Not using a theme with JSF

I really like JSF but I do not like the theme. Is there a place where I can find a selection of themes or to find a theme that has no look and feel (Regular OS driven buttons and inputs)?

OK, I found the following:
Exempting a Backup from the Retention Policy
The BACKUP ... KEEP command can create a backup that is retained for a different period of time from that specified by the configured retention policy. The backup is still a fully valid backup, however, and can be restored just as any other RMAN backup. This type of backup is called a long-term backup.
Note:
The KEEP FOREVER clause requires the use of a recovery catalog.
I am definitely curious as to the suggested backup format for the Yearly backup now, is an image copy any better than an exp? I guess the assumption is that you may be on a newer version of Oracle when the request to restore the archive comes around. Does that factor in?
-cf

Similar Messages

  • I am making my first keynote presentation.  I transferred the slides from a power point.  I did not use a 'theme' from keynote.  Keynote will not let me 'name' the presentation and the 'save as' option will not come up in the menu.  What have I done wrong

    I am making my first keynote presentation.  I transferred the slides from a power point.  I did not use a 'theme' from keynote.  Keynote will not let me 'name' the presentation and the 'save as' option will not come up in the menu.  What have I done wrong

    When it comes to Keynote, I try and start with a presentation that's 1680 x 1050 preset or something in that range.  Most projectors that you'll get at a conference won't project much higher than that and if they run at a lower resolution, it's better to have the device downsize your Keynote.  Anything is better than having the projector try and upsize your presentation... you work hard to make it look good, and it's mangled by some tired Epson projector.
    As far as slides go, scan them in at 150 dpi or better, and make them at least the dimensions of your presentation.  Keynote is really only wanting 72dpi, but I do them at 150, just in case I need to print out the presentation as a handout later, and having the pix at 150 dpi gives me a little help with their quality on a printer.
    You'd probably have to drop in the 150 versions again if you output the Keynote to .pdf or Word or something, but at least you have the option.
    And Gary's right (above) go ahead and scan them as TIFFs.  Sooner or later you'll want to do something else with these slides (like make something for an iPad or the like) and having them as TIFFs keeps your presentation looking good.
    Finally, and this is a big one, get to the location for your presentation ahead of time if you can, and plug the laptop in and see what you get.  There's always connection problems. Don't let the AV bonehead tell you everything will work just fine ('... I don't have any adapters for a Mac...') .  See it for yourself... you're the one that's standing up there.  Unless it's your boss, then you better be really sure it works.

  • I can not use CanoScan N670U with my Macbook pro. I download canoscan toolbox 4.1 from Cannon website. It keep saying "the scanner plug-in was not found". Please help

    I can not use CanaScan N670U with my Macbook Pro. I download Canoscan toolbox 4.1 from Cannon websit. It still keep saying "The scanner plug-in was not found". Please help

    There is a solution (I'm running Snow Leopard on a Core2Duo iMac, but this problem arose when I was running Leopard on a G4 PowerBook too).
    Problem:
    You download the OS X driver for the scanner from Canon's site. I already had the CanoScan Toolbox (4.1) stored on an external drive.
    You unzip the driver and run the VISE installer. After a search it finds your copy of Photoshop (and maybe even the CanoScan Toolbox), and you click to install on that/those location(s).
    You get a couple of error messages, which you click through.
    You restart your computer and try to run the scanner but you get an error that the driver is wrong or missing and the process will abort.
    Solution:
    BEFORE you restart, and with the installer package still open -
    1. Copy the Into_CFMSupport_Login & Into_CMPrefs folders to
    Applications : Canon Utilities
    Applications : Canoscan Toolbox
    and remove the prefix Into_ from each folder
    2. Check whether the installer placed N067U_Library.shlb into the top level (not User level)
    Library : CFMSupport
    and if it didn't, move it there yourself
    THEN restart, and try again. It worked for me (via Photoshop), but whether it will work for everyone, I don't know.

  • How to use bounding theme with jdbc theme

    Hello
    I'm using oracle maps javascript API to locate geometry with jdbc theme based foi, so how to use bounding theme with jdbc theme? Give me help, thanks.

    Hi,
    You can find some information & code samples at this link :-
    http://download-west.oracle.com/docs/cd/B19306_01/java.102/b14355/xadistra.htm#g1077100
    Regards,
    Sandeep

  • I could not use my mac with projector, because it doesn't show my power point, just home screen.

    I could not use my Mac with projector. The projector does not show my power point, just the wallpaper picture. What should Idi, where can I setting it?

    What format is the video in?

  • Why not use Bridge CS4 with PsCS3?

    I will post this on both the Bridge and Ps User-to-User forums as it applies to both.
    I have PsCS3 and PsCS4 installed side by side in the default folders assigned by Adobe but have shifted my Bridge CS4 Cache (containing all the thumbnails and previews) from C:Documents and Settings\etc to a subfolder within My Documents, which I had previously moved to my F: drive - my main data drive.
    I have found Bridge CS4 to be much more stable than Bridge CS3. Additionally, Bridge CS4 has certain features which make it more attractive and easier to use than Bridge CS3. I want to use Bridge CS4 in conjunction with PsCS3 until Adobe has sorted out the problems with PsCS4 - which at the moment is simply unuseable on my rather old and humble system.
    On my system, I seem to be able to use Bridge CS4 with PsCS3 without any problems detected so far. I even have things set up such that any JPEG, TIFF or PSD file double clicked within Bridge CS4 or within Windows Explorer (Win XP Pro SP3) automatically opens the file in PsCS3 and not PsCS4 (provided, of course, that PsCS4 is not itself already running). Furthermore, even with PsCS3 running beside Bridge CS4, from within Bridge CS4 I can open any RAW, JPEG or TIFF file in Camera Raw 5.1 and use its new features (Adjustment Brush, Graduated Filter, extra vignetting capabilities, etcetera) which were not available in the last release of Camera Raw (4.6 I think) associated with PsCS3. The only problem comes when trying to open edits made in Camera Raw 5.1 in PsCS3 using the "Open Image" button in ACR - it does nothing/won't work, this is, it won't open the image with the ACR adjustments in PsCS3. That's not a big deal for me - as I am currently not doing any work within ACR (any version) and if I needed to I could simply save the ACR edits and then open the files in PsCS4, save the files as PSDs and then open them in PsCS3 to finalise them there.
    Has anyone else had a similar experience, or does anyone else know of any reason(s) why I should not continue to use this workflow, at least in the short term?

    I've been away. Thanks John, Bart and Buko for your responses. Think you misunderstood my post Bart, but it does not matter now. John got the correct message. Buko: of course CS3 cannot use ACR 5.x - that was implicit in my post.

  • How can I reach my iCloud notes using a PC with WinXP.?

    Last week I was on the road and needed to reach some info I wrote on a Note using my iPhone to my iCloud... I left my iPhone at Home and Only had access to an old internet access PC with Windows XP but was not sure how to reach my iCloud notes...  I tried the iCloud site but asking me to setup iCloud on that PC.. The PC had a limited user account so basically I was not able to install anything on it...
    Please let me know... :-)

    Can you clarify how you intend to setup the AirPort Express?
    Obviously, if  you plan to connect the AirPort Express to a modem, the Ethernet port on the Express will be utilized for the Internet connection, so no other Ethernet ports will be available.
    If this is the case,  you will need to look into obtaining a router with 3-4 Ethernet ports to allow both your AirPort Express and computer to connect.

  • ABAP Webdynpro reports in portal do not use portal theme for some elements

    Hi,
    I have an ABAP webdynpro screen which uses, amongst other things, a date navigator and drop down lists.  All aspects of the portal theme seem to be picked up by the webdynpro except the date navigator and drop down lists.  They don't even use the SAP standard ones.  They display as plain text using TimesNewRoman font and not the ones specified in the theme.  They also do not use any of the colours in the theme.  All tables and fields etc are all themed ok.  Any ideas how I can fix this?
    Regards
    Cindy

    Could there be a lockal cache issue?
    Clear you browser cache via Tools > Internet Options >  Delete History
    Try again after clearing the cache, if that doesn't help then try downloading the Internet Explorer Developer Toolbar:
    http://www.microsoft.com/downloadS/details.aspx?familyid=E59C3964-672D-4511-BB3E-2D5E1DB91038&displaylang=en
    ...use this tool to get details about the css and classes aplied to the objects and use it to open a OSS message if it is a SAP WebDynpro application of talk to your developers if it is a Custom WebDynpro app.
    Good Luck,
    Benjamin Houttuin

  • How to make VM to suspend when it not use , VDI3.0 with SGD 4.5

    Hi All,
    We are using SunVDI3.0 with VBox 2.0.10 and connecting via SGD 4.5.
    i konw that we can do suspending vm on vmware esx, however i couldn't find it in VirtualBox provider.
    how to make VM to suspend when vm is not using for some period time.
    thanks in advance
    -kevin-
    Edited by: kevin on Sep 27, 2009 5:44 PM

    Hi All,
    We are using SunVDI3.0 with VBox 2.0.10 and connecting via SGD 4.5.
    i konw that we can do suspending vm on vmware esx, however i couldn't find it in VirtualBox provider.
    how to make VM to suspend when vm is not using for some period time.
    thanks in advance
    -kevin-
    Edited by: kevin on Sep 27, 2009 5:44 PM

  • Why not use "new" operator  with strings

    why we not use new when declaring a String .because in java String are treated as objects. we use new operator for creating an object in java .
    and same problem wiht array when we declare array as well as initialize .here we are alse not using new for array
    why

    Strings aren't just treated as objects, Strings are Objects.
    As for why not using new for Strings, you can, if you want.:
    String str = "this is a string";
    and
    String str = new String("this is a string");
    do the same thing (nitty-gritty low level details about literals aside). Use whatever you like, but isn't it simpler not to type new String(...) since you still need to type the actual string?
    As for arrays, you can use new:
    int[] ints = new int[10];
    or
    int[] ints = { 0, 1, 2, 3, ..., 9 };
    But the difference here is you are creating an empty array in the first one, the second creates and fills the array with the specified values. But which to you often depends on what you are doing.

  • Using  Request Processor with JSF (No Struts)

    Hi
    Im doing some analysis on JSF. My requirement is that I do need the Request Processor of struts to be fit in my architecture. However we are not using Struts. How can the same be achieved using JSF?
    Any help would be much appreciated
    Thanks

    Hi
    Im doing some analysis on JSF. My requirement is that I do need the Request Processor of struts to be fit in my architecture. However we are not using Struts. How can the same be achieved using JSF?
    Any help would be much appreciated
    Thanks

  • How to Import iMovie and not use a Theme??

    Hello,
    I've created a project in iMovie. I want to burn it to a DVD for other to watch and figured the easiest way to do so was to share it to iDVD 6 and burn it from there. I want the project to auto-play aq few seconds after it gets inserted into the player.
    The trouble is, I don't want to use a Theme in this project but every-time I "share" the movie, it gets assigned to a theme and I can't figure our how to get rid of the theme. I tried deleting the themes in ~/Library/Application Support/iDVD/Favorites. but they reappear.
    Please Help.
    MBP 2.33 15" 3Gb Glossy, G4 PB 1,25 15" 2Gb   Mac OS X (10.4.10)   2 G4 Towers, 1 is Web Server, the other: Quicksilver 800

    The way I like to do it is: Create an autoplay DVD with no menu at http://homepage.mac.com/profpixel/AutostartDVD/autostart.htm
    If you don't want the replay feature and would rather have the movie loop (until you quit) - select the movie in the autoplay well and set it to loop.
    BTW, I never 'Share' a movie from iMovie. I simply drag and drop the iMovie project on to an iDVD menu (or into the autostart well).
    F Shippey

  • Compiz gtk decorator not using metacity theme

    so for some reason the gtk decorator in compiz is not using the assigned metacity2 theme what I mean is that not mater what the theme the decorations stays the same
    example:
    the first image is using adawita theme while the second is zukitwo, in either case the decorations persists
    Last edited by nashod (2014-10-16 23:28:50)

    I set this at build time "OXYGEN_FORCE_KDE_ICONS_AND_FONTS 0", I don't know how it's controlled from user-space. But in any case, that's why, and that's what you should disable.

  • Problem using Tomahawk tree2 with JSF RI 1.1

    Hello,
    When I try to run Tomahawk tree2 component on JSF RI 1.1 I am getting the following exception.
    java.lang.IllegalStateException: Duplicate component ID 'billsearch:billSearchForm:NewTabadvanceSearch:subTabOne:clientTree:t2c' found in view.
         at com.sun.faces.application.StateManagerImpl.removeTransientChildrenAndFacets(StateManagerImpl.java:191)
         at com.sun.faces.application.StateManagerImpl.removeTransientChildrenAndFacets(StateManagerImpl.java:199)
         at com.sun.faces.application.StateManagerImpl.removeTransientChildrenAndFacets(StateManagerImpl.java:181)
         at com.sun.faces.application.StateManagerImpl.removeTransientChildrenAndFacets(StateManagerImpl.java:181)
         at com.sun.faces.application.StateManagerImpl.removeTransientChildrenAndFacets(StateManagerImpl.java:181)
         at com.sun.faces.application.StateManagerImpl.removeTransientChildrenAndFacets(StateManagerImpl.java:181)
         at com.sun.faces.application.StateManagerImpl.removeTransientChildrenAndFacets(StateManagerImpl.java:181)
         at com.sun.faces.application.StateManagerImpl.removeTransientChildrenAndFacets(StateManagerImpl.java:181)
         at com.sun.faces.application.StateManagerImpl.removeTransientChildrenAndFacets(StateManagerImpl.java:181)
         at com.sun.faces.application.StateManagerImpl.saveSerializedView(StateManagerImpl.java:85)
         at org.ajax4jsf.framework.ajax.AjaxStateManager.saveSerializedView(AjaxStateManager.java:90)
         at com.sun.faces.taglib.jsf_core.ViewTag.doAfterBody(ViewTag.java:169)
         at jsp_servlet._pages.__billsearchinit._jspService(__billsearchinit.java:156)
         at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:223)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
         at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:500)
         at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:245)
         at com.sun.faces.context.ExternalContextImpl.dispatch(ExternalContextImpl.java:322)
         at com.sun.faces.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:130)
         at org.ajax4jsf.framework.ViewHandlerWrapper.renderView(ViewHandlerWrapper.java:108)
         at org.ajax4jsf.framework.ajax.AjaxViewHandler.renderView(AjaxViewHandler.java:229)
         at com.sun.faces.lifecycle.RenderResponsePhase.execute(RenderResponsePhase.java:87)
         at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:200)
         at com.sun.faces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:117)
         at javax.faces.webapp.FacesServlet.service(FacesServlet.java:198)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:223)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
         at org.ajax4jsf.framework.ajax.xmlfilter.BaseXMLFilter.doXmlFilter(BaseXMLFilter.java:96)
         at org.ajax4jsf.framework.ajax.xmlfilter.BaseFilter.doFilter(BaseFilter.java:220)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
         at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:501)
         at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:245)
         at weblogic.servlet.jsp.PageContextImpl.forward(PageContextImpl.java:148)
         at jsp_servlet.__index._jspService(__index.java:101)
         at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
         at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:223)
         at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
         at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
         at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
         at org.apache.myfaces.webapp.filter.ExtensionsFilter.doFilter(ExtensionsFilter.java:147)
         at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
         at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3243)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
         at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
         at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2003)
         at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1909)
         at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1359)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)Any help would be highly appreciated. I have tried setting my own id's to each and every component. But this throws me a different error and it doesn't let me set the id's manually. The error message is:
    Error 500--Internal Server Error
    java.lang.IllegalArgumentException: 1
         at javax.faces.component.UIComponentBase.validateId(UIComponentBase.java:462)
         at javax.faces.component.UIComponentBase.setId(UIComponentBase.java:279)
         at javax.faces.webapp.UIComponentTag.createComponent(UIComponentTag.java:1016)
         at javax.faces.webapp.UIComponentTag.createFacet(UIComponentTag.java:1059)
         at javax.faces.webapp.UIComponentTag.findComponent(UIComponentTag.java:740)
         at javax.faces.webapp.UIComponentTag.doStartTag(UIComponentTag.java:429)
    Any help or hint on solving this problem is highly appreciated.
    Thanks in adv.
    ~SirG

    Richfaces is compatible with JSF 1.1 and 1.2 and also with great ui part
    but it may conflict with the other tomahawk component and filters

  • Can i use these themes with my 3110 classic

    Hi, i use a free sit to download wallpapers, screensavers and themes.
    Can i use themes for a Nokia 6085 with my 3110 classic as i think they use the same operating system or software and the screens are the same etc, thanx.

    I know for a fact there is no Mac version of Act. You'd have to contact the authors of Centerpiece to see if they make a Mac version.
    If not, then the answer to both is no.

Maybe you are looking for