Not turning to the side

Hello. My ipad is not turning to the side and it not on locked orantation thingy. The only way it turns if i turn it off and turn it the the postion i want only . This is hard because most apps work with motions to side side help,,,,

If there isn't a lock symbol at the top of the screen next to the battery indicator then try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
If there is a lock symbol, then depending on what you've got Settings > General > Use Side Switch To set to (rotation lock or mute notifications), then you can lock/unlock the rotation by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

Similar Messages

  • Why cant my pictures turn to the side?

    My videos and pictures will not turn to the side horizontal, neither will my itunes music! Can anyone help?

    Try This...
    Close All Open Apps... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... (But can take Longer..)
    Release the Buttons..
    A lease wrote:
    My videos and pictures will not turn to the side horizontal, neither will my itunes music!
    Swipe up from the bottom on the screen to get to Control Centre...
    The button on the right is the Rotation lock... Turn it off.
    See  >  http://support.apple.com/kb/ts3805

  • I could not turn up the volume on my iPad using the volume button on the side. Is there any way to fix this?

    I could not turn up the sound (volume) on my iPad 2 using the volume button on the side. This happens after I have reduced the volume to minimum using the same volume button. The volume indicator does not move up at all. Note: it was not on mute, so the issue seems to be the button.

    Try this and see if it works.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • How can you minimize or (turn) off the "side panel" in Web Intelligence in the view mode.

    How can you minimize or (turn) off the "side panel" in Web Intelligence in the view mode.
    It is possible to turn on/off options within the Side Panel by Customization of Groups.
    But it seems You cannot influence the way Web Intelligence present (minimized or Off) the Side Panel in the IE??
    Is there a solution for this??
    If not, it would be a nice property of a Web Intelligence document in a future release.

    Hi Nico,
    we patched up to BI 4.1 SP 3 Patch 2
    and look look
    click side panel to minimize
    so .. patch patch ...

  • I am on Vacations in Nicaragua and I just lost my Ipod. I did not turned on the ICloud. How can I use "Find my Ipod".? please help me?

    I am on Vacations in Nicaragua and I just lost my Ipod. I did not turned on the ICloud. How can I use "Find my Ipod".? please help me.

    You cannot use it.  You would have had to set it up on your ipod itself before you lost it.  Since you did not "turn on the icloud", then you have not set up find my ipod.
    Sorry.
    There is no way to track your ipod.

  • How do I force the player to open in the center of my screen every time, and not way on the side?

    How do I force the player to open in the center of my screen every time, and not way on the side?

    Solution is very simple, Just choose firefox as your default browser.
    Follow these steps :
    * Open '''Options'''
    * Click on '''Advanced'''
    * Now open '''General''' tab and click on '''Make FireFox The Default Browser'''. See Image below.

  • I just subscribed to imatch while logged in to iTunes on a mac computer that belongs to someone else. (I was logged in to MY iTunes)  my iPhone will not turn on the MATCH function, saying I am no subscribed. I've powered off and on.  can anyone help?

    I just subscribed to imatch while logged in to iTunes on a mac computer that belongs to someone else. (I was logged in to MY iTunes)  my iPhone will not turn on the MATCH function, saying I am no subscribed. I've powered off and on.  can anyone help?

    Hi,
    I am having the same problem. Itunes reports that it's uploaded all the music etc.
    When I turn the match function on, it says "you are not currently subscribed to itunes match".
    I have restarted the phone and coputer, logged in & out several times to no avail.
    Any ideas or suggestions?

  • Can not turn on the ipad

    I can not turn on the ipad as usual, how can I do?

    Just a thought - have you charged the battery? You could try putting on the wall charger for about an hour and see if it will turn on. If that's not the issue, You may need to restore the iPad now if nothing else will work for you. Look through the troubleshooting steps in this article and at the end are the instructions for restoring the iPad.
    http://support.apple.com/kb/TS3281
    There is also a link to another kb article that will instruct you on how to put the iPad into recovery mode if the device is not recognized in iTunes.

  • Can not turn on the PC

    can not turn on the PC
    When I turn on the pc it goes to a blue background restore your computer needs to be repaired
    не могу включить пк
    Когда я включаю пк там выходит в синем фоне восстановления ваш компьютер нуждается в ремонте

    The document here shows how to do a System Recovery using F11 at power on. Follow the section on "Recovery when Windows does not start correctly":
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&​lc=en&cc=us&dlc=en&lc=en&product=5​...
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • HP 34401A-When I run the Read Meas.vi, it has error if I do not turn off the data storage

    When I run the Read Meas.vi, it has error if I do not turn off the data storage. The same thing happen when I run the App. Example. vi. Anyone knows how to solve this problem? Thanks alot.
    KL

    LoganS wrote:
    Hi KL,
    The Read Meas.vi is one of the subvi's in the App. Example.vi, so this problem is most likely the same problem in each case. From the help for Read Meas.vi:
    Data Storage instructs the device to store the data to be sent to either the internal or external buffer. If TRUE (default), the VI stores data in the on mode. If FALSE, the VI does not retain data in the off mode. Use the off mode only with the average min/max operation when you do not need to retrieve data. You cannot configure the meter for external buffering in the off mode.
    So the question is, are you trying to retrieve any data? If so, then as indicated in the above paragraph, you cannot retrieve data and have the data storage turned off. Good luck!
    Logan S.
    Yes, I need to retrieve data. So due to that problem, I cannot really get any data. I am not sure is that problem is due to the USB GPIB or not. But once I click on the click arrow, everying goes fine from initialise, measurment... once it comes to Read measurment, it has error (say somthing like: VISA Wait on Event for RQS.vi->HP34401A Read Meas.vi->Untitled 1) I have no idea like what it shows up.
    KL

  • My iMac will not turn on, the screen stays black, makes a whistling sound 3 short, 3 long, 3 short, well maintained while keeping on, what solution do you have?

    My iMac will not turn on, the screen stays black, makes a whistling sound 3 short, 3 long, 3 short, well maintained while keeping on, what solution do you have?

    For some reason its firmware seems to have been corrupted. Read:
    About the Firmware Restoration CD (Intel-based Macs)
    iMac (Mid 2007) and later models: About startup tones

  • My iPod touch will not turn on the screen is black?

    My iPod touch will not turn on the screen is black?

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • My 2008 macbook will not turn on. the light on the corner is on. not flashing but on. its fully charged and has lion on it. please help! my classes start Monday and i need it before then!!

    my 2008 macbook will not turn on. the light on the corner is on. not flashing but on. its fully charged and has lion on it. please help! my classes start Monday and i need it before then!! It will turn on for a coupe seconds, and then turn off.

    Take it into an Apple store for evaluation.

  • Why my Iphone 4 sometimes does not turn on the display?

    Why My Iphone 4 sometimes does not turn on the display?

    Did you already try the steps mentioned in this article?
    iOS: Not responding or does not turn on

  • My macbook will not turn on, the charger blinks between green and orange and the charge indicator on the side shows no light. HELP nothing happened just stopped working out of the blue

    I don't know why but my computer will not turn on! Less than 6 months old!

    If you have access to an Apple Store or other authorized Apple specialist with service department, you could take the computer in for diagnosis and repair under the AppleCare plan. Or the complementary coverage that comes with the computer if you did not buy the extended plan to add a few more years on the basic one. With the basic plan, you have 90-days support; if you bought the AppleCare extended plan, you have a total of three years support and service. Within the first year (from day of original purchase) you can buy the extended plan. Without it, a fee may be charged to test the computer. Or if there is an Apple Store with Genius bar, you could arrange to get an appointment there, and there should be no charge (in USA) to diagnose the problem.
    You can get started online, by visiting Apple Support:
    http://www.apple.com/support/contact/
    Not sure what is wrong with the computer, but an expert could tell.
    Also if you have an Apple Store nearby (or within reasonable distance) you could call ahead to set an appointment to talk to a Genius, and have them look into the issue(s) the computer may have. One determined to need repair under AppleCare can be handed off, there.
    Did you have a backup method in place to save your work off the computer, such as TimeMachine and external hard drive? I mention this because a computer going into the shop for possible repair may lose its content, and the hard drive or other parts may have failed, so your saved stuff in there could be lost.
    Hopefully they can get the problem solved.
    Good luck & happy computing!

Maybe you are looking for

  • Need help to show a thumbnail image column in report

    Hi, Gurus: I need to display a column of thumbnail images in a classical report. I follow the thread https://kr.forums.oracle.com/forums/thread.jspa?threadID=2201667 I am using APEX 4.1, Oracle 11gR2 Here is my table: CREATE TABLE "SORS"."SOR_IMAGE"

  • RFC- XI- Web services

    Hi All,       We are configuring RFC->XI->Web Services scenario. We are using SOAP adapter in the receiver side. We are getting the following error message. soap fault: System.Web.Services.Protocols.SoapException: Server did not recognize the value o

  • [NQQuery log]: Physical SQL generated agaisnt 2 Database in OBIEE 11g

    Hi Experts, I have a problem regarding the physical SQL generated by Query log. So this is the setup. SCENARIO 1: Oracle Data Warehouse DB - col1 - col2 - col3 OLAP_OBIEE - col4 When I run these columns together in Analysis. It seems like the physica

  • Job to schedule every 8 hours daily...

    Hello In our loads we need to load daily and every 8 hourly once. I have created the process chains in the following way. 1) on start variant of the process chain under "Date/Time" i had given the start date and time. 2) Under periodic values window

  • DAC - no connection to DAC server

    hello All Our Environment Details: Dac Build AN 10.1.3.4.1.patch.20091011.0443 Informatica 8.1.1.SP5 OBIEE 10.1.3.4.1 Siebel 7.8.2.7 SUN OS 5.10 Generic_141414-10 sun4u sparc OLTP/Informatica/DAC repository on Oracle 10g OLAP : Teradata Sporadically