Not supprted resolution 1440x900 for 19" screen on Satellite A110-178

Hello.
My Toshiba A110-178 (with chipset Mobile Intel 945GM Express) does not support Widescreen 19" resolution 1440?900.
How i cant adjus this resolution.
Thanks Ben
Message was edited by: Kuleshov

Hello Ben
Check please this topic http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=19677
Maybe you will be able to use 1440 x 900 resolution following described method.
Please give us some feedback!

Similar Messages

Spot Heling Brush Tool & Save for Web screen

Spot Heling Brush Tool
While using Wcom Grip Pen I can’t switch brush size option to any other than Pen Pressure – it’s not good.
Save for Web screen
It would be good to have “Apply” button for size changing, like it w3as in CS3 (I didn’t use older versions).

You don't use pixel preview and possibly also do not work at 72dpi, do you? That's why your crop lands on sub-pixel values and is quantised to the next whole pixel, changing the effective output dimensions. Aside from that, why bother with artboards? You could just use the slice tool and save it all in one go...
Mylenium

Satellite A110 - WiFi switch is not working with new WiFi card

Hello Everyone
I have a problem with my Toshiba Notebook Satellite A110-178 (PSAB0E). I replaced the original WIFI card Intel 3945abg with Intel Link 5100 and on the new wifi card wifi hardware switch is not working.
New wifi card is discovered and drivers working correct but when I try to scan for wifi networks with IntelPro/Wireless software I have message to turn on hardware switch but it's turn on and not work. On old wifi card swich is working correct - orange light is on. On new card light is off and swich is not working.
Please help

Hi
Maybe you could enable the Wlan card using different way;
Go to device manager -> WLan card properties -> Advanced tab
There you could check if there is a option which would enables the WLan.
Its worth a try
Otherwise its a compatibility issue like suggested by PinkPanther
I read in different threads that this could happens if there is a different pin assignment on miniPCI WLan card and this could not match with the miniPCI slot on the mobo...

I'm searching AC-adapter for Satellite A110

I would like to purchess a AC-adapter for my notebook (Satellite A110-178). Where can I find it?

And? Did you find it??
No?
The Satellite A110-178 uses Ac Adaptor PA3467E-1AC3 65W 19V 3.42A
If you want you can visit the Toshiba Options & Accessories site and you will find the same AC adaptor.
Try to search for this part number and Im sure you will find several offers and online shops which provide this part.

Creating an app for different screen resolutions/sizes

Hi
I'm currently in the process of learning application development for the iPhone and could do with some help on how to cater for retina and non-retina screens. I want to create image assets for each screen type.
What the best way to go about detecting if the user has an iPhone 4 for example and selecting the appropriate images for that resolution? I understand that you attach '2x' to file names when coding natively but for a pure Actionscript project where the assets might be contained in a swc file what would be best to do?
Thanks

Hi Vic,
The biggest advantage of building apps in Flash CS5.5 or Flex is the ability to target multiple devices and the 2 major platforms, iOS and Android oh and also Blackberry (anyone?).
Best way to approach a build is to assume you do not know the screen size your app will be used on, since Android is so all over the place.
I have been using stage.stageHeight and stage.stageWidth religiously for all my scaling although I have heard that method has its problems, it has worked well for me, I have put out 2 apps personally and 3-4 for work using this method both in Landscape and Portrait orientations and this method has worked well.
The easiest way to build a multi screen app is to design it for an average ratio, 3:4 being the lowest = iPad so lets say you pick some decent size that wont be too big for smaller screens like the iPhone 3gs 480x320 and wont be too low for high res screens like the new Google Nexus or the Motorola Xoom 1280x800. I usually target the iPhone 4 screen 960x640 right now it seems to fall in the middle between older phones and tablets.
The real quick and dirty way of doing it is to build all your assets inside a movie clip and then scale that movie clip proportionally to the stage, first checking to make sure none of it would be cut off due to different screen ratios, this is not the best way of doing it but it works well and its the easiest method.
A better way is to scale and place your content in relation to the stage, again the stage.stageWidth and Height properties are your friends so if you have an element that always goes in the middle you would place it my_mc.x = stage.stageHeight / 2 and same with the y, you can also scale it to the stage my_mc.width = stage.stageWidth/4 this way the movie clip is always 1/4th of the stage width regardless of the screen, its a lot planning up front but this method allows you to cover the entire screen instead of just cramming your movie clip in there however it fits.
Let me know if any of that helped I can go into further detail but I feel like I am rambling on.

Enable High Resolution for Retina Screen

Version 11.0.0 downloaded from Creative Cloud on iMac 5K Retina screen (Yosemite). Acrobat Pro opens in Low Resolution - all text.images appears blurred/bitmapped/low resolution.
On looking at the applications info: 'Open in low resolution' is ticked and dimmed, so it can't be changed.
I've seen a couple of hacks to fix this, one of which states you should go into the Contents/info.plist and add <key>NSHighResolutionCapable</key>
<string>True</string> just before </dict>
I'm not keen to do this, plus sounds like it will be glitchy.
Please would the next update allow high resolution for Retina screens. Thanks.

Big thanks Adobe, a day later, you release 11.0.09 which has fixed this issue.

Optimizing captivate file for different screen resolution

Hi,
I've a problem in optmizing the captivate file for different screens like laptop,netbook and pc. In PC's and laptops, this is not a major issue as the size of the screen is large. But when we play the captivate generated swf file in a netbook, the whole website gets resized to fit in to the resolution of the screen except the captivate file.Captivate file gets truncated in such a way that, the user can read only half of the slide.
Thanks in advance
Parvathy

One thing you can try is adjusting the swf dimensions manually. I haven't found a way to do it in Cp. We had a similar problem with some eLearning we built that all our testers used just fine. But once someone undocked their laptop and was off their desktop monitor, had the same problem you describe, where the bottom of the movie was cut off.
Once you publish the files, open the .htm file with notepad or your text/html editor of choice.
Look for a line that looks something like this:
var so = new SWFObject(strURLFile + strURLParams, "Captivate", "1100", "798", "10", "#CCCCCC");
or
var so = new SWFObject("filename.swf", "Captivate", "1600", "1200", "10", "#CCCCCC");
Change those numbers in quotes to 100%, like this:
var so = new SWFObject("filename.swf", "Captivate", "100%", "100%", "10", "#CCCCCC");
save the .htm
My experience has been it will adjust the swf so it fits either the height or width of the display, whichever is shorter. That is, it will either fill the top to bottom OR side to side, but keep the swf in proportion.
hope that helps.

TS1814 Most of the songs on my iPod Classic no longer dshow up on iTunes on my laptop. I deleted iTunes & installed the latest version but this did not change anything. For example on 1 playlist I have 66 songs but only 1 shows on the iTunes screen. Th

Most of the songs on my iPod Classic no longer show up on iTunes on my laptop. I deleted iTunes & installed the latest version but this did not change anything. For example on 1 playlist I have 66 songs but only 1 shows on the iTunes screen. Thanks you for any help.

See Empty/corrupt iTunes library after upgrade/crash or
Recover your iTunes library from your iPod or iOS device.
tt2

Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

Reboot the machine holding Command and r keys down, you'll boot into Lion Recovery Partition
In there will be Disk Utility, use that to select your Lion OS X Partition and Repair Permissions.
After that is done reboot the machine and see if you can log in.
If not repeat the above steps to get into Lion Recovery, get online and reinstall Lion again, it will overwrite the installed version and hopefully after that it wil work.
Reboot and try again.
If not follow my steps to create a Snow Leopard Data Recovery drive, then option boot from it and grab a copy of your files off the machine.
Then reinstall all your programs onto the external drive like setting up a new machine, then use Disk Utility to erase the entire internal boot drive (select the drive media on the far left, not the partiton slightly indented) format Option: GUID , 1 partition OS X Extended and then use Carbon Copy Cloner to clone the external to the newly formatted internal drive. Once that is finished reboot and disconnect the external drive.
Once you go that, boot into Snow Leopard and update to 10.6.8, use the AppStore and option click on Purchases and download Lion again and install.
Lots of work, but there is no Lion disks.
https://discussions.apple.com/message/16276201#16276201

YouTube will not work on safari for me on the ipad. Is there anyway to fix this? I can go anywhere else on the internet fine and it works on google chrome, but on safari it shows a blank screen with the bar on top after it loads.

YouTube will not work on safari for me on the ipad. Is there anyway to fix this? I can go anywhere else on the internet fine and it works on google chrome, but on safari it shows a blank screen with the bar on top after it loads, if it's even loading at all.
I do not know if it's relevant or not, but I got a message on my ipad while on safari saying that my iPhone has a virus. I looked it up and it seems it might have just been an ad from the website I was on, but it happened around the same time YouTube stopped working.

You will find that using the YouTube app will provide a better viewing experience for YouTube videos.

I had an accident with my ipod. i did not know that; nowadays, the warranty does not cover my ipod if the screen is cracked. but now the battery is not working. the warranty does help me for something??

i want help, not the same comments that i will not be helped. i admit my fault as the owner that i had the accident, but i believed that i was secured with my warranty. otherwise i would ha decided to do not have it if i was going to be the one paying to be fixed... how can i still trust Aplee Corp if the are not helping me with a devise that i paid the price that they decided giving me a warranty to be sure that i am secure while i use my devise. now i would like to know if i can have a refund of the warranty because i am looking for a different way to fix it because i have to pay and pay. but i paid for this situation and i had such assintance leaving me aside telling me that i am hopeless and also that i have to pay more and more.
ir does not work like that. i feel bad being treated like that.

angelferuz wrote:
nowdays, the warranty does not cover my iPod if the screen is cracked.
It never - ever has. The manufacturer's warranty covers you against faults due to manufacturing. (So if the screen did crack due to a manufacturing defect, Apple warranty would cover it, BUT - Apple would be aware and would be able to identify the cause of a cracked screen due to manufacturing defects, so ...)
Since you did not want comments telling you what you don't want to hear, you should condsider yourself lucky that you have any replies to this post. Sometimes, the truth hurts.

I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank. I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Y

I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank. I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Yosemite. Please help!

Check out this thread: Downloaded Lightroom CC but only get a quick flash of the startup screen then nothing, Lightroom 5 still working.

I just bought a Samsung S22B310B computer monitor and hooked up to my Mac Mini. I have my mac set to the 1920X1080 resolution but the entire screen (21.5") is not filled. It looks like non HD channels do on an HD TV. Used regular hook up not DVI.

Just bought Samsung S22B310B computer monitor and hooked it up to my mac mini. I have my mac set to the 1920X1080 resolution but the entire screen (21.5") is not filled. How do fill the screen? it fills the screen on other resolution settings. I have it hooked up regularly and not to the DVI hook up. I'm not a computer savvy person please help!

That monitor supports both (digital) DVI and (analog) VGA connections, so you should not need a converter or use a different adapter.
You should use the Apple Supplied HDMI to DVI Adapter and a (digital) DVI cable to the monitor.

How to create a variant for a screen (not a selection screen)

Hi
I foud a function module RS_CREATE_VARIANT.
Is this the correct fm for creating screen variant, if yes then pls provide me some help about how to pass values to this fm.
if not then pls help me to find out new one.
thnks
satisfactory answer will be definitely rewarded.
S@meer

passing values to RS_CREATE_VARIANT.
data : LS_VARIANTDESC TYPE VARID.
DATA : LT_VARIANTTEXT TYPE TABLE OF VARIT ,
         WA_VARIANTTEXT TYPE VARIT.
DATA : TT_REPORTPARAM TYPE TABLE OF RSPARAMS,
         WA_REPORTPARAM TYPE RSPARAMS.
CLEAR LS_VARIANTDESC.
          LS_VARIANTDESC-MANDT   = SY-MANDT.                " gr 46A
          LS_VARIANTDESC-REPORT = 'ZXXXXX'.
          LS_VARIANTDESC-VARIANT = 'VARIANT'.
          LS_VARIANTDESC-EDAT    = SY-DATUM.
          LS_VARIANTDESC-ETIME   = SY-UZEIT.
          REFRESH LT_VARIANTTEXT.
          CLEAR WA_VARIANTTEXT.
          WA_VARIANTTEXT-MANDT    = SY-MANDT.               " gr 46A
          WA_VARIANTTEXT-LANGU    = SY-LANGU.
          WA_VARIANTTEXT-REPORT   = 'ZXXXXXX'.
          WA_VARIANTTEXT-VARIANT = 'VARIANT'.
          APPEND WA_VARIANTTEXT TO LT_VARIANTTEXT.
       CALL FUNCTION 'RS_CREATE_VARIANT'
              EXPORTING
                CURR_REPORT               = 'ZXXXXX'
                CURR_VARIANT              = 'VARIANT'
                VARI_DESC                 = LS_VARIANTDESC
              TABLES
                VARI_CONTENTS             = TT_REPORTPARAM
                VARI_TEXT                 = LT_VARIANTTEXT
              EXCEPTIONS
                ILLEGAL_REPORT_OR_VARIANT = 1
                ILLEGAL_VARIANTNAME       = 2
                NOT_AUTHORIZED            = 3
                NOT_EXECUTED              = 4
                REPORT_NOT_EXISTENT       = 5
                REPORT_NOT_SUPPLIED       = 6
                VARIANT_EXISTS            = 7
                VARIANT_LOCKED            = 8
                OTHERS                    = 9.
            IF SY-SUBRC EQ 7.
If variant with same name already exists, change variant
              CALL FUNCTION 'RS_CHANGE_CREATED_VARIANT'
                EXPORTING
                  CURR_REPORT               = 'ZXXXXX'
                  CURR_VARIANT              = 'VARIANT'
                  VARI_DESC                 = LS_VARIANTDESC
                TABLES
                  VARI_CONTENTS             = TT_REPORTPARAM
                EXCEPTIONS
                  ILLEGAL_REPORT_OR_VARIANT = 1
                  ILLEGAL_VARIANTNAME       = 2
                  NOT_AUTHORIZED            = 3
                  NOT_EXECUTED              = 4
                  REPORT_NOT_EXISTENT       = 5
                  REPORT_NOT_SUPPLIED       = 6
                  VARIANT_DOESNT_EXIST      = 7
                  VARIANT_LOCKED            = 8
                  SELECTIONS_NO_MATCH       = 9
                  OTHERS                    = 10.
            ELSEIF SY-SUBRC NE 0.
            MESSAGE WITH 'Cannot create/change variant for'
            SY-UNAME.
            ENDIF.

I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen. How can I make the sound alert work?

I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen. How can I make the sound alert work?

I have had this same problem for weeks now with my 4S. I just got a new 5S after being extremely frustrated and the same thing - no sounds. After searching posts all over, I couldn't find a solution. I just told my friend of the issue and he asked "Do you have the Do Not Distrub on?" I didn't even know such a function existed. Upon looking that was exactly the issue.
To resolve, go to Settings> Do Not Disturb> Manual. If it is green, turn it off. You will now get phone calls and text alerts.
This functionality is also on your quick access utility menu (slide up menu). I assume this is how it was enabled on my phone.
I will post on other sites since I searched for weeks for this solution and didn't see it anywhere. Good luck!

Not supprted resolution 1440x900 for 19" screen on Satellite A110-178

Similar Messages

Maybe you are looking for