Not to Supress Hierarchy Structure

Hi,
Based on the transaction data available in the cube my hierarchy structure gets changed. I want the structure to be static.
Say for example I have account hierarchy, when I run it for different business area the account hierarchy structure changes as there is no data for that account and business area combination in the cube.
Is there a way to make the hierarchy struture static eventhough if there is no data in the cube the account in the hierarchy should display with zero.
Thanks,
Anand
Edited by: araj123 on Mar 5, 2012 8:06 PM
Is there a solution without creating custom hierarchy in the BEx query designer, as I want the hierarchy created in SAP ECC to be leveraged.
Edited by: araj123 on Mar 5, 2012 8:08 PM

Hi Sven,
you didnt understand my question properly. I know the disadvantage of having static structure in BEx query designer and thats why I asked is there any other solution.
Also,I found the solution. You have the option in characterstics properties.
Thanks,
Anand.

Similar Messages

  • How to include the not assigned nodes in Hierarchy structure

    Hi Experts,
    I am running a report which has got Hierarchy variable type. After execution of the query some of the nodes appear always under "not assigned".
    Please let me know is it possible to include these not assigned node under hierarchy structure.If so how to do that?
    Regards
    Kumar

    Hi Subbiah.
    You can also supress the "not assigned" nodes in the hierarchy maintanence by choosing: Hierarchy attributes -> Supress unassigned nodes.
    Hope it helps.
    BR
    Stefan

  • Org unit Hierarchy structure between two  Key date s

    Hello Friends,
    We have an issue with displaying HR Org unit hierarchy structure between two calendar months.
    The BI Report has a selection parameter to select Org unit hierarchy , Calendar month From and Calendar month To
    The BI Report is to display the no.of sick absence days for employees in a chosen Org unit hier.
    Employee A had a sick absence of 5 days in the month 04.2011 in the Org unit X . The same employee had a sick absence of 4 days in 05.2011.The Org unit X then delimit in 05.2011 , the Org unit X is no longer in Org structure from 05.2011.
    When we run the report for 04.2011 to 04.2011 , the employee A is showing absence under Correct Org unit ie X with correct Org structure .
    When we run the Report for 05.2011 to 05.2011 , the employee A is showing absence under hierarchy Org unit Not assigned which is OK .
    But the issue is when we run the Report from 04.2011 to 05.2011 , The employee A absence days 9 (5 +4 ) showing under Not assigned Org unit hierarchy structure which is the latest Org unit .
    When I deactivate the Org unit hierarchy and choose tech name of Org unit , It is showing correct Org unit key
    But The user would like to see 5 days under org unit X and 4 days under Not assigned with Correct Org unit hier structure when we run the Report from 04.2011 to 05..2011 .
    We have a user Exit variable for the Key date in the Bex Report which seems to be taking only one date at any time .
    Is there any way to get the correct figures under Org unit hier structure where employee had absence in when we put range of calendar months on a selection screen ?
    Any advice appreciated.
    Thanks.

    Hi
    Yes, we can display the same by using time dependent hierachy's i.e. your org is converted to time dependent so that respective employee shows with respective of time.
    Regards
    Jagadeesh.M

  • Org unit Hierarchy structure  at Key date

    Hello Friends,
    We have an issue with  displaying HR Org unit hierarchy structure  between two calendar months.
    The BI Report has a selection parameter to select Org unit hierarchy , Calendar month From  and Calendar month To
    The BI Report is  to display the no.of sick absence days for employees in a chosen Org unit hier.
    Employee  A had a sick absence of 5 days  in  the month 04.2011  in the Org unit X .  The same employee had a sick absence of 4 days in 05.2011.The Org unit X then delimit in 05.2011 , the Org unit X is no longer in Org structure from 05.2011.
    When we run the report for 04.2011  to 04.2011 , the employee A is showing  absence   under Correct Org unit ie X with correct Org structure .
    When  we run the Report for 05.2011 to 05.2011 , the employee A is showing absence under  hierarchy Org unit Not assigned which is OK .
    But the issue is when we run the Report from 04.2011 to 05.2011 , The employee A absence days 9 (5 +4 ) showing under Not assigned Org unit hierarchy structure which is  the latest Org unit .
    When I deactivate the Org unit hierarchy  and choose tech name of Org unit , It is showing correct Org unit key
    But The user would like to see 5 days under org unit X  and 4 days under Not assigned with  Correct Org unit hier structure  when we run the Report from 04.2011 to 05..2011  .
    We have a user Exit variable  for  the Key date  in the Bex Report  which  seems to be taking only one date at any time .
    Is  there any way to get the correct figures under Org unit hier structure where  employee had absence in when we put range of calendar months on a selection screen ?
    Any advice appreciated.
    Thanks.

    Hi,
    You can try adding two more attributes to Org Unit as "Calender month from" and "Calender month to".
    In these attributes maintain the validity period for the corresponding master data.
    For example, in your case you can maintain the master data as:
    Employee | Org Unit | Calender month from |Calender month to | sick absence
    A | X | 4.2011| 4.2011 | 5 days
    A |    | 5.2011 | 05.2011 | 4 days
    And in report use variables for Calender month from" and "Calender month to".
    Hence, when user executes the report with selection as:
    Calender month from" = 04.2011
    "Calender month to"    =  05.2011
    The data will be read from master data based on these selections along with key date and report will show output as expected.
    Employee | Org Unit | Calender month from |Calender month to | sick absence
    A | X | 4.2011| 4.2011 | 5 days
    A |    | 5.2011 | 05.2011 | 4 days
    Hope this works for you.
    Regards,
    Geetanjali

  • Product :  Errors in attribute hierarchy structure SAP BCA   000164

    Hi All ,
    When ever i create /Display /Change Product in
    Financial Supply Chain Management --> In House Cash > Master Data>Product Definition--> Product --> Create /Change/Display
    system through below mentioned error .
    I tryed to resolve problem as per below mentioned program through se38 , but still getting same error
    Errors in attribute hierarchy structure SAP BCA   000164
    Message no. FIPR217
    System Response
    An error was found in the attribute hierarchy.
    In some cases, it is not possible to display the attribute hierarchy without having to correct the errors first.
    Procedure
    It is recommended that you run the FIPR_CLEAN_ATTRIBUTES (by using transaction SE38).  This report can recognize errors, and it attempts to correct them automatically.
    Caution: This report can change your table entries permanently.
    Once this report has run, you need to check the hierarchy structure, and make any necessary changes.
    Regards
    Prakash Sharma

    Hi,
    the realignment (KEND) does not change the line item tables (CE1***, CE2***), thats why they remain unchanged.
    The line items in CE1**** can not be changed. If you really want to have new line items (with the new prod. hierarchy) try in test-client if the use of report RKECADL1 and the new transfer to CO-PA for the deleted line items (KE4S, KE4SFI,...) can help you (SAPNET-note 69370 for details).
    CE2**** + SQL-error: As per now, I don't have an idea how to deal with that cases.
    best regards, Christian

  • Error in the hierarchy structure - Data Load Failure

    Hi
    We are having a regular Master data hierarchy Full load: 0WBS_ELMT. This data load is from the SAP R/3 source system. It was failed today with following message:
    Error in the hierarchy structure     
    Node ID 00016749 does not exist.
    Node ID 00005867 starts an endless loop
    Node ID 00001367 has not been included in the hierarchy
    Can any one help me out to solve this issue?
    Best Regards,
    Venkata.

    hi,
    refer to this thread.
    No hierarchy displaying in the Maintain Hierarchies

  • Time dependent hierarchy structure in SEM-BPS

    I want to use a time dependent hierarchy structure in sem BPS to make combination chek and proposal in a layout.
    I have manage a relation of type hierarchy (based on this hierarchy) in the characteristic relationship tab page of my planning area.
    I open my layout to make entries in the future (next fiscal year) but the system doesn't propose me the datas valide for the next fiscal year in my hierarchy but the datas validate today.
    There is a key date in the master data tab page of the planning area but it seems to have only effects on attributes with validity dates but not with hierarchy with time dependent hierarchy structure.
    Thanks for your help.

    Hi,
    The key data that you enter in the planning area is only for time dependent characteristics and attributes. For the hierarchies in the characteristic relationships the current data is used.
    If you still want to use a time dependent hierarchy for modeling the characteristic relationships you could use a characteristic relationship type exit. In the exit you can read the hierarchy with the proper date.
    Best regards,
    Gerd Schoeffl
    SAPNetWeaver RIG BI EMEA

  • Hierarchy structure changes

    Hi All,
    I have one requirement at clent site where hierarchy structure changes i.e. parent child relation switches or changes from one level to another level. For example WBS element hierarchy stucture for project 101014 is:
    101014--root
    101014-1>101014-1-01>101014-1-01-02-->101014-1-01-02-01
    after above hierarchy load to bw there are chances that hierarchy nodes change their positions.
    i.e.above hierarchy node 101014-1-01 can be removed from  parent(101014-1) and assigned to 101014-2.
    In Next load Hierarchy need to realign/restructure according to new hierarchy tree from ECC system. Right now we are BW 7.30. Thanks for you help and gurantee of points.
    Regards,
    Reddy

    Hi Gaurav,
    Thanks for quick response, we are running process chain on daily basis which will trigger full load from ECC to BW. I thought the same but when I look below error message I think we need to some how delete hierarchy data and reload with restructed or realigned data. Please find below error details and once again thanks for your help.
    Node ID 00001564 has not been included as a sibling node or as a child node
    Message no. RH207
    Diagnosis
    The node with the ID 00001564 and the node name 101014-1-02-03 is not used as a child node (field CHILDID) or a sibling node (field NEXTID) by any node in the hierarchy. The node is also not a root node because the ID of the parent node 00001565 (field PARENTID) is not equal to 0. The node is therefore not linked into the hierarchy. Therefore the node is not connected to the hierarchy.
    Procedure
    This message is displayed in addition to message RH 242. The node is the root node of a subtree that is not connected to the hierarchy. For further details, see the long text for message RH 242.
    4 of a total of 13,846 nodes are not included in the hierarchy
    Message no. RH242
    Diagnosis
    The root nodes are the starting point for moving through the hierarchy. The content of the fields NEXTID and CHILDID is used to move from the current node to its sibling and child nodes.
    4 out of a total of 13,846 nodes cannot be reached by moving through the hierarchy in this way. These 4 nodes are not connected to the hierarchy.
    System Response
    The hierarchy is not consistent and therefore cannot be activated.
    Procedure
    The cause of the problem is usually incorrect links to sibling nodes (field NEXTID) or child nodes (field CHILDID). An incorrect value often means that an entire subtree (consisting of several nodes) is not included in the hierarchy.
    To simplify the search for incorrect links, the system identifies the nodes (from all the not connected nodes) that are not used as sibling nodes or as child nodes. These nodes are usually root nodes of subtrees that are not connected to the hierarchy. You can find these nodes in the RH 207 messages that follow.
    Try to localize the problem by using the RH207 messages for help. If the hierarchy is loaded from an SAP source system, you can check whether the extracted data is correct by executing transaction RSA3 in the source system. If necessary, check if the data is modified with a user exit. If the hierarchy is loaded from a file, check the contents of this file. The problem might also be due to an error in the transfer rules or in the transformation.
    Thanks
    Reddy

  • Report designer error for hierarchial structure on Columns

    Hello,
    I have a query with a structure in rows and another one in columns. I also have a 0COMPANY hierarchy Dimension within the Columns.
    When I insert the data provider into a report designer report, I receive the following error:
    "Query contains a hierarchial structure on Column(s)..."
    Has any one encountered this issue before? Is there a note or workaround available?
    Thank you.
    Sri Yalla

    Hi,
    the report designer need to have a fixed number of columns. If you have a Hierarchical Structure in the Columns, the number of columns can change. Therefore Report designer does not allow to use this DP in this drill down. You should place the Row structure to the columns and the hier-structure to the rows. then it should work.
    best regards,
    kai

  • While opening condition editor its not showing me the structure

    Hello Experts,
         Mine is a proxy to file scenerio.....with a condition in reciver detrmination and while giving conditon in condition editor,  due to an unknown reason,  its not populating the Message Structure.
    It is giving an error messege " Message interface does not exist in any software components installed on this business system "
    If there is some 1 with similar experience,
    pls revert back,
    Arnab .
    Edited by: Arnab Mondal on Sep 25, 2008 12:14 PM

    Hi,
    If you get the following msg while selecting the BS in Receiver Determination
    "Message interface does not exist in any software components installed on this business system"
    1) Open ID-----Double click on Business system that which u are using in the scenario
    2) Check whether you are able to see the SWC in the Othere attributes TAB
    3) If it is not there means goto SLD----Open the Technical System of R/3 by choosing Web as ABAp type
    4) Click on Installed Products TAB
    5) Click on Add New product and add your Product of the SWC whcih you are using for developement and Save it
    6) Then goto Business systems TAB in the same Technical systems window and click on the Business System appears in the window.
    7) Click on Installed products and Check the check box of your Product and then finally save that.
    Now you should be able to see the SWC in the Othere attributes TAB in ID
    Regards
    Seshagiri

  • How to use File Adapter with hierarchial Structure?

    Hi,
    How to use File Adapter with hierarchial Structure like..
    Data:
    --Header Details:
    Line Item Details:
    Data
    Bcoz I am getting a Flatfile in a hierarchial way as shown below.
    Header Details :1
    Line Item a
    Line Item b
    Header Details :2
    Line Item c
    Line Item d
    Kishore

    Hey Kishore,
    In order to create a structure you need to use the file with convertion mode on the sending communication channel of the file adapter.
    check the link for the needed configuration paramters.
    If the structure is more complexed you can use the Contetnt master(CM) from itemfield which allows to ceate XML file from complex flat files and more.
    <a href="http://help.sap.com/saphelp_erp2005/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm">File sender adapter</a>
    If you have any question i'll be more than happy to assist.
    Nimrod Gisis

  • How to find key figures not created in a Structure.

    After using Where Used on a selection variable Z_FISCPER3_M_SV a list of Key Figures appear. I wish to amended these Key Figures as the selection variable used is incorrect. However, I cannot find these Key Figures in the Structure?  Does anyone know how to find Key Figures not created in a Structure.

    Thanks for such a quick response.
    I am assuming the following about the table :
    -     Column u201CCALDAYu201D contains a date value for each day the Index is active.
    -     Column u201CBIA_USEDu201D contains a value that is iterated for the given day each time the Index is used.
    -     Column u201CBIA_NOTPOSSIBLEu201D contains a value representing how many times a query could not access this Index.
    -     Column u201CNO_BIAu201D tells if a BWA Index exists at all on any of my BWA Blades
    -     Column u201CBIA_TECHINAu201D ????????
    -     Column u201CBIA_INAu201D ???????
    -     Column u201CDB_FALLBACKu201D ???????
    I am not sure if my understanding of the column is correct.  Can you tell me they are?  The columns with u201C???????u201D mean I have no solid understanding of how to use these columns at all.
    Thanks

  • How to create Formulas in the hierarchy structure

    Hi,
    Is it possible to create formula with in the hierarchy structure, so that the both hierarchy drill down and the created formulas can be displayed at the query output. Please give the valued suggestions.
    Thanks
    VEERU.

    Hello
    You have in this case to create a structure and select the node concerned in your hierarchy.
    Then create a new formula based on your previous selection for example.
    Rgds

  • In query designer, an hierarchy(structure)  duplicating lines in level 2.

    Here we are at version 7.0 - SP 10, I have created a structure hierarchy in BEX, and when I execute this query the result is ok ... until I tried to closed or open the second level.
    At first, it doesn't close, and the worst if I tried to open  it's
    duplicating the lines of the second level.
    In query designer, creating an hierarchy(structure) something like this:
    > total division 1    
    ...> division 1.1     
    ...> division 1.2     
    > total division 2    
    ...> division 2.1     
    ...> division 2.2     
    and after the execution, if I tried to close or open the level of division 2 the result will duplicates the lines division 2.1 and division  2.2. the result is like this:
    > total division 1    
    ...> division 1.1     
    ...> division 1.2     
    > total division 2    
    ...> division 2.1     
    ...> division 2.2
    <b>...> division 2.1     
    ...> division 2.2</b>
    The stange is in excel it works normaly.
    Best regards,
    Silvio Meurer

    Hi,
    An Heirarchy is always an addition of the below nodes. hence. WBS 1 = WBS 1.1 + WBS 1.2. since youre looking at durations. it will add up 7+9 instead of looking at earliest start and latest end dates.
    dont know if itll work but a suggestion would be to get the start date and end date for WBS 1 and then do the calculation for duration in a formula in query designer.
    regards,
    Dilanke

  • Cost Center not appearing in Hierarchy

    Hello,
    I am sending an IDoc from an external system into ERP to create new cost centers.  The IDoc comes in successfully and creates the cost center and I can see that it was correctly assigned to the cost center area if I look at the record in KS03.  However, when I look at the cost center hierarchy it does not show that the cost center has been assigned to the correct node. 
    Any clue why this may be happening?

    Hi,
    When sending cost center data with COSMAS01 this will include the hierarchy node in the cost center master data (separate field in cost center table CSKS). So only the information of the cost center node is transported. However, COSMAS does not include the hierarchy itself.
    This is a separate IDoc type, namely COGRP1 which is not transported with IDoc type COSMAS01.
    Nevertheless, the hierarchy can then be rebuilt in the target system by running RKCORRH1. This report will read the cost center´s master data and insert this cost center into the specified node of the standard hierarchy.
    This is actually a regular procedure - if you do not want to run the report you may also need to send the hierarchy with IDoc type COGRP1 separately.
    regards
    Waman

Maybe you are looking for