Not updating data in Tcode "RBT_ENH_GEN"

Actualy I have created S955 Infostructure using MC21 and updated using MC24. using append structure (ZAS955)I have appended one structure with S955 and activated table.now everything ok.but my scenario was not wrking.Now I went to MC22 regenerate the Info structure.table S955 automaticaly becomes inactive status.I m getting error message in Mc22,S955 table not activated.In this Tcode only I m getting error "RBT_ENH_GEN" table is not updating...

Similar Messages

Background job not updating data for some steps of program

We have created a custom program and submitting the standard program RPRCCC_READ_KR1025
which is used for conversion of AMEX credit card files.
Since this program can update data for 1 company id at a time,we have created a background job
for that program with 10 steps and 10 variants of data related to 10 different company codes.
when this job is executed it is not updating data for all the 10 files , sometimes it updates 5,7,etc...
If we execute the other files which didnt update in job manually they are getting updated.
All the files executed with that program can be seen in PRTA transaction.
Regards,
Gautham.
Edit: Solved.
Since the standard program updates the database every time with commit work
there should be some time until the next database update,so we can use wait command
after the submit statement which will do the trick.
Edited by: Gautham Vangaveti on Aug 5, 2010 7:20 PM

Hi,
I mean B(Sub Assembly)
Item Rollup Flag
A No
--B Yes
---B1 No
---B2 No
---B3 No
--C Yes
In this case when we run cost rollup by giving item A, Oracle will consider below structure.
A
--C
Regards,
Sarvottam.

Dataguard - logical standby - need help - not updating data at commit

Hi
Need help ?
We have logical standby setup where data is not updated at standby when committed at Primary. It only updates when alter system swith logfile.
On Primary:
log_archive_dest_2='service=xxStandby LGWR ASYNC valid_for=(online_logfiles,primary_role) db_unique_name=xxStandby'
On Standby:
we have already created standby redo logs ( 1+ # redo logs)
we used ALTER DATABASE START LOGICAL STANDBY APPLY IMMEDIATE NODELAY;
The data only ships when we do the ALTER SYSTEM SWITCH LOGFILE whereas it should so when data is commited on the primary.
Is there anything we are missing or need attention.
Please help
Thanks you so much

Yes, I have standby redo logs = ( 1 + # redo logs on the primary) and are of same size.
I also changed the log_archive_dest_2 setting for valid_for to ALL_LOGFILES, but the performance is still very slow... we are now overr 9 hrs behind the primary.
log_archive_dest_2='service=xxStandby LGWR ASYNC valid_for=(ALL_LOGFILES,primary_role) db_unique_name=xxStandby'
The Logical standby performance reallly not good at all. trying to increase sga/pga more ... hoping this will speed up some
Paul

OPC Server does not update data value

Hello,
I have a problem with a program that uses an OPC server to comunicate with a PLC.
It happens randomly, when I update the data, i cannot see any patern, sometimes it happens quickly, sometimes it takes longer...
The data socket is declared like that:
hr = DS_OpenEx ("psp://localhost/Server/Automate.405466", DSConst_WriteAutoUpdate, NULL, NULL, DSConst_EventModel, TIMEOUT_OPC_mSEC, &ecr_MW5465);
And is update like this:
hr = DS_SetDataValue(ecr_MW5465, CAVT_SHORT, l_buf, 1, 0);
The function does not return any error, but the value is not updated server side.
Lookout version is 6.6, the program is made with CVI 8.5.1 and communication is in ethernet modbus. I do not know if further details could be useful.
Thank you.

Fred,
Can you read the value being updated directly from the OPC server? Usually you can just view the values and see if they are updating.
The next thing to check would be to use the shared variable monitor to see if the variables that are bound to the OPC server are updating. It is under Tools >> Shared Variable >> Variable Manager.
Also, when you have the program running, do you get any type of error from reading the shared variable? If you are seeing an error, it would give us a little more insight into what is going on.
Brian Coalson
Software Engineer
National Instruments

Workflow 12300111 not updating data .

Hi experts,
i am trying to use workflow 12300111 for ESS leave request .
the workflow is not updating the values in the table for absence ie; PA2001
Please suggest what can be done .
thanks in advace,
Naval bhatt

@ Arg
which method do we have to use in TS12300097
i have tried with
class - CL_PT_REQ_WF_ATTRIBS
method- APPROVE
and
BO -ABSENCE
method- APPROVE
please suggest me if i am doing something wrong in this .
please tell me which roles are required for updating the absence.
thanks,
Naval

Date is not updating while accessing Tcode Zprojects

Dear experts
In Tcode :Zprojects
I have entered the Project like 0040 after executing this Project
the date which is showing "Last Process Date ' is older one, it doesnt showing current one
how to correct this option
Kindly give me good solution for this problem
Regards
krishnamoorthy.p
Edited by: krishna murthy on Mar 30, 2010 8:23 AM

Hi Krishna,
You must be aware of that Y* and z* are customer name space given by SAP. We can not see the tcode you have given, untill your security guys are generous enough to let us in your SAP system :).
Debug and ask any specific problem you faced.

Can not update data in table view

When i open a table from a connection in the connection navigator i can not alter the data in it... I can only add new rows. Is there a setting so i can alter the data?
My user has update rights because when i write my own update statement and execute it, it works fine.

I found the issue... You can do it in 10g but you have to define a PK on the table, otherwhise he does not know what row to update. When i added a PK i could edit the data in Jdev in data view.

BAPI BAPI_ALM_ORDER_MAINTAIN is not updating data

Hi Experts,
i am facing a problem in using 'BAPI_ALM_ORDER_MAINTAIN' objective is to use this FM for inserting an operation activity or updating description of exisitng operation for one of service order.
at the end of execution it does not give any error message. this is what i get after execution: 085 Order 4000060 saved with notification 300000000 ; but actual data is not getting updated in system.
current verison of system is ECC 6.0. this is what i am passing to this FM
IT_METHODS
000001 HEADER                           CHANGE                           000004000060
000001 OPERATION                        CHANGE                           0000040000600030
000001                                  SAVE                             000004000060
IT_HEADER
ORDERID
4000060
IT_OPERATION
ACTI                             DESCRIPTION
0030                                 TEST-TEST
IT_OPERATION_UP
D
X
I have tried without passing order data to this function module too, please help
regards
Subhash
Edited by: subhash soni on Aug 18, 2008 2:00 PM

Found a solution, was not executing bapi_transaction_commit at the end of execution

Mail App not updating date and time

Hey guys,
Has anyone else has this problem: My Mail app isn't updating the date and time at the bottom of my screen. (In between, the refresh button on the left and the new draft button on the right) Not sure how to fix it...
Thanks in advance!

Click on View on the top menu, click on Columns, and then click on "Date Received" to select it. Once it is checked, the Date and Time will display.
Cheers,
GB

Data Not updated in BDC

hi alll
1.   i have written below coding for vendor master update. i have two records in text file, in that first record not updated. while updating its shows error. but second record updated. how can i solve. plse help me
2. I want to show the error message or i want to print how can i do it
REPORT ZVENTESTBDC.
data : begin of it_xk01 occurs 0,
         LIFNR(10) type c,
         BUKRS(4) type c,
         EKORG(4) type c,
         KTOKK(4) type c,
         NAME1(30) type c,
         SORT1(10) type c,
         LAND1(3) type c,
         AKONT(10) type c,
         FDGRV(10) type c,
         WAERS(3) type c,
      end of it_xk01.
DATA : IT_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
       IT_BDCMSGCOLL LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
   FILENAME                      = 'C:\Documents and Settings\entegall\Desktop\vendor.txt'
   FILETYPE                      = 'ASC'
   HAS_FIELD_SEPARATOR           = 'X'
HEADER_LENGTH                 = 0
READ_BY_LINE                  = 'X'
DAT_MODE                      = ' '
CODEPAGE                      = ' '
IGNORE_CERR                   = ABAP_TRUE
REPLACEMENT                   = '#'
CHECK_BOM                     = ' '
VIRUS_SCAN_PROFILE            =
NO_AUTH_CHECK                 = ' '
IMPORTING
FILELENGTH                    =
HEADER                        =
TABLES
    DATA_TAB                      = it_xk01.
loop at it_xk01.
   refresh it_bdcdata.
perform open_group.
perform bdc_dynpro      using 'SAPMF02K' '0100'.
perform bdc_field       using 'BDC_CURSOR'
                              'RF02K-REF_LIFNR'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RF02K-LIFNR'
                               it_xk01-lifnr.
perform bdc_field       using 'RF02K-BUKRS'
                              IT_XK01-BUKRS.
perform bdc_field       using 'RF02K-EKORG'
                              IT_XK01-EKORG.
perform bdc_field       using 'RF02K-KTOKK'
                              IT_XK01-KTOKK.
perform bdc_dynpro      using 'SAPMF02K' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFA1-LAND1'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'LFA1-NAME1'
                              IT_XK01-NAME1.
perform bdc_field       using 'LFA1-SORTL'
                               IT_XK01-SORT1.
perform bdc_field       using 'LFA1-NAME2'
perform bdc_field       using 'LFA1-LAND1'
                              IT_XK01-LAND1.
perform bdc_dynpro      using 'SAPMF02K' '0120'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFA1-KUNNR'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_dynpro      using 'SAPMF02K' '0130'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFBK-BANKS(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ENTR'.
perform bdc_dynpro      using 'SAPMF02K' '0210'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFB1-FDGRV'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'LFB1-AKONT'
                              IT_XK01-AKONT.
perform bdc_field       using 'LFB1-FDGRV'
                              IT_XK01-FDGRV.
perform bdc_dynpro      using 'SAPMF02K' '0215'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFB1-ZTERM'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_dynpro      using 'SAPMF02K' '0220'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFB5-MAHNA'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_dynpro      using 'SAPMF02K' '0310'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFM1-WAERS'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'LFM1-WAERS'
                              IT_XK01-WAERS.
perform bdc_dynpro      using 'SAPMF02K' '0320'.
perform bdc_field       using 'BDC_CURSOR'
                              'RF02K-LIFNR'.
perform bdc_field       using 'BDC_OKCODE'
                              '=UPDA'.
*perform bdc_transaction using 'XK01' using IT_BDCDATA mode 'A' UPDATE 'S'
CALL TRANSACTION 'XK01' USING IT_BDCDATA
                        MODE 'A'
                       UPDATE 'S' MESSAGES INTO IT_BDCMSGCOLL.
*perform close_group.
endloop.
FORM BDC_DYNPRO USING PROG SCR.
CLEAR IT_BDCDATA.
IT_BDCDATA-PROGRAM = PROG.
IT_BDCDATA-DYNPRO = SCR.
IT_BDCDATA-DYNBEGIN = 'X'.
APPEND IT_BDCDATA.
ENDFORM.
FORM BDC_FIELD USING FNAM FVAL.
CLEAR IT_BDCDATA.
IT_BDCDATA-FNAM = FNAM.
IT_BDCDATA-FVAL = FVAL.
APPEND IT_BDCDATA.
ENDFORM.

go through this porgarm u will get the clear picture about down loading the error msg.
PROGRAM ID     : ZSD_CONDREC_DISCOUNT_ZSWD
DESCRIPTION    : BDC PROGRAM TO UPLOAD CONDITION RECORDS FOR Discount
TRANSACTION    : VK11
CONDITION TYPE : ZSWD(Key combination 3)
VERSION        : 1.0
Text Elements
001 : Select Options
002 : C:\SD\Error\Discount-ZSWD
003 : Error Download Path
004 : C:\SD\Error\Discount-ZSWD - DDMMYYYY HH:MM:SS.txt
REPORT ZSD_CONDREC_DISCOUNT_ZSWD
       MESSAGE-ID 00.
*include bdcrecx1.
TABLES : t100.
       Internal table declaration                                    *
DATA : BEGIN OF it_price OCCURS 0,
              index(4),      "Index
              kschl(4),      "Condition type
              vkorg(4),      "Sales organization
              vtweg(2),      "distribution channel
              spart(2),      "Division
              matnr(18),     "Material no
              kbetr(11),     "Rate
              konwa(5),      "Rate unit (currency or percentage)
              kmein(3),      "Condition unit
              krech(1),      "Calculation type for condition
              datab(10),     "Validity start date
              datbi(10),     "Validity end date
              er_message(100),
       END OF it_price.
Internal table to get the error data                                 *
DATA : it_error LIKE it_price OCCURS 0 WITH HEADER LINE.
DATA : bdcdata LIKE bdcdata OCCURS 0 WITH HEADER LINE.
DATA : i_msgtab LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE.
Internal table to find the error from the legacy data                *
DATA : BEGIN OF it_erfind OCCURS 0,
              index(4),      "Index
              er_message(100), "For Error Message
       END OF it_erfind.
Variables declaration                                                *
DATA : g_message(200),
       time(10),
       date(10) ,
       v_error_filename LIKE rlgrap-filename.
date      = sy-datum.
time      = sy-uzeit.
       Initialization
INITIALIZATION.
Generating Error file name with date and time.
PERFORM make_file_name.
       Selection Screen                                              *
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETER: p_file LIKE ibipparms-path OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(30) text-003.
SELECTION-SCREEN COMMENT 33(79) text-004.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN:END OF BLOCK b1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file .
PERFORM get_filename.
Start of selection
START-OF-SELECTION.
PERFORM upload_data.
PERFORM fill_data.
END-OF-SELECTION.
*&      Form fill_data
      text
FORM fill_data.
LOOP AT it_price.
*Start of Screen 1
    PERFORM bdc_dynpro      USING 'SAPMV13A' '0100'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'RV13A-KSCHL'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '=ANTA'.
    PERFORM bdc_field       USING 'RV13A-KSCHL'
                                  it_price-kschl.
Key Combination: Sales org / Dist. channel / Division / Material
    PERFORM bdc_dynpro      USING 'SAPLV14A' '0100'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'RV130-SELKZ(03)'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '=WEIT'.
    PERFORM bdc_field       USING 'RV130-SELKZ(03)'
                                  'X'.
*Start of Screen 2
    PERFORM bdc_dynpro      USING 'SAPMV13A' '1800'.
    PERFORM bdc_field       USING 'KOMG-VKORG'
                                  it_price-vkorg.
    PERFORM bdc_field       USING 'KOMG-VTWEG'
                                  it_price-vtweg.
    PERFORM bdc_field       USING 'KOMG-SPART'
                                  it_price-spart.
    PERFORM bdc_field       USING 'KOMG-MATNR(01)'
                                  it_price-matnr.
    PERFORM bdc_field       USING 'KONP-KBETR(01)'
                                  it_price-kbetr.
    PERFORM bdc_field       USING 'KONP-KONWA(01)'
                                  it_price-konwa.
    PERFORM bdc_field       USING 'KONP-KMEIN(01)'
                                  it_price-kmein.
    PERFORM bdc_field       USING 'RV13A-KRECH(01)'
                                  it_price-krech.
    PERFORM bdc_field       USING 'RV13A-DATAB(01)'
                                  it_price-datab.
    PERFORM bdc_field       USING 'RV13A-DATBI(01)'
                                  it_price-datbi.
           perform bdc_dynpro      using 'SAPMV13A' '1821'.
           perform bdc_field       using 'BDC_CURSOR'
                                         'KOMG-MATNR'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '=SICH'.                    "Save the entry
    PERFORM bdc_transaction TABLES i_msgtab USING 'VK11' 'N' 'L'.
*To fetch the error message from the standard error table
    SELECT SINGLE * FROM t100 WHERE sprsl = 'E'
                               AND arbgb = sy-msgid
                               AND msgnr = sy-msgno.
    g_message = t100-text.
*subroutine to change the error message for every document number
    PERFORM replace_parameters USING sy-msgv1
                                      sy-msgv2
                                      sy-msgv3
                                      sy-msgv4
                            CHANGING g_message.
    WRITE: / 'System variables:'.
    SKIP.
    WRITE: / '        Sy-msgty:', sy-msgty.
    WRITE: / '        Sy-msgid:', sy-msgid.
    WRITE: / '        Sy-msgno:', sy-msgno.
    WRITE: / '        Sy-msgv1:', sy-msgv1.
    WRITE: / '        Sy-msgv2:', sy-msgv2.
    WRITE: / '        Sy-msgv3:', sy-msgv3.
    WRITE: / '        Sy-msgv4:', sy-msgv4.
    SKIP.
    WRITE: / 'Message:'.
    SKIP.
    WRITE: / sy-msgty, g_message.
*To find out the error in the legacy data if there is anything and pass
*the document no with error message to the seperate internal table
*called it_erfind
    IF sy-msgty = 'E'.
      it_erfind-index = it_price-index.
      it_erfind-er_message = g_message.
      APPEND it_erfind.
    ENDIF.
*Finally we are segregating the error and downloading the error data.
    AT LAST.
*To segregate the error
      PERFORM segregate_error.
*To download the error from it_error internal table with err mesg
      PERFORM error_download.
      PERFORM display_message.
    ENDAT.
ENDLOOP.
           perform close_group.
CLEAR it_price.
ENDFORM.                    "fill_data
*Subrotine to replace the parameters
FORM replace_parameters USING p_par_1 p_par_2 p_par_3
                              p_par_4 CHANGING p_message.
erst mal pruefen, ob numerierte Parameter verwendet wurden
DO.
    REPLACE '&1' WITH p_par_1 INTO p_message.
    IF sy-subrc <> 0.
      EXIT.
    ENDIF.
ENDDO.
DO.
    REPLACE '&2' WITH p_par_2 INTO p_message.
    IF sy-subrc <> 0.
      EXIT.
    ENDIF.
ENDDO.
DO.
    REPLACE '&3' WITH p_par_3 INTO p_message.
    IF sy-subrc <> 0.
      EXIT.
    ENDIF.
ENDDO.
DO.
    REPLACE '&4' WITH p_par_4 INTO p_message.
    IF sy-subrc <> 0.
      EXIT.
    ENDIF.
ENDDO.
falls keine numerierten Parameter vorh., ersetzen wie gehabt
REPLACE '&' WITH p_par_1 INTO p_message.
CONDENSE p_message.
IF sy-subrc EQ 0.
    REPLACE '&' WITH p_par_2 INTO p_message.
    CONDENSE p_message.
    IF sy-subrc EQ 0.
      REPLACE '&' WITH p_par_3 INTO p_message.
      CONDENSE p_message.
      IF sy-subrc EQ 0.
        REPLACE '&' WITH p_par_4 INTO p_message.
        CONDENSE p_message.
      ENDIF.
    ENDIF.
ENDIF.
ENDFORM.                    "REPLACE_PARAMETERS
*Subroutine to segregate the error data from the legacy data
FORM segregate_error.
LOOP AT it_erfind.
    LOOP AT it_price WHERE index = it_erfind-index.
      MOVE-CORRESPONDING it_price TO it_error.
      it_error-er_message = it_erfind-er_message.
      APPEND it_error.
    ENDLOOP.
ENDLOOP.
ENDFORM.                    "segregate_error
*Subroutine to download the error data from the it_error table.
FORM error_download.
IF it_error[] IS NOT INITIAL.
    CALL FUNCTION 'WS_DOWNLOAD'
      EXPORTING
        codepage = 'IBM'
        filename = v_error_filename
        filetype = 'DAT'
      TABLES
        data_tab = it_error.
ENDIF.
ENDFORM.                    "error_download
       Start new screen                                              *
FORM bdc_dynpro USING program dynpro.
CLEAR bdcdata.
bdcdata-program = program.
bdcdata-dynpro   = dynpro.
bdcdata-dynbegin = 'X'.
APPEND bdcdata.
ENDFORM.                    "BDC_DYNPRO
       Insert field                                                  *
FORM bdc_field USING fnam fval.
         IF FVAL <> NODATA.
CLEAR bdcdata.
bdcdata-fnam = fnam.
bdcdata-fval = fval.
APPEND bdcdata.
         ENDIF.
ENDFORM.                    "BDC_FIELD
*&      Form bdc_transaction
      text
     -->MESSTAB    text
     -->TCODE      text
     -->CTUMODE    text
     -->CUPDATE    text
FORM bdc_transaction TABLES messtab USING tcode ctumode cupdate .
CALL TRANSACTION tcode USING bdcdata
                        MODE   ctumode
                        UPDATE cupdate
                        MESSAGES INTO messtab.
REFRESH bdcdata.
CLEAR   bdcdata.
ENDFORM.                    " bdc_transaction
Uploading data file to internal table.                           *
FORM upload_data.
CALL FUNCTION 'WS_UPLOAD'
      EXPORTING
         filename                      = p_file
                    CODEPAGE                      = 'IBM '
         filetype                      = 'DAT'
      TABLES
          data_tab                      = it_price
      EXCEPTIONS
         conversion_error              = 1
         invalid_table_width           = 2
         invalid_type                  = 3
         no_batch                      = 4
         unknown_error                 = 5
         gui_refuse_filetransfer       = 6
         OTHERS                        = 7.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    "upload_data
*&      Form display_message
FORM display_message .
IF it_error[] IS INITIAL.
    MESSAGE i019(zmsg).   "Success
ELSE.
    MESSAGE e020(zmsg).   "Failed
ENDIF.
ENDFORM.                    " display_message
*&      Form get_filename
      text
--> p1        text
<-- p2        text
FORM get_filename .
CALL FUNCTION 'F4_FILENAME'
   EXPORTING
     program_name        = syst-cprog
     dynpro_number       = syst-dynnr
      FIELD_NAME          = p_file
   IMPORTING
     file_name           = p_file .
IF sy-subrc NE 0 .
    WRITE : / 'Enter File Name'.
ENDIF.
ENDFORM.                    " get_filename
*&      Form make_file_name
FORM make_file_name .
WRITE sy-datum TO date MM/DD/YYYY.
WRITE sy-uzeit TO time USING EDIT MASK ' __ __ __'.
CONCATENATE text-002 date time '.txt'
         INTO v_error_filename.
ENDFORM.                    " make_file_name
regards
prabhu

Error in psa level - Request not updated to any data target using delta

Hi,
This is pavan and am facing this issue any one know for below issue to solve.
Data Flow is BW Version and Implemented in BI 7.20 version.The issue was data has come
to psa level but from here it is not updated to infocube so for that i have tried update manually
it is showing information that 1334 SID IS SMALLER THAN / EQUAL TO 47287 CANCELLED.
In Process Chain DTP is not included so how can i update data to infocube with out disturbing process chain
Regards,
Pavan Kumar

Hi Pavan Kumar ,
Please log on Tcode RSRQ -then give old request number (I think in your case 1334 is old request number),
and you will get monitor for that request then change the QM status to red after that load new request .
Thanks
Hanumanthu

Can not insert/update data from table which is created from view

Hi all
I'm using Oracle database 11g
I've created table from view as the following command:
Create table table_new as select * from View_Old
I can insert/update data into table_new by command line.
But I can not Insert/update data of table_new by SI Oject Browser tool or Oracle SQL Developer tool .(read only)
Anybody tell me, what's happend? cause?
Thankyou
thiensu
Edited by: user8248216 on May 5, 2011 8:54 PM
Edited by: user8248216 on May 5, 2011 8:55 PM

I can insert/update data into table_new by command line.
But I can not Insert/update data of table_new by SI Oject Browser tool or Oracle SQL Developer tool .(read only)so what is wrong with the GUI tools & why posting to DATABASE forum when that works OK?

Can not update request in data target

Hi,
We have a process chain for master data (10 parallel) loads. One of the load
failed with error "can not update request REQU_46xxxxxxxxxxxxxx in data target".
When I checked the InfoPackage
(a) update: full load
(b) it has data selection
(c) processing :PSA and then to data targets
(d) Data targets: update in all data targets for which active rules exist.
But I do not see any list of data targets here.
Can some one please suggest me how do I correct this load failure.
Thanks

Hi Wondewossen, NS and Nagesh,
Thanks for the information. I am in support, and the developer is
not here now.
I have checked Header tab in the monitor, in this there
is a update symbol and infosource name and an -->
but after arrow there is nothing.
when I click on this I get a message
"No active update rules exist".
Can you please advice me how to I correct this.
Thanks

Data in server is not updated

i have modify the data STREET to "ANG MO KIO"
http://i192.photobucket.com/albums/z231/yzme/d1.gif
but the data in server still "HEAVEN ST"
http://i192.photobucket.com/albums/z231/yzme/d2.gif
I am using Time2Way T01, if it is when i sync the data will be uploaded, or do i need to configure somewhere to get the data upload ?
if the data in client and middleware is different, when i sync , the data from the middleware will again download to the client replace the modified values
OR
the data in the client will uploaded to the middleware and trigger the MODIFY bapi wrappers ?
<b>
when i check my MEREP_MON, and MEREP_LOG there is no data inside this meaning after i changed the values and perform the sync, Inbox and Outbox still remain the previous data as well as inside the MEREP_LOG,
is it the bapi wrapper not call by the client ?
</b>
and i find out that my bapi not get called, what additional code should i add instead of the code below.
DO I NEED TO IMPLEMENT SOME CODE FOR UPLOADER ??
do i have to change the reqDirectSync="true", if yes, how do i changed, just change inside the editor, or there is somewhere to configure in sapgui
after i changed the data , i try to sync, and i check on merep_mon
what specific or additional steps i need to configure, on uploader / receiver or synchronizer
<b>i do not implement any syncBoDelta or global reset ?</b>Can someone explain the term "delta" to me and its activities?
if i have upload something, and sync, the Inbox should have something right ??
i just put add this code to modify my records
public String modifyRecord(String eventName,boolean didNavigate){
                         String syncBoName="ZCON";
                         String syncKey="0001230297";
                         tableViewBean.setString(syncBoName +" "+syncKey);
                         System.out.println("SyncBoName: " +syncBoName + " syncKey: " +syncKey);
                         tcp = TableContentProvider.instance(syncBoName);
                         tcp.modifyTable(syncBoName,syncKey);                                   return JSP_DETAIL_SYNCBOINSTANCE;
public void modifyRecord(String syncBoName,String syncKey){
SyncBoDescriptor sbd=null;
sbd=descriptorFacade.getSyncBoDescriptor(syncBoName);
SyncBo sb=null;
try{
System.out.println("bp 2");
sb=dataFacade.getSyncBo(sbd,syncKey);
}catch(PersistenceException pex){
System.out.println("Exception in modifyRecordLoc:" +pex.getMessage());
SmartSyncTransactionManager transactionManager;
try{ transactionManager=dataFacade.getSmartSyncTransactionManager();
if(!transactionManager.isTransactionStarted()){
transactionManager.beginTransaction();
boolean b8=false;
b8=setHeaderFieldValue2(sb,"STREET","ANG MO KIO");
transactionManager.commit();
SetSendType();
listAllOutDelta();
checkInboxConflict();
}catch(Exception e){
System.out.println("Exception in modifyRecordAmt2:" +e.getMessage());
public void checkInboxConflict(){
          ErrorConflictInbox errorConflictInbox= SmartSyncRuntime.getInstance().getInboxNotifier().getErrorConflictInbox();
          MeIterator iter;
          SyncBoResponse resp;
          try {
          iter= errorConflictInbox.getAllSyncBoResponses();
          while(iter.hasNext()){
          resp= (SyncBoResponse)iter.next();
          String bo=resp.getSyncBoDescriptor().getSyncBoName();//SyncBo Name
          String state=resp.getSyncBoResponseState().toString();
          String res=resp.getResponseType().toString();//Get the SyncBo response type (conflict or ERROR)
          String msg=resp.getText();// This will return the exact message from the server
          System.out.println("bo:" +bo +" state: " +state +" res: " +res +" msg:" +msg);
          System.out.println("state:" +resp.getSyncBoResponseState().toString());
          if(resp.getSyncBoResponseState().equals(SyncBoResponseState.INITIAL)){
               String a=resp.getSyncBoResponseState().toString();
               resp.acceptClientSyncBo();
               String b=resp.getSyncBoResponseState().toString();
               resp.delete();
               System.out.println("state1: " +a +"state2: " +b);
          boolean syncStatusComplete= SmartSyncRuntime.getInstance().getInboxNotifier().isSyncStatusComplete();
          System.out.println("syncStatus:" +syncStatusComplete);
          }catch (Exception e) {
          e.printStackTrace();
public void listAllOutDelta(){
          SyncBoOutDeltaFacade deltFac=SmartSyncRuntime.getInstance().getSyncBoOutDeltaFacade();
          MeIterator allDelta;
          try {
               allDelta = deltFac.getAllDelta();
               while(allDelta.hasNext()){
                         SyncBoOutDelta outDelta=(SyncBoOutDelta)allDelta.next();
                         System.out.println("SyncKey:" +outDelta.getSyncKey() +" Action:" +outDelta.getAction()
                                   +" State:" +outDelta.getStateId() +" SendType:"+outDelta.getSendType());
          } catch (SmartSyncException e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
          } catch (PersistenceException e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
public void SetSendType(){
          SmartSyncRuntime ssRuntime = SmartSyncRuntime.getInstance();
          SyncBoOutDeltaFacade boDeltaFacade = ssRuntime.getSyncBoOutDeltaFacade();
          SyncBoDescriptorFacade descF = ssRuntime.getSyncBoDescriptorFacade();
          SyncBoDescriptor myBO = descF.getSyncBoDescriptor("ZCON");
          boDeltaFacade.setSendType(myBO, SyncBoOutDeltaSendType.SEND_DIRECT);
//SyncManager.getInstance().synchronizeWithBackend(VisibilityType.USER_SHARED);
     public boolean setHeaderFieldValue2(
          SyncBo sb,
          String headerFieldName,
          Object value) {
          SyncBoDescriptor sbd = sb.getSyncBoDescriptor();
          //RowDescriptor trd = sbd.getTopRowDescriptor();
          System.out.println("bp 10");
          RowDescriptor trd=sbd.getRowDescriptor("010");
          System.out.println("bp 11");
          FieldDescriptor fd = trd.getFieldDescriptor(headerFieldName);
          System.out.println("fd:" +fd.getFieldName());
          if (fd != null) {
          BasisFieldType bft = fd.getFieldType();
          //Row header = sb.getTopRow();
          System.out.println("bp 12");
          //Row header = null;
          Row[] header=null;
          //try {
               //header = sb.getRow("0001211181");
               //header=sb.getTopRow();
               header=getItemInstances(sb,"010");
               if(header==null){
                    System.out.println("is null");
               }else{
                    System.out.println("not null");
          //} catch (PersistenceException e1) {
               // TODO Auto-generated catch block
          //     System.out.println("Exception getRow:" +e1.getMessage());
          //     e1.printStackTrace();
          System.out.println("bp 13");
          try {
//             Integer operator
          if (bft == BasisFieldType.N) {
               System.out.println("Numeric");
          NumericField nf = header[0].getNumericField(fd);
          if (nf != null) {
          BigInteger ii = new BigInteger(value.toString());
          nf.setValue(ii);
          return true;
          } else {
          return false;
//             Character operator
          if (bft == BasisFieldType.C) {
               System.out.println("Character");
          CharacterField cf = header[0].getCharacterField(fd);
          if (cf != null) {
          cf.setValue(value.toString());
          return true;
          } else {
          return false;
//             Decimal operator
          if (bft == BasisFieldType.P) {
               System.out.println("Decimal");
          DecimalField df = header[0].getDecimalField(fd);
          System.out.println("bp 1.1");
          if (df != null) {
               System.out.println("bp 1.2");
          BigDecimal bd = new BigDecimal(value.toString());
          System.out.println("bp 1.3");
          df.setValue(bd);
          System.out.println("bp 1.4");
          return true;
          } else {
               System.out.println("bp 1.5");
          return false;
//             Similar operation for time and date operator fields
          if (bft == BasisFieldType.D) {
               System.out.println("Date");
          DateField df = header[0].getDateField(fd);
          if (df != null) {
          if (value.toString().equals("0")) {
          Date dat = Date.valueOf("0000-00-00");
          df.setValue(dat);
          } else if (!value.toString().equals("")) {
          Date dat = Date.valueOf(value.toString());
          df.setValue(dat);
          } else {
          Calendar cal = Calendar.getInstance();
          java.sql.Date bd =
          new java.sql.Date(cal.getTime().getTime());
          df.setValue(bd);
          return true;
          } else {
          return false;
//             Similar operation for time and date operator fields
          } catch (SmartSyncException ex) {
          System.out.println(ex.getMessage());
          } catch (PersistenceException e) {
          System.out.println(e.getMessage());
          return false;
SyncType: T01 Wrapper: GetList,GetDetail,Modify
<?xml version="1.0" encoding="utf-8" ?>
- <MeRepApplication schemaVersion="1.1" id="ZCON" version="01">
<Property name="CLIENT.BUILDNUMBER" />
<Property name="C_APPLRESOLVE" />
<Property name="DATA_VISIBLE_SHARED">X</Property>
<Property name="E_APPLRESOLVE" />
<Property name="FACADE_C_CLIENT">X</Property>
<Property name="FACADE_E_CLIENT">X</Property>
<Property name="HOMEPAGE.INVISIBLE" />
<Property name="INITVALUE" />
<Property name="RUNTIME">JSP</Property>
<Property name="TYPE">APPLICATION</Property>
- <SyncBO id="ZCON" version="1" type="timedTwoWay" allowCreate="false" allowModify="true" allowDelete="false" reqDirectSync="false" downloadOrder="1">
- <TopStructure name="TOP">
- <Field name="SYNC_KEY" type="N" length="10" decimalLength="0" signed="false" isKey="true" isIndex="true">
<Input type="create">false</Input>
<Input type="modify">false</Input>
</Field>
- <Field name="PERSNUMBER" type="N" length="10" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <ChildStructure name="010">
- <Field name="SYNC_KEY" type="N" length="10" decimalLength="0" signed="false" isKey="true" isIndex="true">
<Input type="create">false</Input>
<Input type="modify">false</Input>
</Field>
- <Field name="PERSNUMBER" type="N" length="10" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="CITY1" type="C" length="40" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="CITY2" type="C" length="40" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="STREET" type="C" length="40" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="HOUSE_NUM" type="C" length="40" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
- <Field name="REGION" type="C" length="40" decimalLength="0" signed="false" isKey="false" isIndex="false">
<Input type="create">false</Input>
</Field>
</ChildStructure>
</TopStructure>
</SyncBO>
</MeRepApplication>
Message was edited by:
        yzme yzme

<u>my intention is very simple, i just need to update a field in a row and update to the middleware so that the backend will reflect the changes. </u>
>2 if i set the conflict/error handling to application, then i should have to implement some code for it, right ?
>3) List syncbooutdelta
<b>SyncKey:0001233035 Action:M SendType:SEND</b>
doesnt it mean that when i sync , the uploader will pick up this data and do a modification ??
i have change the metadata like this
<SyncBO id="ZCON" version="1" type="timedTwoWay" allowCreate="false" allowModify="true" allowDelete="false" reqDirectSync=<b>"true" </b>downloadOrder="1">
1) i try to sync the application and check the worklist monitor, there is nothing in the inbox ? how come ?
2)if i test using emulator, i try to modify a value and execute, i am getting the following error.
<u>
Header action from mobile="MOD", R/3 action="ADD"
Return code 1 (DOWNLOADER)
</u>
i try to modify not "Add"
3) I am using Time 2 Way , how to check it is synchronous or asynchronous ? in merep_sbuilder, the default asyn. is checked, meaning async ??
the type is T01 , ASYNC
4)
public void checkInboxConflict(){
          ErrorConflictInbox errorConflictInbox= SmartSyncRuntime.getInstance().getInboxNotifier().getErrorConflictInbox();
          MeIterator iter;
          SyncBoResponse resp;
          try {
          iter= errorConflictInbox.getAllSyncBoResponses();
          while(iter.hasNext()){
          resp= (SyncBoResponse)iter.next();
          String bo=resp.getSyncBoDescriptor().getSyncBoName();//SyncBo Name
          String state=resp.getSyncBoResponseState().toString();
          String res=resp.getResponseType().toString();//Get the SyncBo response type (conflict or ERROR)
          String msg=resp.getText();// This will return the exact message from the server
          System.out.println("bo:" +bo +" state: " +state +" res: " +res +" msg:" +mtext);
          boolean syncStatusComplete= SmartSyncRuntime.getInstance().getInboxNotifier().isSyncStatusComplete();
          System.out.println("syncStatus:" +syncStatusComplete);
          }catch (Exception e) {
          e.printStackTrace();
<u>bo:ZCON state: INITIAL res: CONFLICT msg:Conflict: R/3 = delete, device = modify
SyncStatus=true (complete)
</u>
5) after that i change my code to this
while(iter.hasNext()){
if(resp.getSyncBoResponseState().equals(SyncBoResponseState.INITIAL)){
    String a=resp.getSyncBoResponseState().toString();
    String a1=syncBO.getSyncState().toString();
    resp.acceptClientSyncBo();   //No transaction stated to commit
    resp.delete();
String b=resp.getSyncBoResponseState().toString();
String b2=syncBO.getSyncState().toString();
System.out.println("state1: " +a +"state2: " +b);
System.out.println("SyncState1: " +a1 +"SyncState2: " +b1);
<u>state1: INITIAL state2: RESOLVED </u>
<u>SyncStatus1:QUANRANTINE SyncStatus2: INCONSISTENT</u>
and i try to sync ...no data in worklist
6)i try to list out all the delta to be uploaded
ListAllOutDelta to be upload
<u>SyncKey:0001233349 Action:I State:99925F8E24DFFE49A4563C5E018E9B61 SendType:SEND
</u>
i am modifying the rows, not Insert a new row, the Action:'I' instead of 'M', pls clarify on this.
after i sync, i found out that there is 2 record with different syncKey but same primary key and all attributes appear to be same except the attribute that i changing.
<u>SYNCKEY    PERSNUMBER CITY STREET HOUSENO</u>
0001230298 000000000 HELL <u>ANG MO KIO</u> 0123456789 (modified record)
0001230299 000000000 HELL <u>HEAVEN ST</u> 0123456789(old record)
i check the application and found out that the previous record that i modify have its value changing locally but not updated into the backend, after sync, there is another record downloaded into this application which is the old record before i modify with different syncKey.
but when i check the backend table, there is only 1 record inside, because i dont implement the 'Create' Bapi.
does it make sense ?
7) when i check my client , the data is persisted with modified value , but the changes is not reflected in the server, how come the data in client is not uploaded to the server.
acceptClientSyncBo will make the client wins how come the data is not get updated in server ?
Re: Regarding modifying Sync BO
According to him, can anyone translate the things highlighted below
for modifying one sync bo instance , there is no need to use createUnlinkedCopy()..
just use like this..
sb = dataFacade.getSyncBo(sbd,key);
SmartSyncTransactionManager transactionManager;
transactionManager = dataFacade.getSmartSyncTransactionManager();
transactionManager.beginTransaction();
setHeaderFieldValue(sb,"PERSNUMBER","9866321467");
setHeaderFieldValue(sb,"FIRSTNAME","RajaSekhar");
setHeaderFieldValue(sb,"LASTNAME","Varigonda");
setHeaderFieldValue(sb,"PROFESSION","Technical Specialist");
setHeaderFieldValue(sb,"***","MALE");
setHeaderFieldValue(sb,"BIRTHDAY","1977-09-28");
setHeaderFieldValue(sb,"HEIGHT","165");
setHeaderFieldValue(sb,"WEIGHT","75");
// Commit the transaction
transactionManager.commit();
setHeaderFieldValue - can be used to set value in new sync bo instance , or modify the instance.
<b>
But one main think here have to consider is , if you have created one Sync Bo instance , not synchronized with back end and u have modified that, then thats just like a creation .So during sync this will call Create Bapi Wrapper.
</b>
But after synchronization , is u are modifying that instance , then it is a modification(will call MODIFY Wrapper in back end during synchronization). u must have the right to modify this instance in the client side.
hope u got it.
u can debug MI Applications in NWDS.
refer this blog written by Arun
/people/arunkumar.ravi/blog/2006/02/22/execute-debug-your-mi-code-from-nwds
let me know , if u have doubts
Regards
Kishor Gopinathan
pls comment...

Data not updating from psa into Data Targets

Hiii,
We have started data upload in info cubes from psa . The number of records was 4 in psa . But after waiting for at least 3 hours ,still the data is not updated in info cube . The data which we want to upload in info cube (of stock) is of past date which due to some reason failed to update in BI from ECC . To upload the same that is data of past date we have deleted the setup table in ECC and then after filling the data again in set up tables, created a new info package from which uploaded data in PSA . But while trying to upload data in info cubes,it is not getting updated and the request status is showing still green yellow in psa.
Please suggest how to resolve this issue.
Thanks and regards

Are you loading material movements from 2LIS_03_BF in to cube? If so, please look at the below link for inventory data loads.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/906b837a-0d54-2c10-08b8-bde70337547e?QuickLink=index&overridelayout=true
Regards,
JB

Not updating data in Tcode "RBT_ENH_GEN"

Similar Messages

Maybe you are looking for