Not sure if IDoc was created or received in file to idoc scenario

Hi,
I configured a file to idoc scenario in my test client for idoc MATMAS.MATMAS02 , now after going thru all the phases of design and configuration and creating partner profile using we20 , when I m executing the scenario , I am not sure wht happened to the idoc becz i can't see in the R/3 system using we05/02 or BD87 in the XI system .
Pl help how to rectify the error and find out where the error has actually occured.
ans will be rewrded
rgds
mojib

Hi Mojib,
first check in SXMB_MONI whether you have a success chequered flag for the file messge.................if there is error here, then rectify your this error and re-run your scenario................if you cannnot see your file msg in SXMB_MONI, then go to RWB and in comm channel monitoring, see the error in sender file comm channel status and rectify the error in sender file comm channel in ID and save and activate it and then re-run your scenario............
then execute SM58 to see in there is anything in tRFC.........if there is not anything here, then it means your IDOC has reached R/3.................
then in R/3, execute WE05 for the relevant period, then you will see your IDOC there with some status..........
Regards,
Rajeev Gupta

Similar Messages

I get this message "can not read because it was created by a newer version" I restored twice at different dates, uninstalled and installed again.. But nooo still there.

I get this message, "can not read because it was created by a newer version" I restored twice at different dates and uninstalled all apple stuff and reinstaled it again. Still nothing Help John

That message is usually a sign that you tried to roll back to an earlier build of iTunes, but occasionally I've seen it connected to a new upgrade. This technique should fix things.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

My laptop died, how do I access the music I downloaded on there? I'm not sure that sharing was set up on it. Is there a way to recover all that music? (I'm not very technically savvy!)

my laptop died, how do I access the music I downloaded on there? I'm not sure that sharing was set up on it. Is there a way to recover all that music? (I'm not very technically savvy!)

check out this post by Zevoneer.

HT200250 I couldn't open the files from a Canon XF 300 so I downloade the plugin from Apple but still can't open the files. I opened and clicked on the installer icon. I'm not sure the plugin was actually installed. can anyone help?

I couldn't open the files from a Canon XF 300 into Final Cut Pro 7, so I downloade the plugin from Apple but still can't open the files. I opened and clicked on the installer icon. I'm not sure the plugin was actually installed. C
an anyone help?
Message was edited by: BigDealCam123

As you probably know the Canon plug-in enables Log & Transfer in FCP7. I'm not sure whether it works with Final Cut Express or not.
Look in Applications>Canon Utilities. I'm running 10.6 as well and that is where it's located on my machine.
Good luck.
Russ

TS1741 Is there anyway that I can connect my phone to my Apple TV if I lost the remote? I'm not sure is sharing was turned on before I lost it but I am sure I'm hooked up to the right wifi.

Is there any way to hook up the remote app from my iphone to my Apple TV if I lost the remote? I'm not sure is sharing was turned on before I lost it but I am sure I'm hooked up to the right wifi.

Welcome to the Apple Community.
You could download and use the remote app, but it will only work once the Apple TV is set up, otherwise you will need the original remote or a replacement

I need an R7 version of my company logo which was created as a .AI file on CS6

I need an R7 version of my company logo which was created as a .AI file on CS6

Uggh. That won't work. I don't even know which version of AI last allowed saving so far back. CS6 only allows the AI 88 format and even that is probably merely a concession to the myriad of 3D, CAD, milling/ cutting and whatever programs that use it to import vector files on the smallest common denominator. You will definitely need anotehr version of AI inbetween or another program to save even further back...
Mylenium

Need to recover old playlists, old iTunes library will not open because it was created by a newer version?

I have a Mac mini, have installed iTunes on it and want to find some old playlists that were lost. I have several 'iTunes Libraries' with different dates but I cannot open any of them becauseit says they were created with a newer version of iTunes. Please help!

Somewhere in your process you ended up with an earlier version of iTunes than was used last with the library. iTunes 10.6.3 is the highest version that will run under OSX 10.5.8
iTunes 10.6.3.25 - http://support.apple.com/kb/DL1575
If you had an earlier version and still want that version I am not sure how to go about this. My iTunes library file does not say it was created with a particular version, although I admit I have not looked at the .xml copy to see if it is buried in the file itself. Apple only has a very limited number of iTunes versions openly posted, though you can still find just about any version if you look in the right places. You would have to kind of start low and work your way up to where you want to be since once you open a library with a version it cannot be reverted to an earlier version (make backups first).

ITunes will not open because library was created by newer version???

I am still using iTunes 9.2.1 and am not ready to go with v10.
I tried to open iTunes and got the message:
The file "iTunes Library" cannot be read because it was created by a newer version of iTunes.
I did notice that the last time I opened it, it looked a little different but went on with a sync of my 1st.gen AppleTV and then closed out.
I have not downloaded and upgraded to the newer version 10.
I have never had higher than 9.2.1 so I couldn't help but wonder if in some way I am being forced to go the newer v10.
Harold

I have discovered this:
I could not open iTunes as I previously stated in the normal method.
However, it will open when I created a quicktime movie from iMovies and prepared it for iTunes. When I click on the quicktime movie to play it will open iTunes to play the movie. That is when I see the different icons, etc.
I had something called ‘Ping’ to disable because I care nothing about that.
It does not look the same as I am use to with 9.2.1.
I went to the file menu> about> and low and behold it comes up ITUNES 10.
Remember, I have not downloaded ver.10 at any point so it must have come through a back door somehow.
So, I looked in my applications to see if iTunes app has changed. No, it still shows 9.2.1. I did a search in spotlight for iTunes 10 and nothing shows up. Go figure!
I am not a happy camper at this time and need to hear from Apple about this.
I am not ready to go to v10 and want an explanation.
I am not ready to go with v10 because I wanted to see how it effects my 1st. gen. AppleTV.
I don’t want to loose all the downloads I have on a device that I really like.
The new AppleTV has no hard drive and thus stores nothing as I understand it.
I have many TV programs purchased and stored from the History, Travel and Natl. Geographic, etc. channels.
Harold

I'm not sure if this was a firefox mozillia option or google but I use to be able to jump to selective text that i wanted to read whenever i would google

Whenever i would Google something and whatever search pages came available, I'm not sure if but i believe i would place my cursor on the preview arrow on the right of each page and the preview would be available with certain passages highlighted and i would be asked if i would like to "jump to this". I would like this feature back, it was very helpful!

Do you still see the preview if you hover the preview chevron?
If that isn't working then try these basic steps and Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

EREC: Multipal IDOC are getting created in receiver system for one IDOC

Hello Experts,
I ran in to one wearied issue in IDOC creation in Receiver system. I am running PFAL in sender system for only Person but 10 IDOC are getting created in receiver system. I don't know why is this happening.
This issue started popping up after we ran RBDAPP01-Inbound Processing of IDocs Ready for Transfer. We ran this to change IDOC to 53 status. Now I don't know what went wrong but Perner distribution is behaving
Appreciate your help.
Regards,
Krishna Bidwai
Losangeles USA.
818 527 0204.

Yes, employee is getting created after adding 0003 into the filter, but can u please answer my another question, i.e. PERNR in sender and receiver system should be same.
So in Receiver system (ECC) do i need to maintain external number range for PERNR?
Thanks

Downloading older version but Itunes libreay is not compatable because it was created by a newer version of itunes.

I have tried to download an older version but it will not run because the Itunes Library File was created by a newer version of iTunes. I have uninstalled the newer version but still can't run the older version. Caln anyone help me with this?

Stop trying to use an old version of iTunes.
Install the latest version from http://www.apple.com/itunes/download

Will not open because it was created by a newer version?

I haven't changed anything on my computer and now all of a sudden when I try to open itunes it says "the file "i Tunes Library.itl" cannot be read because it was created by a newer version of i Tunes. Please help me, thanks

I have the same problem. Nothing has changed. I can;t update I can only quit. Is there a way to re-load iphoto

Installing Infra 10.1.4.0.1 -- not sure what to do with warning received

I understand that in order to use SSO with Forms and Reports Standalone I need to install the Infra. Therefore, I spent the weekiend readiing the appropriate manuals for OID Concepts and Deployment Planning Guide, SSO Admin Guide, and manuals these 2 doc referenced.
I am trying to installing Infra10g on top of Forms and Reports standalone in my test environment on my laptop before I install on our servers.
My test environment is Windows XP. I am in the process of installing the Oracle Application Server Infrastructure 10g 10.1.4.0.1.
Select a Product to Install: Oracle Application Server Infrastructure 10g
Select Installation Type/Oracle Application Server Infrastructure 10g 10.1.4.0: Identity Management and Metadata Repository
Now I have the following Warrning:
The installation type you have chosen is not certified for production use on Windows XP. The following installation type is certified on this platform:
-- Oracle Identity Federation
You can click OK to continue with this unsupported installation, or go back to the "Selecgt a Product to Install" screen and change your selection.
I serarch on Oracle Identity Federation and didn't come up with much to determine what to do.
I don't need this to be certified, as I only want to play with it on my laptop to get an understanding of SSO. I am not sure that Identity Federation with give me the SSO framework that I need.
Any advise would be greatly appreciated,
Thank you in advance,
Mika
Edited by: Mika2 on Mar 24, 2009 11:19 AM

Because, you wanted to test SSO with Forms, you will be fine without the IDentity Federation on your test machine.
What Id Fed does is somewhat like the following:
"Although single sign-on (SSO) enjoys wide adoption for its ability to cut down the need for redundant logins, mere SSO is insufficient for companies which must operate in a federated environment - that is, an environment where services need to be shared with business partners while protecting those same services from unauthorized access.
A federated environment enables business partners to achieve integration in the identity management realm, by providing a mechanism for companies to share identity information across their respective security domains."
See this link for [Oracle Id Federation|http://download.oracle.com/docs/cd/B28196_01/idmanage.1014/b25355/intro.htm#sthref10] details.
AMN

My photoshop cs6 seems to be running very slow lately--not sure why? [was:question-please help]

My photoshop cs6 seems to be running very slow lately--not sure why?

Have you tried resetting your PRAM?
Shut the Mac down.
Holding the Cmd+Opt+P+R keys, press the power button.
Listen for the "startup chime" to sound three times and release the keys.
It should run better after it finishes booting up.

Itunes setup file is downloaded for my widows XP but after downloading it is not opened when try to open i receive message file moved after download

I can download itune setup file from apple.com but file is not opening and receive message file moved after downloading.

Not Enough Memory typically refers to RAM. How much RAM do you have on your 64-bit OS computer? Do you have other programs running that may be using most of the memory?

Not sure if IDoc was created or received in file to idoc scenario

Similar Messages

Maybe you are looking for