Not to filter values in Bex Analyzer

I am using a selection on a particular variable in Bex. Now in the output if I enter the value 123 for the variable it shows records only related to 123.
Whereas I need to show some records which dont have a value equal 123 alongwith 123.
basically all the records which are present in the E_T_DATA.
Thx

Hi Raja Sekhar,
If i enter variable 123 or any other value, i need it as a reference for some calculations and data which i get includes this value as well as other values.
So since i have a selection on this variable only 123 shows up in the output, rest of the values getting filtered out.
Is it clear now?
Right what Mahesh has suggested dummy variable seems to the way to go forward, as if i use using text variable i am not allowed to modify any customer exits.
But plz help if u can think of some alternatives
Regards,
Nitin

Similar Messages

  • How to Add a New Filter Value in BEx WAD to Display All Result

    Hi experts,
    I want to add a new filter value in BEx WAD to display all data records. The scenario is as follows:
    The status field can have two values: Active ("A) and Inactive ("I").
    But the requirement is to have a third value to display all the data records (Active + Inactive). E.g. the value can be "G". The purpose is to increase the understandability for report users.
    Does anyone have an idea?
    Regards,
    Joon

    Hi Vineet,
    thanks for your reply. The problem is that there are only 2 values available for this Characteristic: "A" or "I".
    The requirement is to have a third value "G" (instead of the default "All Value") due to historical reason, because all future report users have been working with R/3 reports for quite some time and they are accustomed to using "G" for displaying all values.
    Is there any possibility to realize this?
    Thanks,
    Joon

  • User not able to login to Bex Analyzer

    Dear Experts,
    The user was facing the problem where he was not able to login to Bex Analyzer in only Quality system.
    He was able to login in Dev and Prod systems.can i please have the reason for the same.
    Regards,
    Sunil Kumar.B

    Hi  SunilKumar ,
    RFC connection error issue was stated by you. Basis team takes care when RFC issue occurs. But you are able to login for the same system so RFC Connection should not be the issue.
    Regarding the point of user being unable to login  ; it may be due to authorization issue which is also handled by basis team. So I suggested you to take their help and find out if the user is having the proper authorizations for the quality system as well.
    Regards,
    Arpit

  • How to enter multiple values in BEX Analyzer 7.0

    We are on 7.0.  I created a query in Query Designer with a variable type of Select Option.  When I execute the query in BEX Analyzer, how do I enter multiple selections?
    Thanks.
    Ryan

    Hi Ryan,
    You need to click on the button on the right of the variable (with a white square). In the box that pops up, choose your values. On the same screen, click the More>> button to see your selection and change the order if required.
    Hope this helps...

  • CKF not showing correct results in BEx Analyzer

    Dear Friends,
    I am getting different results when viewed from BEx Analyzer and Web Analyzer for the same query. BEx Analyzer shows incorrect results. The column that is showing different is a local formula (say Formula3) that is a result of dividing Formula1 by Formula2.
    BEx Web calculates Formula3 correctly while BEx analyzer does not.
    I am in BI 7.0 SP 10.
    Any Clues?
    Thanks
    Viren

    For this calculated column set aggregation level as sum.

  • Maximum number of filter values in BEx web

    Hi
    Is it possible to change the maximum number of filter values displayed when running a query?
    Example: When the user runs a query and has to put in a material number, he pushes the button which shows him the possible values for input. The number of values displayed per page is 14 and the maximum number of pages is 72. The maximum number of values is 1000. If the user tries to search, he only searches amongst the 1000 possible values. Is it possible to change the number of possible values shown to unlimited?
    We use NW04s BI SP09.
    Kind regards
    Erik

    Hi Experts
    I have the same problem , the maximum number of hits si set to 200 , ant the variable contains over 300 values , it is a variable based on  a time charactersitic , and the values appear in ascending order , i mean the first 01.1900 , and the last value 03.2012 . i wonder if there is a way to change the order of sort  to descending order . I mean the  first value 03.2012 and the last one 01.1900 . I attach the image .
    Thanks for your help.

  • Values in Bex Analyzer are too big

    Hi all,
    I have upgarded office 2003 to 2007. And when I run a query in bex analyzer some coulmns are mulltiplied by 1000 and some others multiplied by 10 power 14. If I run same query in WEB I get correct result. Also my coullegue get correct result in Bex with excel 2003.
    Do you have any idea what can be wrong?
    regards,
    BB

    Hello,
    Install SAP GUI 7.10 with the latest patches.
    Regards,
    Jorge Diogo

  • Display Filter Values in BEx Report

    I have a BW query that has a dimension (Unit of Measure, UoM) in the filter area.  The user can only select one value for UoM.  The user selects "Z03" which corresponds to a UoM text value of "lb/1000 gal". How do I  display "lb/1000 gallons" at the top of the BEx report. 
    If this is not possible, I would like to at least display the value Z03 at the top of the report.  I prefer not to devote a whole column in the BEx report to UOM, since the user can only select one UOM.  I am new to BW and this is my first posting.

    Hi Jeff,
    if you have a variable for UoM you can add the value/text of the variable via textvariable to the query title.
    Please ask if you need more advice on this.
    Regards
    Marcus

  • WAD 2004s Analysis Item Row Select RRI_RECEIVER does not pass Filter values

    I have created an Analysis item and using a Data Provider that has a Sender-Reciever entry for it. I created a Command on the Row Selection Activation that does an Report to Report (RRI) jump to another web page(template or app whatever sap calls it). When running the page, it performs the jump to the other page, but does not filter the page on the selected hierarchy value on the original page.
    Why does this not work?
    If I do the same thing by selecting the Goto from the context menu on the cell it works fine.

    Answering my own question here....
    This was solved by applying the patch mentioned in Note 1115027.

  • Variable Values in BEX Analyzer 3.5

    Hello,
    I have a query that has a user input variable for a country.
    The first time I run the query I select GB.
    I run the query again and select FR.
    All fine so far.
    The third time I run the query I notice that the variable value has changed back to GB. It has not remained as FR which was my last selection.
    This happens for all variables that I am using. Is there a setting or offset that is awry?
    Cheers,
    Guy

    Hello Durgesh,
    Not quite what I had in mind as now I can't view any of my variables when refeshing the query.
    I just need variable values to remain constant unless I change them but, I still want to view them before executing the query.
    Guy

  • How to set variable value in BEX analyzer for IP Layout

    Hi All,
       I have created a simple planning function to copy data from one account to another and I have used mandatory selection variable for Fiscal year /period. When I execute the planning function through Planning modeler I get the prompt for the variable and the planning functions execute without errors and return the values. But now when I design the Bex workbook using my Input ready query that have button to execute the planning function,I don't get the prompt for the mandatory selection variable. I need to set the variable vaule in design mode then the function return the values. Is there way to get the prompt for the variable when I choose to execute the planning function. Also is there a option in Web application designer too?
    Please let me know what I'm missing.
    Appreciate you help.
    regards,
    Balaji

    Hi,
    At the back of button specify the following parameter:-
    CMD    1        Execute_planning_function
    Planning_function_name  1   xyz
    Var_name     1    variable_name
    var_value      1    blank
    Can also refer to link below:-
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0a89464-f697-2910-2ba6-9877e3088954?quicklink=index&overridelayout=true(can refer to page 20)
    http://www.sdn.sap.com/ddc5564a-337d-4cf9-a34e-2dab64df09be/finaldownload/downloadid-a61a6724ba8e7b7fbd9c5df9590ab50d/ddc5564a-337d-4cf9-a34e-2dab64df09be/irj/scn/go/portal/prtroot/docs/library/uuid/f0881371-78a1-2910-f0b8-af3e184929be?quicklink=index&overridelayout=true
    Hope it may help

  • How to translate the context menu of Bex Analyzer?

    Hi.experts:
    In my BW system,I found that the "drill down in row" and "drill down in column" context menu all wrong description.How can I translate the context menu?
    Points are waiting for you...thanks in advance.
    Best regards
    Martin Xie

    Hi Martin.
    Check this note:
    Note 1241284 - Incorrect translation in BEx Analyzer connected to NW 710
    Hope it helps.
    gdmon.-

  • How to show filter values of restricted key figures in BEx Analyzer?

    Hi,
    I have following report.
                         Quantity USA        Quantity China
    Product           100                        150
    Quantity USA is a restricted key figure using key figure 'quantity' and a restriction on characteristic 'country' = USA
    Quantity China is a restricted key figure using key figure 'quantity' and a restriction on characteristic 'country' = China
    I notice that when I put only one of these resticted key figures into the query, there is a line in the filter area of the report in the BEx Analyzer that shows the characteristic 'country' and the value on which it's restricted in the restricted key figures.
    E.g.:
    Country          USA
                         Quantity USA
    Product           100 
    If I put both restricted key figures in the query, this line is not shown.
    Does anyone of you know how I can display this line again when using multiple restricted key figures like this in the query?
    Thanks!
    Regards,
    Pascal

    Hi,
    I have following report.
                         Quantity USA        Quantity China
    Product           100                        150
    Quantity USA is a restricted key figure using key figure 'quantity' and a restriction on characteristic 'country' = USA
    Quantity China is a restricted key figure using key figure 'quantity' and a restriction on characteristic 'country' = China
    I notice that when I put only one of these resticted key figures into the query, there is a line in the filter area of the report in the BEx Analyzer that shows the characteristic 'country' and the value on which it's restricted in the restricted key figures.
    E.g.:
    Country          USA
                         Quantity USA
    Product           100 
    If I put both restricted key figures in the query, this line is not shown.
    Does anyone of you know how I can display this line again when using multiple restricted key figures like this in the query?
    Thanks!
    Regards,
    Pascal

  • User Variables values are not showing in Bex analyzer

    Dear Friends,
    I created a report in Bex analyzer ( Excel).
    Now i want to show the variables values in the report.
    i put text item there and click on it but in filter tab there is no variable is exist.
    Any help will be highly appricated.
    Regards
    Naeem

    dear i know how to display the variable values.
    But unfortunatilly there is nothing appear in filter tab.
    my variables are not in filter tab its empty.
    i already choose the data provider.
    regards
    Malik

  • BEx Analyzer - Filter value

    Hello,
    Please help me in the following issue:
    I have craeted a query that has in the filter charactristics Storage Location and Warhouse.
    In th Query designer if I want to restrict the characteristic I can see all the values. In Analyzer, I can not see any values, only not assigned.
    This happens for Warhouse. For storag location everything is ok.
    Do you have any idea why this could happen?
    Thank you,
    Ramona

    Hi
    Check ur DSO for data for that particular field .... if it is present then check for field routine if any..
    there should not be any problem in getting value in Cube...
    And for your query u can restrict a field in query designer and then your report will run with this restriction only....
    Other wise u can have variables defined in query for restriction at run time.....
    Thanks,
    Vikrant

Maybe you are looking for

  • Clearing G/L Subaccount Open Items?

    When posting manual bank statements, the individual amounts on the statements do not clear against subaccount amounts.  This is due in part because of batch processing of incoming and outgoing payments.  Ie.  Deposit 150 checks, total deposit $225,00

  • Camera gone wrong

    My camera suddenly decided to add it's own little stamp on each of my photos, it just looks like a black dot but when u zoom in it looks like a little symbol, it almost puts it in the middle of the pic. Up until 2 weeks ago all my photos were fine. I

  • Why we need ITS in application server?

    Can we say that SAP application server acts same as J2EE application server?

  • Mac itunes 11.1.2 not finishing sync iphone 5s

    I have just updated my Iphone 5s to 7.0.3 and Itunes to 11.1.2 on my MAC 10.8.5. When performing a sync when the phone is plugged in,  Itunes does not complete the sync.  Instead the progress bat at the top just sits there "progressing" with the noti

  • Undoing a mask around several text boxes.

    How do I undo the mask around several text boxes so that I can go into those boxes to make revisions?  The mask is making entry into the text boxes impenetrable.