Not transferring from the hard disk to the flash

Hi
this was the result that l got but the problem is that the file did not come from the hard disk into the flash memory the second time. I waited for at least 30mins and nothing happened. On top of the hyper terminal was the Transfer field which l used send and receive files sub at different times but the files do not transfer into the flash memory again. Pls could you advise me what more can l do, thanks.
rommon 1 > xmodem c2600-adventerprisek9-mz.124-9.t2.bin
Do not start the sending program yet...
         File size           Checksum   File name
     18836 bytes (0x4994)     0xd99d    bacdprompts/app-b-acd-2.1.2.2-ReadMe.txt
     24985 bytes (0x6199)     0xc81e    bacdprompts/app-b-acd-2.1.2.2.tcl
     35485 bytes (0x8a9d)     0x41de    bacdprompts/app-b-acd-aa-2.1.2.2.tcl
     75650 bytes (0x12782)    0x1ff9    bacdprompts/en_bacd_allagentsbusy.au
WARNING: All existing data in bootflash will be lost!
Invoke this application only for disaster recovery.
Do you wish to continue? y/n [n]: y
Ready to receive file c2600-adventerprisek9-mz.124-9.t2.bin ...

Hi
I can't start with the IOS. The point is that it is waiting for the files to be transferred which l do not understand. So what l do is to switch off the 2620XM but the result it says is that l am stopping the file from been transferred which is a real puzzle to me. Because at first the IOS is been transferred but why it is going back to the rommom mode still beats my imagination.

Similar Messages

I can no longer shoot directly into phaseone software since i use my new macbook pro with retina display. pictures are not transfered from the camera into captureone. anyone else with this problem? any solutions?

i can no longer shoot directly into phaseone software - neihter version 6 or 7 - since i use my new macbook pro with retina display. pictures are not transfered from the camera into captureone. anyone else with this problem? any solutions?

My eyes just glazed over...Please in the future break down each of your issues with paragraphs separated by two carriage returns. It would be much easier when trying to address your issues.
Go to Apple menu -> System Preferences -> Keyboard and Mouse -> Mouse
And edit your mouse settings to do what you want it to do.
Secondly, this is not the place to vent. If you have a complaint, there is:
http://www.apple.com/feedback/
or http://www.apple.com/contact/
We are just end users here helping other end users.
Third, from my understanding, it would appear you are concerned about the noise the hard drive makes when it falls asleep? Why not put your machine in screen saver mode instead? Apple menu -> System Preferences -> Energy Saver turn off all Energy Saver settings, or set them to run Never.
Fourth, if your machine was purchased just a few days ago, you may still be able to get an exchange from the store, quicker than you can get a repair done. You may want to look into that possibility.
Fifth, it does appear you found the Logic forum. I would persist in asking there how to solve your technical issue with Logic regarding the audio. It may be you don't have to do anything special to the hard drive. Remember audio can be transmitted by wire, avoiding ambient sounds.
Good luck!

The actual date is not transferred from the (PS) milestone

Hello ,
In an order with header billing plan dates that are value-based, the actual date is not transferred from the Project System (PS) milestone, even though the actual date of the assigned milestone was changed via transaction CJ20N.
We are repeatedly facing this error , I have applied Note number 1395078 but still once in a while I am still facing the issue
Regards
Muralidharan.S

Check the following path in SPRO
IMG - PS - Revenue & earning - planned revenues - Automatic Plan Revenue cal - Maintain Billing Plan Settings
There, you use the billing plan to plan dates on a WBS element whose payment requests or invoices relevant to sales are to be sent to customers.
The system updates the planned revenue and planned payment receipts to the relevant WBS element. The planned revenue is updated using the revenue element stored in the planning profile for the work breakdown structure and using the financial item assigned to the revenue element.
You make the settings given below for the billing plan. To do this, you carry out the following steps:
- Maintain billing plan type
- Maintain date description for billing plan
- Maintain revenue element for billing plan
- Assign billing plan type to project profile
Hope this can assist you.
Thanks & Regards
JP

My photos are not transferring from the cloud to my new phone

I bought a iPhone 5s when transferring my old photos from the cloud. Only 16 of the photos transferred to the new phone, the rest of them just say downloading. How do I get the rest of my photos?

If it appears to not be making any progress even though you have a strong wifi signal, sometimes turning the phone off, then back on will get things going again. Otherwise about all you can do is try restoring the backup again. If you still have the old phone, you could also try creating an iTunes backup, then restoring that backup to your new phone.

UoM is not transferred from the shipping document to the shipping cost doc

Hello,
I have a problem. The Unit of Measure of the sales orders selected in the Shipping document is not transferred when I create the Shipment Cost document. So when I try to calculate the cost of the price conditions, I am getting a message V1297 It is not possible the conversion of (blank) to KG
In the tab of shipping I can see all the sales order numbers from the shipping document, all the information is transferred with the exception of UoM.
I would appreciate any help for my problem.
Thanks

Hello Gustavo,
please clarify how is this problem related to Tranport Management System - you mean, you transported a change request to another system with these modifications and it's not working? (I believe this problem is more related to its own area - SD? - than to CTS).
I'm not an SD expert but, anyway, please check whether notes #102852 and #1010597 can help out (a customer with similar problems fixed this way).
Best regards,
Tomas Black

My pictures are not downloading from the cloud

I was doing a restore from the cloud on my new iPhone 5 every thing whent good. My pictures are still downloading (going on 20hr) what do i do?

Hi Lifebydesign101,
Welcome to the Support Communities!
I believe you are asking about Photo Stream here. However, pictures are not transferred from the iPad to the iPhone. I'll include some information about My Photo Stream and troubleshooting steps below:
iCloud: Set up Photo Stream
http://support.apple.com/kb/PH2605
iCloud: My Photo Stream troubleshooting
http://support.apple.com/kb/TS3989
I hope this information helps ....
Have a great day!
- Judy

Why are Network Settings not Transferring from a Master DMG to the Desitination

Hi people,
can anyone assist me with finding out why Network Settings are NOT transferred from a source Master HD to a DMG to a Destination HD.
I have many hours spent trying to debug this - any pointers to a solution would be greatly appreciated.
Background:
I administer about 400 Macs of mixed types / generations (iMacs - MacBooks - MacBook Pro's).
We create master setups for different locations / purposes around the Campus and transfer these masters to DMGs.
We then clone the various macs as needed from these DMGs using a variety of methods including local (FW800 - USB) and network transfers.
The newest master (staffHD at 10-8-2) works perfectly but trying to clone / copy it by any method leaves out the custom network settings and you only end up with the default Wi-Fi / Ethernet / Firewire with total loss of the additional services and custom proxy settings.
Methods used to date to try the transfer (all get the same null result)
to-from DMG using Disk Utility
to-from Sparse Image via Disk Utility
to-from DMG using Carbon Copy Cloner
to-from Sparse Image via Carbon Copy Cloner
direct to 'target disk' via FW800 using Disk Utility
direct to 'target disk via FW800 using Carbon Copy Cloner
direct to 'target disk via FW800 using rsync -aHv
direct to 'target disk via FW800 using cp -Rv
Everything BUT the network settings transfer perfectly (excluding of course the usual trackpad / mouse custom settings).
I guess something is wrong with this master source but for the life of me I can't work it out. I have seen it in the past but it seemed to work itself out with the next revision - this one just wont.
HELP!
Have a Great day!
pete

Hi Linc,
thanks for the reply - I suspected a hardware issue or some sort of privledges problem, but as far as I know have only had this problem with Mountain Lion, and it still fails on hardware like to like transfers. I was hoping to avoid needing anything addidtional but it looks like I'll have to.
Have a Great day!
pete

I can't import my movies to work on them. They are coming from a external hard drive, not directly from the camera, its type mpeg-e (.mts)

My movies are type MPEG-2
I can't import my movies to work on them. They are coming from a external hard drive, not directly from the camera, its type mpeg-2 (.mts)
What can I do ?

1. Is your external HD connected by firewire?
2. mpeg2 is the final compressed delivery format of a DVD, not intended for editing, and iMovie cannot handle such files, so you need to convert them first:
For that you need mpegStreamclip:
http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
which is free, but you must also have the Apple mpeg2 plugin :
http://www.apple.com/quicktime/mpeg2/
which is a mere $20.

Why my apps are not transferring from PC to iPhone 5? When I connected to PC the icon shows when I select apps it show 'will install' but it never show on iPhone, I re installed iTunes, deleted all apps and downloaded again but its not working pls help.

Why my apps are not transferring from PC to iPhone 5? When I connected to PC the icon shows when I select apps it show 'will install' but it never show on iPhone, I re installed iTunes, deleted all apps and downloaded again but its not working pls help.

Next time an app update gets stuck try a reset. Press and hold both the home and power buttons for10-15 seconds till the Apple logo appears. Then release both buttons. Wait till your iPad starts on it's own. Try now. Also YouTube is still available. If you can't find it the the app store go to the bottom of the app store page and tap purchased. All your deleted apps will be listed and you can reinstall YouTube from there.

Transferred backed-up data from external hard disk to new hard drive on my MacBook Pro which seemed to be successful. I now find that some (or maybe all) old emails have been resent. Can anyone tell me what has happened?

Transferred backed-up data from external hard disk to new hard drive on my MacBook Pro which seemed to be successful. I now find that some (or maybe all) old emails have been resent. Can anyone tell me what has happened?

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

IPod Classic 160GB film library sync problem - trying to sync films that have converted from purchased DVD to mp4 format locally, not purchases from the online store - all other libraries sync perfect - why?

Hello Apple and the iTunes Windows PC users community.
I am trying to sync films that I have converted from purchased DVD to mp4 format locally, not purchases from the online store. The mp4s all appear and play successfully in my iTunes application but will not sync across to the iPod film library folder.
For your information: I am using iTunes 11.1.3.8 on a Windows 7 64bit machine with 500GB hard disk and 8GB of Ram in the UK.
I have restored the iPod classic 160GB three times now to see if it was a hardware problem with no joy. Each time all the music restores properly as do the podcasts and all the items in TV programmes all appear to sync and work fine.
I have also tried to copy films into the TV Programmes to get around it with no joy. They always go to the films section to start with. It is just the Films library that does not sync - all others work perfectly. As a last resort I have uninstalled and re-installed iTunes with no joy either.
I am technically savvy and have gone through the itunes and ipod settings but nothing appears to make a difference - This is the first time I have had to post here as I can usually solve the majority of the ipod anomilies but this one has me flummoxed.
Has the film encoding type changed in the newest itunes update? - Has this happened to anybody else and is it a hardware, software, or operating system problem.

Having uninstalled the current version 11.1.3.8 and loaded and older version of iTunes 10.7.0.21 I can now categorically confirm that the newest update seems to be causing the problem as the films and TV Programmes are syncing perfectly on this older version.
If you are going to do this please dont forget to remove the ' iTunes Library.itl' file as this stops the older versions from running as I've just found out

Mac Mini i7 (Mavericks) will not boot from the external drive

Mac Mini i7 (Mavericks) will not boot from the external drive with Disk Warroir 4.4. or Drive Genius or Lion.
Not even from the external Firewire hard drive with Mavericks

Does the external HD have a GUID partition table?
Is the external drive formatted Mac OS X Extended (journaled)?
Is this a 2011 or late 2012 Mac?
How was Mavericks installed on the external drive?
Who is the builder of the drive mechanism in the external drive?
Who is the builder of the external enclosure?
What type of interface does the external drive have USB2, USB3, Firewire 400, Firewire 800, thunderbolt?
Is the external enclosure directly connected to the mini?
Have youtried a different interface cable?

Adobe Media Encoder for CS4 error Could not read from the source

Hello,
I get an error when I try to export from Premiere CS4. It doesn't matter how I export. Seems like an easy fix, but I can't figure it out. Any help is appreciated:
- Source File: C:\DOCUME~1\ARTWHI~1\LOCALS~1\Temp\extra and b roll.prproj
- Output File: E:\Living Accused Movie Transfers\video\Cindy at table.avi
- Preset Used: NTSC DV
- Video:
- Audio:
- Bitrate:
- Encoding Time: 16:10:34
1/21/2009 9:50:25 PM : Encoding Failed
Could not read from the source. Please check if it has moved or been
deleted.
Thank you
Art

When you attempt to encode media with Adobe Media Encoder CS4 on Windows, the following error message appears in the text file (AMEEncodingErrorLog.txt) that opens when you click the error icon: "Encoding Failed. Could not read from the source. Please check if it has moved or been deleted."
If it's that correct, you removed an earlier version of Adobe Premiere Pro or Adobe Creative Suite on the same computer.
Do one or both of the following solutions:
Solution 1: Create a shortcut to the Premiere Pro executable file, rename the shortcut to Premiere, and move the shortcut to C:\Program Files\Common Files\Adobe\dynamiclink.
Close all Adobe applications.
In Windows Explorer, navigate to C:\Program Files\Adobe\Adobe Premiere Pro CS4. (If you installed Premiere Pro CS4 in a location other than the default of C:\Program Files\Adobe, then navigate to your custom installation location.)
Right-click on Adobe Premiere Pro.exe (which might appear without the .exe extension) and choose Create Shortcut.
Rename the newly created shortcut to just Premiere.
Important: The name of the shortcut must be exactly Premiere with no other characters.
Open a second Windows Explorer window, and navigate to C:\Program Files\Common Files\Adobe\dynamiclink.
Move the Premiere shortcut that you created into the dynamiclink folder.
Solution 2: Remove and reinstall all Premiere Pro CS4 components or all Adobe Creative Suite 4 components.
Do one of the following:
Windows XP: Choose Start > Control Panel > Add or Remove Programs.
Windows Vista: Choose Start > Control Panel > Programs and Features.
In the list of installed programs, select Adobe Premiere Pro CS4, Adobe Creative Suite 4 Production Premium, or Adobe Creative Suite 4 Master Collection.
Click Change/Remove (Windows XP) or Uninstall (Windows Vista).
Follow the on-screen instructions to remove all components of Premiere Pro CS4 (including Adobe Encore CS4 and Adobe OnLocation CS4) or to remove all components of your edition of Adobe Creative Suite 4.
Re-install your Adobe software.

I have moved my iTunes library to a new Windows 7 PC and cannot transfer music from the new iTunes PC to my iPhone. The iPhone only accepts transfers from the original iTunes PC.

I have moved my iTunes library to a new Windows 7 PC and cannot transfer music from the new iTunes PC to my iPhone 4S. The iPhone will only accept music transfers from the original iTunes PC. I have come to understand that an iPhone can have only one "daddy" iTunes PC, but have not been able to find out how to change the "daddy". I have done a backup of the iPhone, and a "Restore to Original Settings". Then I restored the content using the new iTunes PC. My Apps and contacts, etc. are back on the iPhone, but it still won't accept music from the new iTunes PC.

What happens when you try to sync the iphone to the new computer?

Encoding Failed- Could Not Read from the Source

I have a quickly approaching deadline for the short film I am working on, and it would be greatly appreciated if anyone knew anything of my predicament. Everytime I try to export anything from Premiere Pro (CS4 of course), when I start the queue it says "Could Not Read from the Source. Please check if it has been moved or deleted." The files, of course, have not been moved or deleted, and the raw footage for the film is in the same place as everything else. All my scratch disks are set to the same folder, etc. I don't understand, and it won't even let me export to my camera. It says it does, but when I check my camera, it's nothing but blank tape. Any (quick) help would be very much appreciated!
Thank you.

Not transferring from the hard disk to the flash

Similar Messages

Maybe you are looking for