Not to seen reversal doc in fbl3n line item level

Hi ,
We have posted doc and reversed it ,but we are not able seen reversal doc in fbl3n but at the same time we can able see orginal doc .
line item also activated for that GL account.
Your intime responce is highly apprecated
Thanks
Seshu

Hi ,
we can able see reversal doc in fb03 and also this is there in FS10N also but it's not there in FBL3N and when we select in line item level in fs10n it's saying no line item possible for this doc .
we can able see original doc but not reversal doc in FBL3N
More over this gl also activated line item disply
Thanks
Seshu
Edited by: vyshnava_sesh on Jun 1, 2011 4:52 PM

Similar Messages

Tax Code does not appear in services PO at Services line item

Dear Experts,
I am trying to create a services PO with tax code. The tax code should be entered at Services Line item level not the PO line item level. But I can not see Tax Code field in the line item level. Although I have activated the the option for Tax Code at Services line item in t-code ML100. I have also checked the field reference settings for PO and External services to see if the field is suppressed.. but it is an option field in the setting...
Can you please help what other setting needs to be done to see the tax code field at service line item level?
Regards,

Hi Kathrine,
Go to SPRO-> Material management ->External services Management-> Define Screen layout
In Field selection 5 double click field selection string 2.
Check in additional data if your tax code is required field. refer the screen shot.
Regards
Subbu.

FS10N balance not tie with FBl3N line item totals

Hi
I searched the forum for posting on FS10N and FBL3N incorrect balances and I did not any post appropriate for my issue. Hence I am posting my issue here.
For a particular month, say 072010, FS10N GL balance does not tie with FBL3N line item totals. I am not sure why. In our case, we did not archive any line items and this is not related to year end carry forward. Year beginning GL balances look fine. We dont have any negative postings. Only few GL balances are off. We are using 4.7 version.
Do you know why this inconsistency and how to rectify it? Is there any program which I run apart from Yead End carry forward?
any ideas really appreciated.
Thanks

Hello
We have already this trouble.
To correct it you need to proceed like this (when NewGL is not activate, with new Gl there is one new programm)
Without newGL
- Block account to be posted (transaction FS00 Block for posting in the company view)
- Delete open item, by using the programm RFSEPA03 (you need to adapt it by a copy because if you don't you can't run it), also this programm will unflag your account in the company view
- Delete line item by the standrd program RFSEPA04
- Create the line item by the standard program RFSEPA01
- if this account is managed by open item, run the programm RFSEPA02 (you need to do the same adjustement of the RFSEPA03)
With NewGL, there is something new. the program RFSEPA02 is linked with a new transaction and you don't have to adjust it FAGL_ACTIVATE_OP. The difference is when you create the open item, you have to define the default profit center and default value depending of the customizing of the leading ledger.
BBest regards
Philippe,
Thanks for the rewards.

Wip gl account amount and fbl3n line item gl account not matched

hi sap gurus
Cound any solve this error
i got one error at the time of wip calculation i.e., during settlement of order, the wip gl account amount and the FI line item gl account amount i.e., in fbl3n line item the wip gl account shows the differnt amount.
now my question is why system shows like that Plz any one tell me the solution.

SAP Note says 968812
There are various reasons for verified differences:
1. You made direct FI postings to material balance sheet accounts.
2. In MM account determination, balance sheet accounts are used for operations other than 'BSX'.
3. Material documents exist that have no FI follow-on document, even though they should.
4. There are FI documents or other accounting documents but the source document in materials management is missing.
Solution
(Point 1)
The amounts from these postings do not have any equivalent in the material valuation and therefore cause the MM/FI differences. You must cancel the corresponding postings in FI. You must then set the 'Post automatically only' indicator (XINTB) in the account master record (fs00).
(Point 2)
In MM account determination, material stock accounts can only be assigned during operation 'BSX' because only these postings update the material valuation. Postings from other operations, such as price difference (PRD) or revaluations (UMB), lead to MM/FI differences. The balances resulting from this must be transferred to other accounts in FI.
(Point 3)
Your system contains active customer enhancements (user exits, customer exits, BAdIs) that cause an additional 'COMMIT WORK' statement to be processed. This is not allowed and results in inconsistencies. The incorrect documents can be corrected by SAP Remote Consulting (SAP employees should refer to internal Note 941721).
(Point 4)
This case is identical with case 3. However, usually it is not a 'COMMIT WORK' statement that is responsible but a 'ROLLBACK WORK' statement in the customer source code. In particular, method MB_DOCUMENT_BEFORE_UPDATE in BAdI MB_DOCUMENT_BADI creates a ROLLBACK without program termination and an incomplete document because the documents in accounting are created after the BADI. Therefore, a ROLLBACK must always be accompanied by a program termination.
The MM document cannot be regenerated. The accounting documents must be deleted. This can be initiated by a message (which may be subject to charges) on component FO-GL-GL-X. See also Note 636442.
(General)
If the cause of the problem is unclear, SAP support can run an analysis. In this case, first implement the additional reports from Note 32236 in your production system.

Based on single Doc number Multiple line items update to in single Z database table

Dear Frds,
Based on single Doc number Multiple line items update to database table
Example : Doc Num: Janu
If users are using different doc number again the line items are modifying and replacing to new document Number . Pls Help me Screen attached as
Like CS01 Transaction

Dear Frds,
Based on single Doc number Multiple line items update to database table
Example : Doc Num: Janu
If users are using different doc number again the line items are modifying and replacing to new document Number . Pls Help me Screen attached as
Like CS01 Transaction

Fixed Value Date at line item level is not in changable mode when copied

Dear SDN Team,
Hi i have a problem in the Fixed Value date at the line item level in the Return sales order.
The Problem is When creating the return order with reference to the scheduling agreement (10.03.2010). In the Return sales Order at the line item level the fixed value date is coping from scheduling agreement item (fixed value date eg: 31.12.2009)
But i would like to have the fixed value date in the return order as 10.03.2010 but the field is greyed out.
But normally when the sales document is created with reference to the preceding document the same will be copied. But field is greyed out and it is not in changable mode.
Can any one help how to solve this.
I have checked also SAP Note where i did not find any messages.
In normal scenario - when the order is created without any reference the fixed value date is in changable mode until the document is in open.
Pleas help me to resolve this.
With Regards,
Jai

Hi Lakshmipathi,
I am sharing the resolution which was done to this requirement.
We have a specific condition type with statisticaly used and with routine to have KWERT with zero value,
Based on the different key combination. We have a specific key combination for the SA and SDoc and for this we need to maintain a condition record for the condition type with fixed value date and which will be linked to only the specific document. Once this is done.
We need to do update pricing in the sales order for the particular line item. by doing this the Fixed value date will be changed in the particular line item.
Thanks and Regards,
Jana

Clearing doc contain no line item ?

Dear Gurus,
In which trx clearing doc contain no line item.when i perform trx in F-44,F-32 and F-51 clearing doc contain line item with same busines area.
Pls help.
*assign full marks
Regrds
Mahesh

Hi
" Transfer posting with clearing" is the transaction for account clearing without creating any posting. Did you select that in T-codes mentioned below?
Jayaram

FI Posting of Invoice at the Line Item Level.

Hi All
Client has requirement of posting at the invoice line item level.But standard FI-AR posts at the Invoice Header level.
E.g If invoice has two line items of $20 and $30 respectively.
On the standard FI-AR side,one accounting document of $50 will be generated.It will not be posted for each invoice line level.
In order to post at the invoice line item level,i am looking for a posting user exit from SD side that will two individual account document each having invoice line item amount.Or we can have one FI accountng doc having two invoice line items in that.
Is there any way we can do this unique type of enhancement in ABAP? and also what is the exact user exit we can use from SD invoice side.
Regards
Manjinder

This is not entirely accurate - if the items are pointing to, say, different profit centers then there will be one posting per profit center. If this cannot be resolved by the standard SD/FI configuration, then the users might need to change their business process. I personally don't see any need to create postings on line item level. Just imagine what it will do to your database size.
Anyways, you'll find all the user exits here:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/erplo/sdUserexits
But, again, this sounds like a very bad idea.

Tax column at line item level in VA01/VA02

Hello All,
I had a requirement to add the tax column at line item level for va01/VA02 transaction.
I modified the screen 4900 and added the VBAP-TAXM1 column to the item table control and made that column input enabled.
Now I had to calculate the TAX conditions based on the input in that tax column. None of the user exit is triggering when I change the values in this field, do I need to make any changes in the PAI of the 4900 screen in order to make the userexits trigger or am I missing anything?
Thanks & Regards,
SasiKiran.

Hi
Please, see SAP Note 862228 - Order reason for returns on item level. It is related with field AUGRU. Remember that it is a modification. I suggest you to add in addition data (for instance, SAP Note 209278 - Display of customer-specific fields in sales doc, SAP Note 302497 - Additional cust. fields not displayed in 'Additional data B', SAP Note 420546 - Additional data B and transaction variants in sales order and related notes).
I hope this helps you
Regards
Eduardo

Posting customer payment at line item level

Hi all ,
Is there any way that we can configure customer payment in lock box to be done at line item level,
what I mean here is if some invoice has three line items then can we configure some BADIs & do some ABAP coding to post at one of the line items?
Please guide

HI Nik,
Not sure of vendor invoice. But we did customer invoice payments at item level. Follow below steps.
1. FIll in all the details in F-28 iitial screen.
2. In additional selections select radio button Others, Press enter.
3. In the popup select document number.
4. Here enter ur accounting doc number.
5. Click on process open items
6. Here u will get all line items. Now click on search and select line item, Neter item number.
7. Now u will get only the line items u want.
8. Now u can do complete or partial payments as per ur req.
Hope it is clear.
Thanks,
Vinod.

In report painter report, line item level drilldown report requirment

Dear All,
I created one report in GRR1, when I execute the report i am not getting line item wise drilldown option. For example one cost center no of line itemwise posting ( g/ls wise)posting is there. By double clicking on that specific line item we will go that ledger and see the data available in that ledger.In standard reports that option available but my own reports I unable to go drilldown at ledger level cost reports.
Please sugget anyone, where I am doing mistake in report creation level.
Thanks
M Srinivasa reddy
Ph : 9637399076

Thank you,
I attached reports to Library based on that I am able to drilldown line item level of the report.Is it corret or any other way for line item level drilldown option for report painter reports
Thanks
M Srinivasa reddy

Financial reporting and balance carry forward at Line item level

Hello
We are in the process of implementing a new GL and using it to create Balance Sheet and P&L statements in BW.
We have installed the new datasource for GL line items 0FI_GL_14 and loaded the data to a DSO. Installed the 0FI_GL_10 (totals infosource) as well.
Also we created a custom infocube on the line items DSO and want to use it to report against a Financial Statement Version. In order to do that we created a
virtual cube with the FM and added the necessary Financial Statement Item and other key figures in the virtual infocube.
Now I want to know is it the correct way to create financial reports?
Can we load totals and Line items to the same infocube? Do we have to load totals to a different DSO/Cube or same Cube?
How do we address the Balance Carry Forward on the Line items cube? Since the balance carry forward is done on totals only, and the cube I created is a detailed cube is it possible to carry forward balances at that level?
Also can someone let me know what is the best approach to create financial reports and give drill down capability at the document level?
Thanks in Advance
Raju Kosuru

Now I want to know is it the correct way to create financial reports?
NO .. Its not.
Can we load totals and Line items to the same infocube?
NO
Do we have to load totals to a different DSO/Cube or same Cube?
Yes.. SAP has delivered C10 for Totals and O14 for line items... No point in creating cube for line items i.e. on top of O14.
Balance carry forward can be done on totals only (that is how totals extractor _10 is designed), U can not do that on the Line items. Pls contact functional consultant for clarification
Best approach is RRI (Jump targets) for _10 report to _14 report to give drill down capability at the document level.

Switch to Open Item Management at a Line Item Level

Hi Guru's,
I want to change a non Open Item G/L account to an Open Item at Line Item level, we are on version 6.4
We have activated New G/L and I checked OSS note 175960, it says its not applicable if New G/L activated.
I tried program FAGL_SWITCH_TO_OPEN_ITEM , it switched the account to Open Item but the problem here is it did't switch at line item level it is just showing total balance. My requirement is to switch at Line Item level.
Is there any solution other than creating a new A/c with Open Item checked and transfering balances from old A/c to new A/c.
Please suggest
Thank You

Hi,
There are 3 ways to realize it.
1. create a new account with XOPVW, then transfer the balance from old account to the new one. this is recommended by SAP.
2. if you want to change flag of XOPVW in this account, then make the balance to zero, then change this flag in FS00, at last trasnfer the balance back to this account-> Not recommended by SAP, because it is easy to cause data inconsistency.
3. method in note:175960-> but report :RFSEPA02 and RFSEPA03 are not support since release 4.5A.
So if possible, suggest you to use 1.
Best Regards,
Gladys

Asset field blank in FS10N (Drilldown to line item level) report layout

Hi all,
i ahve posted a Retirement transaction to an asset and when i went to see the line item on the GL using/executing report FS10N for asset transactions GL and drill down to the line item level by double clicking on the period balances and I choose field "Asset" to be displayed in the layout, it is blank. How can I get report FS10N to display the asset number from the transaction?
the field is available in the layout but when i pull it into the report it is Blank in the report.
Any help would be appreciated. Thanks
Jay

Hello,
FS10N shows only balance, FBL3N shows the line details.
Add the asset as a special field via OBVU (Table: BSEG, Field: ANLN1).
Regards
Waza

Custom filed at line item level in order.jsp

Hi,
I want to add a custom material number field at the line item level that will search for the item related to the customer material number and populate the order.jsp.
similar to the below mentioned Standard functionality:-
In order.jsp when we enter a valid item no in the item text box
and press enter then the related data of the item is populated in order.jsp.
Is this possible ??
If yes please let me know how can we achiese this.

Satish,
the problem with product search is that ....
custommaterial number will be mapped with the item number for different customers in a separate table. so if i place the searc in proucts search tab it will fetch form product master.
so I was think of extending the process flow and from jsp capture the value entered and trigger action from there make a item search following the standard process.
but my problem is that I am not able to capture the value entered in the custom field when refresh is clicked?
can you tell me how is the item search done when we enter the item number and press enter?
please suggest

Not to seen reversal doc in fbl3n line item level

Similar Messages

Maybe you are looking for