Not sure what is wrong.

I am thinking it's a flash related problem, but I don't think it is. But anyway.
AIM/MSN/Yahoo - whenever I type and send something to someone, it IMMEDIATLY signs me off. Likewise when someone tries to IM me. The second they hit enter they see me sign off. I can sign on fine, but the minute someone IMs me or I IM them, I get immediatly kicked off. On Yahoo it signs me in and out CONSTANTLY, probably 3 times per 10 seconds, and it's annoying my friends.
Youtube - videos will load maybe 1/4 of the way, then stop. I have to click above the place it stopped in order for it to go again, but then stops once again at a certain point.
Flash based chats - The minute I press enter to type something in I am immediatly kicked off. People say they can IM me back on it, but I cannot see anything on my end.
Ugh this problem is annoying and now becoming a huge pain. actually need to get on AIM and talk with someone really important and I don't have their number. Please help if you can.
PLUS, I already tried un-installing all the programs including Flash and rebooting. Nothing. Please help, thanks.

Try the suggestions in the following:
Troubleshoot Internet connection problems
Repair and Reset Windows Vista TCP/IP Winsock Catalog Corruption
Reinstall and Reset TCP/IP (Internet Protocol) in Windows Vista, 2003 and XP
How to reset Internet Explorer settings

Similar Messages

Can't get ACD working not sure what's wrong

First off can users with SNR or shared extensions work with ACD? I'm following the guide but can't get anything to work.
I made a basic ACD called 515 as the pilot number with all basic settings and put 2 of my extensions as members. I then put on my autoattendant that pressing 1 goes to the ACD.
If I call the auto attendant and press 1, it says connected, then just hangs up.
I also don't know how to tell if I'm logged in to the ACD or how to log out. It says in the help that you use the HLog key to log in and out, and I do have that key on my 7970 and 7960 but its grayed out on the 7970 and on both phones just says That key is not active here. So not sure what's wrong, it seems like it's just not working in general based on it just hanging up when the AA transfers a call to it. If I try to dial the pilot number I get a busy signal but I think it has to come from the AA from what the guide said.
Not sure what's going on or how to troubleshoot this, any suggestions?

Okay good to know because the help pages on setting up hunt groups say the extensions can't be shared ones so thought maybe that's why. It seems to be something though because I made a new normal extension, removed the shared ones from the ACD members list and added just the normal one. Now when I press HLog on the phone it logs in and out it says.
However calling the ACD does the same thing, just hangs up.
Is Shared extension not what I'm supposed to use if I want to have say extension 300 show on a physical phone and IP communicator? Since normal only lets you add it to one device, I assume share is the right option? Just seems like it causes issues with ACD.
Not sure how to run that command you said above, I'm just following the built in help which seems straightforward just not sure why it won't work.

Need help with my satellite a105 not sure what is wrong

I am not sure what is wrong but I think my laptop has viruses and I can not even update my virus software.
When I go to google and type in anything, say I type in virus protection it takes me to the search results but when I click on any of the sites I get redirected to other search pages. I can not get to any page even if I type it directly in the address bar.
I do not have a recovery disk that I know of because I was just going to reformat. Any ideas of what I can do? a computer guy wants $125.00 to fix it.
thank you
Denise

The problem is that, a lot of things work themselves deep into the Registry. Clearly you have some kind of click hijacker on your system if all your links are going places you don't want.
OK, so you can try a couple of things.
First, figure out if there is a way to update your anti-virus without doing it from within the program. It may be possible to download the update files on your other computer and burn them to CD. I would not recommend any method other than a CD-Rom. If you use a USB flash stick you may transfer the infection back to your other computer. If that's not possible...
Secondly, you can download a program called Hijack This on your other computer. http://www.trendsecure.com/portal/en-US/tools/security_tools/hijackthis It will tell you what is running on startup, what kind of browser helper objects (BHO's) you have in your browser, etc. If you can get this installed and run, post the log here, that will be useful to getting it fixed.
A205-S7442
C2D 1.5
4GB Kingston Value RAM
120GB Fujitsu HDD
Windows 7 beta

My iPad2 suddenly has battery draining very quickly. Started using Evernote and installed new OS. Not sure what is wrong

Installed OS 6. Started using Evernote. All of a sudden last two days battery is listed as 69% after 5 hours. In the past it has lasted 2 or 3 days. Not sure what has happend. Could it be the new OS? Maybe a setting in iPad or in Evernote?

Installed OS 6. Started using Evernote. All of a sudden last two days battery is listed as 69% after 5 hours. In the past it has lasted 2 or 3 days. Not sure what has happend. Could it be the new OS? Maybe a setting in iPad or in Evernote?

Could not click on anything in Recovery disk and log in screen, but I can move the cursor around. Using 10.8, not sure what's wrong, anyone have an idea?

So the problem is, I cannot click on anything in the Recovery Disk and Log in screens (to enter your password), but I can move the cursor. My trackpad works fine everywhere else except for these screens. If I connect a USB mouse, I am able to click on things in these screens.
NOTE: I am not just tapping, I am really clicking on the trackpad.
I recall some time ago when this wasn't happening, not sure if that was when I was on Leopard. I sort of suspect 10.8.x, but I'm not too sure.
Has anyone else experienced this? Would appreciate help. Thanks!

Try an SMC reset. The article covers when this is required, but doing this will not affect anything.
Reset SMC

Not sure what's wrong with my laptop.

My laptop looks like this (picture below) when I turn it on. I took it in to fix it because I was getting the blue screen but when i got it back they gave it to me like this and they told me it was a graphics card problem but I am totally confused. By looking at the picture, do you think that the screen is broken or could it be a video/graphics card problem? Any other possiblities? Thank you for your help!!
P.S. Not sure if it's needed but the model is dv7-4069wm
This question was solved.
View Solution.

Hi arelymedina,
I will be happy to help you with trying to resolve the graphics problem with your HP Pavilion dv7-4069wm Entertainment Notebook. Have you been able to connect an external monitor to see if that shows the same issue? This is a way that we can make sure it's not the hardware of the notebook screen itself.
Looking forward to your response.
Thank you,
I worked on behalf of HP.

Quicktime issue/file issue/not sure what is wrong! Help Please!

Hey there,
Hopefully you can answer my question. My friend was making a slideshow on idvd, but is unable to burn a disk, and has a mini-dvi out on her computer which she does not have an adaptor for. We have a presentation tomorrow so I was trying to put the file on my computer to either burn to a disk. We have tried transferring the file via shared folders, but when we go to open it in imovie it says that it is a "write protected file". We have read and write enable for both shared folders. When we tried transferring it with a flash drive that didn't work either and we got the same error. Quicktime also fails to open it. Right now I'm on my last guess with making a disk image through idvd and attempting to open that on my computer!
Do you have any suggestions or ideas? I'm running out of ideas and really need this to work by tomorrow night! Any ideas/help/suggestions would be so greatly appreciated!
Thanks, John

nvm, put it in itunes and converted it to ipod/iphone format and was able to get it to work. Wow, that was so much easier then what I expected!

Not sure what's wrong with my computer

I have a HP pavilion a200n. It was working great on 12/20/08. I went away for a few days and when I came home and turned it on it would not load windows, all it would go to a page that showed these confirgurations and at the bottom "F1 for settings". If I try pressing "F1 or shift F1" I just get a beeping sound. Any answer or advice would be greatly appreciated.
Thank you,
Marcia
Solved!
Go to Solution.

Hi Marciah0219, welcome!
Hockeycunuckjc has a good idea, just want to remind people to always perform a backup (or get help) before doing a system restore. However, because you stated you cannot get into safe mode, you may need to just shut down the machine, unplug the keyboard and carefully reconnect it; also consider trying another keyboard. If these tests do not work, please reply with the beep pattern (for example, one long and one short beep - pause - repeats).
Matthew|Community Advocate | Best Buy® Corporate
Visit our Channel on
Private Message

Not sure what went wrong :(

downloaded the update, tried installing it on my phone, something messed up and I lost everything on it and now it's going through the "restore" phase

Same issue.
gave the error msg http://discussions.apple.com/thread.jspa?threadID=2025972&tstart=120
had to restore to factory settings.
dude is gonna be ****** when he gets out of his meeting.

HT1688 Hi, just bought my daughter an Iphone 4s and I can't get it to let her on youtube, Facebook etc., keeps saying no internet connection. My husband and I have 3G smartphones and we can get on them on ours, so I'm not sure what I'm doing wrong. Also,

Hi, just bought my daughter an Iphone 4s and I can't get it to let her on youtube, Facebook etc., keeps saying no internet connection. My husband and I have 3G smartphones and we can get on them on ours, so I'm not sure what I'm doing wrong. Also, my other daughter has the same phone and has no trouble getting on these sites either. Any information to help is greatly appreciated. Thanks

Well, did you activate this new phone?

I am in Aperture photos-browser - view. Amtrying to find "sort" by file name to elimanate duplcates. Sort option does not appear. Not sure what I am doing wrong.

I am in Aperture -photos - browser - view. Am trying to find "Sort" by filename to elimate duplicates. I cannot find "sort in Viewer and not sure what I am doing wrong. Help

This is what the top of the Viewer should look like:
Here is the same view with the pulldown opened:
What is it that you see? Include a screenshot.

Hi. I am having issues with copying files to my shared WB 2TB HDD connected to my airport extreme. Comes up with error 50. I am using a Macbook Pro to copy from so not sure what I am doing wrong. Can someone help? thanks Rory

Hi. I am having issues with copying files to my shared WB 2TB HDD connected to my airport extreme. Comes up with error 50. I am using a Macbook Pro to copy from so not sure what I am doing wrong. Can someone help? thanks Rory

These links might provide some information that may be of help.
http://support.apple.com/kb/TA20831
https://discussions.apple.com/message/2035035?messageID=2035035
I've encountered this error myself upon occasion. If I remember correctly, it was a permissions/ownership issue with the some of the files I was copying.

I am trying to print redplum coupons and I can't, help. I have updated java, adobe flash, and made sure my printer was set on default. I am not sure what I am doing wrong. I have contacted redplum and no one will help.

I am trying to print redplum coupons and I can't, help. I have updated java, adobe flash, and made sure my printer was set on default. I am not sure what I am doing wrong. I have contacted redplum and no one will help.

No Apple response??? Redplum/Valassis will not help either. I searched, using the cups error message and though it is Unbuntu, same error so maybe useful...only problem: details would not display unless I join Unbuntu forum. What a pain to do anything with my Mac or find any help. I honestly regret buying this buggy OS.
Anyway, here is what I found, FYI:
http://ubuntuforums.org/showthread.php?t=483415
As the old saying goes: when in doubt, consult the manual. The problem appears to be that I added the printer using the KDE Add Printer Wizard. It was automatically given a "socket" URI instead of an "lpd" one. When I:
- altered the printer settings at http://localhost:631 (the CUPS admin page) as instructed in the manual for the printer, and
- copied the PPD file into a second place on the hard drive (as instructed on ubunutuforums, see the link above)
..everything started working.
It's still slower than windows, but I can live with that
Probably a simple fix. Change the socket I.P. to match the printer I.P. like this:
socket://192.168.1.86:9100. The thing I'm concerned with using socket:// is that AFAIK the printer I.P. must not change. In my case I'm able to assign a static I.P. address to the printer but it's something to consider.
I found that the only thing I needed to do was change socket to lpd (and remove :9100 off the end as well). See Solving Ubuntu printer broken pipe problem (DocuPrint C525A) . BTW thanks for steering me in the right direction - very grateful.
Solving Ubuntu printer “broken pipe” problem (DocuPrint C525A)
Posted on November 25, 2008
Are you having a problem with your printer under the latest versions of Ubuntu (perhaps it worked under an older version)? Are you able to print short documents, but not longer, or more graphics-intensive, documents? (e.g. the unfortunate people at http://ubuntuforums.org/showthread.php?t=625493). Do they sit there as Processing for ages and then switch to Held? If you have the same problem I had the solution I tried may work for you too. Firstly, check your cups error log:
sudo gedit /var/log/cups/error_log
If you see anything like the following, the solution may be simple:
[Job 201] Unable to write print data: Broken pipe
PID 13359 (/usr/lib/cups/backend/socket) stopped with status 1!
System > Administration > Printing and right click on your printer, selecting Properties. Settings > Device URI
If you see something like socket://your_printer_ip_address:9100 just change socket to lpd and remove the :9100 off the end. Then click on apply.
Apparently lpd is a more modern protocol which works with most printers whereas socket is more raw (and potentially faster but riskier in a network situation). Somewhere along the line, the default Ubuntu/Gnome setup for networked printers shifted from lpd to socket. Some primitive printers will have benefited whereas a larger number of more modern printers will have suffered.
Please correct me if I am wrong (which is highly possible) but the underlying problem could be that socket may make the printer wait a long time for a large file to be processed ready for printing. Some printers, such as the Fuji Xerox DocuPrint C525A, may drop the socket if things take too long to start coming through.
Changing timeout settings might work but lpd is better than socket so it is the preferred solution in any case.
If this works for you, please leave a comment to let others know (ideally with a description of the printer and Ubuntu version). Printer may be relevant if it doesn’t support the direct stream protocol properly. NB I may take a while to let your comment through because of the volume of spam. Sorry about that.
Finally, thanks to sphilli8 for the steer in the right direction at http://ubuntuforums.org/showthread.php?p=6245626.
http://ubuntuforums.org/showthread.php?t=483415

I am trying to submit the link to the podcast RSS feed but when I press submit I receive the error "We care currently experiencing technical difficulties. Please try again later." I am not sure what I am doing wrong.

I am trying to submit the link to the podcast RSS feed but when I press submit I receive the error "We care currently experiencing technical difficulties. Please try again later." I am not sure what I am doing wrong.

I am using http://www.greater-light.org/channel.php?id=3344. I have been trying over a month and I am receiving the same error.
I am on Windows 7.
Version iTunes 11.1.4.62.

Hi there not sure what I did wrong but got a message asking if I would allow the application config but was warned by commputer not to now I can't log into some sites and others won't load properly, anyone had this problem and has advice?

Hi there not sure what I did wrong but got a message asking if I would allow the application config but was warned by commputer not to now I can't log into some sites and others won't load properly, some sites will log in but only if the stay logged in box is not checked,I'v have cleared my cashe and internet history looked through securtity setting but nothing, anyone had this problem and has any advice?

See KB Article: http://support.apple.com/kb/HT1274 Changing or resetting an account password
my current country does not have a apple store....
AS are not the only places that repair Macs. Check out the following:
International AASP’s & Other Services
AASP's Outside of the USA
How to find your nearest Apple Authorized Service Provider (AASP)
Also, there are User Groups that can possible help.

Not sure what is wrong.

Similar Messages

Maybe you are looking for