Not sure what what is on my homehub!
So got a new PC, and generally on the hub whatever I named the device comes up! However, i'm not sure what device my new pc is and even if its connected and don't see it on the homepage as connected. I have a homehub version 2.
The reason I need to know is because I need to forward some ports on the device
Thanks,
Jack
dippy12 wrote:
Hi Chris,
I've got 5 unknowns, but none of them actually correspond with the mac addresses when I IP config?!
Jack
Only way to identify what is happening is remove the other items from the hub. Switch off all the devices in your house except the PC. Open the Home Hub Browser page and go to the Home Network page. Initially it will show all the devices that have ever connected to the hub. Press the reset button. You should now only have one device listed (the PC). If all the devices disappear (and you are connected via WiFi) then open another browser tab and go to the BBC iPlayer page and start watching a program. Switch back to Home Hub Browser web page and press the reset button again. It should then appear. If it is listed as "Unknown-xx-xx-xx-xx-xx-xx" then click on it and change it's name to something meaningful.
In your IPConfig window was the IPv4 Address: 192.168.1.xxx or 10.xxx.xxx.xxx?
Actually if it is a Windows 7 PC then the name should be filled in for you. It will match the PC's name allocated to it by Windows. See Post 2 above to find out your PC's Windows name.
On the MAC address front (from IPConfig), your PC may have more than one entry if it has an Ethernet network port, WiFi, Firewire, or Bluetooth ports. Check all of them against the hub's list.
Chris.
Similar Messages
-
I tried updating my iPod 5th gen to iOS 8 but it only shows me a picture of the iTunes logo and a charger at the bottom, I'm not sure what this means or what I need to do. Can someone please help me?
After restoring to factory settings/new iPod you will then have to restore from backup
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Hi, just bought my daughter an Iphone 4s and I can't get it to let her on youtube, Facebook etc., keeps saying no internet connection. My husband and I have 3G smartphones and we can get on them on ours, so I'm not sure what I'm doing wrong. Also, my other daughter has the same phone and has no trouble getting on these sites either. Any information to help is greatly appreciated. Thanks
Well, did you activate this new phone?
-
I have a 2nd generation Ipod.
I have it connected to my computer and see (my name) ipod on my screen.
Everytime I try to add a new song to the Ipod, this message comes up and I am not sure what to do:
The Ipod, (my name) is synced with another ITunes library on A74F65. Do you want to erase this Ipod and sync with this ITunes Library?
An Ipod can be synced with only one ITunes library at a time. Erasing and syncing replaces the contents of this IPod with the contents of this ITunes library.
Then it asks me if I want to delete and sync.
I am not sure what to do for fear of erasing everything I have put on my Ipod.
I would appreciate if someone could help me out.If I understand you correctly, you are trying to use iTunes to play the Music in your iPod but which is not in your itunes library. I don't think Apple design iTunes for use in your way. As to put and play music in iPod, the music has to be in iTunes first, so you play music in the iTunes music Library. the window with Ipod music is just to show you which music are already in the Ipod, in case you want to Manually Manage your huge music library.
Here is the iPod/iTunes manual from the Apple Support Site.
http://manuals.info.apple.com/en_US/iPod_Features_Guide.pdf
Have A NICE DAY! -
I am trying to decide which OS to upgrade to because I am not sure what my computer will handle
I am trying to decide which OS to upgrade to because I am not sure what my computer will handle and I don't want to pay to upgrade to a version that I do not have the hardware to support (i.e. memory or CPU speed). I tried to install Turbo Tax and I was told I needed 10.7 or higher. Could you please help. I have an iMac and my OS is 10.6.8 plus the details below.
Model Name: iMac
Model Identifier: iMac11,2
Processor Name: Intel Core i3
Processor Speed: 3.06 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache (per core): 256 KB
L3 Cache: 4 MB
Memory: 4 GB
Thanks
<Re-Titled By Host>System requirements for OS X Lion
OS X Mountain Lion system requirements
OS X Mavericks system requirements
Apple - OS X Yosemite system requirements -
The problem is with my iPhoto on my Macbook air. I am trying to move my library from my airbook onto my passport drive. I did it and deleted it from the airbook but it simply re appeared possibly from the cloud. Not sure what to do next. Sorry I am not a techie.
Sorry - we can not see you
what do you have? Version of iPhoto? Of the OS? How is the passport connected to your Mac? What format is the passport (for the iphoto library it must be Mac OS extended (journaled) )? The iPhoto library is not and can not be on the cloud (maybe later with the Photos Application)
LN -
XML Bursting program was messed up the report format and output, not sure what is causing an issue
Hi All,
I need burst the report based on the customer number for some customers and burst based on invoice number for some customers in the same bursting program. I have made the changes accordingly and sending email attachments as expected, but when the output sent for as an attachment for each invoice the report does not printing in full format, its completely ignore one child block. Not sure what was the issue. This is very very urgent please help me out.
Following is my bursting code:
<?xml version="1.0" encoding="UTF-8"?>
<xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi" type="bursting">
<xapi:request select="/XXARINVOICE/LIST_G_CUST_HDR/G_CUST_HDR">
<xapi:delivery>
<xapi:email id="123" server="${SMTP_SERVER_NAME}" port="25" from="${XX_EMAIL}" reply-to = "">
<xapi:message id="123" to="${EXCLUDED_BILL_TO_EMAIL}" attachment="true"
subject="Confirmation for your Invoice(s)">
Dear Customer,
Thank you for placing an order with XX cust.
Please review the attached invoice(s).
Regards,
Customer Service
</xapi:message>
</xapi:email>
</xapi:delivery>
<xapi:document output="XX_INVOICE_EMAIL_${CUST_NO}" output-type="pdf" delivery="123">
<xapi:template type="rtf" location="xdo://xxabc.XXARNONEDIINVOICE.en.00/?getSource=true" filter=".//G_INVOICE_HDR[EXCLUDED_BILL_TO_EMAIL!='N']"/>
</xapi:document>
</xapi:request>
<xapi:request select="/XXARINVOICE/LIST_G_CUST_HDR/G_CUST_HDR">
<xapi:delivery>
<xapi:email id="123" server="${SMTP_SERVER_NAME}" port="25" from="${XX_EMAIL}" reply-to = "">
<xapi:message id="123" to="${EXCLUDED_BILL_TO_FAX}" attachment="true"
subject="Confirmation for your Invoice(s)">
Dear Customer,
Thank you for placing an order with XX cust.
Please review the invoice(s).
Regards,
Customer Service
</xapi:message>
</xapi:email>
</xapi:delivery>
<xapi:document output="XX_INVOICE_FAX_${CUST_NO}" output-type="pdf" delivery="123">
<xapi:template type="rtf" location="xdo://xxabc.XXARNONEDIINVOICE.en.00/?getSource=true" filter=".//G_INVOICE_HDR[EXCLUDED_BILL_TO_FAX!='N']"/>
</xapi:document>
</xapi:request>
<!-- START Sending email for each invoice in CR2197-->
<xapi:request select="/XXARINVOICE/LIST_G_CUST_HDR/G_CUST_HDR/LIST_G_INVOICE_HDR/G_INVOICE_HDR">
<xapi:delivery>
<xapi:email id="123" server="${SMTP_SERVER_NAME}" port="25" from="${XX_EMAIL}" reply-to = "">
<xapi:message id="123" to="${BILL_TO_EMAIL}" attachment="true"
subject="Confirmation for your Invoice ${INVOICE_NO}">
Dear Customer,
Thank you for placing an order with XX cust.
Please review the attached invoice.
Regards,
Customer Service
</xapi:message>
</xapi:email>
</xapi:delivery>
<xapi:document output="XX_INVOICE_EMAIL_${INVOICE_NO}" output-type="pdf" delivery="123">
<xapi:template type="rtf" location="xdo://xxabc.XXARNONEDIINVOICE.en.00/?getSource=true" filter=".//G_INVOICE_HDR[BILL_TO_EMAIL!='N']"/>
</xapi:document>
</xapi:request>
<xapi:request select="/XXARINVOICE/LIST_G_CUST_HDR/G_CUST_HDR/LIST_G_INVOICE_HDR/G_INVOICE_HDR">
<xapi:delivery>
<xapi:email id="123" server="${SMTP_SERVER_NAME}" port="25" from="${XX_EMAIL}" reply-to = "">
<xapi:message id="123" to="${BILL_TO_FAX}" attachment="true"
subject="Confirmation for your Invoice ${INVOICE_NO}">
Dear Customer,
Thank you for placing an order with XX cust.
Please review the invoice.
Regards,
Customer Service
</xapi:message>
</xapi:email>
</xapi:delivery>
<xapi:document output="XX_INVOICE_FAX_${INVOICE_NO}" output-type="pdf" delivery="123">
<xapi:template type="rtf" location="xdo://xxabc.XXARNONEDIINVOICE.en.00/?getSource=true" filter=".//G_INVOICE_HDR[BILL_TO_FAX!='N']"/>
</xapi:document>
</xapi:request>
<!-- END Sending email for each invoice in CR2197-->
<xapi:request select="/XXARINVOICE/LIST_G_CUST_HDR/G_CUST_HDR/LIST_G_INVOICE_HDR/G_INVOICE_HDR">
<xapi:delivery>
<xapi:filesystem output="${OUT_DIR}/INV_${SALES_ORDER}_${ORG_ID}_${INVOICE_NO}_${REQUEST_ID}_${INVOICE_DATE}.pdf">
</xapi:filesystem>
</xapi:delivery>
<xapi:document output-type="pdf">
<xapi:template type="rtf" location="xdo://xxabc.XXARNONEDIINVOICE.en.00/?getSource=true" filter=".////XXARINVOICE[P_ATTACH='Y']"/>
</xapi:document>
</xapi:request>
</xapi:requestset>
Thanks in Advance,
JagadishInitialize this:
String pet = "":>
error is H:\JAVA\PetAdvice.java:88: variable pet might not have been initialized
return pet;Geez, the error tells you the source file and the line # at which the problem occurred, in addition to a lucid description. Why couldn't you figure it out for yourself?
% -
hi there...
1) firefox has been giving me problems for several months where it just stops responding, meaning I click on one of the 5 tabs open then it gives me msg "firefox not responding", also happens when I am working with xsitepro website builder development software stops me from moving around the xsitepro program and firefox again says firefox not responding
Note: However, when firefox gives me "not responding msg" it responds after a few minutes and gives me access the tab i clicked on but then happens again when i try to click on another tab
2) went to a page that firefox listed plugins http://www.mozilla.com/en-US/plugincheck/ and there are several plugins listed that I do not know what it means below the ones it says it is updated, those are listed as " unknown plugin and ?research "
Not sure what does this mean as far as those plugins that are listed unknown and research. I did a search to see if I could find those plugins under addons but did not see them listed so are these plugins being used and installed on my firefox browswer and if so why are they hidden if they are installed or are they not installed at all
I did a copy and paste of the plugin check page so u can see what i see below:
The plugins listed below are up to date
Plugin Icon
Plugin Icon
Java(TM) Platform SE 6 U22
Next Generation Java Plug-in 1.6.0_22 for Mozilla browsers 1.6.0.22 Up to Date
Plugin Icon
Shockwave Flash
Shockwave Flash 10.1 r102 10.1.102.64 Up to Date
Plugin Icon
Java Deployment Toolkit 6.0.220.4
NPRuntime Script Plug-in Library for Java(TM) Deploy 1.6.0.22 Up to Date
Plugin Icon
Adobe Acrobat
Adobe PDF Plug-In For Firefox and Netscape "9.4.0" 9.4.0.195 Up to Date
Plugin Icon
Google Update
Google Update Unknown plugin Research
Plugin Icon
RealPlayer(tm) HTML5VideoShim Plug-In (32-bit)
RealPlayer(tm) HTML5VideoShim Plug-In Unknown plugin Research
Plugin Icon
RealJukebox NS Plugin
RealJukebox Netscape Plugin Unknown plugin Research
Plugin Icon
RealPlayer Version Plugin
6.0.12.775 Unknown pluginOkay, that's a lot of information. I think the key part for support purposes is this:
''TheDrive [[#question-1057777|said]]''
<blockquote>
Just try yourself. Setup new profile and work a few days or weeks on any theme(s). Do not close tabs (at least ones, which you wanna explore once more). If your PC has 2-4Gb of RAM you will notice FF stopped to save session info after you will have a 50-100 tabs opened (you'll see sessionstore.js or session-backups\*.js script files reached 15-20-30MB long and stopped to change and it's LastMod date/time(s) are frozen) ...<br><br>
... I've noticed FF started to hang more and more and checked previous.js, recovery.bak, recovery.js was last modified on Apr, 14 but today is Apr, 16! I've lost one more hour trying to save tabs, even installed Session Manager, promised session saving on user demand but after a half hour of action against hanging FF, plugin showed me that I have NO ONE tab to save. I've managed to copy a few URLs to the text file before FF have completely fallen.</blockquote>
You're not the first person to report that the sessionstore.js or recovery.js file stopped updating with new activity. However, it's rare enough that I can't recall whether we have gotten to the bottom of it in a previous thread. I'll see whether I can search it up.
Meanwhile, someone might be able to come up with a way to watch for problems and extract some debug information, but I'm not personally familiar with such tools. -
Before I upgraded to 8.0 I could double click and see all open Apps and then close them. Now when I double click I am not sure what I am seeing or what to do?
The format keeps changing but the basics remain...in the center of the screen are large images of the recent apps which you can close by swiping up and away.
-
Ok I got my computer worked on to remove viruses so I had to reinstal itunes now everythings gone from my itunes tried to sync my ipod it won't sync my music ,apps, or pictures back to itunes it says an ipod should only be synced with one itunes library and im supposed to have only one it gives me a choice to erase and sync or tranfer purchases so I click tranfer purchases so I get a error message itunes was unable to load class information from sync services Reconnect or try later I am not sure what to do.
- Transfer iTunes purchases to the computer by:
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
- For other music you need a third-party program like one of those discussed here:
Copy music from Ipod to new computer...: Apple Support Communities
- After all the stuff is on your computer, connect the iPod to yur computer and make a backup by right clicking on the iPod under Devices in iTunes and select Back Up.
- Restore the iPod from that backup. -
I have an iphone 4s and recently purchased a 5 for my wife. When I plug her phone into our computer I'm asked if I want to set up as a new phone or back up. I'm not sure what to do her phone is already set up with an icloud account. Can I sync her phone with the player that I have installed and transfer content to her phone or will my phone be removed from the player?
Set up as new, since it newer has been connected to iTunes. Your iPhone will remain on iTunes. I have 4 different devices on my iTunes with no problems.
And regarding the sync - it will sync whatever you tell it to sync on iTunes. -
I had first registered my iPhone with an old laptop, the computer is no longer functional. I cant now transfer music from my iTunes account to my phone, I am not sure what to do any suggestions?
Iphone will sync itunes content with one computer at a time. If you sync to another, it will erase the current content and replace with content from the new computer.
What have you tried?
What happened? -
I am trying to update my phone so I can save my info on my old phone & get a new phone, but I get a error that says "There was a problem with downloading teh software, the network connection timed out.." HELP! Not sure what my settings shoud be...
I never updated anything until now...I want o update my iPhone to the newest version, but i do not want ot loose all that I have on this phone. I was told I needed to update the operating systems so i can put things into the cloud for transport to new phone, but I am just not sure how to do this..Can you help out here??Dear Jody..jone5
Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
Goodluck
Atousa -
I updated my iPad mini to ios 7.0.2 couple days ago. Everything was fine until yesterday. I noticed that it seemed to have a mind of its own. It kept opening and closing app. I'm not sure what to don to fix this problem. I've tried restoring my iPad mini but that didn't help. Can someone please help me?
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
If no joy...
Reset all settings
Settings > General > Reset > Reset all Settings.
This will return all iDevice settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings.
If the issue persists...
Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download -
We are trying to do a Quick payment from payment workbench and getting 'FRM-41830: List of values contains no entries' error for payment document column/field. Payment document setup looks good. Not sure what the issue is.
Already gone through following three notes but didn't found resolution.
APXPAWKB: FRM-41830 When Clicking on Payment Document LOV (Doc ID 1081305.1)
R12: APXPAWKB: Payment Document Lov Is Empty When Entering A Payment (Doc ID 857587.1)
R12: Payment Workbench Error: FRM-41830 List Of Values Contains No Entries (APXPAWKB.FMB) (Doc ID 1323875.1)
Maybe you are looking for
-
Airport network + 1 admin account + 1 standard account on the same Mac
Hello, I have not succeeded yet in finding in this forum any answer to my problem but I guess this is a quite familiar one and may be some of you could help. My configuration: 1) one Imac G5 Power PC (OS 10.4.6) + 1 Airport Express base station with
-
How long does it take for your ipod to restore
My ipod has been "restoring" for about an hour now. How long is this going to take?
-
Open LMS Session from client host
Dear all, i have a LMS application installed on a server X, the campus manager version is 3.2. the application version is pretty old, but it is just working fine. LMS is opening normally from the server itself. My problem is that if i try to open Cam
-
"Could not deserialize session data" error during sign out
Hello, I have an application deployed on WLS 8.1, one instance, no clustering. The application EAR contains 1 web module and 2 ejb modules. When I try to sign out(I use Single Sign-On for Multiple Applications - a sign out application deployed separa
-
How to see simultaneously two parts of one document
Hello, In word I used to use the simultaneously views of two different parts of one document. How can I do this under Pages 5.0.1 ? Thank you for your response