NOT speaking the incoming callers name (N95)

I've searched everywhere (through the manual and countless forums online) and have been unsuccessful in finding an answer to this. Does anyone know of a way of turning off the feature that speaks the name of the incoming caller.
Although it's really useful, there are far too many times when I don't want it to announce to everyone who is calling.

29-May-200705:55 PM
jg01 wrote:
also wont say name or produce the callers name if its in contacts more than twice...
watch out for duplicates!
jg
Thanks, but you mean more than once don't you!?
Ive come across that before on an old 6310. Had me stumped for ages, then I realised my brother was in as 'Brother' and by his name. Obviously the phone doesn't know which to show, so shows neither.

Similar Messages

  • How to hide or do not show the receipt's name after miss called?

    1. How to hide or do not show the receipt's name after miss called?
    2. I do not want to show my message statement in the screen.

    I have also registered to this forum to inform that the problem with showing the MAC-address in the sidebar of the finder is still not solved.
    The strange thing is that the Embedded Web Server says:
    "This specifies the Bonjour domain name assigned to the device, in the form <host name>.local. If a user-specified host name has not been assigned, the default host name HPxxxxxx is used, where xxxxxx are the last 6 digits of the LAN hardware (MAC) address. This option cannot be modified."
    But I did assign a user-specified host name and that name does show-up everywere (also within Bonjour), except in the sidebar of the finder (hp###xx##x####). Lots of people have the same issue, when searching on the interet, but not one has found the solution.
    Please help with solving this issues?

  • Hello Apple!   I'm Vietnam, I do not speak the language you have to translate it to google.  I have the old one so bought iphone4 8gb IMEI: 012540006987250 ICCID: 8,984,011,302,509,158,485. After the 7.0.6 update wool restore the computer, it requires icl

    Hello Apple!
    I'm Vietnam, I do not speak the language you have to translate it to google.
    I have the old one so bought iphone4 8gb IMEI: 012540006987250 ICCID: 8,984,011,302,509,158,485. After the 7.0.6 update wool restore the computer, it requires icloud id. I do not know what it's id. Because there were so many phone users so no one knows. Now it becomes a paperweight map. Is there a way to reopen the phone there? I hope you can help me, I do not want to waste the money spent, so the phone becomes useless. Thank you very much!

    Hi there, this isn't Apple but a users discussion forum. For iCloud use your Apple ID.

  • I have a problem with your app store, always I want to update a new app, I want to know what Schiffer and novelty app! Most of my applications are in English, and they write what the improvement and renewal are written in English, and I do not speak the

    Hi
    I have a problem with your app store, always I want to update a new app, I want to know what Schiffer and novelty app! Most of my applications are in English, and they write what the improvement and renewal are written in English, and I do not speak the language! I try to copy the text, color (gray) is not successful, the variance can it, so we can copy the text and translate?
    I thank you for your help, it can help to humanize

    You are right, but how could i send it to Apple? when the phone company first replaced my iphone they had in stock alots of iphones and they just sent mine back to Apple and gave me a new one, so all i did is to give them my phone, but now how could i sent it to Apple? and i cant send it by myself, and the store wont do that, its a lost for them.. so sending it to Apple wasnt an option from the begining.
    and for the record, i dont think the store where i bought it is an authorized shop.. its just a store who boughts phone's from Apple in a low price and sells it in much more money..

  • Framemaker uses $filename for short file name, can we edit this to change appearance? We do not want the short file name of long filename to include the .fm extension can this be removed or modified to make this happen?

    Framemaker uses <$filename> for short file name, can we edit this to change appearance? We do not want the short file name of long filename to include the .fm extension can this be removed or modified to make this happen? In compiling our books it would be helpful to not have this extension appear as it then requires us to create extra files without them.

    See: System Variables

  • Certificate does not contain the correct site name

    Hello,
    I have to make a midlet that connect to a tomcat 5.5.9 server with ssl.
    I import the certificate whit tomcat alias in the wireless toolkit but when i run the midlet this error appear: Certificate does not contain the correct site name
    import java.io.*;
    import javax.microedition.midlet.*;
    import javax.microedition.io.*;
    import javax.microedition.lcdui.*;
    public class HelloNet extends MIDlet implements CommandListener , Runnable{
    // User interface command to exit the current
    // application.
    private Command exitCommand = new Command("Exit",
    Command.EXIT, 2);
    // User interface command to issue an HTTP GET
    // request.
    private Command getCommand = new Command("Get",
    Command.SCREEN, 1);
    /// The current display object.
    private Display display;
    // The url to GET from the 'net.
    private String url;
    * Initialize the MIDlet with a handle to the
    * current display.
    public HelloNet() {
    url = "https://127.0.0.1:8443/Hello.txt";
         display = Display.getDisplay(this);
    * This lifecycle method should return immediately
    * to keep the dispatcher
    * from hanging.
    public void startApp() {
         showPrompt();
    * Display the main screen.
    void showPrompt() {
    String s = "Press Get to fetch " + url;
    TextBox t = new TextBox("Http Result", s,
    s.length(), 0);
    t.addCommand(exitCommand);
    t.addCommand(getCommand);
    t.setCommandListener(this);
         display.setCurrent(t);
    * pauseApp signals the thread to stop by clearing
    * the thread field.
    * If stopped incorrectly, it will be restarted from
    * scratch later.
    public void pauseApp() {
    * destroyApp must cleanup everything. The thread
    * is signaled
    * to stop and no result is produced.
    * @param unconditional is a flag to indicate that
    * forced shutdown
    * is requested
    public void destroyApp(boolean unconditional) {
    * commandAction responds to commands
    * @param c command to perform
    * @param s Screen displayable object
    public void commandAction(Command c, Displayable s) {
         if (c == exitCommand) {
         destroyApp(false);
         notifyDestroyed();
         } else if (c == getCommand) {
              Thread th= new Thread (this);
              th.start();
    * Read the content of the page.
    public void run() {
    TextBox t = null;
    StringBuffer b = new StringBuffer();
    HttpsConnection c = null;
    InputStream is = null;
         try {
         int len = 0;
         int ch = 0;
         System.out.println("Cerco di leggere");
    c = (HttpsConnection)Connector.open(url);
    c.setRequestMethod(HttpsConnection.GET);
         is = c.openInputStream();
    // length of content to be read.
    len = (int) c.getLength();
    if (len != -1) {
    // Read exactly Content-Length bytes
    for(int i=0; i<len; i++) {
    if((ch = is.read()) != -1) {
    b.append((char) ch);
    } else {
    // Read until connection is closed.
    while((ch = is.read()) != -1) {
    len = is.available();
    b.append((char) ch);
    t = new TextBox("Https Result", b.toString(),
    b.length(), 0);
         } catch (Exception e) {
    e.printStackTrace();
    String s = e.toString();
    if(s != null) {
    t = new TextBox("Https Error", s, s.length(),
    0);
    } finally {
    if (is != null) {
         try {
              is.close();
         } catch (Exception ce) { }
    if (c != null) {
         try {
              c.close();
         } catch (Exception ce) { }
    display.setCurrent(t);
    }

    re: code tags, please see http://forum.java.sun.com/help.jspa?sec=formatting.
    As for the rest:
    See, we now know that you used keytool to generate you certificate. You need a new certificate. This time, when keytool asks you for a first and last name, type 127.0.0.1.

  • JRockit_160_05_R27.6.2-20 can not get the correct os name for windows 2008

    JRockit_160_05_R27.6.2-20 can not get the correct os name for Windows Server 2008 SP1 using System.getProperty("os.name").
    System.getProperty("os.name") will return Windows Vista instead of Windows Server 2008 when running on Windows Server 2008 SP1. Is it a bug of this jdk?
    I tested it on Sun JDK 1.6. It returns the correct name Windows Server 2008.
    Any suggestion will be welcomed. Thanks in advanced!
    Edited by: user4516182 on May 13, 2010 12:59 AM

    Staffan, thanks for your update.
    Do we have a workaround for it or fix it in new release?

  • I had to restore my ipad but do not remember the original used name or password and now cannot start up the ipad. pl help

    could not restart my ipad after restoring it as I could not remember the original user name or password I had associated it with then.

    Try to reset your password at My Apple ID (appleid.apple.com) as described in this document:
    iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/HT5818
    What if I forget my Apple ID password?
    If you forget your password, you can reset it at My Apple ID (appleid.apple.com) or by contacting Apple Support and verifying your identity. Once your password has been reset, it will work normally with Find My iPhone and Activation Lock.
    If you forget your password and cannot reset it, you will lose access to your Apple ID and may be unable to use or reactivate your device. To help prevent this, visit My Apple ID periodically to review and update your account information.

  • *82 in phone number causes phone not to recognize incoming callers

    With my old phone, I put *82 in some numbers to allow only those people to see it was me calling. When they called, the phone was smart enough to ignore the *82 and resolve their name. With the iPhone it seems that if I have *82 in a phone number, it never recognizes the incoming caller. annoying. Is that a bug?

    This started happening to me on my iPhone 4. Some text messages show only the numer they came from and those same numbers do not show the contact name in my calls list, even though the contacts are saved and synced via iCloud. I have tried to save different versions of the number in the same contact, but it won't work. If I call one of the recent numbers though, the conact comes up. I have tried reseting and restoring to no avail.

  • Windows 8.1 will not see the Printers host name or ip address

    I have tried installing an OfficeJet Pro 8615 on two different Windows 8.1 computers (wireless)  but did not connect.  Pirnter is connected to network wireless (192.168.111.153). Router is 192.168.111.1. The printer was installed from a Vista (wired) desktop and it connected and printed fine. Both 8.1s can ping router but not the printer. Host name install does not work either. Router is a new Cisco RV180w. It works fine everywhere else. Printer wireless power is 5 of 6. Have looked for shared devices setting on Win 8.1 but have not found it yet. Win 8.1 computers are both 64bit and the install download showed 64x. I am running out of things to check. Can anyone help me? Win 8.1 computers sees other devices on the network but not the printer. Print & Scan Doctor does not see the printer either.
    Now I am having the same problem with a Win7 (64) install. It can't see it either. Once I plugged this one into the network then it saw the printer and installed and printed. But if I unpluged the network wire and made it wireless then it stopped seeing the printer. So I am having some  kind of a wireless issue.

    Hi @EdEdata ,
    Thank you for visiting the HP Support Forums and Welcome. Thanks for all the details of what you have done and the restuls. (Very helpful) I have read about your HP OfficeJet Pro 8615 Printer not connecting wireless and is not seen by the Print and Scan Dr. Here is a document on printer does not keep a wireless connection.  Try assigning a Static IP address. You might have to change the channel.
    Make sure your computer is connected to 802.11b/g/n wireless router over a 2.4 GHz connection. NOTE: HP Printers are currently not compatible with 802.11n 5.0 GHz networks. This HP document here, explains about a printer wireless.
    If this does not help you, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link to get the support number for your region.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • How to get the incoming file name using JMS adapter and SOAP adapter

    Hi Everybody,
       In one of my interface i need to get the file name of incoming flat file using JMS adapter at sender side. and then i am using xslt to convert it to IDOC and then posting to  SAP IDOC.
    my incoming filname are in this form price<DateTimestamp>.txt. when i do the tranformation this incoming file name should be part of one element in the IDOC which i am posting.
    EX:
    <IDOC
    <REF>price<DateTimestamp>.txt</REF>
    </IDOC>
    Hope it is clear to everybody. I need your suggestion how i can capture this incoming file name and send it as part of IDOC.
    Thanks
    raj

    If they are passing it in message id or correlation id,
    you can access it using
    <xsl:variable name="dynamic-conf" 
            select="map:get($inputparam, 'DynamicConfiguration')" />
        <xsl:variable name="dynamic-key"  
            select="key:create('http://sap.com/xi/XI/System/JMS', 'DCJMSMessageID/ DCJMSCorrelationID')" />
        <xsl:variable name="dynamic-value"
            select="dyn:get($dynamic-conf, $dynamic-key)" />
    Check this:
    http://help.sap.com/saphelp_nw70/helpdata/en/f4/2d6189f0e27a4894ad517961762db7/content.htm
    Thanks,
    Beena.

  • Can not delete the incoming invoice- is "held"

    Hi, can anybody help me?
    What can be done if to PO an incoming invoice was created, but beacuse of some error messages only held, not posted. Now, if they try to delete the invocie (though transaction MIR4) , the message comes :
    Invoice document xxxxxx cannot be processed further
    Message no. M8422
    Diagnosis
    The invoice document xxxxxxxx contains the purchasing document xxxxxxxx, and the item 00290. You cannot enter the invoice for this item, or you cannot cancel the invoice document. This can have various causes, for example:
    - The PO item is locked
    - THE PO item is flagged for deletion
    - Another employee is currently processing the purchase order
    - The purchase order has not yet been released
    - The corresponding service entry sheet has been deleted
    - For a held invoice for planned delivery costs: the vendor in the held invoice does not match the vendor in the purchase order condition or with the vendor from the purchase order history. This is because the vendor in the purchase order condition has been changed in the meantime. -> In this case, you can no longer process the held document. You can use report Z_MRM_DELETE_PP from note 501905 to delete the document
    The position 290 in Po seems to be ok, no deletion flag or something else, no change of vendor.
    Could be the problem caused by the fact, that in the meantime the reall invoice to the same PO was created and also posted?
    So how can we delete the held invoice without implementing the note?

    Hi,
    Please check the frieght condition in the PO item detail screen by taking the icon magnifying glass and check wheather the vendor is changed.
    Regards,

  • BUG- Alt clicking adjustment layer icons Not giving the opportunity to name the layer in CS6 Beta?

    Using Windows 7 Ult, 64-bit:
    I notice when I alt-click an adjustment layer icon, the layer automatically drops in with a default name--rather than giving me an opportunity to type a name for the A/L via the "new layer" dialog box.  For example, in CS5, when you alt-click on the hue/saturation ajustment layer icon, you are given a dialog box in which you can name the layer, select clipping mask, blend mode, color select, etc--then the layer populates in the composition. In CS6 beta, when I hold the "alt" key and click the adjustment layer icon for hue/sat, I'm not getting the new layer dialog box at all.  Is this a bug or a modifier key change in CS6? 

    It should still work from the layers panel. You have to hold the alt key before going to the adjustments menu at the bottom of the layers panel.
    It doesn't seem to work from the adjustments panel unless you use the flyout menu and then you don't have to add the alt key to get the dialog.
    Message was edited by: R_Kelly

  • HT201184 I do not know the sign-in name & password on my eMac to be able to use it. How can I change the password & sign-in in order to use the computer?

    I do not know the sign-in & password to able to use my eMac computer. How can I change the info so I can use it?

    OS X: Changing or resetting an account password

  • IPhone5 does not mute the incoming call when the earbuds are plugged in

    How come? I expected the phone calls to ring in the earbuds, not in the phone itself.  How do I set up the phone so when I have the earbuds plugged in the phone doesn't ring in the middle of a meeting.

    I have this exact problem, have you had any luck solving it Louise? I see that no one has replied so I was wondering if you ever solved the problem. If you did can you please respond back with what worked for you?

Maybe you are looking for