Not to display certain data in cloums

I have column name project in the BIP rtf template.
When run, it has fields like
-unspecified
0000016772
983000000
-unspecified
-unspecfied
When i run the report I dont want to display all rows which shows -unspecified. I dont want to delete the row but just stop it from displaying...

You can filter out the data using conditional logic or filter out data within the loop. I have sent a reply to the email I received from you. Take a look and let me know if that resolves your issue.
Example: <?for-each:G_1[Column7!='- Unspecified']?>
Hope that helps.
Bipuser

Similar Messages

Infostructure S502 not updated after certain date

There is an infostructure S502. It is not updated after a certain date.
It should be updated after saving in C011N.
This problem seems to have propped up after upgrade to ECC 6.0. Before that it was working fine.

I have tried a lot but still S502 is not properly updated. Basically the field for date i.e SPTAG is empty. Due to this when we try to select from MCRQ based on dates, no data is selected.
Is it because of some setting in MC23?

BEO Calendar not displaying certain dates

Hello
I'm trying to set up a calender which includes, amongst other dates, 30 November 2009. However, because November 2009 spans 6 weeks (1st on week 1, 30th on week 6) the 30th is not displayed.
Is there any way to overcome this as it will mean that I cannot set the reports to run on that date.
Thanks
David

Try a reset. Nothiong is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.

Search Help Not show/display the data

Dear All,
              I have created a search help whith mannual itab of 4 entries. Itab is filled correctly, but when i see in the screen field it show the search help and display no record with the message 4 entries found; but I can't see the data.
pls. guide me what can be the problem
Thanks and Regards,
Sohail

Hi,
If you want to Show the Search help for Particular Field in Screen painter , You must give the Code In PROCESS ON VALUE REQUEST(POV).
ie.
process on value-request.
field P9611-REQ_STATUS module GET_REQ_STATUS.
and in Program Give the internal table Fieldname in Capital Letter while Passing in Fuctional Module.
like.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'REQ_STATUS2'    "internal table field
      dynpprog        = sy-dynnr
      dynpnr          = sy-dynnr
      dynprofield     = 'P9611-REQ_STATUS' "screen field name
      value_org       = 'S'
    TABLES
      value_tab       = req_status_tab "internal table
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.
IF sy-subrc NE 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
With Regards
Kesavaperumal

When using firefox, table lines are displayed in a pdf document when I set them to backround colour not to display borders, can you help?

I am an Web Designer and create PDF files for download from the sites that I develop. I use version 19.0 of Firefox.
Included in these PDF files are tables which display certain data, and I have made some table columns wider with the fill colour the same colour as the table border colour.
Recently table borders have appeared in the filled in areas, which I do not want to happen.
Also the look of the Adobe Reader is different in Firefox. and normal in IE and Opera browser which I also use.
So overall, the the PDF file is not being displayed correctly in Firefox. If I could I would have attached a screen dump of the display error, to help. Can you offer a solution please?

The same problem here, this started with the latest version.
I found a temporal solution which is change the default "previewer" in the Options -> Applications tab
You need to install the Adobe Reader Plugin described [[here|http://support.mozilla.org/en-US/kb/use-adobe-reader-plugin-view-or-download-pdf-files]].

How to Limit the Displaying of Data Using PointTheme over the map

Hi,
I have the following requirement, which i'm trying to implement with <dvt:map & <dvt:PointTheme components.
*The requirement is ... I have a base map, which is being accessed via <dvt:map component. And i'm using point theme to display certain data over the map. Let us consider, over the US map ... i'm displaying 24 points(for each polygonone point .... taking the centroid of each polygon) when the map zoom level is 0.
At this zoom level '0', user can see all 24 points. But when the user start clicking on '+' to Zoom In(Now the zoom level is '1'), at this zoom level user can see only 18 points. User can see the remaining 6 points by dragging the base map to either sides.
This mean, irrespctive of the zoom level the point theme is rendering the all the points over the map. Instead, i would like to display the data specific to the polygons that are visible to the user. At zoom level '0', if the user is able to see all the polygons, then display all 24 points. And at zoom level '1'...if the user is able to see 18 polygons and then display only those 18 points. And if the user tries to see the other polygons data ... user may drag the base map either sides. In that case, the point theme should render data specific to the polygons that the user is able to see.
Similarly, if the user is at zoom level '2'...at this zoom level user is able to see 13 polygons over the IE. so the point theme should render only 13 points specific to each polygon. If the user tries to do dragging the base map either sides...then display the points, specific to the polygons that the user is able to see.
Similarly for other zoom levels ... Please let me know if you require any other information.
Thanks & Regards,
Kiran Konjeti

You'll need to do a little software workaround on the values you read from your counter. But first a little tutorial to explain *why*.
The E-series boards use 24-bit counters. When LabVIEW requests an integer count value, the count is returned in a 32-bit unsigned integer datatype, where the 24 lowest bits represent the value in the board's count register. The upper 8 bits are *always* 0's.
The count register can increment from 0 to 16 million plus (2^24 - 1), then it must "roll over" back to 0 again just like an odometer. Similarly, when it decrements past 0, it next goes to the max value of 2^24 -1 as you observed.
So we need a little software workaround that'll convert (2^24 -1) to (-1) and (2^24 -2) to (-2), etc. The way to do it is to first detect whether the highest bit is a 1. One way is to compare whether the count value is >= 2^23, making sure to use integers to do the comparison. Whenever the value is >= 2^23, subtract 2^24 from it to create your new count value which will then decrement 3,2,1,0,-1,-2,-3, etc. as desired.
Here's a link to a similar explanation. Couple more notes too. First, if this is a continuously rotating encoder, you may still encounter a discontinuity when the revised count value crosses the +/- 2^23 boundary. Second, direct connection of a quadrature encoder to an E-series board isn't recommended because of unrepeatability when measureing direction changes.
-Kevin P.

Cannot display the data from a varaible in front end

hi,
i not able to display the data in the table from the variable.
steps how the module should work.
In OEO:
1. data to be accepted from user, values to be passed to the program in database according to the data accepted.
In Oracle Express:
2. values is accepted in database program as arguments. according to arguments the limits are applied and calculation is made for leaf level and then assigned to variable
3. rollup is called in database program.
In OEO:
4. the data is shown in tables here the user can limit his view of the data according to his needs.
my problem:
the data acceptence from oeo is working fine and the backend or the database part(program, rolllups etc) are working fine. when values are passed thru express command box the program is working fine.
i am not able to get the calculated data form the variable which stores it and display in the table. the database connectivity is fine.
note: the display of data in table is in other page not in the data acceptence page.
pls also let me know how to check in oracle administrator whether the values sent from oeo and accepted in backend properly.
i will be thankfull if any helps me out to solve this problem.
naveen

hi,
i not able to display the data in the table from the variable.
steps how the module should work.
In OEO:
1. data to be accepted from user, values to be passed to the program in database according to the data accepted.
In Oracle Express:
2. values is accepted in database program as arguments. according to arguments the limits are applied and calculation is made for leaf level and then assigned to variable
3. rollup is called in database program.
In OEO:
4. the data is shown in tables here the user can limit his view of the data according to his needs.
my problem:
the data acceptence from oeo is working fine and the backend or the database part(program, rolllups etc) are working fine. when values are passed thru express command box the program is working fine.
i am not able to get the calculated data form the variable which stores it and display in the table. the database connectivity is fine.
note: the display of data in table is in other page not in the data acceptence page.
pls also let me know how to check in oracle administrator whether the values sent from oeo and accepted in backend properly.
i will be thankfull if any helps me out to solve this problem.
naveen

Flash Text not displaying certain fonts

Thanks as always…
I am trying to use Flash text for some headings, but after an
hour of pulling my hair out I've just realised it will only display
certain fonts, such as Helvetica etc.
I added the font I want to use to my font list but it still
does not display…
I'm using MX on OSX 10.3.9.
Any ideas? Thansk.
Flash Text not displaying certain fonts

Fodderstompf wrote:
> Thanks guys,
>
> I don't have Flash MX and it turns out the font is a
Postscript Type 1.
>
> Didn't realise about the true-type thing, bit of
nusiance (and completely the
> opposite of the hassle I normally have with print
work!).
>
> I'm gonna look and see I can get a true-type version of
the font (Tabitha), or
> is there any other work around?
>
> Thanks.
>
>
Is your text in a dynamic text box, or static text box in
flash?
I don't think the issue concerns the "true-type" or not
"true-type" font.
In Flash, when text is part of a dynamic text box (which I
assume is the case in your situation),
then the font works just like in an html page:
if the font is installed on the computer it will show, if
not, it won't. The way around this, is to
embed the font data in the authoring flash file, and link it
to the dynamic text box, via actionScript.
So if you cannot work on the authoring Flash file with Flash
MX or Flash8, and if indeed we're
talking about a dynamic text box, your only option is to use
a web-safe font.
seb ( [email protected])
http://webtrans1.com | high-end web
design
An Ingenious WebSite Builder:
http://sitelander.com

View the .rtf file not display the data in BI Publisher Enterprise.

Hi,
Platform: OBIEE 10g in NT XPsp2
View the .rtf file not display the data in BI Publisher Enterprise.
Step 1, I created Answer-request, create .rtf file with Word and add the request name, Add bar chart and table, preview PDF is working fine with data, Upload this template to Answers, View Template from Answer is working fine with data.
Step 2, Answers – More Products > BI Publisher > My Folders > Create a new report > Edit > Data Model > New > Type: SQL Query > Data Source: Oracle BI EE > Query Builder > from SupplierSales assign Customer, Periods, Sales Facts (select Region, state, Year, Units Shipped) > Results > Save > Save
Click Layouts > New > enter Name ….. > Click Layouts > borrows .rtf file in Manage T file > Upload > Save > Click View
It is showing only the .rtf file without data. Why there is no data?
Please guide me to solve this issue.
Thanks,
Jo

Thanks for you reply,
Our scenario is this report is basically a dissconnected mode report... we are developing these reports for mobile clients.
We dint face this kind of issue while developing other reports.
So please let us know if you have any idea on why we are facing this issue.
Regards,
Maneesh

Strange scenario,Oracle can not display the data in mysql correctly

I use Heterogeneous Service+ODBC to achieve "oracle access mysql"(any other method?),and now i find Oracle can not display the data in mysql correctly:
-------mysql------------
mysql> create table tst(id int,name varchar(10));
Query OK, 0 rows affected (0.00 sec)
mysql> insert into tst values(1,'a');
Query OK, 1 row affected (0.00 sec)
mysql> select * from tst;
------------+
| id | name |
------------+
| 1 | a |
------------+
1 row in set (0.00 sec)
mysql> show create table tst\G
*************************** 1. row ***************************
Table: tst
Create Table: CREATE TABLE `tst` (
`id` int(11) DEFAULT NULL,
`name` varchar(10) DEFAULT NULL
) ENGINE=MyISAM DEFAULT CHARSET=utf8
1 row in set (0.00 sec)
-------------oracle ------------------
SQL> select count(*) from "tst"@mysql;
COUNT(*)
49
SQL> select * from "tst"@mysql;
id
1
SQL> desc "tst"@mysql;
Name Null? Type
id NUMBER(10)

You can make the following query on the result page:
"select * from the_table where movietitle = ? and cinema = ?"
then you set movietitle and cinema to those which the user selected. If the resultset contains more than 0 rows, that means the movie is available.
Below is the sample code, it assumes you have a connection to the database:
PreparedStatement stat = myConnection.prepareStatement("select * from the_table where movietitle = ? and cinema = ?");
stat.setString(1, usersMovieTitleSelection);
stat.setString(2, usersCinemaSelection);
ResultSet res = stat.executeQuery();
if (res.next()) {
out.print("The movie is available");
} else {
out.print("The movie is not available");
}Now just add that to your JSP page. Enjoy ! =)

Data is not getting displayed in the report from an Infoset.

Hi All,
I am having a report based on an infoset. This report is displaying the data in the Dev. envmt. When it is transported to the QA, it is not displaying the data in the BEx as well as RSRT, in the QA envmt. The patch levels of both the Dev. and QA are the same. The Queries are same in the Dev and QA also.
While trying to display the data from the infoset (rt.click- display data), i am able to view the data, in the QA.
Could anyone please suggest why the data is not getting displayed in the query designer.
Thanks & Regards,
A.V.N.Rao

Hi Ashish,
I ran the "ZPS/!ZPS" in RSRT where ZPS is the infoset name. In Dev, it displayed the values. In QA, it displayed the below messages:
ECharacteristic 0TCAKYFNM does not exist. Check authorizations
WThere are calculated elements. These results are bracketed [ ]
and below that, it displayed the values for Number of records. But, it has not displayed the values for the other figures.
Does this has any impact in QA.
Thanks & Regards,
AVN Rao.

Udf Data is not being displayed in the report

Hi all,
i have designed one report in which i am displaying some udf fields along with other system fields.
i have not used any selection criteria.
when i run report it doesn't display udf data of some random rows in the report even if data is peresent in that udf field.
If i open sales order and press 'Shift-F2' and update the document and now if i run report then i get that udf value in the report.
why this happening. data is there in the udf field only its not displayed in the report with out updating the that udf.
pls suggest some solution.
regsrds,
Chetan.

Hi Ashish,
I ran the "ZPS/!ZPS" in RSRT where ZPS is the infoset name. In Dev, it displayed the values. In QA, it displayed the below messages:
ECharacteristic 0TCAKYFNM does not exist. Check authorizations
WThere are calculated elements. These results are bracketed [ ]
and below that, it displayed the values for Number of records. But, it has not displayed the values for the other figures.
Does this has any impact in QA.
Thanks & Regards,
AVN Rao.

Master data is not getting displayed in the Query Designer

Hi,
I have a DSO in which I have an InfoObject called Emp No. in the Data Field.
The Emp.No is being maintained as master with (Emp Name, Address, Telephone No, DOB) as attributes.
I have loaded the data in the Emp. No. master. Then tried loading the transaction data in DSO.
The Emp.No is there in the DSO active data, but in the query designer its not getting displayed.
Hope its clear.
Please help.
Thanks

Hi,
I have brought the Emp. No. in the Key Field and also have activate the master data again.
Yet my Query Designer doesn't have the Emp. No.
I have done a full load for both Master and Transaction.
Please advice me what the other alternative.
Thanks

Not displaying the data in the ALV Microsoft Excel (Ctrl+Shift+F7)..

Hi All,
I can able to display the data through the FM REUSE_ALV_GRID_DISPLAY in the out put screen.When I click on the Microsoft Excel (CtrlShiftF7) at the ALV toolbar to view the same data in excel sheet it does open the excel sheet WITHOUT ANY DATA. Please help me how to make the data visible in the excel sheet.
Can anyone help in this regard.
Thanks & Regards,
Seshadri G

Hi,
Check whether the tool bar export is disabled in the alv.
check in the alv->set_table_for_first_display FM the toolbar exclude export list.
If that is ok, then try download manually by providing abutton and clicking it. You can download data manually in this way.
refer the code below.
DATA: lv_path      TYPE string,
        lv_fullpath TYPE string,
        lc_c         TYPE string,
        v_fnam       TYPE string,
        lc_date(15)      TYPE c.
TYPES: BEGIN OF ts_fieldnames,
            field_name(1000),
         END OF ts_fieldnames.
lc_c = 'C:\'.
WRITE sy-datum TO lc_date.
DATA:lt_fieldnames TYPE STANDARD TABLE OF ts_fieldnames,
       ls_fieldnames TYPE ts_fieldnames,
       lt_fieldnames1 TYPE STANDARD TABLE OF ts_fieldnames,
       ls_fieldnames1 TYPE ts_fieldnames,
       lt_fieldnames2 TYPE STANDARD TABLE OF ts_fieldnames,
       ls_fieldnames2 TYPE ts_fieldnames,
       lt_fieldnames3 TYPE STANDARD TABLE OF ts_fieldnames,
       ls_fieldnames3 TYPE ts_fieldnames,
       lt_fieldnames5 TYPE STANDARD TABLE OF ts_fieldnames,
       ls_fieldnames5 TYPE ts_fieldnames.
CONCATENATE 'ContractAccount'
              'DocumentNumber'
              'Reference/InvoiceDocumentNumber'
              'ClearingDocumentNumber'
              INTO ls_fieldnames-field_name SEPARATED BY
              cl_abap_char_utilities=>horizontal_tab.
APPEND ls_fieldnames TO lt_fieldnames.
CONCATENATE '' ''
              INTO ls_fieldnames5-field_name SEPARATED BY
              cl_abap_char_utilities=>newline.
APPEND ls_fieldnames5 TO lt_fieldnames5.
DATA :    ls_str1 TYPE string,
            ls_str2 TYPE string.
ls_str1 = 'Invoice Clearing Posting'.
ls_str2 = 'Payment On Account Posting'.
CONCATENATE ls_str1 ' :: ' lc_date INTO ls_fieldnames2-field_name.
APPEND ls_fieldnames2 TO lt_fieldnames2.
CONCATENATE ls_str2 ' :: ' lc_date INTO ls_fieldnames3-field_name.
APPEND ls_fieldnames3 TO lt_fieldnames3.
CONCATENATE 'ContractAccount'
              'Reference/InvoiceDocumentNumber'
              'PostOnAccountDocumentNumber'
              INTO ls_fieldnames1-field_name SEPARATED BY
              cl_abap_char_utilities=>horizontal_tab.
APPEND ls_fieldnames1 TO lt_fieldnames1.
CALL METHOD cl_gui_frontend_services=>file_save_dialog
    EXPORTING
      window_title      = 'Select file for download'
      default_extension = '.xls'
      default_file_name = lv_path
      initial_directory = lc_c
    CHANGING
      filename          = lv_path
      path              = lc_c
      fullpath          = lv_fullpath
    EXCEPTIONS
      cntl_error        = 1
      error_no_gui      = 2
      OTHERS            = 3.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
    v_fnam = lv_fullpath.
ENDIF.
IF v_fnam IS INITIAL.
    RETURN.
ENDIF.
IF i_finalclear[] IS NOT INITIAL.
    CALL METHOD cl_gui_frontend_services=>gui_download
      EXPORTING
        filename              = v_fnam
        filetype              = 'DAT'
       HEADER                = header
        append                = 'X'
        write_field_separator = 'X'
      CHANGING
        data_tab              = lt_fieldnames2
      EXCEPTIONS
        OTHERS                = 8.
    CALL METHOD cl_gui_frontend_services=>gui_download
      EXPORTING
        filename              = v_fnam
        filetype              = 'DAT'
       HEADER                = header
        append                = 'X'
        write_field_separator = 'X'
      CHANGING
        data_tab              = lt_fieldnames
      EXCEPTIONS
        OTHERS                = 8.
REgards
sheron

DataGrid does not display XML data

Hello, and thanks for reading this...
I am having a problem displaying XMLList data in a DataGrid.
The data is coming from a Tree control, which is receiving it
from a database using HTTPService.
The data is a list of "Job Orders" from a MySQL database,
being formatted as XML by a PHP page.
If it would be helpful to see the actual XML, a sample is
here:
http://www.anaheimwib.com/_login/get_all_orders_test2.php
All is going well until I get to the DataGrid, which doesn't
display the data, although I know it is there as I can see it in
debug mode. I've checked the dataField property of the appropriate
DataGrid column, and it appears correct.
Following is a summary of the relevant code.
...An HTTPService named "get_all_job_orders" retrieves
records from a MySQL database via PHP...
...Results are formatted as E4X:
HTTPService resultFormat="e4x"
...An XMLListCollection's source property is set to the
returned E4X XML results:
...The "order" node is what is being used as the top-level of
the XML data.
<mx:XMLListCollection id="jobOrdersReviewXMLList"
source="{get_all_job_orders.lastResult.order}"/>
...The "jobOrdersReviewXMLList" collection is assigned to be
the dataProvider property of a Tree list, using the @name syntax to
display the nodes correctly, and a change event function is defined
to add the records to a DataGrid on a separate Component for
viewing the XML records:
<mx:Tree dataProvider="{jobOrdersReviewXMLList}"
labelField="@name"
change="jobPosForm.addTreePositionsToDG(event)"/>
...Here is the relevant "jobPosForm" code (the Job Positions
Form, a separate Component based on a Form) :
...A variable is declared:
[Bindable]
public var positionsArray:XMLList;
...The variable is initialized on CreationComplete event of
the Form:
positionsArray = new XMLList;
...The Tree's change event function is defined within the
"jobPosForm" Component.
...Clicking on a Tree node fires the Change event.
...This passes an event object to the function.
...This event object contains the XML from the selected Tree
node.
...The Tree node's XML data is passed into the positionsArray
XMLList.
...This array is the dataProvider for the DataGrid, as you
will see in the following block.
public function addTreePositionsToDG(event:Event):void{
this.positionsArray = selectedNode.positions.position;
...A datagrid has its dataProvider is bound to
positionsArray.
...(I will only show one column defined here for brevity.)
...This column has its dataField property set to "POS_TITLE",
a field in the returned XML record:
<mx:DataGrid width="100%" variableRowHeight="true"
height="75%" id="dgPositions"
dataProvider="{positionsArray}" editable="false">
<mx:columns>
<mx:DataGridColumn width="25" headerText="Position Title"
dataField="POS_TITLE"/>
</mx:columns>
</mx:DataGrid>
In debug mode, I can examine the datagrid's dataProvider
property, and see that the correct XML data from the Tree control
is present. However, The datagrid does not display the data in any
of its 6 columns.
Does anyone have any advice?
Thanks for your time.

Hello again,
I came up with a method of populating the DataGrid from the
selected Item of a Tree Control which displays complex XML data and
XML attributes. After the user clicks on a Tree branch, I call this
function:
public function addTreePositionsToDG(event:Event):void{
//Retrieve all "position" nodes from tree.
//Loop thru each Position.
//Add Position data to the positionsArray Array Collection.
//The DataGrid dataprovider is bound to this array, and will
be updated.
positionsArray = new ArrayCollection();
var selectedNode:Object=event.target.selectedItem;//Contains
entire branch.
for each (var position:XML in
selectedNode.positions.position){
var posArray:Array = new Array();
posArray.PK_POSITIONID = position.@PK_POSITIONID;
posArray.FK_ORDERID = position.@FK_ORDERID;
posArray.POS_TITLE = position.@POS_TITLE;
posArray.NUM_YOUTH = position.@NUM_YOUTH;
posArray.AGE_1617 = position.@AGE_1617;
posArray.AGE_1821 = position.@AGE_1821;
posArray.HOURS_WK = position.@HOURS_WK;
posArray.WAGE_RANGE_FROM = position.@WAGE_RANGE_FROM;
posArray.WAGE_RANGE_TO = position.@WAGE_RANGE_TO;
posArray.JOB_DESCR = position.@JOB_DESCR;
posArray.DES_SKILLS = position.@DES_SKILLS;
positionsArray.addItem(posArray);
So, I just had to manually go through the selected Tree node,
copy each XML attribute into a simple Array, then ADD this Array to
an ArrayCollection being used as the DataProvider for the DataGrid.
It's not elegant, but it works and I don't have to use a Label
Function, which was getting way too complicated. I still think that
Flex should have an easier way of doing this. There probably is an
easier way, but the Flex documentation doesn't provide an easy path
to it.
I want to thank you, Tracy, for the all the help. I checked
out the examples you have at www.cflex.net and they are very
helpful. I bookmarked the site and will be using it as a resource
from now on.

Not to display certain data in cloums

Similar Messages

Maybe you are looking for