Not Starting - Windows xp

When I switch on the laptop blank screen appears.
I tried to enter by giving f10 but screen appears bank.
Plz gig me suggestion to switch on my laptop.

Hi AntonyJeni,
Welcome to the HP Support Forums!
I would like to be able to assist you with hopefully getting your computer to start again! The troubleshooting steps that you will need to follow in hopes of bringing your computer back to life are in the following link Computer Does not Start (Windows 7, Vista, XP). The symptom that you will want to click on is LED lights do not glow, display is black, computer does not start.
Please let me know the outcome of the troubleshooting steps.
Looking forward to your response!
I worked on behalf of HP

Similar Messages

Does not start windows and just show me the HP System recovery window

Hello,
I have a HP G60-445DX Notebook PC. When I start the PC just open the Recovery Manager and does not open windows.
I have an upgrated Windows Vista to Windows 7 version and do not have any installation CD just the ones which were send for the upgrade (HP Upgrade Manager and Windows 7 Home Premium Upgrade Media).
I do not want to run the System Recovery since I need to recover some files. How can I run windows? I do not have any installation CD and if I need which one Vista or Windows 7? Could you please advise me?
Thank you for your help!

Hi,

Satellite M115-S3154 will not start Windows XP

Opened new post per Jerry concerning my 3yr old Satellite: M115-S3154 w/ Windows XP Media Ctr Ed 2005
Yesterday upon start up, I immediately rec'd message stating:
- "windows did not start successfully - recent hardware or software changes might have caused this"
- it gave options to restart in the 3 different Safe Modes, last known configuration and start normally - none of these worked. I've tried numerous times yesterday and today with absolutely no luck.
When I shut laptop down 2nites ago, it seemed like it shut down extremely fast?! Today I realized that battery yellow light was on and thought maybe it wasn't charged enough. Charged for over 2hrs, have a blue light, but still had same experience as above.
- I removed and replaced battery - no luck
- I removed and replaced HDD - no luck
I just now, followed your advice on pressing F8 immediately after start - however, there is no repair mode or whatever you mentioned under the Windows Advanced Options Menu for this laptop - what I do have is
= the 3 different Safe modes - tried all these, no help
= Enable Boot Logging - tried this, no help
= Enable VGA Mode
= Last Known Good Configuration... - tried this, no help
= Directory Services Restore Mode (Windows domain controllers only) - tried this, no help
= Debugging Mode - tried this, no help
= Disable automatic restart on system failure
= Start Windows Normally - tried this, no help
= Reboot - tried this, no help
= Return to OS Choices Menu
I attempted the Microsoft Knowledge Base article suggested by Jerry -
Advanced troubleshooting for general startup problems in Windows XP - but no help.
I also tried MS article 310353 - How to configure WinXP to start in a "clean boot", but under Method 1, the downloadable guided help would not run on this computer i'm using to figure out the Toshiba problem. Method 2 of this guide requires you to be able to open windows - pretty dumb since I can't get windows to run in first place! So I'm still stuck.
I do have the original Toshiba Recovery and Applications CD - I have many files and pics that I do not want to lose.
thanks roo

Satellite M115-S3154
there is no repair mode or whatever you mentioned under the Windows Advanced Options Menu for this laptop
That was for the Windows Vista thread you jumped in to.
= Disable automatic restart on system failure
Did you try this one? Instead of a reboot, it should give you a blue screen with the STOP error and possibly the file responsible. We could use that information.
Ihave many files and pics that I do not want to lose.
If the hard drive is still okay (there's no reason so far to doubt that), we should be able to rescue the files.
One way is to put the hard drive in an enclosure and plug that into another computer.
You can also make a bootable CD with tools. Let us know.
-Jerry

Acrobat Pro X 10.1.10 Does Not Start Windows 8.1

I have Create Suite CS6 which apparently bundles Adobe Acrobat Pro X. I have upgraded to 10.1.10. Under Window 8.1, this version simply does not start. There is no startup screen. There is no error in EventViewer of Windows. It simply does NOTHING.
I went to Windows Program and Features and did a "Repair" on Acrobat Pro X. This redid the install but the result is the same.
Is there a known compatibility issue here? How do I work around this?

Hello,
Have you tried to run the Acrofix patch on your computer?
If not, please follow this link, http://helpx.adobe.com/creative-suite/kb/acrobat-failed-launch-30-days.html
Regards,
Yuvraj.

Satellite C660D froze and does not start - Windows failed to start

Ok pretty much the most dense person you will ever likely to meet when it comes to things like this. but will try my best to explain.
Couple of days ago my laptop froze on me resulting on me having to turn it off and start it again by the power button. When I started it again the message below appeared.
WINDOWS ERROR RECOVERY
Windows failed to start . A recent hardware or software change might be the cause.
If windows files have been damaged or configured in incorrectly, start up repair can help and diagnose the problem, if power was interrupted during start up, choose start windows normally.
-Launch Start up repair (recommended)
-Start windows normally
When I press Launch Start up repair it goes to a screen with a big cursor (which you can move around) but nothing else happens.
When I pressed on the start windows normally setting it went through to the windows logo whilst starting up but then stalls at this point.
My question is, is it easy to fix & if not where is the best place to take it to get fixed. Said I was pretty dense :p
Thanks for looking
Dean

>My question is, is it easy to fix & if not where is the best place to take it to get fixed. Said I was pretty dense
I think its easy to fix but you would need an Toshiba Recovery disk.
Did you create one in the past?
If not, try to start the HDD recovery: power up the unit, press F8. Now choose Repair my Computer.
Now new Window should open and here you should choose Toshiba HDD recovery option. This would set the notebook back to factory settings.
In case this isnt possible, you would need to boot from a recovery disk to reinstall the system.

WDS service will not start Windows Server 2012 R2 with Update

Greetings,
After building my WSE box clean with new hardware and with Update version of WiSE 2012 R2, I find that it let me set up Windows Client Restore but now the WDS Service will not start for love nor money.
Any suggestions? Am I missing a Win-PE boot Image? Should I do something else?
Please assist,
Bob Hessenauer

All,
The problem was a conflict between DHCP and WDS. Followed the instructions in this article and all is now fine:
https://vkarthickeyan.wordpress.com/2013/05/21/wds-service-unable-to-start/
Just so you know,
Bob Hessenauer

CE7.2 server not starting - Windows XP (SP2)

Hi, I have installed the CE7.2 server trial version on a 32 bit system (windows XP Professional SP2). I think as per the server requirement, it is matching the requirement. Also installation was sucessful and there was no error. But when i am starting the server, it is not starting up (Status - yellow - some processes are running).
When I check the trace file(dev_server0), there is error related to 'Java VM shared library issues'
Please let me know, if anybody has any idea about solving this issue.
Total physical memory - 4 GB
Regards
Satya
Thu Jun 03 10:54:22 2010
F ********************************************************************************
F Java environment properties
F    root directory    : C:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007/sapjvm_6
F    vendor            : SAP AG
F    version           : 1.6.0_07
F    cpu               : x86
F    java vm type      : server
F    java vm version   : 6.1.007
F    jvm library name : jvm.dll
F    library path      : C:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin\server;C:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin
F    executable path   : C:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\bin
F    SAP extensions    : available
F ********************************************************************************
I [Thr 1956] MtxInit: 10002 0 2
I [Thr 1956] MPI: dynamic quotas disabled.
I [Thr 1956] MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
I [Thr 1956] *** ERROR => [MapOsShm] Can't find free space for Shared Memory (Size=84239 KB)
               [shmnt0.c     2249]
I [Thr 1956] *** ERROR => [AttachOsShm] MapViewOfFile(Key=62,Handle=0x000005C8) failed with Err=0
               [shmnt0.c     2249]
I [Thr 1956] *** ERROR => ShmCreate: Attach (62,86260736,2) failed [shmnt0.c     426]
I [Thr 1956] *** ERROR => ShmCreate( ATTACH 62, 86260728) failed 1 [mpixx.c      1064]
I [Thr 1956] *** ERROR => FcaInit: MpiInit failed (rc=MPI_ERROR: General error(1)) [fcaxxcomm.c 928]
I [Thr 1956] *** ERROR => JfcaInit(): Native FCA layer broken: 1 **unknown error occurred** [sfxxjfca.c   5264]
F [Thr 1956] *** ERROR => SfCSapVm::initJniClasses: com.sap.bc.proj.jstartup.fca.FCAProperties::mInit() failed (rc = 1) [sfxxjvm.hpp 362]
F [Thr 1956] *** ERROR => SfEInternalError: JNI class init failed [sfxxjvm.hpp 373]
F [Thr 1956] *** ERROR => Operation failed: SfEInternalError: JNI class init failed
[sfxxmain.cpp 1171]
F
F ********************************************************************************
F *** ERROR =>
F ***
F *** Please see section 'Java VM shared library issues'
F *** in SAP Note 1316652 for additional information and trouble shooting advice.
F ********************************************************************************
F
F [Thr 1956] *** LOG => exiting (exitcode -21001, retcode 2).

Hye to All,
We have also downloaded CE 7.2 90 days trial Version. I tried different SAP notes provided at SERVICE MARKET PLACE, but still facing the same problem.
1) I made changes to heap size as per specification given here......
http://help.sap.com/saphelp_nwce71/helpdata/en/43/73949862c16fcbe10000000a1553f6/content.htm
2) I Made changes in BOOT.ini as well.
SYStem specifications are
RAM of my system is 2 GB.
I also tried witth 3 GB RAM but same problem.
32 bit system (windows XP Professional SP3).
Installation was sucessful and there was no error. But when i am starting the server, it is not starting up (Status - yellow - some processes are running).
When I check the trace file(dev_server0), there is error related to 'Java VM shared library issues'
Please let me know, if anybody has any idea about solving this issue.
Regards,
AJAY TOMAR
This is DEVELOPER TRACE
trc file: "dev_server0", trc level: 1, release: "720"
Tue Nov 30 15:31:16 2010
F ********************************************************************************
F Java environment properties
F    root directory    : D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007/sapjvm_6
F    vendor            : SAP AG
F    version           : 1.6.0_07
F    cpu               : x86
F    java vm type      : server
F    java vm version   : 6.1.007
F    jvm library name : jvm.dll
F    library path      : D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin\server;D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin
F    executable path   : D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\bin
F    SAP extensions    : available
F ********************************************************************************
I [Thr 888] MtxInit: 10002 0 2
I [Thr 888] MPI: dynamic quotas disabled.
I [Thr 888] MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
I
I [Thr 888] Tue Nov 30 15:31:17 2010
I [Thr 888] *** ERROR => [MapOsShm] Can't find free space for Shared Memory (Size=84239 KB)
               [shmnt0.c     2249]
I [Thr 888] *** ERROR => [AttachOsShm] MapViewOfFile(Key=62,Handle=0x00000520) failed with Err=0
               [shmnt0.c     2249]
I [Thr 888] *** ERROR => ShmCreate: Attach (62,86260736,2) failed [shmnt0.c     426]
I [Thr 888] *** ERROR => ShmCreate( ATTACH 62, 86260728) failed 1 [mpixx.c      1064]
I [Thr 888] *** ERROR => FcaInit: MpiInit failed (rc=MPI_ERROR: General error(1)) [fcaxxcomm.c 928]
I [Thr 888] *** ERROR => JfcaInit(): Native FCA layer broken: 1 **unknown error occurred** [sfxxjfca.c   5264]
F [Thr 888] *** ERROR => SfCSapVm::initJniClasses: com.sap.bc.proj.jstartup.fca.FCAProperties::mInit() failed (rc = 1) [sfxxjvm.hpp 362]
F [Thr 888] *** ERROR => SfEInternalError: JNI class init failed [sfxxjvm.hpp 373]
F [Thr 888] *** ERROR => Operation failed: SfEInternalError: JNI class init failed
[sfxxmain.cpp 1171]
F
F ********************************************************************************
F *** ERROR =>
F ***
F *** Please see section 'Java VM shared library issues'
F *** in SAP Note 1316652 for additional information and trouble shooting advice.
F ********************************************************************************
F
F [Thr 888] *** LOG => exiting (exitcode -21001, retcode 2).
PLZ help me.

Tecra A2 does not start Windows

My Tecra A2 has suddenly stop starting windows.
I get the "We apologize for the inconvenience....." screen that says Windows had to shut down unexpectedly and asked to choose how I want to start (Safe Boot, Las known settings, Normally etc)
When I choose any of these the Win XP Start screen comes up for a while, then the PC restarts and the "We apologise for the inconvenience....."screen comes up again.
Any ideas how to fix/troubleshoot this??

> I do not have a MS WIN XP disc so I tried the Toshiba Recovery Disc. I could not find CHKDSK on the CD but it did do some kind of recovery process. Is this the same thing?
The repair console is available ONLY on original MS Win XP disk and not on the recovery disk.
> Any further suggestions? Is there any way of checking the hardware? I think this may be a HDD problem, but it would be nice to get confirmation
I agree with you it could be a HDD issue
You could check the HDD using a tool called Drive Fitness Test.
Check this page
http://www.hitachigst.com/hdd/support/download.htm

GoldenGate Manager Does not start - Windows 7 64-bit, 11gR1 database

Hi Experts,
I ran into very tricky situation and seeking for clarification and if possible solution for the same, here how it goes: (This is a practice setup for my knowledge and not production)
My environement:
GGSCI (msheth-work) 18> versions
Operating System:
Version 6.1 (Build 7601: Service Pack 1)
Database:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
I have two database installed called gg1, gg2 on the same local system.
I have two goldengate installation at following location: C:\gg1 , C:\gg2
I was successfully able to start Manager, Extract and Replicate process with out creating windows services for manager.
I read in discussion forum that it is recommneded to have different manager name and create services for them if you have multiple Goldengate installation in the same system. (Oracle Golden Gate installation
Now when I create services using INSTALL ADDSERVICE ADDEVENTS, manager process does not start and manager report log and event viewer from windows shows following error despite of providing correct login details in manager parameter file:
2012-08-23 10:42:31 ERROR OGG-00664 Oracle GoldenGate Manager for Oracle, mgr.prm: OCI Error beginning session (status = 1017-ORA-01017: invalid username/password; logon denied).
GGSCI (hostname) 19> DBLOGIN USERID ggs_owner, PASSWORD ggs_owner
Successfully logged into database.
Manager Parameter File:
PORT 7810
USERID ggs_owner, PASSWORD ggs_owner
PURGEOLDEXTRACTS C:\gg2\dirdat\ex, USECHECKPOINTS
Your explaination and help will be highly appreciated.
Regards,
Mitul Sheth
Edited by: 954634 on Aug 23, 2012 11:46 AM

Thanks all of you to responding to my post, although I have bad news that I tried everything but it did not work. let me show you what all I have done:
1) Adding windows services for manager
GGSCI (msheth-work) 4> edit params ./globals
MGRSERVNAME MGR1
GGSCI (msheth-work) 5> exit
c:\gg1>install addservice addevents
Oracle GoldenGate messages installed successfully.
Service 'MGR1' created.
Install program terminated normally.
When I try to start manager service either from GGSCI or from services.msc it gives same login error as mentioned earlier in the post.
2) Using tnsnames while login into database:
GGSCI (msheth-work) 1> edit params mgr
PORT 7809
USERID ggs_owner@gg1, PASSWORD ggs_owner
PURGEOLDEXTRACTS C:\gg1\dirdat\ex, USECHECKPOINTS
Just to make sure username and password is fine I login into database using GGSCI command prompt as follows:
GGSCI (msheth-work) 4> dblogin userid ggs_owner@gg1, password ggs_owner
Successfully logged into database.
Hence, after making sure on all your suggestion I could not get it started and still situation is the same. I would need manager login into database becuase I have implemented DDL replication.
Also, just by removing manager service from windows, same configuration without any change works like a charm. It just that for evey goldengate process a new window is create and it can't be closed. (If closed process dies).

Lightroom cc does not start windows 8.1

updated lightroom cc (6) on windows 8.1. Now lightroom does not start. nothing happens when I open it???

Hi,
After installing lightroom CC you need to log out from the Creative Cloud and once again Sign in.
Do this by:
Preferences>Account>Log out from the Creative Cloud.
Let me know if worked.

FMS does not start (windows 7)

FMS does not start in win 7.
There were some starts but only when first run after the installation. (i checked it 3 times) After the computer reboot, FMS does not start. Whats the problemm ? And one more quastion: where can i find server address ?

Do you see the FMS and FMSAdmin services running in your machine?
Is your concern that FMS does not start by itself after restarting your machine? Or your were not able to start FMS.
To connect to your server using Administration Console, Enter your server name or IP in "Server Address' text box.
Regards,
Janaki L

SAProuter does not start, Windows Server 2008 64

I cannot get SAProuter to start on a Windows Server 2008 64-bit server. I used the following version of SAProuter:
SAPROUTER 7.10 - Windows Server on x64 64bit
- I was able to add the service correctly using the following command:
ntscmgr install saprouter -b <drive>:\usr\sap\saprouter\saprouter.exe -p "service -S <port> -r"
- I configured the service to logon as the <system number>adm account.
When I try to start the service I receive the following error:
The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more detail.
When I check the Application event log I see the following error:
Activation context generation failed for "f:\usr\sap\saprouter\saprouter.exe". Dependent Assembly Microsoft.VC80.CRT,processorArchitecture="amd64",publicKeyToken="1fc8b3b9a1e18e3b",type="win32",version="8.0.50727.4053" could not be found. Please use sxstrace.exe for detailed diagnosis.
What is the issue?
Edited by: Jeff Kinard on Jul 14, 2010 1:21 AM

Hi,
Wrong forum I reckon!
Anyway probably you need to check out SAP Note 1375494, most likely that you need to apply the the MS patch mentioned in the note & the attached PDF
Regards
Chris

HP Pavilion 15-n253sv Notebook Computer does not start (Windows 8)

Hello, yesterday my laptop shut down and since then it cannot start.
Even with repair/install disks of windows (8.1) or Linux, it recognises the disk, gets to the first menu (of the Linux disk) or the press any key to boot from cd/dvd (on windows disk) but then it get to a blank screen and does nothing else.
I run the System tests (quick and extensive) and both found (pretty quickly I might add) an error on the HDD (I think).
the error Id istrk03-74j79q-mfpv6j-60wc03 but I cannot find any reference of that on the web.
I suppose that since it is a hardware issue I will have to take it to HP support, the main thing that concerns me (as you might have already guested) is if I might lose any files.
Thank you in advance
Orestes

Yes, I just took it to a service support and they told me just that, if I want to keep my files I would have to pay extra.
The live cd solution was my first thought too but (as I wrote at my original post) it doesn't seem to be hopeful either.
It gets to the first stage of the disks (boot menu of linux live disk/press any key to boot from disk on the windows disk) and then it gets to blank screen doing nothing as well, also the optical drive stopped reading the disk (that is how I figure that's doing nothing). :-(
Anyway thank you for your good will but I suppose I would have to pay for the recovery if I do not want to void my warranty.
PS:By the way and since you mentioned it, the issue with the bootable disks can it be connected with the hard disk failure?

Wbengine error not started windows 2008 server

I have an error when i launch a backup with this command wbadmin start systemstatebackup -backuptarget:h:.
Nom du journal :Application
Source :       Application Error
Date :         10/01/2014 11:55:00
ID de l'événement :1000
Catégorie de la tâche :(100)
Niveau :       Erreur
Mots clés :    Classique
Utilisateur : N/A
Ordinateur :   srv-logiciel.raimu.local
Description :
Application défaillante wbengine.exe, version 6.0.6002.18005, horodatage 0x49e023c7, module défaillant wbengine.exe, version 6.0.6002.18005, horodatage 0x49e023c7, code d’exception 0xc0000005, décalage d’erreur 0x00000000000362ba, ID du processus 0x19cc,
heure de début de l’application 0x01cf0df1b1726c06.
XML de l’événement :
<Event xmlns="
<System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-01-10T10:55:00.000Z" />
    <EventRecordID>5496897</EventRecordID>
    <Channel>Application</Channel>
    <Computer>srv-logiciel.raimu.local</Computer>
    <Security />
</System>
<EventData>
    <Data>wbengine.exe</Data>
    <Data>6.0.6002.18005</Data>
    <Data>49e023c7</Data>
    <Data>wbengine.exe</Data>
    <Data>6.0.6002.18005</Data>
    <Data>49e023c7</Data>
    <Data>c0000005</Data>
    <Data>00000000000362ba</Data>
    <Data>19cc</Data>
    <Data>01cf0df1b1726c06</Data>
</EventData>
</Event>
Result of vssadmin list writers
vssadmin 1.1 - Outil ligne de commande d'administration du service
de cliché instantané de volume
(C) Copyright 2001-2005 Microsoft Corp.
Nom du rédacteur : 'ASR Writer'
   ID du rédacteur : {be000cbe-11fe-4426-9c58-531aa6355fc4}
   ID de l'instance du rédacteur : {3f47a346-a58f-4dfc-bae3-d609f3ac27b2}
   État : [1] Écurie
   Dernière erreur : Aucune erreur
Nom du rédacteur : 'System Writer'
   ID du rédacteur : {e8132975-6f93-4464-a53e-1050253ae220}
   ID de l'instance du rédacteur : {978d43f5-b096-4567-aed2-2a024eac9c7d}
   État : [1] Écurie
   Dernière erreur : Aucune erreur
Nom du rédacteur : 'WMI Writer'
   ID du rédacteur : {a6ad56c2-b509-4e6c-bb19-49d8f43532f0}
   ID de l'instance du rédacteur : {abd4b941-489d-4709-91da-3f4f3ed72b66}
   État : [1] Écurie
   Dernière erreur : Aucune erreur
Nom du rédacteur : 'Shadow Copy Optimization Writer'
   ID du rédacteur : {4dc3bdd4-ab48-4d07-adb0-3bee2926fd7f}
   ID de l'instance du rédacteur : {eb44e074-6fdc-446a-ac5e-65b69163f30c}
   État : [1] Écurie
   Dernière erreur : Aucune erreur
Nom du rédacteur : 'Registry Writer'
   ID du rédacteur : {afbab4a2-367d-4d15-a586-71dbb18f8485}
   ID de l'instance du rédacteur : {fd72df2e-e98f-4895-8973-2a2fced4ec59}
   État : [1] Écurie
   Dernière erreur : Aucune erreur
Nom du rédacteur : 'COM+ REGDB Writer'
   ID du rédacteur : {542da469-d3e1-473c-9f4f-7847f01fc64f}
   ID de l'instance du rédacteur : {088d0edf-ee27-490d-a1df-6d6410309d7e}
   État : [1] Écurie
   Dernière erreur : Aucune erreur
Nom du rédacteur : 'Dhcp Jet Writer'
   ID du rédacteur : {be9ac81e-3619-421f-920f-4c6fea9e93ad}
   ID de l'instance du rédacteur : {98503db9-91f3-4926-8858-663eea6a961d}
   État : [1] Écurie
   Dernière erreur : Aucune erreur
Nom du rédacteur : 'IIS Config Writer'
   ID du rédacteur : {2a40fd15-dfca-4aa8-a654-1f8c654603f6}
   ID de l'instance du rédacteur : {e86af11c-3c01-4169-b755-41e1617b43f8}
   État : [1] Écurie
   Dernière erreur : Aucune erreur
Nom du rédacteur : 'BITS Writer'
   ID du rédacteur : {4969d978-be47-48b0-b100-f328f07ac1e0}
   ID de l'instance du rédacteur : {248646da-e186-4b44-b5a9-d3d4709b7ed2}
   État : [1] Écurie
   Dernière erreur : Aucune erreur
PS: I search in the forum and I don't found any solution.
Could you help me, please?

Hi,
The issue may be caused by the backup catalog, please try to delete the backup catalog to see if the issue still exists.
For more detailed information, please refer to the thread below:
Wbadmin.msc on windows server 2012 fails to start in MMC with error wbengine.exe 0xc000005
http://social.technet.microsoft.com/Forums/windowsserver/en-US/6f6c7b05-892f-4cf1-bfbe-f5e4ae748414/wbadminmsc-on-windows-server-2012-fails-to-start-in-mmc-with-error-wbengineexe-0xc000005?forum=windowsbackup
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Foxfire will not start. windows 7 home premium

After downloading and installing FoxFire, and pinning the icon to the taskbar, it will not open when it is selected. I can double-click the icon on the desktop, in the taskbar, or under the start button, all that happens is the spinning circle appears with the mouse pointer for a few seconds, then disappears. The program does not open, nor does it appear in the task manager list of running applications. If it won't open, I can't use it, rendering it useless.

hello BobLewis, as such a problem can sometimes be caused by malware that is active on the system, i'd recommend to run a scan with different security tools like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes], [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner] & [http://www.kaspersky.com/security-scan kaspersky security scan].

Not Starting - Windows xp

Similar Messages

Maybe you are looking for