Not using Backflush in Industry Process

Hi all,
First of all, I'm using Industry Process.
I wouldn't like to work with Backflush to make the material movements manually later, but I don't get it.
Master Data's:
Material master data: Backflush: "2 - Work Center decides"
Work Center (Resource), the Backflush is not marked
In the Process Order, in the BOM, the flag is not market too
The only strange thing I realised is in the Recipe, the material IS NOT assigned to any operation/phase. But, when I did the Process Order, the systems did an assignment automatically to the first operation. Is when I confirm that operation when the system did automatically the movement.
Anybody knows why is this assignament done? In a process order, the materials have to been allways assigned?
Thank's in advance!!
Roger

Hi,
If the Components are not assigned to any operation in the Recipe, then by default all the coponents will be assigned to the First operation in the Process Order.
If you assign your components to diffrenent operations then only they will be allocated in th Process Order.
This is the Standard behavior.
If your componants are Backflushed automatically evnthough there is no Backflush indicator is maintained in the Material Master..
Then Check the settings in OPK4 (for your Plant and order Type combination)
All Components must have Ticked in the "Generally Valid Settings" Tab page.
Hope this clarifies...
Revert for further discussion.
Regards,
Siva

Similar Messages

SAP job not using all dialog processes that are available for parallel processing

He Experts,
The customer is running a job which is not using all the dialog processes that are available for parallel processing. It appears to use up the parallel processes (60) for the first 4-5 minutes of the job and then maxes out about 3-5 processes for the remainder of the job.
How do I analyze the job to find out the issue from a Basis perspective?
Thanks,
Zahra

Hi Daniel,
Thanks for replying!
I don't believe its a standard job.
I was thinking of starting a trace using ST05 before the job. What do you think?
Thanks,
Zahra

Keys in GeneratorText.properties not used !!!

hi all,
I found in GeneratorText.properties some keys ignored and are not used in the generation process like: NOT_NULL_VIOLATION, CHECK_CONSTRAINT_VIOLATION
How can I generate these keys in the *.properties files to translate error messages?
yours,
Bassam

Bassam,
The CHECK_CONSTRAINT_VIOLATION and NOT_NULL_VIOLATION are a left over from older JHeadstart version that also supported TopLink,and are no longer used.
To get user-friendly error message for your check constraints, just make sure they are included in the entity object XML.
Not null violations can easily be handle inside ADF Business Components by making an attribute required.
Steven Davelaar,
JHeadstart Team.

Error: Message interface is not used by this process Netweaver PI 7.0

Hi All,
I am receiving this error in file to idoc scenario. The file is being picked up by communication channel. Then through an interface mapping IM_MET_ROUTE is being forwarded to a BPM MET_FILE_ROUTE. The MET_FILE_ROUTE forwards it to different BPM depending on file type. whenever I am posting a file it is not reaching IM_MET_ROUTE and giving an error as shown below.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">MESSAGE_NOT_USED</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Message interface is not used by this process</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Can you please suggest any solution to remove the error.

Hi All,
Thanks a lot Vikrant for your suggestion. The error is resolved. This was not a configuration problem. This was a design problem. Initially I also looked for configuration changes but that was correct hence I came to conclusion that this might be a design isuue.
These are the steps that we should follow to resolve the errors
1. First Check your configuration again and again with test tool and payload to find where exactly your configuration is failing.
2. The above step will not be successful since we are already receiving the error.
3. The above test will fail in interface determination step.
4. Please go through the interface determination in Integration repository(PI 7.0).
5. Check whether all interface mapping,source and target message interface are proper or not.
6. if receiver or sender of message is an BPM please look into their receiver and sender element message type.This must match with the one specified in Interface mapping defined within Integration directory( in the interface deterination step).
In my case the sixth step above was the solution.

BPM : Message interface is not used by this process

Hi,
In BPM : to pass the message facing error as below.
Messages not reflecting in BPM monitor.
I have configured Recveiver - transformation - sender in BPM.
In recvier in BPM is configured with Abstract Type as same in the message mapping.
Is there any thing i am missing?
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">MESSAGE_NOT_USED</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Message interface is not used by this process</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have refered links but not able to get the clue for this error as its from the Call adapter.
error: Message interface is not used by this process Netweaver PI 7.0
BPE_ADAPTER: MESSAGE_NOT_USED
Regards,

Hi,
I just saw your IP design and from this I can see that you have message mapping between Sender(as in Outbound interface MIOASY) and abstract interface (as in MIAASY) and then in that you have used transformation step to utilise Interface mapping which is between same abstract interface which is not required at all as message type for both the interfaces is same. For me, what your configuration would be is
1. Sender agreement to fetch the message from outbound interface(MIOASY) utilising communication channel with whatever adapter you have used
2. Receiver Determination with Sender and sender interface as MIOASY while receiver as IP(Integration process)
3. Interface determination between
    a. Sender and Outbound interface and Abstract interface with interface mapping IM_Sender
    b. IP as sender with abstract interface MIAASY and receiver interface MIIASY with no interface mapping being used as it must be of same type as receiver interface is
4. Receiver agreement with MIIASY being used as receiver interface and communication channel utlililsed to convert it into receiver format.
If I am assuming it correct then if you see then inside BPM we are not using receiver interface MIIASY which is why I feel this error is coming.
However, if you design it something like this then I feel the error would get resolved
Design
1. Make one abstract interface (MIAASY_Sen) of same type as sender, and create another abstract interface (MIAASY_Rec) of same type as your receiver message type
2. Create message mapping between sender message type and receiver message type, Interface mapping IM_ABS - (MM_ABS_ABS) between sender abstract interface (MIAASY_Sen) and receiver abstract interface (MIAASY_Rec)
3. BPM should be something like this
   Container:*
rec Abstract Interface MIAASY_Sen
send Abstract Interface MIAASY_Rec
Receiver (rec) - Transformation (IM_ABS) - sender (send)
Configuration
1. Sender agreement to fetch the message from outbound interface(MIOASY) utilising communication channel with whatever adapter you have used
2. Receiver Determination with Sender and sender interface as MIOASY while receiver as IP(Integration process)
3. Interface determination between
    a. Sender,Outbound interface MIOASY and Abstract interface MIAASY_Sen with no interface mapping
   b. IP as sender with abstract interface MIAASY_Rec and receiver interface MIIASY with no interface mapping being used as it is of same type as receiver interface is
4. Receiver agreement with MIIASY being used as receiver interface and communication channel utlililsed to convert it into receiver format.
Let me know if it works.
Regards,
Amit

BPE adapter : message not used by any process

hi frnds,
I've created 2 scenarios using BPM
1) merge scenario: 2 msgs ==> BPM ==> 1 msg
1st msg is going without any problem. but 2nd msg is giving error saying 'BPE ADAPTER ERROR: message not used by any process'. i checked in sxi_cache and found that return code for Intg'n process is 0 only. but still i tried reactivating. but no use
2) split scenario: 1 msg ==> BPM ==> 2 msgs
sender msg is going without any problem,but not receiving 2 rcvr msgs to the target directory. return code of IP is 0 and no other errors.
after installing PI on my system, for the first time i'm trying BPM scenarios. simple file to file working properly. BPE adapter has to be activated manually or i missed any initial configuration??? pls help me to resolve this.
thanks.

abhishek,
I have used the following steps in BPM for this scenario xml file ==> BPM ==>xml file
1) data types: a)send_dt
                        b) rcv_dt
2) msg types a) send_mt
                        b)rcv_mt
3) interfaces   : send_ob_im
                          send_abs_im
                          rcv_abs_im
                          rcv_ib_im
in integration process,
start ==> receive ==> send ==> stop
so in general its like,
send CC ==> send OB I/F ==> send ABS I/F ==> rcv ABS I/F ==> rcv IB I/F ==> rcv CC
when i'm not using BPM, outbound queue SMQ1 is empty and messages are not stickking up there. but if i use BPM, SMQ1 is having entry saying 'SYSFAIL'. for the first time i'm doing the BPM scenarios.
thanks.

BPE_ADAPTER MESSAGE_NOT_USED Message is not used by any processes

We need some help on BPM flow. We are at it for last 3 days without much progress. We are able to make sync call to same BAPIs and get data without any issue. However, with BPM we have this issue
I am creating the simplest integration scenario as
1.       HTML/HTTP-->BPM (Async)
2.       BPM-->R/3 (Sync)
3.       BPM-->File (Async)
Created all required interfaces and mapping. I have some dummy mapping for first 2 cases. I am able to activate the integration scenario and Integration Process without any error. I am able to import it in integration directory successfully without any error. When I am executing the first async request from HTML client I am invariably end up with an error from sxmb_moni as
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">MESSAGE_NOT_USED</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Message is not used by any processes</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
The BPM is not getting invoked. Looking at the trace it shows that there is an error after creating BPE proxy for message as
<Trace level="3" type="T">created BPE proxy for message DE5FB5802F33D3F19373005056A12466</Trace>
</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 007</Trace>
<Trace level="3" type="T">Message version 007</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
<Trace level="3" type="System_Error">Error exception return from pipeline processing!</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
What I have checked so far:
1.    I have checked that the developer key is assigned to my user id
2.    Used SWF_XI_CUSTOMIZING to make sure that all the process are green
3.    Used sxi_cache to make sure that the BPM process has return code 0 and also reactivated it numerous times. Also checked activation log and no error there
4.    Used SXMP_ADM_BPEAutomatic BPM Customizing to check all the entries are green
5. There are not any message in sxmb_moni_bpe for my interface shows no message
Input call has:
1.    Sender Service: MFG_BPM_BusinessSystem
2.    Sender Interface: MI_Outbound_Async
3.    Quality Of Service: EO
4.    Sender Name space: Name space
5.    Input XML:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:BAPI_SALESORDER_GETLIST xmlns:ns0="urn:sap-com:document:sap:rfc:functions">
   <CUSTOMER_NUMBER>0000001000</CUSTOMER_NUMBER>
   <DOCUMENT_DATE/>
   <DOCUMENT_DATE_TO/>
   <MATERIAL/>
   <MATERIAL_EVG>
      <MATERIAL_EXT/>
      <MATERIAL_VERS/>
      <MATERIAL_GUID/>
   </MATERIAL_EVG>
   <PURCHASE_ORDER/>
   <PURCHASE_ORDER_NUMBER/>
   <SALES_ORGANIZATION>1000</SALES_ORGANIZATION>
   <TRANSACTION_GROUP/>
   <SALES_ORDERS>
      <item>
      </item>
   </SALES_ORDERS>
</ns0:BAPI_SALESORDER_GETLIST>
Any clue, help pointer will be of great help. Just beats me, what is wrong!!
Version:
SAP R/3 ECC 6.0
XI 7.0

Hi,
Please check these threads where they have the same issue:
Message is not used by any processes
Error: Message is not used by any processes
Error: BPE_ADAPTER Message not used in any process
Message is not used by any processes
---Satish

Message is not used by any processes

Hi,
I've made a BPM and in sxmb_moni I get this:
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">MESSAGE_NOT_USED</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Message is not used by any processes</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I check my return code in sxi_cache and it's not 0 after activating.
How could I resolve this error?
Thanks in advance,
Samantha.

Hi,
I don't understand "Is the BPM instance being created in the first place?". I've created the BPM for the first time, I don't know if you refer to this.
When I click on PE, I get: "the action is not valid for the selected message", so I can do nothing.
I think my user has developper key, although I'm going to make sure of it.
Thanks,
Samantha.
Message was edited by:
Samantha Núñez

Message interface is not used by this process

Hi,
I´ve created a process to get a txt file in the O.S., verify this file and create another file. This verify I´m using BPM but there is an error message:
"SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">MESSAGE_NOT_USED</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Message interface is not used by this process</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>"
Could you help me,
thanks,
Renato

Hi Renato,
Can you please elaborate what you did you do to eliminate the problem. I am facing the same one now.
A file is received followed by FCC and then a interface mapping is to be called. somehow the system is unable to find the necessary mapping and giving this error.

Error: BPE_ADAPTER Message not used in any process

Please help me fix this error.
My scenario is i have a bpm process for merging three files.
and i configured in this way..
merge the three files into one and send into SAP
i have three communication channels (file adapter) for three files
one communication channel xi adapter for a proxy into sap.
using these files as input to BPM process
then using BPM process as sender to the proxy reciever
I am getting error from sxmb_moni in xi box
as error category:BPE_ADAPTER
error id: message_not_used.
it says message not used in any process.
please help me correct this problem..
thanks
jp

JP,
Are u sure there is nothing wrong in your design part? Also Are u using Fork to receive 3 files parallely, If yes then all the 3 files has been checked for start process? Can u confirm this.
Also in the Inerface determinations did u gave abstract interfaces that BPM is recieving?
Best regards,
raj.

Hello- I am a Canon photographer. I use Bridge (CS5) to process my raw files to jpegs. I am taking on a second photographer who shoots Nikon (D800) and i am not currenty able to see or process his images. Can you please help? thankyou!

Hello- I am a Canon photographer. I use Bridge (CS5) to process my raw files to jpegs. I am taking on a second photographer who shoots Nikon (D800) and i am not currently able to see or process his images. Can you please help? thank you!

According to Adobe:
D800
NEF
6.7, 7.1
4.1
D800E
NEF
6.7, 7.1
4.1
The fact that they have 2 versions of ACR means that initial support for the D800 was added in 6.7 but that complete support was finalized in 7.1 (the 4.1 in the chart is for Lightroom)
I'm not sure that this means there are missing features, but rather refinements and optimized settings were added in 7.1
However, ACR 7.1 requires CS6.
As Dag mentioned, you can also use the latest version of DNG Converter to convert the D800 files to DNGs which will be able to be opened in older versions of ACR.
The DNG converter only works on folders of files, not individual files. So just select the folder and convert. All the files in the folder will be converted.

HT201210 Pls i was trying to update my iphone 3G to software version 4.2 using itune. The process did not complete succesfully. I then decided to restore back my restore my prevoius version 4.1, it stopped with an error code1015. Pls i need help

Pls i was trying to update my iphone 3G to software version 4.2 using itune. The process did not complete succesfully. I then decided to restore back my restore my prevoius version 4.1, it stopped with an error code1015. Pls i need help

Go here: http://www.iclarified.com/entry/index.php?enid=750 and download iOS 4.2.1 for the iPhone 3G. Perform a restore, but hold down ALT when clicking restore. Restore from this file you just downloaded. You should not get 1015 as you are upgrading, but if you get a different error, report back.

Cisco Could not process the RSN and WARP IE's. station not using RSN

I keep getting this over and over in my syslog. I haven't been able to find anyhting out about it.
Could not process the RSN and WARP IE's. station not using RSN

Sounds like the infrastructure is configured for WPA1 and the client for WPA2.

HT1212 I need help with my ipod it says that I can not use it until 22,513,226 what can I do to speed up the process

Can not use my device until 22513226 minutes can you help

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

How to setup a remote recovery process - Not using Data Guard?

Hello -
Has anyone (or can send me some links) set up recovery at a remote site - and not used Data Guard? For example, shipped off logs via FTP, applied the logs, and kep the DB in recovery mode?
Thanks!

Mlike,
This manual procedure is described in the Dataguard Concepts manual for 10gR2, hopefully is this your unmentioned version (BTW what happens if you do type your version? Does your boss beats you up for doing that?). I don't know why someone wants to replace something robust by something unreliable by default, using FTP. Not only unreliable, also unsecure!
Sybrand Bakker
Senior Oracle DBA

Not using Backflush in Industry Process

Similar Messages

Maybe you are looking for