Not to cancel whole release with 1st level without cancel with higher level
Hi
In case of release of PR or PO I have maintained Release Prerequisite. So I can't release with 2nd level of release code without releasing with 1st level of release code. In case of cancelling release reverse should happen. i.e. I can't cancel release with 1st level of release code without cancelling with 2nd level of release code. But I am able to cancel the whole release with 1st level of release code irrespective of whether I have cancelled release with higher level of release codes or not.
I want this not to happen.
Any suggestion ? Is there any customizing seting to be maintained.
Points assured.
Regds
Amitava
Hi,
My question is still unanswered. Can anybody give any idea? this is urgent.
Similar Messages
-
New release strategy should not trgger for PO released with old Rel Strategy
Hi All,
Please suggest. Po has been fully released with Release Strtgy V1 XX. Now I m replacing release strategy XX with ZZ. If I change any po which has old rel str XX , system will reset new release strategy as in config changeability indicator 4 maintained.
But requirement is if there is any change or value decreasing in fully released Pos with old strategy it should not retrigger new release strategy. If value Increases then New strategy should retrigger.
Please help me on this.
regards,
RohitHI Rohit
A reset of the release strategy only takes place if
- the changeability of the release indicator is set to '4' in
case of a purchase requisition and '4' or '6' in case of
another purchasing document (purchase order, request for
quotation, contract, scheduling agreement),
- the document is still subject to the previous release
strategy,
- the new TOTAL NET ORDER VALUE is higher than the old one.
The most important thing to consider in to avoid changes to release strategy customizing once the release strategy is used.
The commom steps are:
1- make sure all of the old POs should have been released.
2- don't delete/change the original release strategy. create a new release strategy with copy function, then the old release strategy will not be replaced.
3- if you delete the original release strategy and add a new release strategy which the characteristics in classification is same as old release strategy then the PO (have been approved) will be replaced with the new release strategy.
Kind regards,
Lorraine -
IPod not playing re-ripped tunes with higher bit-rates
Since I got my iPod and have more storage I have been slowly re-ripping some of some tunes at a higher bit rate. iTunes doesn't appear to try to sync these songs and re-upload them to the iPod.
What happens is that the song stops playing part-way through the song. My guess is that it is due to the file size of the old (lower) bit-rate, as if it still thinks the EOF is at the same spot even though the file is now larger. It's almost as if the index doesn't get updated properly somehow.
I've tried deleting all the songs on the iPod and even doing a restore, but that doesn't always fix it. Some songs do it, some don't.
I know the rips are good because I can play them all the way through with either iTunes or Media Player.
Any help on getting it to sync them properly?I assume that I have to re-rip the songs at the higher bit rate, unless there is Is there an easy way to do that without re-ripping them.
Assuming you want the higher audio quality (and not just a puffed up version of the same low quality track) you will have to re-rip from the CDs.
Also, what happens to the lower bit rate songs in my playlists, especially if I delete the lower bit rate versions from my library?
Under certain conditions, iTunes will recognize the CD and ask you if you want to replace the existing versions. Say yes, and the rip process will automatically do the replace.
In case it does not ask, just go ahead and rip, and then do the replacements manually. -
I turned my Iphone 4 off. When I went to turn it back on, up popped a silver screen that read Iphone with no service. My service has not been cancelled. What does this mean, please help?
If a reset doesn't work, try and force iPad into Recovery Mode:
1. Turn off iPad. Press and hold the Sleep/Wake button for a few seconds until the red slider appears, slide to turn off.
2. Connect USB cable to computer
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune (make sure you have the newest version of iTune)
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times to recover your iPad -
Connection to AD Share not working past 1st level
10.10.3 client running on a network with a 2008 AD Server. setup 3 computers. 2 work fine and 1 of those is a laptop with a mobile account. The network AD users log into the "other" account and can access the server at the 1st level and sub folders without issue. On the last laptop the setup was the same however the AD user logs in and can only access the same server folder at 1st level. Sub folders are not visible. So I setup a new test user and discovered that the test user can't access the Subfolders either. So it seems to be local to the mac even though they are AD network accounts. Then I setup another local admin account and logged into that and then logged into the server using the ADnetwork account using the DNS address and I could see the 1st level folders but not the subfolders. However connecting to the server share via the IP/share allows viewing of the subfolders. So it would seem that it is a dns issue however on the other computers they all (PC and MAC) access the domainname/Sharepoint with issue. If anybody can shed any light on how I can access the subfolders using the full dns string as apposed to the ip I would be greatful. Again the other computers can access the server via the domainservername/share point.
Thank you.10.10.3 client running on a network with a 2008 AD Server. setup 3 computers. 2 work fine and 1 of those is a laptop with a mobile account. The network AD users log into the "other" account and can access the server at the 1st level and sub folders without issue. On the last laptop the setup was the same however the AD user logs in and can only access the same server folder at 1st level. Sub folders are not visible. So I setup a new test user and discovered that the test user can't access the Subfolders either. So it seems to be local to the mac even though they are AD network accounts. Then I setup another local admin account and logged into that and then logged into the server using the ADnetwork account using the DNS address and I could see the 1st level folders but not the subfolders. However connecting to the server share via the IP/share allows viewing of the subfolders. So it would seem that it is a dns issue however on the other computers they all (PC and MAC) access the domainname/Sharepoint with issue. If anybody can shed any light on how I can access the subfolders using the full dns string as apposed to the ip I would be greatful. Again the other computers can access the server via the domainservername/share point.
Thank you. -
reinstalled my windows operating system and decided to put on windows 8. After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes. My 1st gen ipod nano works with no problem. I can eliminate any problems with the cable and connection.
I've stopped and started the service, and also have performed cold reboots.
Nothing seems to have helped the situation.
Help!See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
iTunes for Windows: Device Sync Tests
Have you tried on another computer to help determine if you have a computer or iPod problem?
The iPod Classic uses different drivers than the Nano -
Received iPad from relative as Christmas gift as they upgraded to mini. I have registered and verified my account. When I try to download apps I
And I put in my password it say I have not verified my account. Apple wants to charge me 19.00 to help me. This is my 1st apple product. So far I am not impressed with the customer service. Can someone please help. I have even done the 2nd step verification and still the same thing. Please help this was a gift for my child and he cannot even use it! Please help!!!Leigh...
but cannot do this because I cannot access Mac App Store
If you can't access the App Store from the Apple menu, Dock, or Applications folder installing the Mac OS X 10.6.8 Update Combo will reinstall the App Store for you.
It's ok to do this even you are already running v10.6.8.
Plants vs. Zombies, and that is all for additional software on here
FYI: Some third party software can cause issues with the App Store > Mac App Store: Sign in sheet does not appear, or does not accept typed text
Apple is not responsible for incompatibility isssues with third party software. -
Is there a way to make an audio clip not cover the whole project in iMovie? I want to add audio clip or song and let it start at a certain point in the project. Whenever I add audio or song it covers the whole project. I'm working with iMovie on IPad!
Thank you for your reply Karsten but unfortunately this didn't help me so far. Or maybe I'm missing something?
First the link is a tutorial for iMovie on a Mac. I'm using iMovie on iPad so the steps are inapplicable.
Second it is only possible for me to manipulate the end part of the sound clip to whichever duration I want. But I can't do the same with the 'beginning' of the sound clip.
I simply want to place some photos in the beginning of my video with no sound in the background then after like 2 secs I want to start the music clip. For some reason that is not possible! Cause every time I drop the music clip unto my project timeline it automatically place it self along with the first frame in the project! And consequently the photos and music are forced to start together.
Hope I'm making sense... -
My photos will not sync to my Apple TV (1st generation), ipad, iphone, or itouch. They used to be there but upon recent syncs with all devices they have all gone. I am totally baffled as I have not changed settings?
I had the same thing happen to me. It's a bug in iPhoto 9.4.2.
The first time you run iPhoto after upgrading to iPhoto 9.4.2, it "updates the iPhoto library". This sometimes tickles a bug where iTunes can see all your iPhoto albums, but iTunes thinks they are empty. Since iTunes thinks all your albums are empty, it dutifully deletes any photos from your synced iOS devices.
It's easy to tell if this is the problem you are seeing. Open iTunes and go to the photos sync panel for one of your iOS devices. If you have multiple albums checked, but iTunes shows a total of 0 photos, then you have the problem.
I spent an hour with an Apple Genius. he couldn't find any mention of this problem in their internal support system. His recomendation was to reinstall the operating the system. I suspect that this won't solve it.
The only solution I have found is to restore iPhoto 9.4.1 and the corresponding iPhoto library from your backups.
I would refrain from upgrading to iPhoto 9.4.2 until Apple has a fix for this issue. -
I have Ethernet in the house and an Wifi that do not cover the whole house. I do not get it to work. I have tried to get it into my network and it get connected via the WiFi but not the Ethernet. Also when it gives a green light I cannot see that it is giving any signals to my devices (iPhone etc).
You need to pay attention to something, while extending your network with the latest AirPort Express upgrade, your devices will be connected to it except your iPhone, you'll see your iPhone always connected to the capsule instead, even if you're at 1 foot from the AirPort Express.
You need to change the radio settings from automatic to 802.11a - 802.11b/g on your capsule, then I put it back to the default settings...
Now in the AirPort utility you should see your iPhone connected to the AirPort -
I was attempting to upload a video to face book and decided to cancel, now I can not get the quicktime icon with Facebook icon embedded to delete? what are steps to clear desktop?
A warm welcome to Apple discussions!
A 2003 iMac cannot support Snow Leopard 10.6; you'd need an Intel processor and that cannot be retrofitted to your Mac. What does "About this Mac" in your Apple menu say for your processor speed? What does it say about how much RAM you have?
If the processor is 1ghz or faster, you can run OS 10.5; otherwise, you are maxed out at 10.4.11.
Also, are you running any commercial ("pay for") anti-virus or security software? They are notorious for slowing most Macs to a fraction of their speed potential.
A too-full hard drive can drag down performance, especially if you don't have a lot of physical RAM installed. If you single-click your hard drive icon and then do command i, you'll see the disk usage. Looks like this:
The value for "Used" should be no more than about 90 percent of "Capacity." In the example image, that drive has about 34 percent of its space used and 66 percent free--more than enough. Please post what you see for your Capacity and Used numbers
There are a few more things we might check but this is a good start.
Awaiting your information,
Allan -
With Sap system Release 7 .0 Level 15 test a service
Hi,
We are using Sap system Release 7 .0 Level 15.
I have created a web service from a function module and want to ask you what is
the easiest shortest way to test this created webservice ?
Regards
ertas ilhanhi ilhan,
u can test the web service from web service test environment,
to do so u use transaction SOAMANAGER in th epage clikc business adminsitration then web service administration , search by service and giev the service name onc eu get the name of it select the service and click applly selection , under overview tab u have open webservice navigator for selected bindign link and u get the test enviornment on it u have test link click it and u get input paramters fill it and test
hope it solves ur query -
Backup Not Starting for 'Whole database offline + redo log backup' @ DB13
Hi Experts,
I am not able to perform 'Whole database offline + redo log backup' by DB13.
I have recently configured my 'init<SID>.sap' to take 'Whole database online + redo log backup' and its working perfectly fine.
I tried taking test backup for 'Whole database offline + redo log backup' but it didn't even started.
Thus I created another profile with name init<SID>back.sap and changed the Parameter
from 'backup_type = online' to 'backup_type = offline' and also tried by 'backup_type = offline_force'
rest all parameters being same as the profile init<SID>.sap
Kindly Suggest as I need to take set the backup Strategy as Mon-Fri -> 'Whole database offline + redo log backup' and Sat -> 'Whole database offline + redo log backup'
One more Query : While taking the redo log backup by DB13 why is it that some times it only saves the Files and some time it
saves and delete the files from the '/oracle/<SID>/oraarch' location. Please throw some light over this matter also.
Thanks,
JiteshHi Mr Bhavik,
Thanks for your reply.. Here are the details you have asked for.
1.My SAP BASIS Patch Level is : 10. ( We shall be updating it by the end of this Year)
2. Br*tools version is :
BRTOOLS 7.00 (11)
kernel release 700
patch level 11
3. I don't have any file with name alert<dbsid>.log file (located at /oracle/<SID>/saptrace/background/) but i do have alert_<SID>.log
I execute the command more -p G alert_JMD.log
after my 'Whole database offline + redo log backup' again failed at DB13 but I was not able to see any specific complains while executing the above action.
I got the Error Detailed Log in DB13 as :
Detail log: beeneedv.aft
BR0051I BRBACKUP 7.00 (20)
BR0055I Start of database backup: beeneedv.aft 2010-11-08 13.16.43
BR0484I BRBACKUP log file: /oracle/JMD/sapbackup/beeneedv.aft
BR0280I BRBACKUP time stamp: 2010-11-08 13.16.43
BR0261E BRBACKUP cancelled by signal 13
BR0056I End of database backup: beeneedv.aft 2010-11-08 13.16.44
BR0280I BRBACKUP time stamp: 2010-11-08 13.16.45
BR0054I BRBACKUP terminated with errors
4. No I have not yet Tried 'execute such Offline+REdo log backups using brback command', will Try and post it Definately
5. Query : select grantee, granted_role from dba_role_privs;
result :
SQL> select grantee, granted_role from dba_role_privs;
GRANTEE GRANTED_ROLE
SYS SAPDBA
SYS EXP_FULL_DATABASE
SYS CONNECT
IMP_FULL_DATABASE SELECT_CATALOG_ROLE
DBSNMP OEM_MONITOR
SAPSR3 CONNECT
OPS$SAPSERVICEJMD SAPDBA
SYS SELECT_CATALOG_ROLE
DBA DELETE_CATALOG_ROLE
DBA EXECUTE_CATALOG_ROLE
SYSTEM DBA
GRANTEE GRANTED_ROLE
OPS$ORAJMD SAPDBA
SAPDBA GATHER_SYSTEM_STATISTICS
SYS SCHEDULER_ADMIN
SYS AQ_USER_ROLE
SYS GATHER_SYSTEM_STATISTICS
SYS DELETE_CATALOG_ROLE
DBA GATHER_SYSTEM_STATISTICS
DBA IMP_FULL_DATABASE
EXECUTE_CATALOG_ROLE HS_ADMIN_ROLE
IMP_FULL_DATABASE EXECUTE_CATALOG_ROLE
OPS$JMDADM CONNECT
GRANTEE GRANTED_ROLE
SYS LOGSTDBY_ADMINISTRATOR
SYS EXECUTE_CATALOG_ROLE
SYS RESOURCE
DBA SCHEDULER_ADMIN
DBA SELECT_CATALOG_ROLE
EXP_FULL_DATABASE EXECUTE_CATALOG_ROLE
SAPDBA SELECT_CATALOG_ROLE
SYS SAPCONN
SYS OEM_ADVISOR
SYS IMP_FULL_DATABASE
SELECT_CATALOG_ROLE HS_ADMIN_ROLE
GRANTEE GRANTED_ROLE
OUTLN RESOURCE
LOGSTDBY_ADMINISTRATOR RESOURCE
SAPSR3 RESOURCE
OPS$SAPSERVICEJMD RESOURCE
SYS RECOVERY_CATALOG_OWNER
DBA EXP_FULL_DATABASE
EXP_FULL_DATABASE SELECT_CATALOG_ROLE
TSMSYS RESOURCE
OPS$ORAJMD RESOURCE
SAPCONN SELECT_CATALOG_ROLE
SYS OEM_MONITOR
GRANTEE GRANTED_ROLE
SYS AQ_ADMINISTRATOR_ROLE
SYS DBA
SYSTEM AQ_ADMINISTRATOR_ROLE
OPS$ORAJMD CONNECT
OPS$JMDADM SAPDBA
OPS$JMDADM RESOURCE
SAPSR3 SAPCONN
SYS HS_ADMIN_ROLE
SYSTEM SAPDBA
OPS$SAPSERVICEJMD CONNECT -
ORA-20100: AppDomain could not be created for the specified security level
We recently updated our development environment to Visual Studio 2010. We have previously deployed (with success) .Net stored procedures from Visual Studio 2005 to our Oracle 10gR2 database. I am currently trying to configure a local instance (called local) of Oracle 10gR2 database to test deployment of .Net stored procedures to Oracle 10gR2 via Visual studio 2010 and ODT version 11.2.0.1.2. I have built the demo from the ode developer guide and gotten as far as deploying it but executing the stored procedures from VS 2010 or SQL*Plus produces the following error...
ORA-20100: AppDomain could not be created for the specified security level
ORA-06512: at "SYS.DBMS_CLR", line 152
ORA-06512: at "SCOTT.GETDEPTNO", line 7
Here is what I have done.
(Server)
1. Installed oracle 10gR2 with ODE.Net
2. Installed Oracle 10gR2 patch set 22
3. Installed ODE upgrade from Oracle Developer Tools for Visual Studio .NET with Oracle 10g Release 2 ODAC 10.2.0.2.21
(Client)
4. Installed Oracle Developer Tools for Visual Studio .NET with Oracle 10g Release 2 ODAC 10.2.0.2.21 (In new client home).
5. Installed patch set 22 on 10g client home.
6. Installed Oracle 11g Release 2 ODAC 11.2.0.1.2 with Oracle Developer Tools for Visual Studio(in new 11g client home, only for VS 2010)
I have made some minor changes (GAC) etc. per the following threads...
ODE.NET 11.1.0.7.20 on 10g Database?!
Re: Error: System.TypeInitializationException
The database appears to be fully functional via TOAD - SQL plus etc. I can't find much on this error but it appears Oracle needs some permissions to launch an ASP.Net application that it does not have. Any help would be GREATLY appreciated, don't hesitate to ask for additional details.The KB article is almost what we have apart from theitalic underlined
part
Consider the following scenario:
You use a domain administrator account to log on to a computer that is running Windows 7 or Windows Server 2008 R2.
You use the Active Directory Users and Computers Microsoft Management Console (MMC) snap-in to connect to a domain controller.
You open the Properties dialog box of a user account.
The user account has sole access to a shared folder path that cannot be accessed by the administrator account.
You set the Remote Desktop Services Home Folderattribute to the shared folder path.
NoteThis attribute is located on the
Remote Desktop Services Profiletab.
You click Apply or OK.
In this scenario, you receive the following error message:
The home folder could not be created because: The network name cannot be found.
Note If you click Apply or OK again, no error message is returned. However, the setting is not saved.
I think the important bit is
The user account has sole access to a shared folder path that cannot be accessed by the administrator account.
We manually create the shares on our NAS and then just want to enter the path in the profile tab, I suppose the question is how to we stop it trying to create the shares ? -
Hi All,
If anybody has worked on PR item release with Work-flow please share the process ...i know how to set up the PR release strategy but not aware of Work-flow setting...If anybody has the document please share......
I searched a lot in the Forum...but not getting the correct information..
Thanks in advanceHi John,
The standard workflow template provided by SAP for PR Release item level is WS00000038. You can view workflow in transaction SWDD. You need to activate this template in basic data from u201Cstart eventsu201D tab.
In order to send notification mails from SAP to other services, such as Outlook, Lotus Notes etc, you need to configure SCOT.
Maybe you are looking for
-
OPEN DATASET FOR OUTPUT IN LEGACY TEXT MODE not working!
Hi All, I need your expertise to help me with my problem. The program passed through the code OPEN DATASET ... FOR OUTPUT IN LEGACY TEXT MODE. Then it gave an error message "Error Accessing File /home/sap/sample.txt". I would like to know what are th
-
Designer 3.1 does not appear to view XI r2 universes correctly
Hi I am new to supporting Business Objects so do not know all the correct terms, sorry. Recently as part of a company upgrade our development server has been upgraded from XI r2 to XI 3.1. Our Business Objects programmer has noticed that when opening
-
Please can anyone help with my registration issue?
Hi - I am having great difficulty registering (and therefore continuing to use) CS6. I purchased this a few days ago and installed.. at the time I could not register as it stated I had no internet connection or my clock was wrong - neither is the cas
-
My ipod is disabled were can i get it fix
how can i get my ipod disabled
-
Wie kann ich eine keynote in der iCloud als PDF oder Powerpoint exportieren?
Wie kann ich eine keynote in der iCloud als PDF oder Powerpoint exportieren?