Not using WiFi when 'asleep'

I've noticed this a few times now on my home network.
When I wake my iPhone from sleep (ie. the screen is off but the phone is on) I have noticed that the 3G icon is displayed for a second before the Airport (WiFi) icon appears. Does this mean that the iPhone 3G uses only the 3G network when sleeping and it only uses the WiFi network when 'awake'?
Has anyone else noticed this?
Regards,
Paul Martin

nitramluap wrote:
That is not a very useful response but thanks for your input...
Different carriers around the world have different arrangements for data. When I say 'non-existant' I'm talking about people that pay next to nothing for the phone plan and only get 5MB per month of data.
My argument is that if you're connected to your home network it would be *reasonable to assume* that ALL data is coming via your own network. There is nothing in the manual that would suggest otherwise. It should at least keep WiFi on if the iPhone is plugged in and charging.
Regards,
Paul Martin
Personally i don't care about other people's plans. Only my own. If it's not very useful, then stop asking stupid questions about when your not even using the phone.

Similar Messages

Post Moved Galaxy-Note-dropping-Wifi-when-using-...

Pot moved http://community.bt.com/t5/Other-BB-Queries/Galaxy-Note-dropping-Wifi-when-using-HH3/td-p/671308
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

I think I found the answer to my own question (no thanks to Verizon)!
I found this article online which was written recently (2012) and explains the WIFI - Bluetooth interference pretty well. Here is the link:
http://www.ecnmag.com/articles/2012/03/wi-fi-and-bluetooth-coexistence
The way it has been explained is that if the WIFI & BT radios are on the same chip and using the same antena to send and receive, they WILL interfere no matter what. Having them on two different chips is the best way. But Frequency Isolation (Adaptive Frequency Hopping (AFH)) is a way to reduce interference when they are both on the same chip (as it is in Galaxy Note 2 & S3 - they have Broadcom BCM4330 for wifi/bluethooth/FM) which I guess needs to be addressed in a software update (or may be it already has and is not working well). The last solution is to use 5GHz band for WIFI.
There you have it. But please let me know what you think and if you have found out anything else.
Thanks

One of my friend stole my iphone 5 and he knows my password for the phone but he's not using wifi or the sim network cause he knows that I enabled find my iphone and I wanna lock it or burn the phone he is using my pictures

one of my friend stole my iphone 5 and he knows my password for the phone but he's not using wifi or the sim network cause he knows that I enabled find my iphone and I wanna lock it or burn the phone he is using my pictures and he has shared most of my pictures and the find my phone says it will erase the phone once it will be contact to the internet
what about if he didn't? what to do pls I need to lock the phone as soon as possible am living in saudi arabia and we dont have apple store here to support me I need to contact anyone in apple store so I can give him the serial numbere and IMEI so they lock the phone with out waiting him to contact to the internet
I made a report but the problem is it was stolen from of my best friends and I dont know which one we were 4 persons in my house so I dont know which one exactly but it seems I was unlucky to chose them as best friends and trusted them for 2 years and now he's shairing my privte pictures which has dameged my life and if the goverment saw my pictures they will but me in jail for those pictures which is noraml gay pictures but our country difficutl pls any one help me

What To Do If Your iDevice Is Lost Or Stolen
If you activated Find My Phone before it was lost or stolen, you can track it only if Wi-Fi is enabled on the device. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T. Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. What to do if your iOS device is lost or stolen
6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
7. Find My iPhone
8. Report Stolen iPad | Stolen Lost Found Online
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on iCloud
3. OS X Lion/Mountain Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)

Will my Mac automatically stop using wifi when connected to an Ethernet enabled thunderbolt display?

Will my 2012 Macbook pro retina automatically stop using wifi when connected to an Ethernet enabled thunderbolt display?

Depends.
If you go in System Preferences / Network, you will see a list of all the network interfaces your current configuration has. If you click on the gear icon next to the minus sign, the drop menu will offer "Set Service Order...". There you can prioritize the order of use: Ethernet above Wi-Fi and wireless will be ignored if Ethernet is available.
Note that the Wi-Fi card will remain active and associated with an access point nonetheless. It just won't be used for communications by the OS and apps.

How do I find a previously passcode to link a wireless keyboard (Model A101urs6) to a Mac Power Book G4 running 10.5.8. The keyboard was linked at one point in the past, but then not used. When I am trying to hook it up now, it requires the passcode.

How do I find a previously passcode to link a wireless keyboard (Model A101urs6) to a Mac Power Book G4 running 10.5.8. The keyboard was linked at one point in the past, but then not used. When I am trying to hook it up now, it requires the passcode. Where can I find this, or is there a general number I can use?

Hello, and welcome to Apple Support Communities!
Try entering four zeroes.

HT4623 How come I can not use WIFI to update the new IOS in my iPhone 5 ? the screen pop up " you no longer connection to Internet " . And I won't be able to download any Apps using Wifi, the screen popup " can not connect to iTunes stores " ..

I can not use Wifi at home to download Apps . The screen pop up " can not connect to iTunes Store " ?? I am using iPhone 5 . I used to be able to download any Apps before .
I can not even download the new IOS which Apples sent to my phone to update . ???? Please help !!!
My husband is using IPhone 5 and his phone is fine , he can use WIFI to download any apps or update any software from apple . Does that mean my phone have problem , not my WIFI right ???
Now, I have to use my data plan to download any Apps which waste my money :( Thanks a lot !!

Hello phonphon,
We've got an article that can help restore your phone's connection to the iTunes Store while on your WiFi network.
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Cheers,
Allen

TS1398 wifi networks are not shown and can not use wifi in my iPhone 4s since upgrading to iOS 7, any help available to fix this problem

My iphone 4s is not showing the wifi networks after upgrading to ios 7, can not use wifi anymore....any guidance to fix the problem?

You can't downgrade the iOS level.
Try using Settings > General > Reset > Reset Network Settings.

[Repost] Kodo do not use cache when resolving references to objects?

Abe,
I noticed that if object A references object B and we read multiple A
object which reference the same B object, this B object will be re-read
from database for every fetched A object. If I read 100 A-object
referencing the same B it will do 100 selects on the same B. I use
optimistic transactions with retain values = true
Could you please comment on it
Thank you very much
Alex

Was there something else about this you'd like me to comment on?_
No Abe that is it. I was not sure I am not doing something wrong. I
seemed very strange to me that internal reference resolution completely
ignore cache.
I think it is quite important - you want believe how much it slows down
object graph retrieval. It does not seem to be hard to implement. :-)_
I guess when resolving a reference you would have to use the same
validate _true/false settings as for retrieving object?
-----Original Message-----
From: White, Abe [mailto:[email protected]]
Sent: Monday, August 06, 2001 6:10 PM
To: JDO-ListServ
Subject: RE: [Repost] Kodo do not use cache when resolving references to
objects?
this B object will be re-read_
from database for every fetched A object_Yes, this seems like inefficient behavior that we should optimize. The
same B instance is returned from each relation, so it is not a bug, but
obviously it is something we could be doing a little more intelligently.
Thanks for pointing it out!
Was there something else about this you'd like me to comment on?_

Kodo do not use cache when resolving references to objects?

I noticed that if object A references object B and we read multiple A
object which reference the same B object, this B object will be re-read
from database for every fetched A object. If I read 100 A-object
referencing the same B it will do 100 selects on the same B
Alex

Was there something else about this you'd like me to comment on?_
No Abe that is it. I was not sure I am not doing something wrong. I
seemed very strange to me that internal reference resolution completely
ignore cache.
I think it is quite important - you want believe how much it slows down
object graph retrieval. It does not seem to be hard to implement. :-)_
I guess when resolving a reference you would have to use the same
validate _true/false settings as for retrieving object?
-----Original Message-----
From: White, Abe [mailto:[email protected]]
Sent: Monday, August 06, 2001 6:10 PM
To: JDO-ListServ
Subject: RE: [Repost] Kodo do not use cache when resolving references to
objects?
this B object will be re-read_
from database for every fetched A object_Yes, this seems like inefficient behavior that we should optimize. The
same B instance is returned from each relation, so it is not a bug, but
obviously it is something we could be doing a little more intelligently.
Thanks for pointing it out!
Was there something else about this you'd like me to comment on?_

Why can't I use wifi when the LTE is active?

Why can't I use wifi when LTE is active?

did you turn wi fi on in settings?

5800: Java applications do not use Wifi connection

Using my 5800 phone, Java applications (e.g. Opera Mini) always use a 3G connection despite Wifi is available.
When I moved the 3G access point to another section under 'Destinations' in my connectivity setup, so I left
only Wifi connections in my 'Internet' section, Java applications do not connect to the internet anymore.
I want to let me select preferably Wifi when available.
Other applications (Web, Google Maps) work correctly.
Any ideas on this ?
Nokia 5800
FW 30.0.011

The only java app that I had that issue with was opera mini.
Solved it by doing this:
Menu > Settings > Application Mgr. > Installed Apps. > Select "Opera Mini" > Options > Suite Settings > Access Point
I then selected my wireless router.
Soon after I decided that opera mini was more trouble than it's worth due the sites that didn't work properly and switched back to the standard browser.
The setting above should work for other java apps that don't behave too, each app retains it's own individual settings.

I can not use wifi on device but 3g is connecting to internet fine. help?

My BB curve is a UK vodafone based phone and I have had no problem with web connection until I moved to Ireland. I put an irish vodafone sim card in and could not use my wifi any more. When I am back in the uk and put my original uk vodafone sim card back in my device I cannot get the internet through wifi either. 3g connection works fine where ever I am situated. In both instances my device is showing it is connect to a wifi signal but I cannot browse the web as a window is poping up stating there is a problem/cannot connect. Vodafone staff have been unable to help me. Any advice would be greatly appreciated.

Try repair Quicktime.
START/CONTROL PANEL/PROGRAMS n FEATURES/highlight QUICKTIME and click REPAIR button

IPad will not use wifi, prefers 3g

Lately my iPad seems to have started using the 3G network in preference over the wifi. At home we have terrible mobile coverage and so previously the ipad would use my homw wifi with great success. Now it has to think about every page and every download trying to connect to one bar of network coverage. I have tried turning the cellular data off and it sees the wifi fine but if I open safari it says it cant see the internet despite the fact that the other computers in the house are happily connected to the internet via wifi.When the cellular data is on the wifi symbol does not appear. I hav tried renewing the lease, i have a fixed IP address for the iPad. Any ideas?

Sounds like you are having problems with your router or its configuration.
What make, model, and version router do you have? Have you checked that it has the latest firmware installed?
The fact that you are using a static IP is a bit alarming. Why are you using static IPs? Are you sure that there is not an IP conflict with another one of your devices? Is your static IP outside the DHCP IP allocation range set in your router?
Try restarting your router by removing power for 30 seconds and restarting to see what affect this has.

Not using Index when SDO_RELATE in Spatial Query is used in LEFT OUTER JOIN

I want to know for every City (Point geometry) in which Municipality (Polygon geometry) it is.
Some cities will not be covered by any municipality (as there is no data for it), so its municipality name should be blank in the result
We have 4942 cities (point geometries)
and 500 municipalities (polygon geometry)
SELECT T1.NAME as City, T2.NAME as Municipality
FROM CITY T1
LEFT OUTER JOIN MUNICIPALITY T2 ON SDO_RELATE(T1.GEOM, T2.GEOM, 'MASK=ANYINTERACT') = 'TRUE'The explain plan for this query is:
SELECT STATEMENT
FILTER
    Filter Predicates
      MDSYS.SDO_RTREE_RELATE(T1.GEOM, T2.GEOM, 'mask=ANYINTERACT querytype=window ') = 'TRUE'
    MERGE JOIN
      TABLE ACCESS              CITY               FULL                            11
      BUFFER                                       SORT                        100605
          TABLE ACCESS          MUNICIPALITY       FULL                            20So the cost is in the BUFFER (whatever that is), it takes +2000 seconds to run this, it is not using the spatial index.
And we are not getting all rows, but only the ones interacting with a municipality, e.g. 2436 rows.
But I want all rows, including the ones not interacting with any Municipality.
When we want only those cities that actually are in a municipality, I use a different query and it will use the index.
SELECT T1.NAME as City, T2.NAME as Municipality
FROM CITY T1, MUNICIPALITY T2
WHERE SDO_RELATE(T1.GEOM, T2.GEOM, 'MASK=ANYINTERACT') = 'TRUE'I get (only) 2436 rows (as expected) in 5 seconds (it is fast) and the explain plan shows it is using the spatial index.
But in this case, I am not getting any cities not inside any municipality (of course)
SELECT STATEMENT
   NESTED LOOPS
      TABLE ACCESS                   MUNICIPALITY       FULL                22
      TABLE ACCESS                   CITY               BY INDEX ROWID      22
         DOMAIN INDEX                CITY_SDX                                0
            Access Predicates
               MDSYS.SDO_RTREE_RELATE(T1.GEOM, T2.GEOM, 'mask=ANYINTERACT querytype=window ') = 'TRUE'I always thought a LEFT OUTER JOIN would return all rows from the Table, whatever happens in the next,
but it seems the query has been rewritten so that it is now using a Filter Predicate in the end, which filters those geometries having no interaction.
As an example I also do thing alphanumerically, I do get 4942 rows, including the ones which have no Municipality name.
In this case the names must match, so its only for testing if the LEFT OUTER JOIN returns stuff correctly, which it does in this case.
SELECT T1.NAME as City, T2.NAME as Municipality
FROM CITY T1
LEFT OUTER JOIN MUNICIPALITY T2 ON T1.NAME = T2.NAMEIs this an Oracle Spatial bug, e.g. not return 4942 rows, but only 2436 rows on the first query?
Note all tests performed on Oracle 11g R2 (11.2.0.1.0)

Patrick,
Even so, your geoms in the relate were the wrong way around.
Also, I don't recall you saying (or showing) that you wanted the municipality geometry returned. Still,
no matter, easy to do.
Here are some additional suggestions. I don't have your data so I have had to use some of my own.
set serveroutput on timing on autotrace on
SELECT T1.SPECIES as City,
       (SELECT T2.ADMIN_NAME FROM AUSTRALIAN_STATES T2 WHERE SDO_ANYINTERACT(T2.GEOM, SDO_GEOM.SDO_BUFFER(T1.GEOM,10000,0.5,'UNIT=M')) = 'TRUE') as Municipality,
       (SELECT T2.GEOM       FROM AUSTRALIAN_STATES T2 WHERE SDO_ANYINTERACT(T2.GEOM, SDO_GEOM.SDO_BUFFER(T1.GEOM,10000,0.5,'UNIT=M')) = 'TRUE') as geom
FROM GUTDATA T1;
762 rows selected
Elapsed: 00:00:21.656
Plan hash value: 2160035213
| Id | Operation                   | Name                       | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT            |                            |   762 | 49530 |     5   (0)| 00:00:01 |
|   1 | TABLE ACCESS BY INDEX ROWID| AUSTRALIAN_STATES          |     1 |   115 |     0   (0)| 00:00:01 |
|* 2 |   DOMAIN INDEX              | AUSTRALIAN_STATES_GEOM_SPX |       |       |     0   (0)| 00:00:01 |
|   3 | TABLE ACCESS BY INDEX ROWID| AUSTRALIAN_STATES          |     1 |   115 |     0   (0)| 00:00:01 |
|* 4 |   DOMAIN INDEX              | AUSTRALIAN_STATES_GEOM_SPX |       |       |     0   (0)| 00:00:01 |
|   5 | TABLE ACCESS FULL          | GUTDATA                    |   762 | 49530 |     5   (0)| 00:00:01 |
Predicate Information (identified by operation id):
   2 - access("MDSYS"."SDO_ANYINTERACT"("T2"."GEOM","SDO_GEOM"."SDO_BUFFER"(:B1,10000,0.5,'UNIT=M'))='TRUE')
   4 - access("MDSYS"."SDO_ANYINTERACT"("T2"."GEOM","SDO_GEOM"."SDO_BUFFER"(:B1,10000,0.5,'UNIT=M'))='TRUE')
   Statistics
               7 user calls
           24576 physical read total bytes
               0 physical write total bytes
               0 spare statistic 3
               0 commit cleanout failures: cannot pin
               0 TBS Extension: bytes extended
               0 total number of times SMON posted
               0 SMON posted for undo segment recovery
               0 SMON posted for dropping temp segment
               0 segment prealloc tasksThe above can look messy as you add more (SELECT ...) attributes, but is is fast (though can't use in Materialized Views).
/* The set of all cities not in municipalities */
SELECT T1.SPECIES                 as City,
       cast(null as varchar2(42)) as municipality,
       cast(null as sdo_geometry) as geom
FROM GUTDATA T1
WHERE NOT EXISTS (SELECT 1
                     FROM AUSTRALIAN_STATES T2
                    WHERE SDO_ANYINTERACT(T2.GEOM, SDO_GEOM.SDO_BUFFER(T1.GEOM,10000,0.5,'UNIT=M')) = 'TRUE')
UNION ALL
/* The set of all cities in municipalities */
SELECT T1.SPECIES    as City,
       T2.ADMIN_NAME as Municipality,
       T2.GEOM       as geom
FROM GUTDATA T1
       INNER JOIN
       AUSTRALIAN_STATES T2 ON (SDO_ANYINTERACT(T2.GEOM, SDO_GEOM.SDO_BUFFER(T1.GEOM,10000,0.5,'UNIT=M')) = 'TRUE');
762 rows selected
Elapsed: 00:00:59.953
Plan hash value: 2854682795
| Id | Operation           | Name                       | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT    |                            |    99 | 13450 |    38 (87)| 00:00:01 |
|   1 | UNION-ALL          |                            |       |       |            |          |
|* 2 |   FILTER            |                            |       |       |            |          |
|   3 |    TABLE ACCESS FULL| GUTDATA                    |   762 | 49530 |     5   (0)| 00:00:01 |
|* 4 |    DOMAIN INDEX     | AUSTRALIAN_STATES_GEOM_SPX |       |       |     0   (0)| 00:00:01 |
|   5 |   NESTED LOOPS      |                            |    61 | 10980 |    33   (0)| 00:00:01 |
|   6 |    TABLE ACCESS FULL| AUSTRALIAN_STATES          |     8 |   920 |     3   (0)| 00:00:01 |
|* 7 |    TABLE ACCESS FULL| GUTDATA                    |     8 |   520 |     4   (0)| 00:00:01 |
Predicate Information (identified by operation id):
   2 - filter( NOT EXISTS (SELECT 0 FROM "AUSTRALIAN_STATES" "T2" WHERE "MDSYS"."SDO_ANYINTERACT"("T2"."GEOM","SDO_GEOM"."SDO_BUFFER"(:B1,10000,0.5,'UNIT=M'))='TRUE'))
   4 - access("MDSYS"."SDO_ANYINTERACT"("T2"."GEOM","SDO_GEOM"."SDO_BUFFER"(:B1,10000,0.5,'UNIT=M'))='TRUE')
   7 - filter("MDSYS"."SDO_ANYINTERACT"("T2"."GEOM","SDO_GEOM"."SDO_BUFFER"("T1"."GEOM",10000,0.5,'UNIT=M'))='TRUE')
   Statistics
               7 user calls
          131072 physical read total bytes
               0 physical write total bytes
               0 spare statistic 3
               0 commit cleanout failures: cannot pin
               0 TBS Extension: bytes extended
               0 total number of times SMON posted
               0 SMON posted for undo segment recovery
               0 SMON posted for dropping temp segment
               0 segment prealloc tasksMuch slower but Materialized View friendly.
This one is a bit more "natural" but still slower than the first.
set serveroutput on timing on autotrace on
/* The set of all cities in municipalities */
WITH municipal_cities As (
SELECT T1.ID         as City,
         T2.ADMIN_NAME as Municipality,
         T2.GEOM       as geom
    FROM GUTDATA T1
         INNER JOIN
         AUSTRALIAN_STATES T2 ON (SDO_ANYINTERACT(T2.GEOM, SDO_GEOM.SDO_BUFFER(T1.GEOM,10000,0.5,'UNIT=M')) = 'TRUE')
SELECT T1.ID           as City,
       T2.Municipality as Municipality,
       T2.GEOM         as geom
FROM GUTDATA          T1
       LEFT OUTER JOIN
       municipal_cities T2
       ON (T2.CITY = T1.ID);
762 rows selected
Elapsed: 00:00:50.228
Plan hash value: 745978991
| Id | Operation             | Name              | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT      |                   |   762 | 44196 |    36   (3)| 00:00:01 |
|* 1 | HASH JOIN RIGHT OUTER|                   |   762 | 44196 |    36   (3)| 00:00:01 |
|   2 |   VIEW                |                   |    61 | 3294 |    33   (0)| 00:00:01 |
|   3 |    NESTED LOOPS       |                   |    61 | 10980 |    33   (0)| 00:00:01 |
|   4 |     TABLE ACCESS FULL | AUSTRALIAN_STATES |     8 |   920 |     3   (0)| 00:00:01 |
|* 5 |     TABLE ACCESS FULL | GUTDATA           |     8 |   520 |     4   (0)| 00:00:01 |
|   6 |   INDEX FAST FULL SCAN| GUTDATA_ID_PK     |   762 | 3048 |     2   (0)| 00:00:01 |
Predicate Information (identified by operation id):
   1 - access("T2"."CITY"(+)="T1"."ID")
   5 - filter("MDSYS"."SDO_ANYINTERACT"("T2"."GEOM","SDO_GEOM"."SDO_BUFFER"("T1"."GEOM",10000,0.5,'UNIT=M'))='TRUE')
   Statistics
               7 user calls
           49152 physical read total bytes
               0 physical write total bytes
               0 spare statistic 3
               0 commit cleanout failures: cannot pin
               0 TBS Extension: bytes extended
               0 total number of times SMON posted
               0 SMON posted for undo segment recovery
               0 SMON posted for dropping temp segment
               0 segment prealloc tasksFinally, the Pièce de résistance: trick the LEFT OUTER JOIN operator...
set serveroutput on timing on autotrace on
SELECT T1.SPECIES    as City,
       T2.ADMIN_NAME as Municipality,
       T2.GEOM       as geom
FROM GUTDATA           T1
       LEFT OUTER JOIN
       AUSTRALIAN_STATES T2
       ON (t2.admin_name = to_char(t1.ID) OR
           SDO_ANYINTERACT(T2.GEOM, SDO_GEOM.SDO_BUFFER(T1.GEOM,10000,0.5,'UNIT=M')) = 'TRUE');
762 rows selected
Elapsed: 00:00:50.273
Plan hash value: 158854308
| Id | Operation           | Name              | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT    |                   |   762 | 92964 | 2294   (1)| 00:00:28 |
|   1 | NESTED LOOPS OUTER |                   |   762 | 92964 | 2294   (1)| 00:00:28 |
|   2 |   TABLE ACCESS FULL | GUTDATA           |   762 | 49530 |     5   (0)| 00:00:01 |
|   3 |   VIEW              |                   |     1 |    57 |     3   (0)| 00:00:01 |
|* 4 |    TABLE ACCESS FULL| AUSTRALIAN_STATES |     1 |   115 |     3   (0)| 00:00:01 |
Predicate Information (identified by operation id):
   4 - filter("T2"."ADMIN_NAME"=TO_CHAR("T1"."ID") OR
              "MDSYS"."SDO_ANYINTERACT"("T2"."GEOM","SDO_GEOM"."SDO_BUFFER"("T1"."GEOM",10000,0.5,'UNIT=M'))='TRUE')
   Statistics
               7 user calls
               0 physical read total bytes
               0 physical write total bytes
               0 spare statistic 3
               0 commit cleanout failures: cannot pin
               0 TBS Extension: bytes extended
               0 total number of times SMON posted
               0 SMON posted for undo segment recovery
               0 SMON posted for dropping temp segment
               0 segment prealloc tasksTry these combinations to see what works for you.
Interestingly, for me, the following returns absolutely nothing.
SELECT T1.SPECIES    as City,
       T2.ADMIN_NAME as Municipality
FROM GUTDATA           T1
       LEFT OUTER JOIN
       AUSTRALIAN_STATES T2
       ON (SDO_ANYINTERACT(T2.GEOM, SDO_GEOM.SDO_BUFFER(T1.GEOM,10000,0.5,'UNIT=M')) = 'TRUE')
MINUS
SELECT T1.SPECIES    as City,
       T2.ADMIN_NAME as Municipality
FROM GUTDATA           T1
       LEFT OUTER JOIN
       AUSTRALIAN_STATES T2
       ON (t2.admin_name = to_char(t1.ID) OR
           SDO_ANYINTERACT(T2.GEOM, SDO_GEOM.SDO_BUFFER(T1.GEOM,10000,0.5,'UNIT=M')) = 'TRUE');(I leave it to you to see if you can see why as the LEFT OUTER JOIN seems to be working correctly for me but I am not going to dedicate time to detailed checking of results.)
Note all tests performed on Oracle 11g R2 (11.2.0.1.0)
If you get the answer you want: mark the post as answered to assign points.
regards
Simon

Query not using aggregate when written against multiprovider

We have a multiprovider that contains one infocube. The infocube has aggregates defined to it. When writing a query against the infocube, an aggregate is used. However, when writting the identical query against the multiprovider, an aggegate is not used. We are running BI 7.0, Netweaver 2004s, patch set 10. Is there something that needs to be done to the multiprovider to get it to recognize the aggregate?

We have determined the issue to be one of the navigational attributes. It is not used in our query and is not in our aggregate. For some reason, the query against the multiprovider wanted it to be there. After adding it to the aggregate, we were fine. We found this using RSRT and specifying the 'Select Aggregate' option. This gave us a good message as to why the aggregate was not being used. Thanks to everyone for their suggestions.

Not using WiFi when 'asleep'

Similar Messages

Maybe you are looking for