Not transfer field KNA1-STCD2 from SAP R/3 4.70 to CRM 3.0

Hello to all.
We decided no to use the field KNA1-STCD2 in all the customers created in SAP R3 4.70 and we want not to transfer this field from SAP R/3 4.70 to CRM 3.0. There are several customers with value in this field in R3 but they never were transferred to CRM.
Is there any way to get this? We are looking for any exit where we can delete this field in R3 but we hace not found anything yet.
Thanks in advance.

Try XD99 Customer Master Mass Maintenance. It will permit you to perform mass maintenance to one or multiple fields. Leave the field blank in the "NEW" value to update with blank.
Try with 1 - 10 customers to see that test is working. Then execute for all customers (or as per requirements).

Similar Messages

Issue in creating Credit Note for road carrier invoice from SAP TM system

Dear All,
I am facing issue in creating Credit Note for road carrier invoice from SAP TM system.
The following steps I have performed:
1)
1)    1) Create Freight order with Amount 20,100
2)     2) Create Freight Settlement Doc and send it to ECC. Hence PO and SES will be created in ECC with Amount 20,100
3)     3) Invoice verification (MIRO) done w.r.t. FO in ECC with Amount 20,100 and following entries posted :
Carrier A/c - 20,100Cr
GR/IR A/c – 20,100 Dr
4)    4) Created Credit Note in SAP TM against freight order with Amount 1,010 and transfer it to SAP ECC.
5)    5) By this a new PO and SES was created with negative values (with amount 1,010) in SAP ECC
6)    6) In transaction MIRO, Credit Memo was created against the freight order.
7)    7) By this it is showing value 21,110 by adding the line items of Original Purchase Order and Credit Note Purchase Order as 20,100 and 1,010 respectively.
8)    8) By posting this following are the accounting entries which is not correct:
Carrier A/c – 21,110 Dr
GR/IR – 20,100 Cr
GR/IR – 1,010 Cr
9)    9) In report FBL1N which is showing the remaining liability of value 1,010(21,100 – 20,100) instead of 19,090 (20,100-1,010=19,090) for the carrier.
Please suggest how to resolve the issue and get the correct accounting for credit memo?
Regards,
Vibhu Gupta

Hello,
Like my reply in Linkedin group, I got the same issue and solved with BADI in TM side(REQREQ...).
Regards, Marcelo Lauria

My files, photos, email files, software programs, and all information did NOT transfer over to Mavericks (from Mt. Lion). How do I get all my stuff to appear when using Mavericks?

Will someone please help me?
My files, photos, email files, software programs, calendar info, and all information did NOT transfer over to Mavericks (from Mt Lion). How do I get all my stuff to appear when using Mavericks?
My email did transfer over.
Thank you.

First click on the Apple > Logout and Log back in or restart the unit see if that solves it. If it doesn't do you have a backup of your system prior to upgrade? Check Disk Utility and see how much space is being used to make sure the drive wasn't somehow erased.

Qty field value diff from SAP R/3

hi friends,
    i have replicate one table datasource from SAP to BW.................
in datasouce i m using RFMNG quantity field and in BW mapping it to 0DEL_QTY.......
both having datatype lenth 17 and decimal 3.................
data loading is done succesfully..................
all fields is coming right in BW accepting Quantity field.........like
R/3.........................B/W
Qty                         Qty
1                             5.517,000
140                         772.380,00
pls give me some solution.......................

just chk in the extractor in rsa3. what data you are getting. if you are not getting exact data at rsa3 then its extractor problem
Ramesh

Java.lang.OutOfMemoryError during transfer of large data from SAP to PI

Hi experts,
We are trying to transfer large data from SAP to external system via PI but the transfer stucked in sm58 of SAP system with 'error java.lang.OutOfMemoryError'. We have tested before this and we can only get approximately 100K of records to go through successfully. We neeed approximately transfer 300k datas per time. Current setting of max heap size (in mb) of our PI system is 512 at message server and bootstap tab. At servers general tab the max heap size (in mb) is 2048 and its java parameters are having the values below:
-Xmx1024m
-Xms1024m
-Djco.jarm=1
-XX:PermSize=512m
-XX:MaxPermSize=512m
-XX:NewSize=320m
-XX:MaxNewSize=320m
What need to be increased to solve the error?
Thanks.
Regards,
Thava

Hi Thava,
We can set a limit on the request body message length that can be accepted by the HTTP Provider Service on the Java dispatcher. The system controls this limit by inspecting the Content-Length header of the request or monitoring the chunked request body (in case chunked encoding is applied to the message). If the value of the Content-Length header exceeds the maximum request body length, then the HTTP Provider Service will reject the request with a 413 u201CRequest Entity Too Largeu201D error response. You can limit the length of the request body using the tting MaxRequestContentLength property of the HTTP Provider Service running on the Java dispatcher. By default, the maximum permitted value is 131072 KB (or 128MB).You can configure the MaxRequestContentLength property using the Visual Administrator tool. Proceed as follows:
       1.      Go to the Properties tab of the HTTP Provider Service running on the dispatcher.
       2.      Choose MaxRequestContentLength property and enter a value in the Value field. The length is specified in KB.
       3.      Choose Update to add it to the list of properties.
       4.      To apply these changes, choose (Save Properties).
The value of the parameter MaxRequestContentLength has to be set to a high value.
In short parameters to reset values for ABAP side are
icm/HTTP/max_request_size_KB
icm/server_port_ TIMEOUT
rdisp/max_wprun_time
zttp/max_memreq_MB
Parameter to reset values for JAVA side is MaxRequestContentLength.
You can use following link to know more about ICM parameters
http://help.sap.com/saphelp_nw04/helpdata/EN/61/f5183a3bef2669e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/EN/25/b0a4f6f2b03a43a727a165a4d6a555/frameset.htm
regards
Anupam

Regarding Transfer of HR data From SAP System to Non-SAP System

Hi All,
Can anyone Please help me how i can transfer HR Payroll Data from a SAP system to a Non-SAP system. If it can be done by using Bapi's Please send me some notes or code the way how it can be done,data can be transfered through IDOC wht wud be the IDoc format and the message type etc.Please help me out in this, if some one have done it or got any idea pls send it across. Even if my idea is wrong pls sujjest me ur method and the way it can be done.
Thanks & Regards
Sathish

Hi manoj
Thanks a lot, u can send it to [email protected] and [email protected] Pls Send it accross to both.
Thanks
Sathish

Data not getting fetched into Flex from SAP backend

Hello....
I have tried fetching data from SAP into Flex for simple BAPIs. For Ex; there would be 2 to 3 fields and we enter some values in it and these values are wrapped into an object and sent to SAP to fetch the details. This works fine.
But now, my problem is, I want to pass a list of data, as the one of the table parameter in the BAPI is mandatory to be passed. For this I created a arraycollection with same field names as in SAP:
<mx:ArrayCollection id="sel">
     <mx:Array>
          <mx:Object FIELD_NAME="RENTAL_OBJECT" SIGN="I" OPTION="EQ" FIELD_VALUE_LOW="1" FIELD_VALUE_HIGH="9999999"/>
     </mx:Array>
</mx:ArrayCollection>
var inp:Object = new Object();
inp.SELOPTION = sel.source; //parameter name in SAP is SELOPTION
operation.arguments = inp;
operation.send();
I get the result back with this. But it will have only the table\structure names. It is not fetching any records, as it does in SAP when BAPI is executed.
You can have a look at the screen shot of it here:
This is the result that I'm getting in Flex:
http://img43.imageshack.us/img43/1477/screenshotgp.jpg
This is the result I get in SAP when I execute the BAPI directly:
http://img340.imageshack.us/img340/3796/screenshot2wa.jpg
Can someone who have come across this please help me out?
Thanx.
Deepak

Hi Deepak,
To send multiple entries to a table your code should be like this only.
var dateRangeRow:Object = new Object();
input.DATE_RANGE = new Array();
dateRangeRow.SIGN = "I";
dateRangeRow.OPTION = "EQ";
dateRangeRow.LOW = "2002-12-20";
dateRangeRow.HIGH = "";
input.DATE_RANGE.push(dateRangeRow);
Check the below link for details.
http://blog.danmcweeney.com/57
Regards
Basheer

Can not transfer the partner data from ROS to EBP

Hi, All
We are using SRM 5.0, and setup the ROS ans SUS in one client, EBP in another client. All the configuration was done, we maintained the table: BBP_MARKETP_INFO by SM30 with the following record:
COMPANY_ROOT VENDOR_ROOT DUMMY_EKORG USER_ROOT DEF_CURRENCY
O 50000001 50000025 O 50000001 O 50000001 USD
When we create the business partner in BBPMAININT in EBP client by Business Partner from List. there is the error message: " Partner data not transferred from catalog, Inform system admin." Anyone encountered this case, please share your experience. thanks a lot.
GY

hi,
please check oss note with number Note
1089734 - Error when transferring supplier from ROS to EBP.
1) apply the note if it is relevant for your release and support pack....
2) and then also go through all the parameters that are mentioned in the note , wether you have maintained in your system or not...
>
note mentions the following sympton
Symptom
User trying to transfer Supplier Data from ROS (Registration of Supplier system)to EBP (Enterprise Buyer Professional system).In the process of transferring error message appears saying "Currency of purchasing organization could not be determined" ( even when a default currency attribute is maintained in PPOMA_BBP for the user or for the purchasing organisation of the user.
In case, the default currency attribute is not maintained in the PPOMA_BBP for the user or for the purchasing organisation, then at the time of transfer of suplier data from ROS to EBP system, error message pops out saying "Partner data not transferred from catalog. Inform system admin" .
Edited by: khan voyalpad usman on Sep 13, 2008 10:30 AM

** Not able to import IDoc from SAP ECC system

Hi Friends,
I am not able to import the IDoc from SAP ECC system in IR. I have checked that, hostname, client, server no. everthing is correct. I checked in SLD also. Host Name is correct.
While import (after giving the user name and password), I am getting the following error.
Problems to reach R3 System
What could be the probelm ?
Kindly help me friends.
Thanking you.
Kind regards,
Jegathees P.

Hi,
Just counter check following step
1. Go to SWCV definition tab select radio button for Import of RFC....
2. In Connection Data for Import from SAP System maintain correct System and correct Client.
3. Make sure you maitain ECC system in Central SLD.
4. In Import Screen check at the top of the screen have SAP System, is that system from where you want to import the IDOC.
With Regards
Sunil

How to pick the field "Origin Object" from SAP R/3

Hi all,
I need to implement a new field in a BEx Report : "Origin Object". This data is mix of "Cost Center" + "Project type", it's related to the PS module.
This field isn't available in my BW datawarehouse, so I need to figure out where and how to pick up it in R/3. I used the "data element" name : "CO_USPOB" and I've made a research through the "Where used list" tool but I didn't find any tables, only some structures. I've checked all of these structures but I didn't get any tracks...
Do you know another way to investigate? is there any doc. on the SAP.help about this data element?
Thanks in advance for your suggestions.
Jak

Hi,
If you know the transaction where the field can be seen. Then run the trace on that transaction and in the Trace list you will see all the tables accesed during the tranasaction execution. Then you can get the correct table from the table list
Thanks,
Nagarjuna

I can not transfer files and data from macbook pro to my external hard drive, i can not transfer files and data from macbook pro to my external hard drive , so what should i do ?

i have an external hard disk but whenever i tried to transfer any file or data from macbook to this ext.disk its failed before that i used to have another hard drive with same problem ,then i thought may be this hard drive is not support mac then i bought a new one which supports mac but still i have same problem what should i do ?

Ok.
Go into Disk Utility, and make sure you select your external hard drive.
There should be 4 tabs, one being erase. I have taken a screenshot to show you what it should be set to (obviously name it what you like), and set the format to Mac OSX Extended (Journaled) as per the example below & after double checking your in the right drive, you can hit erase. And you're done! *hopefully*

User does not appear in group created from SAP role

Hello --
I have a user that has logged into InfoView successfully with SAP authentication and is showing in the CMC under the "User List." When I view the list of users in the group that was created from the SAP role he was a part of, he is not there. When I go to the user account and view "Member of," the group IS shown in the list.
Any idea? Any way I can "refresh" the group or anything like that?
Thanks
Casey

Thanks for the replies.
We are on XI 3.1 FP1.8 and we do have a CMS cluster. Server reboots this weekend seem to have resolved the problem. I am curious why this question was asked, though:
"Did you reassign the user to another SAP role after the user has already logged at least once in the InfoView?"
Is this something that could have caused the problem or is it a possible workaround if we run into the issue again?
Thanks again...
Casey

Need BAPI/RFC for Updating Category field of CRM_DNO_MONITOR from SAP R/3.

Hi SAP GURUS!!
I need to have a new field category in "Create support message" of the HELP menu in SAP server. This field values needs tobe updated with that of Category in Solution Manager ( CRM_DNO_MONITOR) .We have found a BADI (SBCOS001 ) where we designed the screen for having the new field. FOr updating the value of this field to sol man, is there any bapi or rfc ..
Thanks in Advance,
gopa.

Hi
Please check the following points.
1. Please check the settings that you maintained in the table CRMSUBTAB in ECC. You need to have an entry as follows:
User: CRM
Object: VENDOR_MAIN
U/D : DOWNLOAD
Object Class: VEND ( & not BUPA for this entry)
Function Module: PI_BP_VENDOR_MAIN_EXTRACT
The other entry (for upload) has similar but different values. (Refer to the OSS note 883162.)
2. Check if you have applied any filter settings in CRM for the adapter object VENDOR_MAIN.
Regards,
Srini.

Will not transfer songs to iPod from iTunes Library

I'm using an iPod mini (without video) and trying to sync with music on my Windows 2000 desktop. I've ripped music from my CD's and added them into the iTunes library. I'm saving my library on a network space. I plug in my iPod and auto-sync. The iPod appears to be syncing, but does not actually add any music. All the songs have checkmarks next to them, so that's not the problem. I've also tried to manually manage the music and drag the music to the iPod and the same thing happens. It's synced up the playlists I've created, but there isn't any music actually transferred to the iPod.
Any suggestions?

I updated the software on my iPod Shuffle and now it does not recognize any of my songs from the iTunes Library that were previously easily available. All the songs, except two recently added cd's, have an exclamation mark next to them. When researching, it says the files are no longer found ... I have to physically inport each song all over again in order for iTunes to recognize them ... what a pain that will be ... not very happy. I should not have updated the software and avoided all the hassle with re-importing my music. also not sure how to remove all of the exclamation marked music in my iTunes library. Not sure if this is the same issue you experienced??

I can not transfer my photo albums from my Ipad to my computer(Microsoft windows). I have spent some time arranging these albums into some order with each having it's own name.but when i transfer it to my computer the photo's are out of order

We have sorted our photo's into albums with each having their own headings on our Ipad. We have now downloaded these to our computer (Microsoft).The only problem is they did not save in the album order or have any reference to the name of the album. I was wondering if there is away to download our photo's by album from the ipad to a Microsoft computer or even to an extermal hard drive.

First of all, you should always save you photos on computer like any other digital camera.
Backup on iCloud or iTunes only backup your Camera Roll. The other photos should be already on the computer.
Note: Photos are not saved in iTunes, it's only a conduit between your iPhone and your photo managing software on computer.
What computer do you have?

Not transfer field KNA1-STCD2 from SAP R/3 4.70 to CRM 3.0

Similar Messages

Maybe you are looking for