Not Support this type of CPU: 0f33

Hi. After I flashed the BIOS to version 2, I get this error message "Not support this type of CPU: 0f33". I can't get to a floppy drive or CMOS to recover the flash.
Has anyone else encountered this and if so, how did you get around it to recover?
Thx
MikeC

MB MSI 848P Neo
1 GB RAM
Intel 2.8 CPU
120 MB Hard Drive
Found this article and tried it. But still cannot get to anything. Have a bootable floppy with the old bios version but cannot get to the floppy to boot it. The MB just hangs on the screen display "Not support this typs of CPU:0F33". Any help would be great.
Thx
Rename the desired AMI BIOS file to AMIBOOT.ROM and save it on a floppy disk. e.g. Rename A569MS23.ROM to AMIBOOT.ROM
Insert this floppy disk in the floppy drive. Turn On the system and press and hold Ctrl-Home to force update. It will read the AMIBOOT.ROM file and recover the BIOS from the A drive.
When 4 beeps are heard you may remove the floppy disk and restart the computer.

Similar Messages

"...does not support this type of alias."

I just reinstalled the OS 10.4 onto my G5 using the erase and install function. The drive is formatted as a Mac OS Extended (Journaled), which is an HFS+ format. I'm trying to copy some files onto the main hard drive from a DVD. I keep getting an error message that says "[the file name] cannot be copied to the destination, perhaps because the destination does not support this type of alias." I researched the message and the only thing I could find was that the error appears if the destination disk is formatted as a UFS disk. I thought maybe I made a mistake when I reinstalled the OS, so I tried to copy the same files to the secondary internal drive and to an external Firewire drive, and I got the same message both times.
What should I be looking for so that this will work? I'm going to post in a couple other topics, but any help would be greatly appreciated.
Thank you in advance,
Lloyd

Barry,
I was trying to make back-up copies of my Adobe CS2 disks by copying the disks to the hard drive then burning them to CDs, but I got the error message when I dragged the contents from the original CD to the HD.
This worked, but it took a while: I Stuffed each CD to the HD, then unStuffed them and used Toast to burn a new CD. A few steps longer, but at least it worked.
Now, if I could only figure out why the second internal drive does not have the "Ignore Permissions" check box available, I'd be all set.
Thanks,
Lloyd

Error Message "Sorry this player doesnt not support this type of audio file"

i keep getting this error message when trying to listen to music. They are MP3 files. It works properly after I reboot the device. what gives?

I can confirm that the same happened to me.

Error : software component version does not support this object type.

Hi ,
We are getting error as software component version does not support this object type when we try to create Business Object in PI 7.1 ESR .
How can we solve this error.
Regards,
Syed
Edited by: Umar Syed on Jun 11, 2009 12:01 PM

Hi Srinivas,
We are working on Modelling in SAP PI, but we are unable to create any Business Object.. is there any specific steps need to be followed.
Once we login to our ESR from index page we have this option to choose
Available Profiles :         Process Definition
                                   Service Definition
                                   Unregistered.
We are getting the option of new types (_Business Object_) only if we select Unregistered Profile and not in other Profiles . Is there some settings need to be done.
Regards,
Syed

Is it possible to run Labview ver 6.5 with PowerPC as the target CPU and VxWorks as the target operating system? If version 6.5 does not support this configuration, do any of the later versions support it?

Is it possible to run Labview ver 6.5 with PowerPC as the target CPU and VxWorks as the target operating system?
If version 6.5 does not support this configuration, do any of the later versions support it?
I have an Ada executable that's creating a buffer of data that's being fed to a Labview executable that's displaying the data in a GUI. We're re-architecting some legacy system hardware and I'm just trying to figure out if this configuration is even possible.
Thanks

Hi,
I never heard of LabVIEW6.5. I only know of LV6i, LV6.1 and LV7.0...
Why don't you just call your next/regional NI sales rep?
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Is it possible to run Labview ver 6.5 with PowerPC as the target CPU and VxWorks as the target operating system? If Labview ver 6.5 does not support this configuration, do any of the later versions support it?

Is it possible to run Labview version 6.5 with PowerPC as the target CPU and VxWorks as the target operating system?
If version 6.5 does not support this configuration, do any of the later versions support it?
I basically have an Ada executable and Labview executable that currently run on a Sun Machine with Solaris as the operating system. I'm re-architecting the system hardware and will be getting rid of the Sun Machine and Solaris. I'm don't have any issues with the Ada executable, but I'm not sure what configurations Labview supports.

duplicate post
In the future, please don't try to stuff your message in the subject line. Thanks.

SAML Credential Mapper does not support credential type

Has anybody any idea on what could be causing the message below, which is being logged several times?
<[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <1309285937475> <BEA-000000> <SAMLCredentialMapperV2: getCredentials(Subject): getCredentialInternal() called>
<[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <1309285937475> <BEA-000000> <SAMLCredentialMapperV2: getCredentialInternal(): **SAML Credential Mapper does not support credential type: weblogic.UserPassword, returns null**>
Best regards
Update: Forgot to mention this is SOA Suite 11G environment
Edited by: user9501748 on Jun 28, 2011 11:53 AM

I've got the same issue too.
My setup is to have one domain acting as both Source and Destination.
For every 10 seconds, I'm seeing 4 of these logs, and the CPU consumption is 100% consistently.
####<2-Jun-2009 11:00:27 o'clock AM EDT> <Debug> <SecuritySAMLCredMap> <MYHOST> <AdminServer> <[ACTIVE] ExecuteThread: '18' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1243954827839> <BEA-000000> <SAMLCredentialMapperV2: getCredentials: Subject initiator>
####<2-Jun-2009 11:00:27 o'clock AM EDT> <Debug> <SecuritySAMLCredMap> <MYHOST> <AdminServer> <[ACTIVE] ExecuteThread: '18' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1243954827839> <BEA-000000> <SAMLCredentialMapperV2: getCredentials(Subject): getCredentialInternal() called>
####<2-Jun-2009 11:00:27 o'clock AM EDT> <Debug> <SecuritySAMLCredMap> <MYHOST> <AdminServer> <[ACTIVE] ExecuteThread: '18' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1243954827839> <BEA-000000> <SAMLCredentialMapperV2: getCredentialInternal(): SAML Credential Mapper does not support credential type: weblogic.UserPassword, returns null>
Does anyone know what's happening? I've got one of the Security Provider = Active Directory, and thus there's no password returning. Could it be the root cause of the problem?

[unixODBC][Driver Manager]Driver does not support this function {IM001}

Hello,
I start from the end and details show below - this error message i got in sql session:
SQL> select count(*) from EnergyType@ENERGOPLAN;
select count(*) from EnergyType@ENERGOPLAN
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[unixODBC][Driver Manager]Driver does not support this function {IM001}
ORA-02063: preceding 2 lines from ENERGOPLAN
SQL>
First question - is Oracle Heterogeneous Services are licensed for standard edition ? I cant find this information, and my database - is SE 11.2.0.3.0 - 64bit.
If its ok and HS are licensed for SE, then please see details of my problem:
----OS and packages version
[oracle@aris_sv_db log]$ uname -a
Linux aris_sv_db 2.6.18-308.24.1.el5 #1 SMP Tue Dec 4 17:43:34 EST 2012 x86_64 x86_64 x86_64 GNU/Linux
[oracle@aris_sv_db log]$
[oracle@aris_sv_db log]$ rpm -qa | grep odbc
[oracle@aris_sv_db log]$ rpm -qa | grep unixodbc
[oracle@aris_sv_db log]$ rpm -qa | grep unixODBC
unixODBC-libs-2.2.11-10.el5
unixODBC-libs-2.2.11-10.el5
unixODBC-devel-2.2.11-10.el5
unixODBC-2.2.11-10.el5
unixODBC-devel-2.2.11-10.el5
[oracle@aris_sv_db log]$ rpm -qa | grep freetds
freetds-0.91-1.el5.rf
[oracle@aris_sv_db log]$
-----ODBC.INI, ODBCINST.INI and FREETDS.CONF
[oracle@aris_sv_db log]$ more /home/oracle/.odbc.ini
[ENERGOPLAN]
Driver = FreeTDS
Servername = ENERGOPLAN
Database = ess2
[oracle@aris_sv_db log]$
[oracle@aris_sv_db log]$ more /etc/odbcinst.ini
# Example driver definitions
[FreeTDS]
Description = MSSQL Driver
Driver = /usr/lib64/libtdsodbc.so.0
#Setup = /usr/lib64/libtdsodbc.so.0
#Driver = /usr/lib64/libodbc.so
#Driver = /usr/lib/libodbc.so
UsageCount = 1
Trace = Yes
TraceFile = /tmp/freetds.log
[ODBC]
DEBUG = 1
TraceFile = /tmp/sqltrace.log
Trace = Yes
[oracle@aris_sv_db log]$
[oracle@aris_sv_db log]$ more /etc/freetds.conf
# A typical Microsoft server
[ENERGOPLAN]
host = 192.168.10.64
port = 1433
tds version = 8.0
# client charset = UTF-8
client charset = cp1251
[oracle@aris_sv_db log]$
----CHECK CONNECT from ODBC
[oracle@aris_sv_db log]$ isql -v ENERGOPLAN user pass
| Connected! |
| |
| sql-statement |
| help [tablename] |
| quit |
| |
SQL> select count(*) from EnergyType;
| |
| 8 |
SQLRowCount returns 1
1 rows fetched
SQL> [oracle@aris_sv_db log]$ tsql -S ENERGOPLAN -U user -P pass
locale is "en_US.UTF-8"
locale charset is "UTF-8"
using default charset "cp1251"
1> select count(*) from EnergyType;
2> go
8
(1 row affected)
1> [oracle@aris_sv_db log]$
----LISTENER.ORA, TNSNAMES and initENERGOPLAN.ora
[oracle@aris_sv_db log]$ more /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
# listener.ora Network Configuration File: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
SID_LIST_ENERGOPLAN =
(SID_LIST =
(SID_DESC=
(SID_NAME=ENERGOPLAN)
(ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1)
(PROGRAM=dg4odbc)
(ENVS="LD_LIBRARY_PATH=/usr/lib64:/u01/app/oracle/product/11.2.0/dbhome_1/lib")
ENERGOPLAN =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = PNPKEY))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.10.72)(PORT = 1523))
ADR_BASE_LISTENER = /u01/app/oracle
[oracle@aris_sv_db log]$ more /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora
# tnsnames.ora Network Configuration File: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
ENERGOPLAN =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.72)(PORT=1523))
(CONNECT_DATA=(SID=ENERGOPLAN))
(HS=OK)
[oracle@aris_sv_db log]$ more /u01/app/oracle/product/11.2.0/dbhome_1/hs/admin/initENERGOPLAN.ora
# This is a sample agent init file that contains the HS parameters that are
# needed for the Database Gateway for ODBC
# HS init parameters
HS_FDS_CONNECT_INFO = ENERGOPLAN
#HS_FDS_CONNECT_INFO = 192.168.0.199:1433//test
HS_FDS_TRACE_LEVEL = DEBUG
#HS_FDS_TRACE_FILE_NAME = /tmp/hs1.log
HS_FDS_TRACE_FILE_NAME = /u01/app/oracle/product/11.2.0/dbhome_1/hs/log/mytrace.log
HS_FDS_SHAREABLE_NAME = /usr/lib64/libodbc.so #/usr/lib64/libtdsodbc.so.0
#HS_FDS_SHAREABLE_NAME = /usr/lib64/libtdsodbc.so.0
#HS_FDS_SHAREABLE_NAME = /usr/lib/libodbc.so
#HS_LANGUAGE=american_america.we8iso8859p1
#HS_LANGUAGE=AMERICAN_AMERICA.AL32UTF8
#HS_LANGUAGE=AMERICAN_AMERICA.CL8MSWIN1251
#HS_LANGUAGE=RUSSIAN_RUSSIA.UTF8
#HS_LANGUAGE=Russian_CIS.AL32UTF-8
#HS_FDS_FETCH_ROWS=1
HS_NLS_NCHAR = UCS2
HS_FDS_SQLLEN_INTERPRETATION=32
# ODBC specific environment variables
set ODBCINI=/home/oracle/.odbc.ini
set ODBCINSTINI=/etc/odbcinst.ini
#HS_KEEP_REMOTE_COLUMN_SIZE=ALL
#HS_NLS_LENGTH_SEMANTICS=CHAR
#HS_FDS_SUPPORT_STATISTICS=FALSE
# Environment variables required for the non-Oracle system
#set <envvar>=<value>
[oracle@aris_sv_db log]$
[oracle@aris_sv_db log]$ tnsping ENERGOPLAN
TNS Ping Utility for Linux: Version 11.2.0.3.0 - Production on 01-APR-2013 16:27:49
Copyright (c) 1997, 2011, Oracle. All rights reserved.
Used parameter files:
/u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.72)(PORT=1523)) (CONNECT_DATA=(SID=ENERGOPLAN)) (HS=OK))
OK (0 msec)
[oracle@aris_sv_db log]$
----CREATE DBLINK and test from sqlplus
CREATE DATABASE LINK "ENERGOPLAN" CONNECT TO "user" IDENTIFIED BY "pass" USING 'ENERGOPLAN';
[oracle@aris_sv_db log]$ sqlplus / as sysdba
SQL*Plus: Release 11.2.0.3.0 Production on Mon Apr 1 16:30:14 2013
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Release 11.2.0.3.0 - 64bit Production
SQL> select count(*) from EnergyType@ENERGOPLAN;
select count(*) from EnergyType@ENERGOPLAN
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[unixODBC][Driver Manager]Driver does not support this function {IM001}
ORA-02063: preceding 2 lines from ENERGOPLAN
SQL>
----logs from hs and odbc
[oracle@aris_sv_db log]$ tail -50 ENERGOPLAN_agt_12117.trc
12 VARCHAR N 100 100 0/ 0 1000 0 200 ConsumptionYearCostUOM
3 DECIMAL N 24 24 9/ 3 0 0 0 ConsumptionYearFactorAmount
-7 BIT N 1 1 0/ 0 0 0 20 NeedToBeApprovedByREK
Exiting hgodtab, rc=0 at 2013/04/01-16:30:42
Entered hgodafr, cursor id 0 at 2013/04/01-16:30:42
Free hoada @ 0x14e5fd20
Exiting hgodafr, rc=0 at 2013/04/01-16:30:42
Entered hgopars, cursor id 1 at 2013/04/01-16:30:42
type:0
SQL text from hgopars, id=1, len=36 ...
00: 53454C45 43542043 4F554E54 282A2920 [SELECT COUNT(*) ]
10: 46524F4D 2022454E 45524759 54595045 [FROM "ENERGYTYPE]
20: 22204131 [" A1]
Exiting hgopars, rc=0 at 2013/04/01-16:30:42
Entered hgoopen, cursor id 1 at 2013/04/01-16:30:42
hgoopen, line 87: NO hoada to print
Deferred open until first fetch.
Exiting hgoopen, rc=0 at 2013/04/01-16:30:42
Entered hgodscr, cursor id 1 at 2013/04/01-16:30:42
Allocate hoada @ 0x14e5fd80
Entered hgodscr_process_sellist_description at 2013/04/01-16:30:42
Entered hgopcda at 2013/04/01-16:30:42
Column:1(): dtype:4 (INTEGER), prc/scl:10/0, nullbl:1, octet:0, sign:1, radix:0
Exiting hgopcda, rc=0 at 2013/04/01-16:30:42
Entered hgopoer at 2013/04/01-16:30:42
hgopoer, line 231: got native error 0 and sqlstate IM001; message follows...
[unixODBC][Driver Manager]Driver does not support this function {IM001}
Exiting hgopoer, rc=0 at 2013/04/01-16:30:42
hgodscr, line 407: calling SQLSetStmtAttr got sqlstate IM001
Free hoada @ 0x14e5fd80
hgodscr, line 464: NO hoada to print
Exiting hgodscr, rc=28500 at 2013/04/01-16:30:42 with error ptr FILE:hgodscr.c LINE:407 FUNCTION:hgodscr() ID:Set array fetch size
Entered hgoclse, cursor id 1 at 2013/04/01-16:31:24
Exiting hgoclse, rc=0 at 2013/04/01-16:31:24
Entered hgocomm at 2013/04/01-16:31:24
keepinfo:0, tflag:1
00: 4F52434C 2E343535 32623466 342E362E [ORCL.4552b4f4.6.]
10: 32322E37 363237 [22.7627]
tbid (len 20) is ...
00: 4F52434C 5B362E32 322E3736 32375D5B [ORCL[6.22.7627][]
10: 312E345D [1.4]]
cmt(0):
Entered hgocpctx at 2013/04/01-16:31:24
Exiting hgocpctx, rc=0 at 2013/04/01-16:31:24
Exiting hgocomm, rc=0 at 2013/04/01-16:31:24
Entered hgolgof at 2013/04/01-16:31:24
tflag:1
Exiting hgolgof, rc=0 at 2013/04/01-16:31:24
Entered hgoexit at 2013/04/01-16:31:24
Exiting hgoexit, rc=0
[oracle@aris_sv_db log]$
[oracle@aris_sv_db log]$ tail -50 /tmp/sqltrace.log
Native = 0x7fff6ca974f4
Message Text = 0x14e5f968
Buffer Length = 510
Text Len Ptr = 0x7fff6ca97750
[ODBC][12117][SQLGetDiagRecW.c][582]
Exit:[SQL_SUCCESS]
SQLState = IM001
Native = 0x7fff6ca974f4 -> 0
Message Text = [[unixODBC][Driver Manager]Driver does not support this function]
[ODBC][12117][SQLGetDiagRecW.c][540]
Entry:
Statement = 0x14e399f0
Rec Number = 2
SQLState = 0x7fff6ca97700
Native = 0x7fff6ca974f4
Message Text = 0x14e5f908
Buffer Length = 510
Text Len Ptr = 0x7fff6ca97750
[ODBC][12117][SQLGetDiagRecW.c][582]
Exit:[SQL_NO_DATA]
[ODBC][12117][SQLEndTran.c][315]
Entry:
Connection = 0x14dbd4b0
Completion Type = 0
[ODBC][12117][SQLGetInfo.c][214]
Entry:
Connection = 0x14dbd4b0
Info Type = SQL_CURSOR_COMMIT_BEHAVIOR (23)
Info Value = 0x7fff6ca9781e
Buffer Length = 8
StrLen = 0x7fff6ca9781c
[ODBC][12117][SQLGetInfo.c][528]
Exit:[SQL_SUCCESS]
[ODBC][12117][SQLEndTran.c][488]
Exit:[SQL_SUCCESS]
[ODBC][12117][SQLDisconnect.c][204]
Entry:
Connection = 0x14dbd4b0
[ODBC][12117][SQLDisconnect.c][341]
Exit:[SQL_SUCCESS]
[ODBC][12117][SQLFreeHandle.c][268]
Entry:
Handle Type = 2
Input Handle = 0x14dbd4b0
[ODBC][12117][SQLFreeHandle.c][317]
Exit:[SQL_SUCCESS]
[ODBC][12117][SQLFreeHandle.c][203]
Entry:
Handle Type = 1
Input Handle = 0x14dbb0c0
[oracle@aris_sv_db log]$

To see which ODBC function DG4ODBC is looking for and unixODBC isn't supporting it would be best to get an ODBC trace file. But as your unixODBC driver (unixODBC-2.2.11-10.el5) is outdated and these old drivers had a lot of issues when being used on 64bit operating systems (for example wrong sizeofint etc). So best would be to update the unixODBC Driver manager to release 2.3.x. More details can be found on the web site: www.unicodbc.org
- Klaus

Adobe Reader could not open a pdf file - either not supported file type or file damaged

On March 5th, I started getting the Adobe Reader error message "Adobe Reader could not open a pdf file because it is either not supported file type or the file has been damaged.
I get this when I try to open the pdf file as an attachment in Outlook 2013 from my G-Mail account. If I save the attachment and then try to open the pdf document, I get the same error4.
I get this error message with every pdf file that now comes to me in Outlook.
If I log on to my G-Mail I am able to open the pdf document. If I also save the attachment to my computer, I do not get the error message when I open the pdf file. This would suggest the file is okay
This would lead me to believe the problem maybe with Outlook.
I'm using Adobe Reader XI v11.0.10
I'm using Windows 8.1
Is anyone encountering this same issue with outlook?

I copied it again. Do you see it? BTW, how do I set privacy? (I'm new at this)
I opened with two different notepads and got different information.here it is from Windows Notepad. First few lines are:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd
>
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<style type="text/css">td img {display: block;}</style>
</head>
Here it is from MS Notepad:
<HTML><HEAD><style>.ending {font-family: Calibri; font-size: 18px;}</style><BODY><TABLE><TR><TD colspan=100%><a href="http://www.trulynolen.com/questionnaire?l=14115468&o=141050070&z=85087-7515"><img src=http://newsletter.tnolen.com/email/service.png border=no></a></TD></TR><TR><TD align=center class="ending">If you would not like to receive email communication from Truly Nolen in the future, please <a href="http://newsletter.tnolen.com/unsubstart.asp?b=14115468&z=85087-7515&e=[email protected]/unsubstart.asp?b=14115468&z=85087-7515&e=[email protected]">click here</a></TD></TR></TABLE></BODY></HTML>

Recently upgraded to a Canon Mark 3 and now having issues with my RAW files in Bridge and Photoshop. I am operating with CS4. Photoshop produces an error " Could not complete your request because photoshop does not recognize this type of file"

Recently upgraded to a Canon Mark 3 and now having issues with my RAW files in Bridge and Photoshop. I have operating with CS4. Photoshop produces and error " Could not complete your request because photoshop does not recognize this type of file"

Assuming you mean 5D Mark III, Photoshop CS4 cannot directly open raw files from your camera.
Generally speaking, Adobe stopped updating older versions to be able to read raw files from newer cameras when they released a new major version of Photoshop. Photoshop CS4 is no longer receiving Camera Raw updates.
You can double check this yourself:
First you need to determine whether Adobe has released support for your new camera in your version of Photoshop. To do that, look at these two pages. You'll want to find out the earliest version of Camera Raw that can support your camera, then what version of Photoshop can run that version of Camera Raw.
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
If you find your camera is supported by your version of Photoshop, you need to download the latest update for Camera Raw. There's more information on how to do that here:
Keeping Photoshop Up-To-Date
If your version of Photoshop cannot support your camera, you can download and install the latest version of the free Adobe DNG Converter, which can take your raw files as input and put out DNG format files, which your version of Photoshop can open.
Photoshop Help | Digital Negative (DNG)
The DNG converter DOES work, but if you want maximal quality from your raw files (not to mention the convenience and ease of use of directly opening your raw files) you'll want the latest version of Photoshop. Adobe has made substantial improvements in raw conversion quality in recent years.
-Noel

CS3 Could not complete your request because Photoshop does not recognize this type of file.

CS3 Could not complete your request because Photoshop does not recognize this type of file.   Also, all the jpg images I have open in preview only. The only thing I did different about the time these things changed, was upgrading to 10.6 on my mac. Hopefully I can fix this with your help! I really appreciate it in advance.
steeleart

This is the boilerplate text often used in connection to saving to a network (please NOTE the part where it explains that normally, it does work, but that it is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe):
If you are opening files over a network or saving them to a network server, please cease and desist immediately in the event you are currently experiencing problems with one or more files. Working across a network is not supported.
See:
http://kb2.adobe.com/cps/406/kb406793.html
Copy the CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
     Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work.   It should.
    Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.
When problems arise, a lot of valuable work can be lost.

"Exchange organisation does not support this version of Exchange server"

I am facing the error "Exchange Organisation does not support this version of exchange server" at time of installation of exchange server 2007 in the Windows server 2008 Enterprise edition.
I have already installed exchange Server 2010 in the that domain.
The following the image that show the error that i am facing
I have the checked current Active Directory or Exchange Server schema version by using
Using that i got the following information
"dsquery * cn=schema,cn=configuration,dc=india,dc=local -scope base -attr objectVersion"
objectVersion = Windows Server 2008 RTM
CN=ms-Exch-Schema-Version-Pt,cn=schema,cn=configuration,dc=india,dc=local -scope base -attr rangeUpper"
rangeUpper = 14726 ( Exchange server 2010 sp1)
I am attaching the Exchange server setup logs here
[5/31/2013 3:04:28 PM] [0] **********************************************
[5/31/2013 3:04:28 PM] [0] Starting Microsoft Exchange 2007 Setup
[5/31/2013 3:04:28 PM] [0] **********************************************
[5/31/2013 3:04:28 PM] [0] Operating System version: Microsoft Windows NT 6.1.7600.0.
[5/31/2013 3:04:28 PM] [0] Setup version: 8.1.240.6.
[5/31/2013 3:04:28 PM] [0] Logged on user: INDIA\administrator.
[5/31/2013 3:04:28 PM] [0] Command Line Parameter Name='mode', Value='Install'.
[5/31/2013 3:04:28 PM] [0] Command Line Parameter Name='sourcedir', Value='C:\Exchange2007'.
[5/31/2013 3:04:28 PM] [0] Command Line Parameter Name='fromsetup', Value=''.
[5/31/2013 3:04:28 PM] [0] ExSetupUI was started with the following command: '-mode:install -sourcedir:C:\Exchange2007 /FromSetup'.
[5/31/2013 3:04:29 PM] [0] Setup is choosing the domain controller to use
[5/31/2013 3:04:29 PM] [0] Setup is choosing a local domain controller...
[5/31/2013 3:04:31 PM] [0] Setup has chosen the local domain controller NewDelhi.india.local for initial queries
[5/31/2013 3:04:31 PM] [0] PrepareAD has either not been run or has not replicated to the domain controller used by Setup. Setup will attempt to use the Schema Master domain controller NewDelhi.india.local
[5/31/2013 3:04:31 PM] [0] The schema master domain controller is available
[5/31/2013 3:04:31 PM] [0] The schema master domain controller is in the local domain; setup will use NewDelhi.india.local
[5/31/2013 3:04:31 PM] [0] Setup is choosing a global catalog...
[5/31/2013 3:04:31 PM] [0] Setup has chosen the global catalog server NewDelhi.india.local.
[5/31/2013 3:04:31 PM] [0] Setup will use the domain controller 'NewDelhi.india.local'.
[5/31/2013 3:04:31 PM] [0] Setup will use the global catalog 'NewDelhi.india.local'.
[5/31/2013 3:04:31 PM] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=india,DC=local'.
[5/31/2013 3:04:31 PM] [0] No Exchange organization container was found for the organization. Message: 'Could not find the Organization Container.'.
[5/31/2013 3:04:31 PM] [0] Setup will search for an Exchange Server object for the local machine with name 'PONDY'.
[5/31/2013 3:04:31 PM] [0] No Exchange Server with identity 'PONDY' was found.
[5/31/2013 3:04:31 PM] [0] The following roles are unpacked:
[5/31/2013 3:04:31 PM] [0] The following roles are installed:
[5/31/2013 3:04:31 PM] [0] The local server does not have any Exchange files installed.
[5/31/2013 3:04:31 PM] [0] Setup will use the path 'C:\Exchange2007' for installing Exchange.
[5/31/2013 3:04:31 PM] [0] The server is cluster type: 'None'.
[5/31/2013 3:04:31 PM] [0] The requested cluster type: 'None'.
[5/31/2013 3:04:31 PM] [0] The installation mode is set to: 'Install'.
[5/31/2013 3:04:31 PM] [0] Exchange organization name is required for this mode.
[5/31/2013 3:04:31 PM] [0] Active Directory Initialization status : 'True'.
[5/31/2013 3:04:31 PM] [0] Schema Update Required Status : 'False'.
[5/31/2013 3:04:31 PM] [0] Organization Configuration Update Required Status : 'True'.
[5/31/2013 3:04:31 PM] [0] Domain Configuration Update Required Status : 'False'.
[5/31/2013 3:04:32 PM] [0] Applying default role selection state
[5/31/2013 3:04:32 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:32 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:32 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:32 PM] [0] InstallModeDataHandler has 4 DataHandlers
[5/31/2013 3:04:32 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:32 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:32 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:32 PM] [0] InstallModeDataHandler has 5 DataHandlers
[5/31/2013 3:04:32 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:32 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:32 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:32 PM] [0] InstallModeDataHandler has 6 DataHandlers
[5/31/2013 3:04:32 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:32 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:32 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:32 PM] [0] InstallModeDataHandler has 6 DataHandlers
[5/31/2013 3:04:32 PM] [0] RootDataHandler has 1 DataHandlers
[5/31/2013 3:04:44 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:44 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:44 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:44 PM] [0] InstallModeDataHandler has 5 DataHandlers
[5/31/2013 3:04:44 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:44 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:44 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:44 PM] [0] InstallModeDataHandler has 4 DataHandlers
[5/31/2013 3:04:44 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:44 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:44 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:44 PM] [0] InstallModeDataHandler has 1 DataHandlers
[5/31/2013 3:04:46 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:46 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:46 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:46 PM] [0] InstallModeDataHandler has 4 DataHandlers
[5/31/2013 3:04:48 PM] [0] Validating options for the 0 requested roles
[5/31/2013 3:04:48 PM] [0] Validating options for the 0 requested roles
[5/31/2013 3:04:53 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:53 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:53 PM] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
[5/31/2013 3:04:53 PM] [0] **************
[5/31/2013 3:04:53 PM] [0] Setup will run the task 'test-setuphealth'
[5/31/2013 3:04:53 PM] [1] Setup launched task 'test-setuphealth -DomainController 'NewDelhi.india.local' -DownloadConfigurationUpdates $true -ExchangeVersion '8.1.240.6' -Roles 'Global' -ScanType
'PrecheckInstall' -SetupRoles 'Global' -PrepareOrganization $true'
[5/31/2013 3:04:53 PM] [1] Beginning processing.
[5/31/2013 3:05:24 PM] [1] [ERROR] The Exchange organization does not support this version of Exchange Server.
[5/31/2013 3:05:24 PM] [1] Ending processing.
[5/31/2013 3:05:24 PM] [0] **************
[5/31/2013 3:05:24 PM] [0] Setup will run the task 'test-setuphealth'
[5/31/2013 3:05:24 PM] [1] Setup launched task 'test-setuphealth -DomainController 'NewDelhi.india.local' -DownloadConfigurationUpdates $false -ExchangeVersion '8.1.240.6' -Roles 'Mailbox' -ScanType 'PrecheckInstall' -SetupRoles 'AdminTools','Mailbox' -CreatePublicDB
$true -TargetDir 'C:\Program Files\Microsoft\Exchange Server' -IISInstalled $true'
[5/31/2013 3:05:24 PM] [1] Beginning processing.
[5/31/2013 3:05:27 PM] [1] [ERROR] The Exchange organization does not support this version of Exchange Server.
[5/31/2013 3:05:27 PM] [1] Ending processing.
[5/31/2013 3:05:40 PM] [0] End of Setup
[5/31/2013 3:05:40 PM] [0] **********************************************
Please suggest me how to install the exchange server 2007 SP1 on the domain that has exchange server 2010 sp1
Thanks

dear amit can u tell me I have one doming sg.com .I used for lab first I install in exchange server 2013 is normaly install and working fine .then I format my pc and agine install exchange 2010
Exchange organisation does not support this version of Exchange server
warning
setup is going to perepare the organization for exchange 2010 by using setup/ prepare AD . no exchange 2007 server roles have been deteted in this topology .
please can u tell me the how install exchange 2010
thanks

DataSource does not support requested type

hi,
i have a question about BI bean.
i use 9iDS 2 JDeveloper to create a JSP with BI beans.when i run this page,error message show in console window.like this:
Log : Current DataSource does not support requested type: DataMap.DATA_FORMATTED : oracle.dss.thin.beans.crosstab.CrosstabModelAdapter : setSupportedDataLayerFlags ()
Log : Current DataSource does not support requested type: DataMap.DATA_RATIO : oracle.dss.thin.beans.crosstab.CrosstabModelAdapter : setSupportedDataLayerFlags ()
Log : Current DataSource does not support requested type: DataMap.DATA_VIEWFORMAT : oracle.dss.thin.beans.crosstab.CrosstabModelAdapter : setSupportedDataLayerFlags ()
Log : Current DataSource does not support requested type: DataMap.DATA_VIEWSTYLE : oracle.dss.thin.beans.crosstab.CrosstabModelAdapter : setSupportedDataLayerFlags ()
what's this? my server is 9.0.1.3,olap patch 9.0.1.2 .
Thanks

Hi,
I have the same error occurring also. It happens when I try to drill down to a lower level within my BI BEANS application. As I am using a JSP to hold my BI BEANS this occurs on either a Bar Graph click or a Crosstab expension. I have both the Crosstab and the Graph linked.
07/10/02 13:03 ftvApp: PROBLEM: In oracle.dss.thin.beans.crosstab.CrosstabModelAdapter::setSupportedDataLayerFlags () - Current DataSource does not support requested type: MetadataMap.METADATA_VIEWSTYLE
07/10/02 13:03 ftvApp: PROBLEM: In oracle.dss.thin.beans.crosstab.CrosstabModelAdapter::setSupportedDataLayerFlags () - Current DataSource does not support requested type: DataMap.DATA_FORMATTED
07/10/02 13:03 ftvApp: PROBLEM: In oracle.dss.thin.beans.crosstab.CrosstabModelAdapter::setSupportedDataLayerFlags () - Current DataSource does not support requested type: DataMap.DATA_RATIO
07/10/02 13:03 ftvApp: PROBLEM: In oracle.dss.thin.beans.crosstab.CrosstabModelAdapter::setSupportedDataLayerFlags () - Current DataSource does not support requested type: DataMap.DATA_VIEWFORMAT
07/10/02 13:03 ftvApp: PROBLEM: In oracle.dss.thin.beans.crosstab.CrosstabModelAdapter::setSupportedDataLayerFlags () - Current DataSource does not support requested type: DataMap.DATA_VIEWSTYLE
07/10/02 13:03 ftvApp: PROBLEM: In oracle.dss.thin.beans.crosstab.CrosstabModelAdapter::setSupportedDataLayerFlags () - Current DataSource does not support requested type: MetadataMap.METADATA_VIEWSTYLE
Regards,
Scott.

TF10121: The path '' is not found or not supported. Type or select a different path. After SQL2012 install and Solution upgraded to VS2010

I have recently upgraded a solution from vs2008 to vs2010. This solution happens to contain several .rptproj file (SSRS 2008R2 reports). I was able to upgrade the solution after I installed SQL2012 (which installed the necessary templates
into vs2010).
However whenever I open the solution the Output window now pops up and continuously lists the same error (shows output from Source Control - Team Foundation).
TF10121: The path '' is not found or not supported. Type or select a different path.
I have tried reinstalling Team Explorer SP1, and VS2010 SP1, but with no change.
If I unbind the solution from source control the messages go away. Rebind and they return.
The problem doesn't always start straight away, it may take a few solution explorer clicks.
Opening an rdl into the editor seems to halt the messages, until I go back to clicking in solution explorer (similarly the issue doesn't always re-occur first click).
E.g.
TF10121: The path '' is not found or not supported. Type or select a different path.
TF10121: The path '' is not found or not supported. Type or select a different path.
Audit.rdl has been automatically checked out for editing.
Then no errors until going back and clicking in solution explorer (which is using auto hide)
[See also:
http://social.msdn.microsoft.com/Forums/en-US/tfsversioncontrol/thread/8c7cc472-3ac1-4800-8199-5f4b41414748]
Does anyone else out there share this problem or more importantly a solution/work around?

Hi Evanw21,
Based on the current information, it seems to be the known issue described in the following KB article:
FIX: TF10121 error when you right-click a project file of the project or a folder in the project in Visual Studio 2010
The root cause of the problem is that we hold onto a stale reference to the old project and get back an empty string when we try to get its directory path. To resolve this problem, contact Microsoft Customer Support Services to obtain the hotfix. For a complete
list of Microsoft Customer Support Services telephone numbers and information about support costs, visit the following Microsoft website:
http://support.microsoft.com/contactus/?ws=support
Besides, there is one easy workaround. If we close the solution and re-open it prior to attempting to re-add the project, we should be able to add it successfully.
References:
TF10121
Hope this helps.
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

Error: Driver does not support this function

Hi there people!
I'm a newbie in jsp and I encountered this error: Driver does not support this function. I'm using odbc:jdbc and access. Can someone please tell me what is wrong?
<%@ page import = "java.sql.*" %>
<%@ page import="java.io.*" %>
<%@ page import="java.util.*" %>
<HTML>
<title>Stock Portfolio</title>
<body>
<body bgcolor="gray"><center>
<table border = 1>
<tr>
     <td><th>Symbol</td></th>
     <td><th>Type of Transaction</td></th>
     <td><th>Date</td></th>
     <td><th>Shares</td></th>
     <td><th>Price</td></th>
     <td><th>Stock Commission</td></th>
     <td><th>Stock Brocker Name</td></th>
<tr>
<%     String symbol = request.getParameter("symbol");
       String type = request.getParameter("type");
       String date = request.getParameter("date");
        String shares = request.getParameter("shares");
        int ishares = Integer.parseInt(shares);
        String price = request.getParameter("price");
        float fprice = Float.parseFloat(price);
        String commission = request.getParameter("commission");
        float fcommission = Float.parseFloat(commission);
        String bname = request.getParameter("bname");
%>
<% String url ="jdbc:odbc:Product";
   try
   { Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
     Connection con = DriverManager.getConnection(url,"","");
     String query = "INSERT INTO Stock (dbsymbol,dbtype,dbdate,dbshares,dbprice,dbcommission,dbname) VALUES (?,?,?,?,?,?,?)";
      PreparedStatement pstmt = con.prepareStatement(query);
      pstmt.setString(1,symbol);
       pstmt.setString(2,type);
       pstmt.setString(3,date);
       pstmt.setInt(4,ishares);
       pstmt.setDouble(5,fprice);
       pstmt.setDouble(6,fcommission);
       pstmt.setString(7,bname);
       pstmt.executeUpdate(query);
      }catch (Exception e)
       {System.out.println(e.getMessage());
%>
</body>
</html>      Thanks!

Sorry I need to hurry up. But here is link i found relating same problem. Please check this and see if it might help you.
[http://forum.java.sun.com/thread.jspa?threadID=564872&messageID=2784526|http://forum.java.sun.com/thread.jspa?threadID=564872&messageID=2784526]
Read reply #5.
It says
You're getting this exception because you're using the executeUpdate() method that returns a ResultSet. That's a JDBC 3.0 function, and the JDBC-ODBC bridge only supports JDBC 1.0.Good Luck.

Not Support this type of CPU: 0f33

Similar Messages

Maybe you are looking for