Not sure about international txting

Hello,
I have a friend in Australia I talk to a lot and I shied away from texting internationally as not to get charged. Now I knew I had unlimited texting, but wasn't sure about out of country and we texted each other a few times so I went to "Current Usage" to see if it did any damage. I scroll down to "Messaging" area and it says the following:
Nationwide TLK&TXT Share 700 (mom and I on same account)
Under that is a green bar and above it to the far right says, "0/Unlimited"
Under that it lists the "Usage Type" and under 'Text', it lists large numbers I knew were already safe, but going further across, it lists 'International Plan' and 'International Pix-Flix'. Both those last 2 categories have numbers, 4 sent, 11 received, 5 received flix.
Now my question is: Since it still reads 0/Unlimited above the green bar, does that mean it's safe to text and pix-flix internationally? Could have sworn a woman at Verizon told me they didn't have an international plan or something or other.

Grothka is close.
The price for sending International Text Messages will remain the same at $0.25 per message. The price for receiving International Text Messages will increase to $0.20 per message.

Similar Messages

Hi, i have a A1186 Mac Pro 2008 Tower. Im running windows 7 64Bit on it. Im not sure about what version of bootcamp should i use to get the drivers. Someone please help me.

Hi, i have a A1186 Mac Pro 2008 Tower. Im running windows 7 64Bit on it. Im not sure about what version of bootcamp should i use to get the drivers. Someone please help me.

Boot Camp support:
http://www.apple.com/support/bootcamp/
Boot Camp FAQ:
http://support.apple.com/kb/HT5639?viewlocale=en_US

Is the retina display for the new mac book pro worth the extra cost? I'm buying a new mac book pro but not sure about the retina display.

Is the retina display for the new mac book pro worth the extra cost? I'm buying a new mac book pro but not sure about the retina display.

There is a US$10 adapter from old power adapter to new MacBook Pro.
MagSafe to MagSafe 2 Converter
The MagSafe to MagSafe 2 Converter allows you to use the MagSafe connector on your LED Cinema Display, Thunderbolt Display, or MagSafe Power Adapter to charge your MagSafe 2-equipped Mac computer.
For battery life, check the latest Software Update for the fix for most problems.

I did not activate the backup email. and I'm not sure about the answer security. Please help me!

I created a id apple. then I forgot to activate the reserve by email. I still remember my secret question, but I'm not sure about i was using accented characters or spaces. language in my country. That was my fault. I want to ask the apple support can assist me? . I tried to find it on the website but I do not speak much english for a call request. Do you can send email to me reactivated by email backup or help me answer my security question . My ipad is now locked and can not be used. Please help me !

Find someone who speaks english to help you and contact Apple. Good luck.

I want my iPad to play over my car speakers I do not want a frequency transmitter device. Do I have any alternatives. I am not sure about adapters.

I want my iPad to play over my car speakers I do not want a frequency transmitter device. Do I have any alternatives. I am not sure about adapters.

I second what Thoma said. If there is the little headphone in, then you can buy a cord to plug the headphone out of your ipad into the input in your car.
Failing that, see if you can pair via blue tooth.
Or the fallback is an FM transmitter. I've used one of these for years. In fact, the one i use was meant to go with a MP3 player that broke years ago. They're very simple. the transmitter sends the music out of your ipad 'out' on a specified frequency (due to radio stations these transmitters often have many frequencies to choose from) you then tune y our radio to that specific frequency and you hear your ipad.
Occasionally, if you're driving cross country, you may need to tweak the frequency (if you get within range of an existing station using that same frequency) but they're very easy to use.
I often take motorpool cars, so I just carry with me the transmitter and a 1/8-1/8 cord and I'm set for any situation i find myself in

HT201328 My nephew give me the iphone and i'm not sure about the carrier. how i can get this information using the imei number?

My nephew give me the iphone and i'm not sure about the carrier. how i can get this information using the imei number?

If you have the iPhone in front of you, here's how you can learn the carrier:
Go to Settings > General > About and look at the "Network" row near the top. There's your carrier's name!

Moved database to new server, not sure about NT AUTHORITY\* users

I just moved database to new instance of SQL Server (SQL Server 2012 Web from Amazon EC2) and am now cleaning up database users.
I am not sure if/why these 2 users are needed (they exist in original database that someone else created and managed before me):
NT AUTHORITY\IUSR
NT AUTHORITY\NETWORK SERVICE
Note that there are also 2 database schemas with exactly the same names. These schemas do not contain any objects.
I am more clear on NT AUTHORITY\IUSR - this seems to be a user for IIS and IIS is not even installed on new instance (IIS will not be used). So this one probably can be deleted (together with matching schema?).
I am not sure about NT AUTHORITY\NETWORK SERVICE (or how it got created to begin with - new databases created on new server don't have it. Newly created databases don't have NT AUTHORITY\IUSR either).
Neither of these 2 users exist at server level on a new instance or on an old instance.

BOL says
Local System account. The name of this account is NT AUTHORITY\System. It is a powerful account that has unrestricted access to all local system resources. It is a member of the Windows Administrators group on the local computer, and is therefore a member of
the SQL Server sysadmin fixed server role
Network Service account. The name of this account is NT AUTHORITY\NetworkService. It is available in Microsoft Windows XP and Microsoft Windows Server 2003. All services that run under the Network Service account are authenticated to network resources as the
local computer.
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

HT204350 hi all i porches apple macbook air model mc-234 serial number W80031NH9A7 but it dont save the cahrge i dont know the reason is here any body to help me please i thing there will not be battery inside but im not sure about it

hi all i porches apple macbook air model mc-234 serial number W80031NH9A7 but it dont save the cahrge i dont know the reason is here any body to help me please i thing there will not be battery inside but im not sure about it

Being a 2009 model, it is likely the battery is worn out. Take it to a service center and have the battery replaced.

Still not sure about backing up, still not sure about backing up

Still not sure about backing up if apple provides a new i pad because battery has gone west. you must back your ipad info to something else, like your pc
as you cannot get to backed up material if you have sent it to apple, can you transfer that backup on ipad to the pc???

Not unless you're using the iCloud and you have a backup in iCloud and you're using a mac signed into iCloud or you have the iCloud control panel installed on your pc.
Or by chance you had a backup in iTunes.
If you can open iTunes you can check to see if your backup is there.
Click on Edit>go to Preferences> click on Devices, check for the device backups in the box. If they're not there, you can check to see if your information was in icloud by accessing it at www.icloud.com.

Cfquery qeustion, not sure about syntax

Hello;
Can someone tell me how to make this query work properly.
I need to make this query do 2 things in my where statement. one function is, any record with the number 2 in the categoryID field, is to be shown, I'm not sure how to write that. Here is my query:
<cfquery name="getMerch" datasource="#APPLICATION.dataSource#">
SELECT MerchName,MerchDescription, MerchPrice, MYFile, CategoryID
FROM Merchandise
WHERE merchID = #ATTRIBUTES.merchID# AND CategoryID = 2
</cfquery>
This part works fine: WHERE merchID = #ATTRIBUTES.merchID#
This part is wrong: AND CategoryID = 2
how would I write this? can anyone help?
thanks

I took it out, and this is what I get for an error:
The required parameter ATTRIBUTES.merchID was not provided.
This page uses the cfparam tag to declare the parameter ATTRIBUTES.merchID as required for this template. The parameter is not available. Ensure that you have passed or initialized the parameter correctly. To set a default value for the parameter, use the default attribute of the cfparam tag.
The error occurred in C:\Websites\187914kg3\magPaint\MerchDisplay.cfm: line 3
1 : 
2 : 
3 : <cfparam name="ATTRIBUTES.merchID" type="numeric">
4 :
I'm not sure how to get this out, I need it in my add to cart link, here is that code:
<cfset addLinkURL = "../store/StoreCart.cfm?addMerchID=#ATTRIBUTES.merchID#">
here is all the code for the custom tag:
<cfparam name="ATTRIBUTES.merchID" type="numeric">

<cfparam name="ATTRIBUTES.showAddLink" type="boolean" default="yes">

<cfquery name="getMerch" datasource="#APPLICATION.dataSource#">
SELECT MerchName,MerchDescription, MerchPrice, MYFile, CategoryID
FROM Merchandise
WHERE CategoryID = 2
</cfquery>
<cfif getMerch.recordcount neq 1>
<cfexit>
</cfif>

<cfset addLinkURL = "../store/StoreCart.cfm?addMerchID=#ATTRIBUTES.merchID#">

<cfoutput>
this is the output for the products, image, price, discription
</cfoutput>
and you have the code for the view page in my last post. This is the code I changes the CategoryID and the error, all posted.

Airport Exterme 802.11n Wi-Fi MC340LL/A not sure about some settings ?

Yesterday I bought a Airport Extreme ( Base Station ) 802.11n Wi-Fi MC340LL/A ( Model No. A1354 )
I have managed to figure out most of the setting in the Airport Utility ( Setup Guide that came with the Airport Extreme is No help with details about any settings except the Very Basic ones ) and My wireless network is setup and working but May need tweaking for even better performance.
But there are some settings/choices I'm not familiar with and Not quite sure what options I need and don't need.
My Network - No Network Disk Connected, Guest Network or Files being Shared
( at least not for now )
Connected through wireless access - ( WPA2 Personal Security )
MacBook 2.26GHz Intel Core 2 Duo (13-inch, Late 2009) –
Model A1342 Polycarbonate Unibody ( MC207LL/A )
OS X Snow Leopard 10.6.4
Roku digital streaming video player (also known as the Netflix Player by Roku)
HP Photosmart Plus B209a-m Wireless Printer
Connected Via Ethernet -
Dell OptiPlex Desktop PC
Windows XP Professional SP3
First Setting I'm not sure of - Internet Connection - Connection Sharing
For now I have it set to Share Public IP address - Is this correct for my Network Setup with The Airport Extreme being the only router being used ?
Other two choices are Distribute A Range of IP Addresses and ( Off ) Bridge Mode
[IMG]http://i134.photobucket.com/albums/q100/Blueimac/Screenshot2010-07-30at25653PM.j pg[/IMG]
Next Setting - Wireless - Wireless Network Options ( Very Confusing )
Settings I have Enabled
[IMG]http://i134.photobucket.com/albums/q100/Blueimac/Screenshot2010-07-30at35722PM.j pg[/IMG]
I've read online about Multicast Rate, Use Wide Channels and Use Interference Robustness but still not sure how I should use these setting and at what level.

+For now I have it set to Share Public IP address - Is this correct for my Network Setup with The Airport Extreme being the only router being used ?+
This would be the correct setting if the AirPort Extreme is connected to a simple modem (one ethernet port).
*Settings I have Enabled*
5 GHz name indicates that you have elected to use the option to assign a separate name to the 5 GHz network. This will allow you to "tell" compatible computers to connect to that network, rather than the slower 2.4 GHz network
Use Wide Channels is recommended for 5 GHz operation.
Interference Robustness often does more harm than good and should not be used unless you know you are in a area with a lot of wireless networks and you feel that your network is experiencing interference issues from a nearby network.

Not sure about memory type

Hi All - I have a Mac mini G4 1.5 Ghz processor. Currently have 512mb DDR SDRAM and would like to upgrade to 1GB. I went to the Crucial web site and they indicated a DDR PC2700 chip. When checking the memory type currently in my mac (512) it says it is a Type:DDR SDRAM Speed:PC3200U-30330. It sounds to me that the PC2700 is NOT a match to the PC3200U-30330?? - I'm not sure if I'm inerpreting it correctly. I've noticed in my searches that there doesn;t seem to be much info on the 1.5ghz machine. I'd just like some verification on the chip before I order. Any thoughts?

Welcome to Apple Discussions!
PC2700 RAM is the correct type for all the G4 minis, including your 1.5 model. However, many minis were sold with PC3200 memory, which is also compatible, though the faster RAM doesn't improve system performance in any way since it's clocked back to match the system's bus speed - which is designed for the PC2700 spec.
Thus you can use either.

Not sure about derviatives, file types, and export for lightroom

hello:
I am a new LR user and new to the DAM process. I am confused about something that is probably basic and fundamental to this process. My computer setup is two internal drives (working drive and a photo archive), as well as external backup and burning to dvd. Using LR for both image adjustment and catalog management (not using Photoshop). For raw I will be converting to dng on ingestion. I will add bulk metadata on ingestion and then bring images into LR to rate images and make basic image adjustments. These images will then be archived as originals.
Now, if I perform additional work on any of these archived images (addl. image adjustment or metadata) would these images be considered derviatives? If so, would I then go to export in LR to add to file name (e.g., masterfile, master.dng or .tif) before sending to, for instance, a working derviative folder before sending off to the archive?
Also, if I am sending these images to archive, but not sending out for email or web, do I need to change the dng to another file type (e.g., tif)?
Lastly, I have some old jpegs on media cards that I want to put through this process. Is there anything special that I need to do in handling these images versus dealing with raw?
I have read the DAM book as well as reading through various online resources, but this whole process is quite confusing for a beginner.
Please respond anytime.
Thanks
joe.

Lightroom is a non-destructive editor. This may be different than anything you have used in the past.
With non-destructive editors, there is no concept of original and derivative (unless you choose to use a 2nd program like Photoshop, sounds like you're not planning to do that). With a non-destructive editor, you make your changes in the editor (Develop Module), and these instructions are stored by Lightroom as a "recipe" and not as a distinct file on your hard disk. These instructions about your edits are applied whenever you use Lightroom to view your image (or whenever you choose to print from Lightroom or make a slidesehow from LR or make a web page from LR). The original is completely unchanged, and there is no edited derivative photo exported or saved. Thus, there is no need to segregate original and edited photo, because there is no saved edited photo. Additional edits in Lightroom are handled the same, original is unchanged, your edits are stored, and there is no derivative or saved photo.
The only time you would save a copy of the photo is if you wanted a copy for some non-Lightroom purpose, in which case you use File->Export... to make a file on disk in a "temporary" folder, then you use the file created in whatever non-Lightroom purpose you have, and when completed, you can delete the file in the temporary folder, knowing that LR can re-create it exactly if you ever need it again. If you are going to print from LR, or e-mail from LR, or create a web page from LR, or create a slideshow from LR, you do not need to create an exported photo.
JPGs and RAWs and DNGs are all handled the same by you, the user. Yes, there is internal differences that aren't important to your workflow.

Not sure about upgrading from Leopard to Snow Leopard, Sugguest??

I am thinking about upgrade from 10.5 to Snow leopard, but afraid anything would go wrong, which I can't afford that. Beside my leopard runs perfectly fine now. The only reason I am thinking about Snow leopard is I wants to install Win7 through BootCamp to open up some application only available in Windows.
There are so many problems from what I read so far for upgrading. I am just wondering if the benefits is more than the troubles?
Here is what I am scared of:
1. lose the programs/applications I have on leopard.
2. lose the files, program setting I have.
3. SL create crazy problem that I cannot solve.
Any suggestions? Thanks!!

Here is what I am scared of:
1. lose the programs/applications I have on leopard.
Shouldn't happen, but if anything goes wrong you could lose everything. You need to be prepared with installers and serial numbers with all your applications. This is not specific to this situation, you need that at all times. Your hard drive could decide to die tomorrow, and then where would you be?
2. lose the files, program setting I have.
See my answer to #1. You must have backups for any data files you aren't willing to lose. If you don't have backups, that should now be your new highest priority in life if you value your data. See my [Mac Backup Guide|http://www.reedcorner.net/thomas/guides/backups>.
3. SL create crazy problem that I cannot solve.
Make sure your computer meets [Snow Leopard system requirements|http://www.apple.com/macosx/specs.html], and make sure your software is compatible:
http://snowleopard.wikidot.com/
You should also check any hardware, like printers, scanners, etc, to be sure that there are SL-compatible drivers. Also, it should go without saying that you should [repair the hard drive with Disk Utility|http://support.apple.com/kb/TS1417] before any system install or update, though many people don't actually know that, so it must be said. If your system isn't problem-free, don't consider any system updates or upgrades until the problems are solved.

Hello-Not Sure About the MBP Leopard Settings for the Display

I want to get a new MBP for my next step. I was also wanting th one-on-one but my bud has not had much expereince (good) with this. I think he and I need the persnal training? Is that the same as one-on-one?
<edited by host> I was wondering about the new display and how good it looks but is it a look that that is conducive to using other programs. It appears to be soo glossy and if you are not looking head on you miss a lot. Is this new display popular? Can it be changed so other programs can take front and center when you need them t and not the Leopard display all the time.
any feedback, helpful <edited by host>. I hope tis makes some sense.

If I were in your position I'd wait until the last possible moment. Vastly faster MBPs are coming (the much discussed Merom chip), possibly by the start of the school season, but absolutely by Oct/Nov. I would not buy now. The current MBP is just the beginning, and in two years it will really be showing it's age.
17" seems right for you considering your major, but keep in mind the 17" can be a PITA to schelp around.
If you will be going to a large school they might offer better deals than the online Apple Edu store, so be sure to check before buying.
The issues you see posted here are not typical. There are a large number of people that do have problems, but there is an even larger universe of owners that have no problems.

Not sure about international txting

Similar Messages

Maybe you are looking for