Not uploading entire video

I have used my friends video recorder to upload a video to imovie and it worked fine. Now, on the same tape, it will only upload 1:51 of a different section of it and i can't make it upload the rest. I have seen quite a few similar questions regarding this... It worked fine and all of a sudden won't do it... Is it a bug? Is it me?
Any help please.

deadbeatpanda wrote:
So if the project is corrupt, does that mean I just have to re export my project in FCP? I used quicktime conversion and I read that it isn't recommended for exporting to be burned to DVD. I orginally tried to use compressor to get it to mpeg2 for DVD studio and what not so I compressed it again and the same thing happened. I also tried to use the share option in FCP with the DVD option but it exported for over 10 hours and was stuck at 5 minutes remaining for about the last 3 hours so I just cancelled it. This is the first time I have ever had to burn to DVD so sorry for being such a noob. And I have no menu, the DVD just needs to play automatically.
No, the clips do not automatically need to be re-exported. The issue with QuickTime is primarily a quality issue.
As Michael mentions above, the preferred workflow is "File:  Export:  Quicktime movie (NOT quicktime conversion) with current settings.  Take this file into compressor and apply the appropriate dvd preset."
I like to think of the export as a "master" file that I use as a basis for transcoding.
I have little knowledge of the newer output options like Sharing. My experience has been that the things done to "simplify" the work usually compromise quality and frequently don't work well.
Here's an article on making an autp-play DVD:
DVD Studio Pro: Authoring a DVD that plays automatically without a menu

Similar Messages

  • Unable to upload entire video clip to Youtube from Premiere Elements 10, "Share" feature

    Hi all,
    I just bought Premiere Elements 10 and plan to upload video to Youtube directly from Premiere Elements 10 "Share" feature. However it always uploaded about 10 to 20 seconds of my 2 minutes video only. Then it only uploded about 20 seconds video to Youtobe successfully but not the entire video clip which is about 2 minutes.  Is there anyone face the same problem like me? Please help me on this matter. Thanks in advance.
    Best regards,
    Ellie

    John,
    The WAB (Work Area Bar) has tripped up many, and is a common issue, when the Timeline output is truncated.
    Here is a look at the WAB (from PrE 4.0, but works the same in later versions):
    The WAB is a great tool, when one wishes to limit the Export, or perhaps the area of the Timeline that Renders. However, many do not even notice it, and fewer understand how it works, or how to use it, and it gets in their way, if something is not set properly.
    To the OP - Good luck,
    Hunt

  • I cloud drive not uploading my videos?

    I cloud drive not uploading my videos? It says its on there but I can't see them when I log on through iCloud.com Is there an upload bar or something I'm able to see the status for?

    My best guess is you did not complete the iCloud installation on all your devices. Please carefully look over the iCloud Setup Instructions.

  • Why can I not upload any video's?

    So I just bought your Adobe Photoshop and premiere elements.
    I own a Panasonic Lumix camera that takes pictures and video
    I can upload the cideos from this camera to windows movie maker, but when I try to upload it to premiere all I get is an audio file
    Why can I not use the video with this program

    save
    Nothing to be confused about. We put the details together and find the solution. Specifically....
    1. What version of Photoshop Elements and Premiere Elements do you have and on what computer operating system are they running? For now I will assume versions 12 on Windows 7 or 8 64 bit. But those are important details to start with.
    2. You say that your video is from a Panasonic Lumix camera...which model and what are your camera settings?
    We should be about to know what your source media are from that although a properties readout from programs such as MediaInfo or gspot would be useful.
    http://mediaarea.net/en/MediaInfo
    http://www.headbands.com/gspot/
    But to expedite matters, let us see what we can do from just knowing the brand/model/camera settings. Please include the file extension of this problem file?
    3. Once we have the information above, then we need to make sure that the project preset that you are using for Premiere Elements matches the properties of those source media. But, all we need to know, may be in your full answer to "2".
    Let us start here. We can go at whatever pace you want for getting to the core of this issue.
    The Adobe Premiere Elements Forum is described as Premiere Elements users helping other Premiere Elements users with Premiere Elements workflow problems. Occasionally an ID identified as Adobe Help or Staff will pop up but not routinely or expected. If you want direct Adobe Help immediately and scheduled, then contact Adobe Chat.
    http://helpx.adobe.com/contact.html?product=premiere-elements&topic=using-my-product-or-se rvice
    When the link opens, click on "I still need help" to bring up the Adobe Chat pop up.
    Looking forward to your follow up with details requested.
    Thanks.
    ATR

  • Icloud not uploading all videos

    I had uploaded four videos to an icloud stream that I shared with my other devices, and then I deleted them from my original photo album. But the videos I uploaded were actually just two videos that were too long to post so I had to cut them in half. The first original video was 14 minutes long and the second one was 7 minutes long. I'm not sure, it might've even been five videos. Now in my stream it's only showing two videos that are both 5 minutes long. Is there anything I can do to get the other two or three back? Oh and, they weren't all 5 minutes when I uploaded them. Thanks. 

    Check that our, according to article videos can only be up to 5 min long. Suspect that longer videos never uploaded.
    https://support.apple.com/kb/PH12070

  • Unable to upload entire video to Youtube

    Hey Guys,
    So, I created a simple 8 minute slideshow using Photoshop and then exported it into Premiere. I uploaded the video from Premiere directly onto Youtube but only 1:04 of the video is uploading to Youtube. Any advice?
    Thx.

    John,
    The WAB (Work Area Bar) has tripped up many, and is a common issue, when the Timeline output is truncated.
    Here is a look at the WAB (from PrE 4.0, but works the same in later versions):
    The WAB is a great tool, when one wishes to limit the Export, or perhaps the area of the Timeline that Renders. However, many do not even notice it, and fewer understand how it works, or how to use it, and it gets in their way, if something is not set properly.
    To the OP - Good luck,
    Hunt

  • IMovie will not upload my video

    I click import and I select the movie but it will not upload. It lets my select it and press import, but nothing happens. I also tried dragging the video into the event, but it doesn't do anything. The sign shows up, but it doesn't do anything.

    Me too - iMovie video, uploaded over 6 months ago to My Gallery, accessed via Safari 4.0 on my MacBook Pro running Snow Leopard, is displayed on the screen with the Apple equivalent of the Microsoft spinning hour-glass (you know, the clockwise tick thing) with a question mark sat in the middle of it all. And the video completely refuses to play. It used to play last year... Oddly, the video next to it plays fine.
    I know it's an Apple (Snow) Leopard Safari problem because the video plays fine when I use Firefox on the same MacBook Pro. And it plays fine with Safari on my Windows laptop from work. I have even tried uninstalling Apple Safari (drag and drop to the Trash) and then reinstalling. I've got to the point where I'm thinking of dropping Safari altogether, even if it does have nice MobileMe sync settings...
    Come on Apple, what's the craic here?
    Message was edited by: MivecGPX

  • Hi, i've made a video in final cut pro, the problem is that when i export it not the entire video is played, just the first 3 seconds

    i made a video in final cut pro x. The entire thing isn't that long, however when it comes to sharing it only the very first few seconds are playe.
    Thanks,
    Jamie

    see where the clip ends and then the timeline becomes black? when i add on an extra clip that line thing with the arrow does not move and if i try to export the video not all of it is played, just till that arrow.

  • Premiere Elements 4 does not add entire video clip

    Hi,
    I have Premiere Elements 4 and have been using it for years. I just captured a 15 minute movie and it will only play the first 66 seconds of the video. It shows the entire 15 minutes in the timeline, shows the file being 0.99GB, but simply goes black after 66 seconds. How do I rectify this? I have changed the "Still Image Duration" to 100000 frames just to try that and it did not work.
    Any help would be greatly appreciated.

    AlbinoSmurf
    Thanks for the reply with additional details.
    Your Premiere Elements 4 is a 32 bit application running in the 32 bit compatibility mode of the 64 bit system, with all the computer resource limitations of 32 bit system, example
    maximum installed RAM = 4 GB of which 3.2 to 3.0 GB or less of that are available. So, that is why I ask about computer operating system resources. But, you say that this is a "it worked before but not now" issue.
    You have a MPEG2 file, about 1 GB and 15 minutes duration, and you are getting only 66 seconds and black video after that from it on the Premiere Elements 4 Timeline.
    Please look at the computer resources and possible computer optimization.
    Also, video card/graphics card driver version updating
    Antivirus inteference
    Can you import and work with a MPEG2 file successfully when the file size is far less than 1 GB?
    Please review the above and then let us determine if any of it targets your situation.
    Thank you.
    ATR

  • Adobe Media Encoder - not encoding entire video

    Hi,
    I'm runining CS4 Design Premium on a Windows XP machine. I'm trying to convert an .avi to .flv, but Adobe Media Encoder is only converting the first few minutes of the video. Is there a file size limit for the source media? My .avi is pretty huge, almost 2 GB. Could that be the problem?
    Thanks!

    I'd ask you to post in the Adobe Media Encoder forum, but I cannot find one :-( Perhaps the After Effects forum or Premiere forum will know an answer or where to look. People here are not likely to have an answer.

  • IPad does not buffer entire video

    Ipad will buffer half of a video.   Playback is fine but stops at the point the buffering stops.

    Such a simple thing but not intuitive - thanks. It was driving me crazy!

  • DVD studio pro not playing entire video

    When I use the simulator it only plays a portion of the video, and when I burn it to a DVD it stops at the same point. But both the audio and mpeg2 in the track play all the way through though. What am I doing wrong?

    deadbeatpanda wrote:
    So if the project is corrupt, does that mean I just have to re export my project in FCP? I used quicktime conversion and I read that it isn't recommended for exporting to be burned to DVD. I orginally tried to use compressor to get it to mpeg2 for DVD studio and what not so I compressed it again and the same thing happened. I also tried to use the share option in FCP with the DVD option but it exported for over 10 hours and was stuck at 5 minutes remaining for about the last 3 hours so I just cancelled it. This is the first time I have ever had to burn to DVD so sorry for being such a noob. And I have no menu, the DVD just needs to play automatically.
    No, the clips do not automatically need to be re-exported. The issue with QuickTime is primarily a quality issue.
    As Michael mentions above, the preferred workflow is "File:  Export:  Quicktime movie (NOT quicktime conversion) with current settings.  Take this file into compressor and apply the appropriate dvd preset."
    I like to think of the export as a "master" file that I use as a basis for transcoding.
    I have little knowledge of the newer output options like Sharing. My experience has been that the things done to "simplify" the work usually compromise quality and frequently don't work well.
    Here's an article on making an autp-play DVD:
    DVD Studio Pro: Authoring a DVD that plays automatically without a menu

  • Screen capture not capturing entire video.

    I was recording my screen for lengths of about half an hour each and did this four times but all the recording and no longer than ten minutes and i have no idea why, what could have casued this? and is there anyway to recover the rest of the footage?
    Any help would be much appriciated.

    I have the same problem with other TV capture cards. I've
    tried a hauppauge 150, 350, and an AverMedia card.
    All show up as valid camera devices, but there is no video. I
    even tried to use an external applciation to set channels, set
    inputs, etc. No luck.
    My application works with some camera sources, such as usb
    web cams and a usb composite video capture device.
    I've searched lots of different forums and come across this
    problem at least a half a dozen times - never answered though.
    Help!!

  • My videos will not upload to my macbook pr

    I have a Sony handy cam. It will upload my pictures but it will not upload my videos from the same camcorder.I connect it with a USB cable. DOes anyone know why this is happening?

    Check the CD that came with the camera or Sony's device support area for some drivers/software that may better interact with the camera. Outside of loading up Image Capture (native OS X applciation), I would try Sony's own software.

  • IMovie WILL NOT upload to iCloud Drive

    For some reason my iMovie App on my Macbook will not upload the videos to the cloud. I make a lot of videos for myself, my friends and for youtube, and i really need them to backup and they won't show up in iCloud Drive. I have checked the iCloud Drive settings and iMovie is checked and I have tried uploading it through the iMovie folder in iCloud website in the iDrive files and it won't work because it says the files must be in a format iMovie can open. I have also tried doing it through the iDrive folders on my Macbook and it still won't work. What is going on? Is my macbook broken, or something?

    Looks like this has been solved by yesterdays IOS8 update - thanks!

Maybe you are looking for

  • Not able to display title of link.

    I am creating download excel link. but it is not working with the below code. i kept the following code in report attributes output csv as yes and link lable(paste below code} a href="f?p=&APP_ID.:0:&SESSION.:DOWNLOAD_EXCEL:NO::T_REGION_ID,T_EXCEL_NA

  • Purchased items were not received

    I have purchased items that were not received.  I also was unable to update or even use several of my Apps.  I read that I should delete these Apps and then reinstall them.  I did this and was able to use the Apps again HOWEVER the additional enhance

  • My iPod touch is not responding and doesnt give any options says it's disabled for 22,134,252 minutes and not moving

    my iPod touch is not responding and doesnt give any options says it's disabled for 22,134,252 minutes and not moving, any ideas?

  • Multiple Multiple Numeric Limit Test

    Hello I have a test that I have written (LabVIEW) that produces 2 arrays of numeric Values. 1 array of Gain data and 1 array of Noise data. I want to apply (different) limits to each array (Same limit for each element within array). How do I do this

  • Proxy client configuration

    Is there any way other than generating the pac file to configure the browser client. I manually set the server and port but this does not work. packet capture shows 407 error. pac files don't work well with my app. I appreciate any thoughts or commen