor, 8GB 1600MHz DDR3 memory.

    Your older iTunes music purchases included DRM software to prevent sharing.
    iTunes Store: iTunes Plus Frequently Asked Questions (FAQ) - Apple Support
    For some money you can get it removed and get a better quality file to boot.

  • How do i change my security questions? And if the email i used is no longer there how can i change it?

    Okay so I am trying to purchase something but it will not let me unless i have those questions, and i dont remember any of the answers.. But when i tried sending it to my email, i disactivated the one that it was sending all the answers to.. So how can i change it to where i can send it to an active email account?

    The Three Best Alternatives for Security Questions and Rescue Mail
        1. Use Apple's Express Lane.
              Go to https://expresslane.apple.com ; click 'See all products and services' at the
              bottom of the page. In the next page click 'More Products and Services, then
              'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
              ID security questions' and click 'Continue'. Please be patient waiting for the return
              phone call. It will come in time depending on how heavily the servers are being hit.
         2.  Call Apple Support in your country: Customer Service: Contacting Apple for support or
              Apple ID- Contacting Apple for help with Apple ID account security. Ask to speak to
              Account Security.
         3.  Rescue email address and how to reset Apple ID security questions.
    How to Manage your Apple ID: Manage My Apple ID

  • FCPX10.1.1 does not solve the problem with long-time clip editing!

    OS: clean installed mac os10.9.1
    FCPX: FCPX10.1.1
    Project: 4clips, all of the clips is about 1 hour long (dvcprohd)
    Disk: 900MB/S++
    machine specs:
    2*3.06Ghz 6-core
    24GB DDR3
    and I've tried these graphic cards:
    K5000
    and
    2 5770
    all get the same results:
    If I double press the "L" key, the response of FCPX is too slow
    If I do other operation like browse the clip, or import long time clip,
    the FCPX will become too slow to browse the timeline.
    I've found the FCPX like to generate audio waves of the clip and
    there's no option to shutdown this! I've tried all the options in FCPX like
    do not show the waveform of audio in preference and close the audio waveform in timeline
    I don't think I can work the project with 10.1.x.
    the 10.0.9 also has the 1st problem, but don't have the 2nd problem.
    Another project: 2000++ 4K 50P clips(XAVC), but on FCPX 10.0.9, all of the clips is less than 40mins, always 20seconds.
    though it will get slower when we import clips day after day,
    it's much more smoother than 10.1.1!!!!!!
    so,
    I don't think we should update to 10.1.x for the little promotion of performance.
    and 10.1.x also do not support nvidia K5000 card.
    the render is slower than ait5700.....
    I hope apple can solve the problem,
    all of the above is just basic editing needs!
    if the fcpx can not do even a long-time clip editing
    why should I use it?

    2 project:
    1. 4*1 hour clips dvcprohd
    that's the problem! I can not bear it.
    2. 2000++clips 4K XAVC 50P project which I don't run on FCPX 10.1.1
    I run it in fcpx10.0.9, it's fine, but slower when I imported more and more clips.
    until now I can bear it.
    the fcpx10.1.1 editing long-time clip has problem:
    1.
    it use 150MB/s harddisk speed to generate the waveform.
    I have 900MB/s disk speed, so that's not the problem,
    but it generate all the time!
    1 hour clip's wavefrom generates for 1 hour without stopping, if I stop it , the fcpx crashed!
    2.
    when I skimming the clip for editing, the fcpx gets slower, always 2mins to response my operation.
    3.
    when I double press J or L key, the fcpx will need about 1 min to response.
    the FCPX10.0.9 editing long-time clip problem:
    the fcpx10.0.9 can handle the long-time clips, but also has very slow response when I doulbe press J or L key.

  • I am trying to create a folder and save it onto my desktop but apparently I do not have permission to do so. How can I change this?

    I am trying to figure out how to create a folder on my desktop. For some reason, my desktop folder is no longer available and whenever I try to set one up, an alert states that I do not have permission to create one. I don't know what to do.

    I think you need to repair user directory permissions.  Follow these instructions:
    http://osxdaily.com/2011/11/15/repair-user-permissions-in-mac-os-x-lion/

  • [SOLVED] Can't change laptop screen brightness.

    I'm using GNOME and can't seem to change my laptop screen brightness. The slider in settings will work by changing the value in intel_backlight between 0 and 4882 but the actual brightness of the screen will not change.
    If I use the kernel line acpi_video = vendor all it does is create another interface called dell_backlight alongside intel_backlight which changes from 0 to 15 by changing the slider or pressing fn  + f5 and fn + f4.
    I have nouveau and intel graphics drivers installed and I'm running arch on a Dell XPS15 (L521x).
    Any help would be appreciated.
    EDIT: Solved this by adding the kernel parameter video.use_native_backlight=0
    Last edited by badministrator (2015-04-12 05:33:33)

    Head_on_a_Stick wrote:
    Have you tried this kernel parameter:
    video.use_native_backlight=1
    Other possibilities listed here:
    https://wiki.archlinux.org/index.php/In … adjustable
    Yes I have tried this, unfortunately GDM will not start if this is enabled.

  • .bin extension defaults to wrong action and is not listed in options applications tab. I can't change the action.

    I recently installed VLC player and it has overtaken my system.
    When I click on .bin (ext) files in a Firefox browser window, the default action is now listed as "VLC.bin (default)" and nothing I do can change it. I want the default action to be to download the file and I would like to remove any option related to VLC, since no .bin file should ever be associated with that program.
    There is no listing for a .bin extension for VLC (or any other program, for that matter*) in the Options/Applications tab, nor is VLC player the default action for anything listed except .wav files.
    I have tried the following:
    1. searched the options/applications tab but found nothing.
    2. searched "about:config" for any entries with "bin", ".bin", or "vlc" (one at a time) and found nothing.
    3. searched the registry for bin extension entries. I found one:
    [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.bin\OpenWithProgids]
    "bin_auto_file"=hex(0):
    "VLC.bin"=hex(0):
    I deleted the key and rebooted. No change.
    4. Double checked [HKEY_CURRENT_USER\Software\.. Gabest and Mozilla keys for anything that could be causing this behavior.
    Found nothing.
    Any help would be appreciated.
    *As far as I can tell. However, the applications tab cuts off many of the extension names and the column cannot be extended, so I can't be certain. VLC added 34 extensions to the list (!), most of which default to using the Quicktime plugin 7.6.8.

    Thanks jscher2000, I tried your suggestion, but no joy (as expected). None of the extensions were .bin, and in fact, I can't find a single listing for handling the .bin extension in the entire (unfiltered) list.
    That's why I'm so confused. Where is Firefox getting the name "VLC.bin (default)" from in the first place?
    cor-el, I checked out the link that you posted.
    I don't have an entry for "browser.download.pluginOverrideTypes" and the entry "plugin.disable_full_page_plugin_for_types" was empty (default setting).
    My bad, but I forgot to mention in my first post that I had also tried renaming the mimetypes.rdf file in my "Application Data\Mozilla\Firefox\Profiles\xxx.default\" to .old to no avail.
    Firefox created a new, almost empty file, but it didn't change the behavior for .bin files. I removed the new file and put the old file back in place after determining that clearing the file did not help, since I am otherwise happy with my current file-type options.
    However, since the option to "Always perform this action" is grayed-out, I am looking into the possibility that the website is sending a misconfigured MIME type or is assigning "Content-Disposition: attachment" to the download. What's odd, though, is that I've never had problems getting binary files from the site in the past, and the problem started when the VLC player was installed.
    I'll post back after I check into the server header data.

  • I'm from Canada and so is my phone. Now I live in France and when I want to download apps, sometimes it says that I can't because those apps are not available for Canada apple store. How can I change the country?

    Thanks for your help

    It's not a matter of changing the country. The issue is your credit or debit card credentials must be associated with the same country where you reside.
    "Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location."
    From here >  The Complete Guide to Using the iTunes Store | iLounge Article
    You can change the country by clicking the round flag icon bottom right side of the App Store window.

  • My apple id is shared with two younger siblings, they have changed the security questions and i do not know the verification email address and i can't change it. what do i do?

    i do not know what the email that contains the answers to my security setting are going to... i just put itunes creditgs on my apple id. now i'm unable to purchase anything without the answers. ugh. help

    You need to contact Apple. Click here, phone them, and ask for the Account Security team, or fill out and submit this form.
    (93221)

Maybe you are looking for

  • Fcp video stutter and processor overload

    I'm editing on Intel MacBook Pros and on one I'm encountering (after downloading a series of software updates) a slight stutter with Quicktime files played in Final Cut Pro. The other machine is fine (and didn't have the updates). Both run FCP 5.1.4.

  • Epson CX5000 driver doesn't show up on Epson model list when I add printer

    I am trying to add an Epson CX5000 to my printer list. The printer is connected to a windows PC running XP. While I have no problem finding the printer and making the connection, when I get to the point of picking the model in the drop down printer l

  • Alternatives to ATI Radeon X1900 XT 512 MB

    Hi Guys, I'm pretty sure my ATI Radeon X1900 XT 512 MB graphics card has failed... I run MacPro1,1 (2008) Dual-Core Intel Xeon with 2 x 23-inch DVI Apple Cinema Displays. Tonight only one of the screens would wake from sleep - the screen in port 2. I

  • Envirnment set up - TEST ,DEVL,PROD

    How to set my server environment as Test,Development,Production. Example: In IBM websphere we have enviroment variables to set in server configration from admin. Similiraly this is can be set in weblogic. This is first time am working with OC4J serve

  • Printing with the setMask on a clip???

    I'm trying to print a movie clip that is being masked with a jpeg that is shiny surface. printAsBitmap("_root.designStage.designImageMC","bmovie") or my_pj.addPage(_level8, {xMin:570, xMax:980, yMin:100, yMax:500}, {printAsBitmap:true}); both are pri