Not sure if these issues/feature requests have bee...

Hi,
Really like my Lumia 800 on the whole, however:
1 It would be nice if the player remembered the last position of a podcast. If that’s not possible could it be made possible to scroll to a position in a podcast rather keeping fingers on next or previous track keys
2. The call/voice command option on the inline remote is unavailable once you have started using the music player. I had to reboot the phone to be able to use it to voice dial.
3. When on vibrate and using the music player with earphones the player didn’t pause on an incoming call. It would be nice if on vibrate you still had some audible alert (only when earphones are connected and played through earphones etc..) when you have an incoming call.
4. Brings me nicely to notification volume when earphones attached. Way too loud.
Yes I have updated to the latest firmware.
Thanks

This isn't the correct site for these types of request. Nokia do not create or control the OS of the phone, Microsoft do
Try http://windowsphone.uservoice.com/forums/101801-feature-suggestions for feature suggestions.
That is the official site for this kind of thing.
1. It would be yes, but this is the way Microsoft have designed it, this can be requested at the link above.
2. The remotes still works, hold the button down for a couple of seconds and it will go into voice activation mode.
3. This is a bit of a strange request, you want vibrate only and an audio alert at the same time? Why not just leave the ringer on, note that you can add custom ringtones so you can make it make whatever sound you like.
4. This is a known bug with the latest update, hopefully Nokia is working on it and will fix it in a future update.

Similar Messages

Hello, I am having issues open very large files I created, one being 1,241,776 KB. I have PS 12.1 with 64 bit version. I am not sure if they issues I am having is because of the PS version I have, and whether or not I have to upgrade?

Hello, I am having issues open very large files I created, one being 1,241,776 KB. I have PS 12.1 with 64 bit version. I am not sure if they issues I am having is because of the PS version I have, and whether or not I have to upgrade?

I think more likely, it's a memory / scratch disk issue. 1.25 gigabytes is a very big image file!!
Nancy O.

HT1386 i've already synced my itunes on my laptop with my iphone but it's not synching all of the albums/songs. Everything was purchase through itunes so i'm not sure what the issue is.

i've already synced my itunes on my laptop with my iphone but it's not synching all of the albums/songs. Everything was purchase through itunes so i'm not sure what the issue is.

What settings do you have in iTunes? Is it set to sync all music, it is set to sync only checked songs? Is there anything different about the songs that it is not syncing. Is it possible they were they purchased with a different Apple ID?

I use my mac book to dj. however, i tend to get the beach ball alot. is this due to lack of memory or is it something else. ive been thinking about getting more memory but i am not sure what the issue is

I use my mac book to dj. however, i tend to get the beach ball alot. is this due to lack of memory or is it something else. ive been thinking about getting more memory but i am not sure what the issue is...i would like some advice before i go and buy more memory if it is not needed... i also do not keep my music on my lap top

Okay, so we've eliminated the lack of space since you have plenty.
See the screenshot from my Mac here:
Page ins and page outs - post those (or just post the same type of screenshot). If you have a lot of those, that means that your machine needs to keep swapping RAM around to make the best of what is available which can result in slow responses.
Also post the total amount of RAM you have (in my case, I have 12 GB)
You free RAM of 221 MB is very, very low - I'm guessing you only have a total of 2 GB. If that is the case, I would absolutely max out the machine (if you don't know how much RAM you can put in, post your model number here so we can help with that).

We are trying to do a Quick payment from payment workbench and getting 'FRM-41830: List of values contains no entries' error for payment document column/field. Payment document setup looks good. Not sure what the issue is.

We are trying to do a Quick payment from payment workbench and getting 'FRM-41830: List of values contains no entries' error for payment document column/field. Payment document setup looks good. Not sure what the issue is.

Already gone through following three notes but didn't found resolution.
APXPAWKB: FRM-41830 When Clicking on Payment Document LOV (Doc ID 1081305.1)
R12: APXPAWKB: Payment Document Lov Is Empty When Entering A Payment (Doc ID 857587.1)
R12: Payment Workbench Error: FRM-41830 List Of Values Contains No Entries (APXPAWKB.FMB) (Doc ID 1323875.1)

Hi, I need help my computer is not starting up at all, nothing happening when I press the button on/off. The battery charger is working as using it for another laptop. Not sure what to do. Anyone have any idea? many thanks

Hi, I need help my computer is not starting up at all, nothing happening when I press the button on/off. The battery charger is working as using it for another laptop. Not sure what to do. Anyone have any idea? many thanks

You could try a SMC reset:
http://support.apple.com/kb/HT3964
If no change, do what Allan advises.
Caio.

My itunes store won't open. Any suggestions on how to get this to work? I've already downloaded the newest version of itunes. I'm also not sure what Mac operating system I have..

My itunes store won't open. Any suggestions on how to get this to work? I've already downloaded the newest version of itunes. I'm also not sure what Mac operating system I have..

To find the version of Mac OS X on your computer, all you have to do is click the Apple logo and then About this Mac. For more info, take a look at this doc -> Finding your OS X version and build information
Do you see an error when you try to open the iTunes Store on your Mac?
This Apple doc is a good place to start -> iTunes: Advanced iTunes Store troubleshooting

Is it easier to restore to SL from ML if my TM backups are stored on an external drive? Not sure if these backups are bootable

I just installed ML and realized that some of my 3rd party software is not supported. I have been saving my TM backups on an external drive and was wondering if it is easier to restore to SL since TM backups on external drive. I am not very savvy with MAc OS and need help. I am also not sure how to know if I have a bootable backup of SL within TM backup.

See Pondini's TM FAQs, for starters.

My MacBook Air's storage is full. When I look at the storage, most of what is taking up the space is "other". I am not sure what these application or documents are but would like to reduce this so that I can store more pictures to edit. Any advice?

When I look at the storage, most of what is taking up the space is "other". I am not sure what these application or documents are but would like to reduce this so that I can store more pictures to edit. Any advice on how to find out what takes up this much space so that I can clear some off?

Freeing Up Space on The Hard Drive
1. See Lion's Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Also see Freeing space on your Mac OS X startup disk.
5. See Where did my Disk Space go?.
6. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.
What is "Other" and What Can I Do About It?- Apple Support Communities

Not sure of zen microphoto feature

Hi,
Been browsing on-line for data and reviews on microphoto, which I intend to purchase. I am very interested weather it can be used for direct photo transfer from digital camera (in my case konica minolta a200) this would be a great feature for me when travelling longer periods.
I've also followed the discussion on the forum (and @ nomads) about the firmware requests? Do you think (or have you seen) that there will be continuous development of the zen series thru firmwares or will it plain "new feature-new product" non consumer friendly strategy?
I've also been stupendified on the fact that the MP does not work unless XPsp is installed due to the MTP? Naturally the section made as hard dri've can be used as normal, lettered dri've under all os's? or have I misunderstood it's
All comments and info especially is most appreciated.
.pumpuli.

pumpuli .. re item , I (have just bought the microphoto) but highly doubt you could direct xfer photos to it while travelling (although is a great request and I'd use it the same way). It does not have a card reader, and if you connected a card reader to it via USB, I doubt that the unit has the drivers etc. to do that. not that it could not be developed by creative but it would have to be prioritized...not sure if there's any hacks out there to do this..would be interesting to see. can't comment on the other items. good luck!

(Harmful) edit not visible in WkiHistory in "Feature Requests"

Maybe this should be a discussion.
I've just removed a porn link from the Forums table in "Feature Requests for..."
The disturbing part is that the edit I removed first appeared in Rev.233, but was not visible in the WikiHistory. I can construct a lot of scenarios here (but I won't!) and all of them are scary. I cannot construct a scenario with a "harmless"
rating.
I'm only a newbie, it's not for me to take this further. But I am sufficiently experienced to know that a revision of best practise access control should be undertaken. Yesterday would be a good time to initiate it.
Gordon.

Hi Richard -
Thanks for answering. It's the comment to the edit that's missing.
I believe (I have not tested) that blank comments are not listed as part of the edit, so all we get is the user's edit listing, but no clue of what was done in the edit.
I draw your attention to Wikipedia, where all parts of the edit are summarized in the History List. I don't believe the Technet Wiki History needs that amount of data, but OTOH that is the sort of thing computers excel at. But I do believe Technet
Wiki should record blank comments as well as filled comments. Maybe a blank comment could be filled with the first 10 or 20 words of the edit?
Gordon.
Okay, please add the feature request to the Wiki section:
http://social.technet.microsoft.com/wiki/contents/articles/4703.feature-requests-for-technet-and-msdn-profiles-and-social-platform-tools.aspx#TechNet_Wiki
Hey, thanks for your edits here:
http://social.technet.microsoft.com/wiki/contents/articles/4703.feature-requests-for-technet-and-msdn-profiles-and-social-platform-tools/compare.aspx?revB=0&revA=234
You removed a dead link and a spam link!
And the history tab showed me all that!
We're actually thinking of migrating to the Wikimedia platform. Then that would give us your feature request. But it's best to capture it on our list so we don't lose sight of it.
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Template Bug? Not sure where to post. I have a sample.

It seems that Dreamweaver 2004 MX (version 7.0.1 on Windows
XP) gets confused if you create a page with invalid HTML. I've seen
some other posts on this, but I'm not sure if it's been fixed.
If you do the following, you'll get the popup warning "You
have made changes to code that is not marked as editable.. blah
blah blah" even though you did not make changes to uneditable
regions.
1. Make a remote site with a local web directory. On my
machine, I run Apache (
http://localhost), treat it as a
remote site, and copy files to Apache's local directory.
2. Create a template with 1 editable region: EditRegion3
3. Create a page using the template.
4. Enter in a <form> </form>tag and some text.
5. Select Put for the file.
Works fine at this point.
To invoke the bug:
1. Remove the </form> tag.
2. Select put.
3. The InstanceBeginEditable name="EditRegion3" tag turns
color: from gray to black.
4. Close and reopen the file.
5. Make a minor edit.
6. Select Put.
7. Presto - warning dialogue shows.
I attached both versions. By the way, I was able to "fix" the
broken edit region by closing (not saving changes) and reopening
the file, adding back the missing </form> and saving. Then
Put works with no error message.

So lemme understand this. If you hack a page so that it
contains invalid
code, you get a template error? Is that a surprise?
Anyhow, there are several workarounds, and I see that you
have found one.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"fred_sl" <[email protected]> wrote in
message
news:[email protected]...
> It seems that Dreamweaver 2004 MX (version 7.0.1 on
Windows XP) gets
> confused
> if you create a page with invalid HTML. I've seen some
other posts on
> this, but
> I'm not sure if it's been fixed.
>
> If you do the following, you'll get the popup warning
"You have made
> changes
> to code that is not marked as editable.. blah blah blah"
even though you
> did
> not make changes to uneditable regions.
>
> 1. Make a remote site with a local web directory. On my
machine, I run
> Apache
> (
http://localhost), treat it as a
remote site, and copy files to Apache's
> local
> directory.
> 2. Create a template with 1 editable region: EditRegion3
> 3. Create a page using the template.
> 4. Enter in a <form> </form>tag and some
text.
> 5. Select Put for the file.
>
> Works fine at this point.
>
> To invoke the bug:
> 1. Remove the </form> tag.
> 2. Select put.
> 3. The InstanceBeginEditable name="EditRegion3" tag
turns color: from gray
> to
> black.
> 4. Close and reopen the file.
> 5. Make a minor edit.
> 6. Select Put.
> 7. Presto - warning dialogue shows.
>
> I attached both versions. By the way, I was able to
"fix" the broken edit
> region by closing (not saving changes) and reopening the
file, adding back
> the
> missing </form> and saving. Then Put works with no
error message.
>
>
>
> // VALID HTML
>
> //////////////////////
>
> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01
Transitional//EN"
> "
http://www.w3.org/TR/html4/loose.dtd">
> <html>
> <head>
> <meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1">
> 
> <title>Admin - Image Upload</title>
> 
> 
> 
> </head>
>
> <body>
> 
>
> <form method="POST" enctype="multipart/form-data">
> <table>
> <tr><td>Image
File</td><td><input type="file"
name="FileName"></td></tr>
> <tr><td colspan="2"><input type="submit"
name="Submit"></td></tr>
> </table>
> </form>
>
> </body>
> </html>
>
> // INVALID HTML
>
> //////////////////
>
> <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01
Transitional//EN"
> "
http://www.w3.org/TR/html4/loose.dtd">
> <html>
> <head>
> <meta http-equiv="Content-Type" content="text/html;
charset=iso-8859-1">
> 
> <title>Admin - Image Upload</title>
> 
> 
> 
> </head>
>
> <body>
> 
>
> <form method="POST" enctype="multipart/form-data">
> <table>
> <tr><td>Image
File</td><td><input type="file"
name="FileName"></td></tr>
> <tr><td colspan="2"><input type="submit"
name="Submit"></td></tr>
> </table>
>
> </body>
> </html>
>

I iphone keeps saying not enough storage...go to settings. Not sure what to do. I have the 5 iphone

My iphone 5 keeps saying not enough storage to backup. go to settings. not sure what to do. Can not update my phone?

Turn on computer
Open itunes
Connect iphone
Select less content to sync
Sync

Is there a way to have iPad mail NOT show the last opened email? If not, can this be a feature request?

Sometimes while running iPad training and usage sessions I may have to show my screen to faculty or staff while showing them a feature or how to use an app. It would be nice if the mail app didn't show the last opened message in the preview area for the sake of privacy. Can this be turned off or changed?

No.
If you wish to make a suggestion to Apple post your idea at: http://www.apple.com/feedback/ipad.html
By the way this is just a user-to-user technical assistance forum. Apple is not here. We are all users here.

HT1725 I downloaded an album from itunes and only half of the songs have downloaded. The rest of the songs keep trying to download and then come up with an error saying they cannot download at this time. I'm not sure what the issue is.

I downloaded an album from itunes and only half of the songs have downloaded. The rest keep trying to download, but I keep getting a message that says, "Song cannot be downloaded at this time. Do you want to retry or be done." Each time I retry, the same thing happens. They will not download. I have restarted my phone and the same problem remains.

Other people have been having similar problems with songs over a number of days.
Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting it from your iTunes library and redownload it via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes : re-downloading.
If you aren't in a country where you can re-download music or if it re-downloads in the same state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that song and use the 'Report a Problem' link.

Not sure if these issues/feature requests have bee...

Similar Messages

Maybe you are looking for