Not suggesting words as you type?

All of a sudden when I am texting on my phone it is not suggestiig the words as I type.... Like the suggestion option is off or something. HELP ... it is taking me FOREVER to send a 2 sentence text !!!!

If you're composing an email can you hit the menu button and choose Enable Suretype. See if that fixes the problem
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

Similar Messages

Predictive text not suggesting words - similar to ...

I've moved from a Moto phone with iTap predicitve text that used to suggest a word when 'typing' so that you didn't have to type in the whole word, particularly useful with long words.
My Nokia 3120 doesn't do-that S60v3 I believe.
Is there a setting in the phone to set it?
Is there a software fix?
Any ideas?
Thanks in advance.
Matt

No. The system used so far on S60 phones does not suggest words like it does on Moto or S-E phones. That's not to say that it won't happen in future, but it's more likely to be seen on new models rather than as updates of existing models.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

The system doesn't recognize or capitalize the word (I) or the first word of every sentence. Another really annoying thing about the integrated mail on your Mac computers is the fact that the system learns the word as you type it more and more instead of

The system doesn’t recognize or capitalize the word (I) or the first word of every sentence. Another really annoying thing about the integrated mail on your Mac computers is the fact that the system learns the word as you type it more and more instead of highlighting it as incorrectly is this is a word that’s being misspelled. Can Apple fix this bug to make it user friendly as if you were using Office or a Word Document?

You hit the target CT.
It’s only fair that if Apple is going to integrate Mail into Mac PCs, it would be nice if the system does it for you like Office or perhaps Outlook. I just don’t to use Outlook although I have it installed and ready to use, but instead use Mail which comes with Mac OS already.
I hope to make some sense here.

In Facebook only(not in Word) , when I type a message the mouse cannot be right clicked

There are 4 accounts in our home computer. I upgraded to FF3.6.13. Two of the 4 accounts worked perfectly. The third account wouldn't connect to FF (said something abt PROXY settings but I was able to correct this thru your forum). The 4th account belongs to my cranky husband who is on Facebook all the time. He has spelling and grammar issues so he right-clicks the mouse all the time. Plus he need to upload pictures. Help!!! I used System Restore to get back to the earlier version of FF... but lost all internet connection so I installed FF again..

Thanks! I found this:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
I can't find this, however: User/Library/Containers/com.apple.iPhoto.
Do I need to delete both to make this fix work? Obviously, I have no idea what they do. >:-)

The type or namespace name 'SPSite' could not be found (are you missing a using directive or an assembly reference?)_

I am creating a Winforms application. I need to upload and download a file from Sharepoint.
I have added reference to Microsoft.Sharepoint.Client.
Below is the code to upload file:
using System.IO;
using Microsoft.SharePoint;
private void Button_Click_1(object sender, RoutedEventArgs e)
String fileToUpload = @"C:\Test.txt";
String sharePointSite = "https://myshapoint";
String documentLibraryName = "Test";
using (SPSite oSite = new SPSite(sharePointSite))
using (SPWeb oWeb = oSite.OpenWeb())
if (!System.IO.File.Exists(fileToUpload))
throw new FileNotFoundException("File not found.", fileToUpload);
SPFolder myLibrary = oWeb.Folders[documentLibraryName];
// Prepare to upload
Boolean replaceExistingFiles = true;
String fileName = System.IO.Path.GetFileName(fileToUpload);
FileStream fileStream = File.OpenRead(fileToUpload);
// Upload document
SPFile spfile = myLibrary.Files.Add(fileName, fileStream, replaceExistingFiles);
// Commit
myLibrary.Update();
But i get the error "The type or namespace name 'SPSite' could not be found (are you missing a using directive or an assembly reference?)"
I am not sure what else I am supposed to do here.

Hi,
If you want to develop a WinForm application to be only used in SharePoint Server, we can use Server-Side Object Model(use Microsoft.Sharepoint.dll) to achieve it.
If you want to use the WinForm application to be used both in Server side and Client Side, I suggest you use .Net Client Object Model(use Microsoft.Sharepoint.Client.dll) to achieve it.
Here are two links for your reference:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/c357e3c7-37e9-4ded-83aa-a57beae0b0e4/how-to-upload-download-files-to-sharepoint-2013?forum=sharepointdevelopment
http://msdn.microsoft.com/en-us/library/ff798388.aspx
Best Regards
Dennis Guo
TechNet Community Support

HT1212 my phone touch system has been destroyed i have to make a backup in laptop but when i m connecting ma device to itunes of ma laptop so its saying your device have a paascode like ma phone touch system is not working how should i type ma pass word ?

my phone touch system has been destroyed i have to make a backup in laptop but when i m connecting ma device to itunes of ma laptop so its saying your device have a paascode like ma phone touch system is not working how should i type ma pass word ??? is there any way to open ma device from laptop nd sync my data , contacts etc to ma laptop ... i have to make my phone repair then...please help with thiss...

Sorry No, if your screen is broken, then you won't be able to unlock your phone.
You do backup your phone on a regular basis right?

The type or namespace name 'IBM' could not be found (are you missing a using directive or an assembly reference?)

please help on below error
Compilation Error
Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately.
Compiler Error Message: CS0246: The type or namespace name 'IBM' could not be found (are you missing a using directive or an assembly reference?)
Source Error:
Line 27: using System.Web.Services;
Line 28: using System.Net;
Line 29: using IBM.WMQ;
Line 30: using System.DirectoryServices.AccountManagement;
Source File: c:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\TEMPLATE\LAYOUTS\NBO\LogComplaint.aspx.cs
Line: 29

Hello,
>>using IBM.WMQ
It seems you are using third party dll namespace reference in your project but that dll is not being added in project. Please get the IBM.WMQ dll and add it first in your current visual studio project by right click on project-->add reference.
You can place this dll in GAC or can directly add to project as suggested by jaydeep.
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

Hi there, I changed my passcode but forgot it and ive tried to back my phone up but i need to type in my old passcode! any suggestions? thank you very much

hi there, I im 13 years of age and i recently changed my passcode but forgot it and ive tried to back my phone up and i dont really want to restore it without backing it up and i need to type in my old passcodeto back it up ! any suggestions? thank you very much appreciate your help

If you've never synced while this passcode was enabled, you will not be able to backup now without first entering the passcode. bbfc's post is incorrect.
You will have to force the phone into recovery mode & restore it, as described here:
http://support.apple.com/kb/ht1212
If you don't have an existing backup to restore to your phone, then you will lose all of your data, as your only option will be to restore as new to remove the passcode.

Why GWt suggest box is not working in the latest versions of Firefox ? It was working only in Firefox 3 and not other versions. could you please assist in this regards.,

Why GWt suggest box is not working in the latest versions of Firefox ?
It was working only in Firefox 3 and not other versions. could you please assist in this regards.,

jbren wrote:
I repeatedly have problems with playback on my STB's. Go thru all the motions, inhouse agent, fix multi room dvr problems. Unplug unit, unplug dvr, etc. etc. etc. The DVR'd show will play on the DVR but not on the STB's. What's up with that?
Sorry to hear the auto fix suggested early did not fix your problem. So we can get more information from you, I have copied your post to our private support board. Please refer all correspondences to there from here on out. You can easily get to the private support one of two ways. In the email you signed up for the forums with, you will receive a link to click on. Make sure you are already signed into the forums before clicking on this link. Another way of getting there is by clicking on your username anywhere you see it in the forums. This brings you to your account profile. Scroll down to the section labeled "My Support Cases" . In there you will see the link to your case.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

I can not get into the iTunes store for the past two days. I can do a search on the music in upper right corner. However, the screen is white with "iTunes" in the middle when I do. Any suggestions? Thank you.

I can not get into the iTunes store for the past two days. I can do a search on the music in upper right corner and get a drop down list. However, the screen is then white with "iTunes" in the middle. Any suggestions? Thank you.

Check out this Apple article -> iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
If your computer has one of the LSPs listed you may have to reset winsock.
If not, you may want to give this article a shot -> iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues

I unchecked "Check spelling as you type" but Firefox still underlines words in cut-and-pasted text in some web apps. How can I stop it from doing this?

I'm using an online web mapping application that has input boxes for descriptive text and stuff like that. Sometimes I copy blocks of text from a word processing app into these input boxes because I can format the text in the wp. When I paste the text blocks, Firefox does the wiggly red underline on words it doesn't know. I've already turned off "check spelling as you type" but this doesn't make a difference. I don't want Firefox to check spelling on these text blocks that I copy and paste. Sometimes I need to capture screen images of these text blocks in the mapping application and I want them to look clean. Thanks.

Does "Check Spelling" in the right-click context menu has a tick when this happens?
You can consider to disable the spell check underline by setting the ui.SpellCheckerUnderlineStyle pref to 0 (zero) on the <b>about:config</b> page.
*http://kb.mozillazine.org/ui.SpellCheckerUnderlineStyle

I just downloaded a few ITunes Apps to my PC using windows 8 and they will not work. Suggestions? Thank you.

I just downloaded a few ITunes Apps to my PC using windows 8 and they will not work. Suggestions? Thank you.

The apps can only be run on an iOS device. They will not run on your PC.

The type or namespace name 'SQLite' could not be found (are you missing a using directive or an assembly reference?)

Trying to get sql server compact up and running. I connected to a sqlite database and atuo generated the model.cs code.
however, I get the following error.
Error 1 The type or namespace name 'SQLite' could not be found (are you missing a using directive or an assembly reference?) C:\Users\kenny\Documents\Visual Studio 2013\Projects\WindowsFormsApplication2\WindowsFormsApplication1\Model.cs
3
Any help is greatly appreciated. Please provide some detail as I am novice.
Thanks

Ok so I got the past that problem. I had to add the package System.Data.SQLite Core in Manage NuGet.
Then I changed the auto-generated code "using SQLite" to "using System.Data.SQLite".
But now I have a new problem, it says "System.Data.SQLite.SQLiteConnection' does not contain a definition for 'CreateTable' "
Here is the code
//This code was generated by a tool.
//Changes to this file will be lost if the code is regenerated.
//using SQLite;
using System;
using System.Data.SQLite;
using System.Data.SQLite.EF6;
namespace WindowsFormsApplication2
public class SQLiteDb
string _path;
public SQLiteDb(string path)
_path = path;
public void Create()
using (SQLiteConnection db = new SQLiteConnection(_path))
db.CreateTable<servers>();
public partial class servers
public Int64 server_name { get; set; }
public Double cpu_usage { get; set; }
Any ideas why CreateTable is not available?

CProjects - DMS integration:26 036 You are not authorized for with doc.type

Hi Experts,
I need to use cProjects integration with DMS. When I try to create a link to an existing document I find the following error:
26 036 You are not authorized for with document type DRW
My user has authorization to the doc type in the DMS system (linked by RFC to cProjects system). I also have defined the object link in the document type.
Do you know which configuration may be missing?
Thanks in advance!
Neil

Hi Niel,
How is the RFC connection established between DMS and cProjects system? Do check the authorizations of the RFC user through which the connection is established.
Regards,
Vivek Pandey

HT201401 Sleep/Wake button is not working. Do you have any suggestions how can I fix this?

Hi, I bought an iPhone5 in Sydney on 17 Sep 2012 (through Apple online store-Weborder no. W425361396) while I was studying there. Now I already went back to my home country (Thailand). And I got a problem with my iPhone5. The Sleep/Wake button is not working. Do you have any suggestions how can I fix this?
Looking forward to hear from you.
Best regards,
Apiradee

You will have to return the iPhone to Australia .The iPhone warranty is not international .
Warranty and service is only provided in Country of original sale
You could try a reset followed if required by a restore initially with backup and then again if required as new
If that makes no difference it will be a hardware issue and you will have to return it to Australia

Not suggesting words as you type?

Similar Messages

Maybe you are looking for