Not to exceed manufacturer supported memory

Hi! I have a HP mini 210-1000 and it has a 1gb of RAM.
Ofcourse having this much limited of RAM you'll certainly lose your patience.
Thats why I wanted to upgrade it. According to some answers here that I can upgrade it till 2gb, then I've read about using this site -- www.crucial.com to know all the requirements of the memory to be installed, which I tried then and Im not sure what's the statement is talking about-- "Not to exceed manufacturer supported memory" does this means that I can't upgrade my RAM?
Your replies would be highly appreciated. thanks

Hi:
Below is the link to the service manual for your model.
Memory upgrade info can be found in chapter 1 on page 1.
http://h10032.www1.hp.com/ctg/Manual/c01988326
You remove the 1 GB memory module and replace it with a 2 GB PC2-5300 memory module.

Similar Messages

Can any java process exceed the maximum memory allocated

Hi,
I have a basic question on the memory settings. Assume I have a java process where the memory settings are like:
-Xmx1024m
where the server capacity is say 8GB Then can the process exceed the allocated memory of 1GB and go further say upto 4 GB.
If above thing is possible, how can we limit the process not to exceed the given limit? What settings need to be used.

Krish8 wrote:
Hi,
I have a basic question on the memory settings. Assume I have a java process where the memory settings are like:
-Xmx1024m
where the server capacity is say 8GB Then can the process exceed the allocated memory of 1GB and go further say upto 4 GB.
If above thing is possible, how can we limit the process not to exceed the given limit? What settings need to be used.Yes the used memory can exceed that if you e.g. are using memory mapped files. Don't know if you can restrict it unless your OS has some kind of support for it.
Kaj

Why is the Planned quantity in MCP9 not appearing(Repetitive Manufacturing)

Sub:WHY IS THE PLANNED QUANTITY IN MCP9 NOT APPEARING(REPITITIVE MANUFACTURING
Why are the planned orders not displayed anymore. They are still in the system - in MD04 - but since we moved from release 3.1i to 4.0 the plan order qty disappeared from transaction MCP9!!!!.Now we are using Version 4.7
There must be a reason
Perhaps searching in SAP OSS system -if the transaction is not supported in rel 4.0 anymore and we should use something else instead
Or we need to apply an OSS note from SAP to repair the problem...
Or the info system update must be modified because of rel change... I don't know.
Please suggest your valuable guidance,Iam not able to enclose a screenshot of the problem,planned qty is 0 or it is not getting displayed.If you reply to this query i can send a detailed analysis to that mail id .

Dear Guruji Mr.Rajesha vittal,
Sir ,iam stuck with this problem,not able to proceed.
Can i send the activites i have completed till now ,I want your e mial id sir for me to send the attachments to you.
Also i dont know how to award points i need to award points to u for all the solutions i have recieved till now ,can you please explain to me
I am stuck with this MCP9 problem i have done it according to your suggestion,but still the planned quantities are not displayed. can you please help me out.Very urgent. I need u mail id
Thanks & Awaiting your reply
P.S.KIRAN
[email protected]
[email protected]

The selected driver is not applicable to any supported platforms. 2012 R2 U1 for Windows 8.1 x64

When trying to import the drivers from the Windows 8.1 x64 Dell E6330 SCCM CAB to our SCCM 2012 R2 U1 server, we receive the error "The selected driver is not applicable to any supported platforms" on a number of drivers.
Specifying the same source directory to the test Windows 8.1 Ent x64 computer via the install driver wizard in Device manager finds and installs the missing drivers successfully (Bluetooth 4.0 Module and STMicroelectronics 3-axis Digital Accelerometer).
The manufacturer section of those drivers looks like this:
bcbturms-win8x64-brcm.inf
[Manufacturer]
%MfgName%=Broadcom, NTamd64.6.3, NTamd64
st_accel.inf
[Manufacturer]
%STM%=ST,NTAMD64
Any idea how I can successfully import these drivers?

Thanks for the suggestion, but the results are the same. The Grabber runs without error, but the injector errors with "Error in ConfigMgrDriverInjector.CheckIfDriverExists The SMS Provider reported an error." So I attempted to import the drivers from the
injector's configured drivers source folder and received the exact same error I receive when attempting to import them from the Dell cab.
Relavent part of the DirverInjector log below:
<![LOG[Starting drivers import processs]LOG]!><time="9:50:20.000+000" date="7-16-2014" component="ConfigMgrDriverInjector.IntegrateDrivers" context="" type="1" thread="" file=""
<![LOG[Current folder : Bluetooth]LOG]!><time="9:50:20.000+000" date="7-16-2014" component="ConfigMgrDriverInjector.ImportDrivers" context="" type="1" thread="" file=""
<![LOG[Current subfolder : Dell Wireless 380 Bluetooth 4.0 Module]LOG]!><time="9:50:20.000+000" date="7-16-2014" component="ConfigMgrDriverInjector.ImportDrivers" context="" type="1" thread="" file=""
<![LOG[INF file found : oem14.inf]LOG]!><time="9:50:20.000+000" date="7-16-2014" component="ConfigMgrDriverInjector.ImportDrivers" context="" type="1" thread="" file=""
<![LOG[Driver version found : 12.0.0.7820]LOG]!><time="9:50:20.000+000" date="7-16-2014" component="ConfigMgrDriverInjector.ImportDrivers" context="" type="1" thread="" file=""
<![LOG[Checking driver existence]LOG]!><time="9:50:20.000+000" date="7-16-2014" component="ConfigMgrDriverInjector.ImportDrivers" context="" type="1" thread="" file=""
<![LOG[Error in ConfigMgrDriverInjector.CheckIfDriverExists The SMS Provider reported an error.]LOG]!><time="9:50:20.000+000" date="7-16-2014" component="ConfigMgrDriverInjector.CheckIfDriverExists" context="" type="3" thread="" file=""
<![LOG[Error in ConfigMgrDriverInjector.CheckIfDriverExists The SMS Provider reported an error.]LOG]!><time="9:50:21.000+000" date="7-16-2014" component="ConfigMgrDriverInjector.CheckIfDriverExists" context="" type="3" thread="" file=""
<![LOG[Checking driver existence]LOG]!><time="9:50:21.000+000" date="7-16-2014" component="ConfigMgrDriverInjector.ImportDrivers" context="" type="1" thread="" file=""
<![LOG[Error in ConfigMgrDriverInjector.CheckIfDriverExists The SMS Provider reported an error.]LOG]!><time="9:50:21.000+000" date="7-16-2014" component="ConfigMgrDriverInjector.CheckIfDriverExists" context="" type="3" thread="" file=""
<![LOG[Driver not foud, a problem occurred during the import process]LOG]!><time="9:50:21.000+000" date="7-16-2014" component="ConfigMgrDriverInjector.ImportDrivers" context="" type="2" thread="" file=""
<![LOG[End of driver is import process]LOG]!><time="9:50:21.000+000" date="7-16-2014" component="ConfigMgrDriverInjector.ImportDrivers" context="" type="1" thread="" file=""

I own a iPhone 2G Today He underwent updated Software He gave me this message "The SIM card inserted in this iPhone does not appear to be supported. Only compatible SIM cards from a supported Carrier may be used to activate iPhone. Please insert the SIM

I own a iPhone 2G Today
He underwent updated Software
He gave me this message
"The SIM card inserted in this iPhone does not appear to be supported.
Only compatible SIM cards from a supported Carrier may be used to activate iPhone. Please insert the SIM card that came with your iPhone or visit a supported Carrier's store to receive a replacement SIM card.
I did not know what to do??

Follow this article: iPhone: Troubleshooting No Service or No SIM
Symptoms
In certain situations, iPhone may present one of the following symptoms:
"Invalid SIM" or "No SIM Card installed" alert appears intermittently.
Status bar displays "No SIM" when a SIM card is installed.
Resolution
If you encounter any of the above symptoms on your iPhone, try these steps to attempt to resolve the issue:
Update your iPhone to the latest version of iOS.
Toggle Airplane mode On and Off.
Try turning iPhone off and then on again.
Check for a carrier settings update. Tap Settings > General > About. If an update is available, a prompt will appear.
Remove the SIM Card and verify that it is a valid, carrier-manufactured SIM. Also verify that it is not damaged, worn, or modified. Then reinsert it.
Restore the iPhone.
If you still are unable to resolve this issue, contact Apple support for further assistance.

Did MacBook Pro (15-inch, Mid 2010) support memory: 8GB 1333MHz DDR3

Did MacBook Pro (15-inch, Mid 2010) support memory: 8GB 1333MHz DDR3??

The correct RAM specifications for your 2010 MBP are: 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM.
What you quote may or may not work, and if it does seem to work, it may not work correctly. For one to deviate from the correct specifications often leads to unnecessary complications. One only has to explore many posts on this subject on this forum.
Best places to get RAM for your MBP are from OWC or Crucial.
Note, I have a 2010 MBP and I have made said upgrade.
Ciao.

Can standard workbooks for Process Manufacturing support descriptive Flex?

Can standard workbooks for Process Manufacturing support descriptive Flexfields in Discoverer 10i??
I'm not sure if that is so, and I wouldn't want to create views and folders and then realizing that it could've been done in a standrard fashion.
Can anyone help me please. My email is [email protected]
Thanks
Rafael

Hi,
The question is too generic. Can be specific with examples?
To answer your query, every movement of the goods at stage of WIP can be analysed with the conversion costs incurred till that stage using operation wise confirmation in SAP ECC 6.0. IT support required would that of SAP consultants from modules PP, MM and CO.
Best Regards
Vimal Vijayan

Does Repetitive Manufacturing Supports CO-Product Costing as well.

Please can any one answer whether Repetitive Manufacturing supports the C-Products costing.
I have 6 Co-Products coming out of my process and cost of all should be calculated and shall be taken as benefit for Main product costing.
Thanks and Regards
Khadeer

Hi,
Are you asking whether SAP PP module support co-product as compare to PP-PI module?
Yes, SAP PP module support co-product, in the BOM item basic data screen (CS01/CS02) you can indicator whether the item is a co-product or not. You should post this to PP forum instead of MM forum.
best regards,

MSI B75IA-E33 supported memory

I'm looking for some memory kits to be used with my MSI B75IA-E33. I have my eyes on:
G.Skill 1.35v F3-12800CL7D-4GBECO
Corsair 1.35v CML8GX3M2A1600C9W
Kingston 1.35v KHX1600C9D3LK2/8GX
Kingston 1.35v KHX1866C9D3LK2/4GX
All of those are low voltage variants. Can they be used flawlessly with the B75IA-E33?
I have checked the supported memory list, and they are not listed (msi.com/file/test_report/TR10_2673.pdf).
However, a low voltage G.Skill Sniper 1.25v F3-12800CL9D-8GBSR2 is listed and supported.

Quote
1. Is the default voltage normal? Because it's constantly changing between 1.472 V and 1.488 V (just those 2 numbers, nothing in between).
This isn't a problem.
Quote
2. How can I set it to the advertised 1.35 V? I have checked the BIOS and found out that I can change the Voltage to 1.35 V, but I'm not sure that's all that has to be done. Do I have to adjust the frequency as well?
Enable XMP in bios to get it to run at the advertised 1600.
You can set the voltage in the OC section of bios. DRAMV: 1.35

Does apple make an adapter to support memory stick

Does apple make an adapter that will support memory stick

The camera connection kit will allow you to plug in a memory stick, but you can't do anything with it. The only protocols the iPad supports is the reading of photos or videos off a card/memory stick (and I've literally had a 50/50 success rate getting memory sticks that work, most trigger the 'needs too much power' warning and won't function)
There are some gadgets like the iDrive or iFlash or Seagate's GoFlex, but they have limited function and expandability. Generally, the memory you have is the memory you have and it's not expandable.

HT204266 My iPad (version 1, IOS 5.1) has quit connecting with the store. I am unable to update or buy any app. I did a reboot and a reset with deleting the data. I can not find anything in support for this problem. Any help will be appreciated.

My iPad (version 1, IOS 5.1) has quit connecting with the store. I am unable to update or buy any app. I did a reboot and a reset with deleting the data. I can not find anything in support for this problem. Any help will be appreciated.

My iPad (version 1, IOS 5.1) has quit connecting with the store. I am unable to update or buy any app. I did a reboot and a reset with deleting the data. I can not find anything in support for this problem. Any help will be appreciated.

Multitasking on iPod Touch 4G, running iOS 6.1.2, nearly impossible. Opened, background apps do not seem to stay in memory and must "reload" every time I switch back to them. Also, intense battery drain (imo).

Let's say I'm playing Words with Friends, and also Angry Birds. I may want to go back and forth between the two. When I do so, the app that was in the background needs to reload again. There is no quick access or ability to quickly resume where I left off. And the reloading means that the app restarts from its opening screens...so if I was working on a level, I have to start all over again. And quite often, a game like Angry Birds will lag greatly when I first open it...moving almost in slow-motion.
I don't know if this is typical behavior when playing multiple games, or if I have an issue with my device. I've rebooted and even reset and restored, all to no avail.
There doesn't appear to be as much of an issue if I'm playing one game but also have the music player open, or Safari, Notes, Reminders, etc. Those will resume just fine, though there may be some lag when opening/re-opening them.
So I guess the problem seems to lie within 3rd party apps, and not the apps that are part of the iPod/iOS.
The other problem is battery drain. I do all of my music listening via Bluetooth, so I expect that to have a greater impact than if I were using plugged in headphones, and I have location services turned on. But I have most notifications turned off, all email accounts set to manual and not push, screen brightness turned down and auto brightness turned on, "ask to join networks" turned off, auto-lock is set to 2 minutes but I almost always turn off the screen immediately after setting up my music listening (since I do so at work), volume limit turned on, EQ turned off, sound check turned off,
With these settings, my battery can drain 20% or more within 10-15 minutes of game play. And these are not what I would consider memory intensive games--just Words and Angry Birds.
I've installed (and recently uninstalled) a couple of battery meters from the Apple Store as well--freebies. Carat, Battery Doctor, Battery HD, Battery Magic.
Carat and Battery Doctor seemed to offer the most pertinent and accurate information so the others were uninstalled long ago.
The Accelerate tab in Battery Doctor show the amount of memory in use, and the amount of available memory. The vast majority of the time, the memory in use is approximately 94%. I will occasionally choose to "accelerate" which supposedly frees up memory, but this "bump" lasts only a brief time and I'm not sure it's a great idea.
Even with absolutely nothing open or running, my used memory is generally still above 80%.
Carat, if anyone is familiar with it, shows a J-Score. My J-Score is 17, which means that my performance (according to Carat, anyway) is better than only 17% of the users who have Carat installed. In other words, 83% of people are getting better performance from their devices. It also has "battery hog" and "battery bug" sections. It doesn't detect any hogs or bugs.
I use my iPod Touch in rather limited ways. A typical day consists of approximately 5 hours of music listening via Bluetooth and 30 minutes to 1 hour of playing the aforementioned games. The occasional note and reminder, perhaps a brief check-in with the weather, and that's about it. And wifi is in use only when at home (there is no hotspot at work). Still, I need to charge it every day. I'd be keen to do more with the iPod if I could count on it to last more than a day.
I've read up on multiple forums and blogs for tips on prolonging a battery charge, and believe I've taken everything into account, and applied whatever I could. I've even reset the network settings and try to discharge the battery completely once a month (for supposed battery calibration).
I'm really hoping people can offer some suggestions or comments on whether this is typical behavior or if my battery is going, or even offer some additional tips.
With iOS 7 on the horizon, I'm hoping the upgrade will offer some resolutions (I've read there is better multitasking), but considering how weakly my device performs at this point, I'm not entirely convinced that an iOS upgrade will actually make any improvements.
Thanks a lot for reading.

No, the app does not have to completely restart. It gets shifted in its open state into storage. Similar to how a computer uses the hard disk when it has insufficient memory.
What complicates things is that sometimes memory does not get returned for reuse when you close an app. Thus yo should periodically double click the Home button and "delete" unnecessary apps from the multitasking dock and power off and then back on the iPod.

I have a mac mini mid 2011, this device have; 2,3GHz and 2 Gb Memmory.I want to upgrade the memory and i need the list of supported memory modules

i have a mac mini mid 2011, this device have; 2,3GHz and 2 Gb Memmory.I want to upgrade the memory and i need the list of supported memory modules. i am from turkey.

Welcome to Apple Support Communities
The Mid 2011 Mac mini supports 8 GB of memory officially, but you can install up to 16 GB of RAM, so you can use 2, 4 and 8 GB modules. You can buy more RAM from OWC or Crucial.
If you are looking for memory at a local shop, make sure you buy 1333 MHz DDR3 memory. See > http://support.apple.com/kb/HT4432?viewlocale=en_US&locale=en_US

THE SIM CARD INSERTED IN THIS IPHONE DOES NOT APPEAR TO BE SUPPORTED.....

Hello. I bought on Dec. 17th 2007 at Orange shop in Beausoleil (south France) an iPhone with the option of unlocking the Sim (100 Euro plus). I followed all instructions. Everything was perfect, on Dec. 24th I was able to unlock the iPhone and used with Orange sim, MonacoTelecom sim and Vodafone sim. BUT the iPhone had a problem: when in sleep mode it did't received calls. So Afer 24 hours I stopped to use, UNSAFE. After Christmas holidays I called Apple assistance, they send me UPS and I returned iPhone to Apple (Jan. 4th 2008). I received a NEW iPhone on Jan. 8th 2008, VERY RUSH. Perfect service, I thought (...making terrible error...). The iPhone was LOCKED and I wasn't able to use. Now starts all the problems and for this reason I'm writing.
I called Apple and Orange many times. Orange didn't received the documents from Apple for the changing of IMEI and Serial, for them I had the first iPhone. After many cals finally I asked Apple to send something official for the changing.
....Days goes on and on.......
Every day two times I called Orange, but evert time I received different versions of my situation. Everyday I tried to restore the iPhone but still simlocked.
On Jan.15th after a meeting with a lawyer I decided to make pression to Apple: infact I returned them an unlocked iPhone and I received back a locked one.
I finally was able to speak with a "supervisor" (Mr. F...) and he tried to solve the problem.
On Jan. 16th I spoke with another "supervisor" (Mr. J...) and he told me to make another time the restore, because they changed the firmware.
From now I tried to make the restore many times with Orange sim. Everything seems to go well but when I put another sim on iTunes there is a white page with:
"THE SIM CARD INSERTED IN THIS IPHONE DOES NOT APPEAR TO BE SUPPORTED. Only compatible SIM cards from a supported Carrier may be used to activate iPhone. Please etc etc....".
So the iphone is locked!!! Maybe is country locked, I don't know.
Incredible, unbelievable.
From Apple they told me to wait someting from US, but until now ..... nothing, I received no news from Apple.
The bad situation is that after more than 30 days after the buy I am not able to use the hardware I bought!
I hope that someone from Apple can read this post (sorry if is so long, but with this details I think that in Apple can understand the problem).
I send in warranty an hardware with certain features that I payed to Apple and I received back it with different features.
That's not serious.
After many days, next week I think to go by legal means if Apple France is'nt able to solve the issue.
Many thanks if someone from Apple read my post.
Many thanks if someone help me.

But who has to make another unlock? Orange told me that for them is ok and the phone is unlocked. I read on other pages that Apple has a world-database with Imei numbers. So seems Apple can also do the unlock, even for the fact that they returned me a locked phone, different from the one I sent them. The warranty is with Apple, I forgot to warite in my first post that first of all on Janauary I went to Orange shop where I bought the iPhone but they told me for every problem is Apple that has to solve.

ORA-01034: ORACLE not available ORA-27101: shared memory realm does not exi

Hi all,
suddenly our oracle 10g database stopped working. When we tried export the database following was the output
C:\Documents and Settings\Administrator>EXP PMIS/PMIS FILE=C:\PMIS.DMP
Export: Release 10.2.0.1.0 - Production on Wed Mar 25 16:15:08 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
EXP-00056: ORACLE error 1034 encountered
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
EXP-00005: all allowable logon attempts failed
EXP-00000: Export terminated unsuccessfullyalert log file had the output as
Wed Mar 25 16:02:12 2009
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:>sessions = 49
>__shared_pool_size = 71303168
>__large_pool_size = 8388608
>__java_pool_size = 4194304
>__streams_pool_size = 0
>spfile = C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DBS\SPFILEXE.ORA
>sga_target = 146800640
>control_files = C:\ORACLEXE\ORADATA\XE\CONTROL.DBF
>__db_cache_size = 58720256
>compatible = 10.2.0.1.0
>db_recovery_file_dest = C:\oraclexe\app\oracle\flash_recovery_area
>db_recovery_file_dest_size= 10737418240
>undo_management = AUTO
>undo_tablespace = UNDO
>remote_login_passwordfile= EXCLUSIVE
>dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
>shared_servers = 4
>job_queue_processes = 4
>audit_file_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\ADUMP
>background_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\BDUMP
>user_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\UDUMP
>core_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\CDUMP
>db_name = XE
>open_cursors = 300
>os_authent_prefix =
>pga_aggregate_target = 41943040
PMON started with pid=2, OS id=1632
PSP0 started with pid=3, OS id=1312
MMAN started with pid=4, OS id=200
DBW0 started with pid=5, OS id=1864
LGWR started with pid=6, OS id=188
CKPT started with pid=7, OS id=1328
SMON started with pid=8, OS id=1848
RECO started with pid=9, OS id=1760
CJQ0 started with pid=10, OS id=1920
MMON started with pid=11, OS id=768
MMNL started with pid=12, OS id=948
Wed Mar 25 16:02:13 2009
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Wed Mar 25 16:02:13 2009
alter database mount exclusive
Wed Mar 25 16:02:17 2009
Setting recovery target incarnation to 2
Wed Mar 25 16:02:17 2009
Successful mount of redo thread 1, with mount id 2563569989
Wed Mar 25 16:02:17 2009
Database mounted in Exclusive Mode
Completed: alter database mount exclusive
Wed Mar 25 16:02:17 2009
alter database open
Wed Mar 25 16:02:18 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_lgwr_188.trc:
ORA-00600: internal error code, arguments: [3700], [1], [15], [2], [2], [], [], []
Wed Mar 25 16:02:18 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_lgwr_188.trc:
ORA-00600: internal error code, arguments: [3700], [1], [15], [2], [2], [], [], []
Wed Mar 25 16:02:18 2009
LGWR: terminating instance due to error 470
Wed Mar 25 16:02:19 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_dbw0_1864.trc:
ORA-00470: LGWR process terminated with error
Wed Mar 25 16:02:19 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_ckpt_1328.trc:
ORA-00470: LGWR process terminated with error
Wed Mar 25 16:02:19 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_psp0_1312.trc:
ORA-00470: LGWR process terminated with error
Wed Mar 25 16:02:19 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mman_200.trc:
ORA-00470: LGWR process terminated with error
Wed Mar 25 16:02:19 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_pmon_1632.trc:
ORA-00470: LGWR process terminated with error
Wed Mar 25 16:02:19 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_reco_1760.trc:
ORA-00470: LGWR process terminated with error
Wed Mar 25 16:02:19 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_smon_1848.trc:
ORA-00470: LGWR process terminated with error
Instance terminated by LGWR, pid = 188Again when we tried by connecting sqlplus following was output
SQL> connect sys/manager as sysdba
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 146800640 bytes
Fixed Size 1286220 bytes
Variable Size 83890100 bytes
Database Buffers 58720256 bytes
Redo Buffers 2904064 bytes
Database mounted.
ORA-03113: end-of-file on communication channelWe actually need database dump for user PMIS, any help would be highly appreciated

Hi Wim
You should say that "It may be Control File problem", but you shouldn't say that "it's due to Control File" problem
Please refer to Errors Documentation for more information on ORA-00600
http://download.oracle.com/docs/cd/B19306_01/server.102/b14219/e0.htm#sthref371
ORA-00600: internal error code, arguments: [string], [string], [string], [string], [string], [string], [string], [string]
Cause: This is the generic internal error number for Oracle program exceptions. This indicates that a process has encountered an exceptional condition.
Action: Report as a bug - the first argument is the internal error number
Kamran Agayev A. (10g OCP)
http://kamranagayev.wordpress.com

Not to exceed manufacturer supported memory

Similar Messages

Maybe you are looking for