Not updating GR reversal

Dear Experts,
I have made a PO against sales order. Goods movement and Confirmations have been done (partial).
When I go to Documented goods movement, the total GR value is showing 16 Tonnes which is actual (after considering the 101 and 102 movements), but in the production order general data tab, the delivered quantity is 21 tonnes.
The GR is reversed against the production order.
Why the goods movement quantities are not updating in the production order?
There is no record in COGI and CO1P also.
Pls guide me what could be the mistake and how to address this issue.
Regards,
Rohit Chauhan.
Edited by: Rohit Chauhan on Feb 9, 2009 6:50 AM

Hi,
The GR is done Manually using T Code MB31. The reversals are done through MB31 only. In OPKA, 102 movement is included.
All the corresponding documents are in the system for goods movement. But still the quantity is not getting updated in production order.
I ran the same scenario in sandbox, the quantity is getting updated in PO. Even when I am not cancelling the confirmation and doing the GR reversal using MB31.
What can be the problem? What else should I check.
Regards,
Rohit.

Similar Messages

  • Not able to post J1I5 (Excise Updation for reversal document)

    Hi,
    We have reversed the material document with "MBST".
    SAP does not update the reversal excise entries  for the document posted through MBST.
    SO WE ARE TRYING TO UPDATE EXCISE (PART1) THROUGH J1I5.
    Input given are Posting date, Excise Group, company code,Plant, Material document and classification as "IPD"
    We are getting the material document list after executing the J1I5 but not able to simulate and Post the same
    Error "Processing over ZERO Records.
    Thanks
    Prakash

    hI,
    Go to J1IS click cancel excise invoice (Shift+F6) , give the internal document number of your excise invoice created and year then click the cancel excise invoice , it will cancel the excise invoice .If u go to J1IS and cancel the document only the excise invoice created will be cancelled, no accounting entries will be generated. In order to capture accounting entries you have to fetch the accounting document of J1IS through table j_1iexcdtl and j_1ipart2, pass a reversal entry for the accounting document through FB08. And if you want to post again with the same material documents create the excise invoice in J1IS with respective same material document

  • Why do you not offer a reversion feature when you crash my add on with updates?

    I at my advanced age rely on the norton toolbar for storing and remembering my multitude of logins. It seems as if every time you update firefox, I lose this feature and have to search the internet for an hour to find and download the prior version of firefox to get it back, and often it auto updates again within hours and wipes out that effort. Why can you not offer a reversion feature when you update? I have voiced this complaint repeatedly over several years. I am happy with firefox with that one exception. It is VERY annoying and time consuming.

    You could set your Firefox to notify you of updates, and give Norton a few days to update before actually updating Firefox. To set that, use this dialog:
    orange Firefox button ''or'' classic Tools menu > Options > Advanced > Update
    The "Check for Updates" option might fit the bill. Definitely easier than rolling back an update.

  • Customize Movement Type : Reverse is not update the Serial No Status

    Hi All,
    Customize Movement Type : Reverse is not update the Serial No Status from ECUS to ESTO when reverse Delivery Order movement document.
    Mind to guide where to check this configuration problems.
    Thank you.

    Hi All,
    For the Customization Movement Type, Initial plan is copy from 602 but found out below different on Trans./ev serial no. Not sure the problems is from this site > How to change the configuration.

  • Excise Invoice (J1IIN) Cancelltion did not update RG23A Part-II

    Hi, Dear's
    I have cancelled Excise Invoice (T.Code J1IIN), system shows reversal accounting entry generated thru J1IH
    BUT did not update RG23A Part-II register
    Thanks
    SR

    Hi,
    1)Have U created Master Data in J1ID,If U are allready Created Master Data pls Check Mtrl Type(It should not Non Cenvatable)
    2)If you are following TAXINN,Then u should maintain Tax code to Company code.
    If u are Using TAXINJ,U should maintain Excise Defaults.
    3)In Excise Group,U should Activate MIGO transactions.
    4)Check ur TAX code,Tax code is Deductable or non dedctable.
    Raghu

  • Excise Invoice Cancellation did not update RG23A Part-II Register ?

    Hi, Dear's
    I have cancelled Excise Invoice (T.Code J1IIN), system shows reversal accounting entry generated thru J1IH
    BUT did not update RG23A Part-II register
    Thanks
    SR

    HI
    As far as i know there is no part 1 or part 2 for RG1 register.
    regards
    Prashanth

  • PGI status at delivery header level has not updated

    Dear Friends,
    We had created deliver, picking was completed and PGI was completed successfully. However when we try to create Billing, an error occurs stating that PGI is not completed.
    Further when we check the delivery, the Goods Issue status at item level is completed but at the Header level the GM is B which is partially completed. In the Document flow we can see the PGI Status is completed.
    I think there might be some table which was not update. Is there any way to update the status in the delivery?
    Further we tried to reverse the PGI through VL09, but system is not able to find the delivery ..this might be because the system might be checking in some table where the statues has not updated.
    Please suggest me how should I complete this.

    HI,
           Go to transaction "SE16N" and enter table "VBUK" and give the delivery number in the field sales document number. Now you type "&SAP_EDIT" in the transaction bar and execute. Here you can change the status(Total goods movement). And see If you can actually bill the document. Kindly please let me know If you need any more information on this.
    Regards,
    Ram Pedarla

  • Business area readjustment run not updating

    Dear Experts,
    We have run business area readjustment on 27.11.2009 with the T.Code : F.5D, F.5E, the update run identification no. is 1018 (key date 26.11.2009). After this we had run on 28.11.2009 with the key data of 27.11.2009 ;it is not updating any transactions and also in F.5F it not showing any run identification number. In SM35, session not generated with SAPF180.  then we have reversed the last run (run identification number 1018). Again after reversing we have run on 02.12.2009 with the key data of 27.11.2009 ;it is not updating any transactions and also in F.5F it not showing any run identification number.
    F.5D calculation
    2. F.5E post balance sheet adjustment run date 27.11.2009 (Key date 26.11.2009)
    3. F.5F display balance sheet adjustment logs (found run identification number1018)
    4. Again F.5D calculation
    5. F.5E post balance sheet adjustment, run date 02.12.2009 (Key date 27.11.2009)
    6. F.5F display balance sheet adjustment logs (No logs found)
    7. Reversal of run identification number 1018 with t.code F.5G.
    8. again reprocessing step 4 and 5.
    9. No logs found in F.5F.
    Please advice on this at the earliest
    Thanks & Regards
    Chandu
    Edited by: chandu on Dec 2, 2009 12:20 PM

    Dear All,
    I got solution,   i have run foreground test run  system shown the error message
    Error because of changes in configuration for G/L a/c run the program SAPF180K,
    I have run this program SAPF180K shown the exact which G/L a/c , 
    Regards
    Chandu

  • AP_INVOICE_DISTRIBUTIONS_ALL.LAST_UPDATE_DATE was not updated

    Hi,
    I would like to raise one question on AP_INVOICE_DISTRIBUTIONS_ALL.LAST_UPDATE_DATE of EBS 11.5.10 which is related to OBI Application 7.9.6.1
    One customer mentioned that AP_INVOICE_DISTRIBUTIONS_ALL.LAST_UPDATE_DATE was not updated whenever AP_INVOICE_DISTRIBUTIONS_ALL.PREPAY_AMOUNT_REMAINING filed is updated.
    In reverse, I asked customer if it is expected in EBS 11.5.10 because I understand that LAST_UPDATE_DATE field is mandatory updated whenever any column is changed.
    "1/ Basically, AP_INVOICE_DISTRIBUTIONS_ALL.LAST_UPDATE_DATE field is mandatory updated whenever any column is changed. If not, it must be a Source Application problem. Why do your Source Application person think that it is expected?
    Ans: Because Source Application person think that Oracle apps basic application functionality for AP Invoice."
    Could you let me know if it is really expected in EBS 11.5.10 or any other suggestions?
    Regards,
    ChongHak

    If the last_update_date is not updated when another column in the table is updated, it is most likely a bug in EBS.
    You should search metalink for a patch or raise an SR to obtain one.
    Hope this helps,
    Sandeep Gandhi

  • Workflow issue - Main workflow container elements are not updated.

    Hi All
    We have implemented N-step badi for approval process and for this we have activated one workflow which contains subworkflow .
    During approval process , only the subworkflow container elements( approver list and last approver) getting updated with status and time.But main workflow container elements is not updating with these details.
    Binding between main workflow and subworkflow is perfect. But reverse binding ( from subworkflow -> main workflow ) will take place once subworkflow is completely finished. But here we will require / need to pass some information from sub workkflow to main workflow when still subworlflow in process( before completed itself).
    Please let me know is there any process / steps is required to pass values between subworkflow to main workflow ( binding is perfect).
    Please let me the way how I can update the main workflow container from  subworkflow container or from any step in sub workflow .
    In subworkflow . we have loop of  approvers and it will send workitems to approvers one by one.
    Here i need to update Main workflow with the information like last approver and approver list with status and approved time.
    So please suggest how Can I update main workflow container from subworkflow while subworkflow is still in process( subworkflow not yet completed).
    Kindly reply me ASAP.
    Thanks and Regards
    Madhukar .

    Yes I am setting SWC_SET_ELEMENT for my container values,the ones for which i have defined as EXPORT.
    And I have checked the task also...
    Everything has been checked properly..The binding is fine.
    Thanks & regards,
    Ravikiran Kallimath

  • Hard currency is not updated

    Hi,
    Issue with few accounting documents were not updated with hard currency due to hard currency is not mapped at the time of posting and exchange rates is not updated accordingly.
    Could you please let us know do we have any alternative option to post the hard currency which was not updated accounting documents with out reversal.
    Regards
    sangeetha

    Hi,
    Use t code F-05 . Enter the amount only in hard currency , in local currency & Group currency enter zero amount.
    PK
    Doc.Curr
    Loc.curr
    Hard.Curr
    70
    0.01
    0.01
    59.01
    75
    0.01
    0.01
    0.01

  • Tax field is not updated in COPA documents

    Hi
    There is a Value field for Tax is not updated in COPA documents due to missing configuration in KE4I. Now the tax field is updatating properly after completed the configuration in KE4I.
    But we have couple of COPA documents which are generated (source ) through SD billing. And we have entered proper condition type in Sales order. It is calculating the Tax amount based on condition type in sales order.
    Now we want to update the Tax value filed information into COPA documents .  Please let me know the procedure to update the Tax value field in COPA documents.
    Thanks
    Richa

    Hi,
    reverse/repost the docs again to CO-PA using KE4S.
    best regards, Christian

  • Field BKPF-STBLG not updated

    While canceling the commercial as well as excise invoice the field BKPF-STBLG not updated.

    Hi,
    Thanks for your reply.
    I did the changes to the standard sort key 018-Asset Number as per your advise and didnt get the desired outcome.
    Our asset code length is 7 and sub asset length is 1
    So i went to OB16 and added STBLG to the sort key 018, then system says that you can maintain only upto 18 characters.
    So i have made asset number to length to 7 and sub number lengtth to 1 and STBLG length to 10.
    After saving the sort key, i have assigned the same sort key to the all of my asset related GL accounts in company code data under control data tab.
    Now i reversed one asset transfer transaction and checked the BKPF entry. It didnt updated either in sending company code document nor receiving company code's document.
    Please advise me, if i am missing anything.
    But really thankful to you for your intiation.
    Thanks,
    Srinu...

  • COPA Docs, values not updated

    Hi,
    I have few Sales orders where billing is completed and COPA document vales still zero.
    I found that The condition type VPRS having zero value, because the material's accounting tab is not extended.
    Now i have values in accounting tab.
    Kindly guide how to update(T-code) values in COAP document from these Sales orders.
    TIA
    Regards
    Rashid

    Hi
    I would suggest to use KE21N
    If you try to reverse now, I am not sure if reversal doc will have any COGS... Try to reverse one billing doc... if it does not update COGS upon reversal, then reverse the billing doc and repost...
    Else, you have to use KE21N
    Regards
    Ajay M

  • Essbase Audit Files not Updating

    Hi All,
    My Essbase Audit files are not updating....both .ALG and .ATX files.
    They used to update up to the last month but those are not updating.
    I checked the .cfg file and is okay with SAUDITR.
    Please suggest.

    Some of the terminology Dreamweaver uses can make what you're saying a bit confusing, so I'm going to try to clarify so we can better understand the situation.
    You and your coworker are each on your work computers using Dreamweaver. You have both created site definitions in Dreamweaver, pointing to a folder on your company's internal server.
    The "Local Site Folder" setting of your site definition should be pointing to a location on your own computer. The same setting on your coworker's site definition in Dreamweaver should be pointing to a location on their computer.
    This means that when you select "Local view" in the Files panel, it will only show files on your computer. Likewise, when your coworker does the same, it will only show files on their computer.
    It is the "Server Folder" setting in the server settings on each of your computers that should be pointing to that folder on your company's internal server.
    This means that when you select "Remote Server" (or "Testing Server" if you checked that box instead for the server in your site definition) in the Files panel, you will be viewing the files on your company's server.
    In order to essentially share files between your copy of Dreamweaver and your coworker's, you need to "upload" (i.e. copy) files from your Local View to your Remote Server. Your coworker would then see these files by looking at Remote Server on their computer. And the reverse is true; they upload from Local View to Remote Server, and you would see the files by looking at the Remote Server view on your computer.
    Hope this helps.

Maybe you are looking for

  • How do I switch my ipod to a new computer without losing all of my songs?

    My computer just crashed and I bought a new one downloaded iTunes then plugged in my iPod to sync all of my content to my new comp. and it won't let me do it without erasing all of my content which I neglected to back up. How do I get my iPod's conte

  • Any way to restore from a back up; old software to new?

    I lost my iPhone 4 a few months ago and got a 3gs off my manager. The problem is he had already updated to software version 5 and when I had my iPhone 4 backed up it was using 4.3.3. So i cannot restore from back-up as they are not compatable. I have

  • My accelerometer(gravity sensor) doesn't work

    my ipod touch 4 accelerometer(gravity sensor) doesn't work, it has no response when i play games, watch video or photos,browsing web.....i update and restore many times...but still doesn't work... also,once i lock the ipod,it can't be unlock and rema

  • Ipod shuffle switch off at the end of a playlist?

    Hi, I would like my ipod shuffle to automatically switch off at the end of a playlist (or after a certain time). Does anyone know if there is a solution to this? A firmware update or hack that solves this? Regards, - mg00se

  • Difference in Fiscal year start value under Asset history sheet

    Dear Experts, When I run the report S_ALR_87011990 for April and May the report should show the same FY start values. But you will notice that three classes of assets are showing different values. Z310, Z500 and Z510. What could be the reason for thi