Not visible infoobjects in RSA1
Hi Experts
The infoobjects i activate does not show in RSA1 in the folder infoobjects. I can see them under infosource and some of them under infoprovider in RSA1. Why cantt I see them in the infoobject tree?
Kind regards
Erik
1) If they are time characteristics check in RSD1..
Otherwise, try to relogin or use Search functionality and try again..
Regards,
Hari
Similar Messages
-
IO is active in BC but not visible in RSA1
I have installed one IO '0PO_NUMBER' from Business Content
and have saved in local object.Following way I installed the
infoobject,in the right hand pane its showing active but its not
visible in RSA1.
Steps
1. Dragged the perticular IO-PO_NUMBER to the right pane and dropped there.
2. Grouping - In data flow before
3. Collect - Automatically
4. Install - Install
Now IO is avtive in BC -right pane where we used to drag and drop the IOs.But in RSA1 its not found.
Could somebody tell me why its not found ?Hi BI Experts,
The standard IO that I have installed successfully form
Business Content is showing active but its not visible in
BW system.
Then again,I have deleted the IO form RSD1 and installed
it and got the same result as it was before.
Your suggestions are welcome.
Apart form this,Please tell me how to find inactive IOs in
BW system.
Thanks -
Datasource not visible in rsa1
Hello,
my datasources are not visible in rsa1 -> source systems.
I tried replicate, check connection, repair connection, run report RSAOS_METADATA_UPLOAD, upload metadata, etc.
Now I have no clue.
In roosource datasourse is active (in sourcesystem).
Any idea?Wow!! I loved the way it works :).
I was trying all sorts of things to find out where did my datasource go. then i stumbled upon your recommendation Yogesh. And it did work. everything appeared perfect after i logged off n then login.
Thanks a lot Yogesh.
next time when I get a weird error the first thing i'm goin to do is to log off. -
Installed BC InfoObject 'X' - Can not find it from RSA1, but from RSD1
Hi all,
I have installed the Business Content InfoObject 0ME_REVO_PA. I could find this InfoObject from RSD1 and it is active. I could see it in Business Content section also with Active status, but I can not find it from RSA1 under InfoObjects section. I have to find under which InfoObject Catalog it has been created.
What could be the problem, please ?
Thanks in advance.
Regards.Hi Bhanu,
As per Edwin Harpino's suggestion, ran function module (se37) RSDG_IOBC_REORG
with following Import parameter :
I_OBJVERS A
I_PROGRESS
I_IOBJTP *
I_ALL_IOBJ X
I_T_IOBJNM 0 entries
I_BYPASS_BUFFER
Now, I could see it in RSA1 also.
Thanks. -
Hi,
I have created an infoobject. The search doesn't show the infoobject in RSA1. But, in RSD1, I am able to see the infoobject. I could add it in the transport. Will there be any issue when it is transported?
Thanks.there can be several pssibility why you are not able to find infoobject:
1. it is present in infoobject catalog but not present in infoprovider.
2. it might be placed in a unassigned node.
use the Find option available in the left pane of RSA1 instead of using the option available above and if you find it there then just right click your catalog -> change ->charateristics ->infoobject direct input -> and then give name of your infoobject.
hope it works. -
After activation of atandard business content key figure is not visible
Hi all,
I am trying to implement inventory management scnerio in BW3.5 using screen shot PDF , for this i activate standard business content ( cube : 0IC_c03 ) and activate all its related object . one of my key figure 0RECVS_VAL I want to change its parameter for this when I search this infoobject in Infoobject tree this is not visible
while its present in cube 0IC_c03 ,can anybody tell me for changing in this key figure what can i do???
Thanks and regards
Ankit modiHi
Again it install from BI content and do the changes what ever u want by RSD1
Cheers
Edited by: SDN USER on Jun 26, 2008 12:04 PM -
Hierarchy in properties of characteristics item is not visible in report
Hi,
It has been observed that the Hierarchy name in u201Cproperties of characteristics" of an infoobject for example 0GL_ACCOUNT is not visible in BEx output report. The report shows complete hierarchy with all nodes / subnodes but NOT HEADER description!
Also whenever you change the hierarchy (by changing global / local view), Same problem exist.
This is one of the high priority problem users are facing since they canu2019t see hierarchy name (Key / Text) causing confusion.
Please advice.
Thanks and best regards
RajendraMake a duplicate header above all the levels and show text in the BEx output
Level 1 -> Hierarchy name -> Level 2 ( Initially Level 1) -> Level 3 ( Initially Level 2) -
Currency Conversion type not visible in the query
Hi ,
I created one currency type conversion Z_INR
exchange rate type : M
Exchange rate from infoobject : zexch_rate(key fig)
source curr from data record
Fixed target curr : INR
Variable time reference : A to Exact Day
Special info object : Ztr_date (Transaction date)
it got saved succesfully but wen i try to include this in the query its not visible there . can anyone let me know why this problem is coming
help will be appreciated .
i also included rate and date in the query still not visibleHi,
Create Currency conversion type using Trans: RRC1.
1.Specify your Exchange rate type.
2.Dynamic Exchange rate type
3.Source curency from data rec.
4.Fixed currency say USD.
5.Select Variable Time reference "Start Month" and Special Info Object - 0calmonth
Secondly In the key figure field to be converted in the query, select properties - select the currency conversion key name .
Thanks,
Nagesh
Sony Singapore -
Application Components not visible in SAP R/3 tree
Dear All,
We have standalone system and we have installed ECC 6.0 with BI Content. Harddisk is 320 GB with 2 GB RAM. We want to extract the data from R/3 to BW which are on the same system (As ECC 6.0 contains builtin BW).
In RSA1 the application components are not visible in the SAP R/3 tree under datasource tab. When I am replicating the entire SAP data source it is giving shortdump(STORAGE_PARAMETERS_WRONG_SET).
How can I replicate a particular data source to avoid the memory problems because I have only 2 GB RAM.You can also Replicate a single datasource w/o replicating the App Comp using a FM.
BW
SE37
RSAOS_METADATA_UPLOAD
Execute
Give Source System n Datasource - Execute
*Give Datasource Name - for I_O... & Source System for Logsys. -
Navigational attribute data not visible in BEx Report
Hello All,
I am facing following problem in one of my BEx reports:
I am fetching data from an ODS. With other columns of ODS, I have also to show few navigational attributes( which are master data of some info-object) . In report the corresponding data in navigational attributes is not visible for few records, although when I see the master data of this Info-object (whose navigational attributes I have to include), in Adm. Wrkbench the data is visible. I wonder what step is missing.
Many Thanks for helping me out.
Best Regards,
SumitaHi Roberto,
While trying to activate the Infoobject's master data (by right-click) I get the following message,
"Lock NOT set for: Loading master data attributes"
And the data is not activated.
Can you please suggest what needs to be done.
Thanks & Regards,
Sumita -
Infocubes are not visible in $INFOCUBE Folder in Universe Designer
Hi, Queries are seen and accessible but Infocubes are not seen $INFOCUBE Folder in Universe designer. Please let me know what might be the problem and please suggest the solution.
Environment: SAP BI 7.1, BO Edge3.0.
Thanks in advance.Hi
When opening BW infocubes from crystal reports we have problem:
In se37 ; we executed BAPI function BAPI_MDPROVIDER_GET_CUBES
- put in as the CATALOG $INFOCUBE.
when we did the above steps. i got this message "201No InfoProvider exists with name "YN_SUBFAM". adn there are around 350 entries.
But infocubes are not visible in $INFOCUBE Folder in the crystal reports. Is it bug? how can we resolve this issue. all infocube are active in rsa1.
Please help us -
Attribute not visible in Query Designer
hi BI Gurus,
I could not see some InfoObjects(Attributes) which are marked Authorization Relevant, in the query designer. And the strange thing is, they are not visible even for the user with SAP_ALL and 0BI_ALL assigned. The authorizations for the cube in which the main char is used looks fine.
I have checked all the options in RSECADMIN, everything looks good.
pls help me in finding the solution..
thanks
Cnu..check out with the info object screen in attribute tab, navigational attribute on/0f switch box, if u r using FF source system.
check out with the infocube whether u r checked the check boxes in navigational attribute tab.
regards
harikrishna.N -
Characteristic not visible in tree?
Hi,
why is it that some times infoobjects are not visible in the tree under the InfoObjects tree in the modeling tab-strib?
None of the characteristics on this system are available, but I can find the infoobjects from transaction RSD1?
I have installed cubes with all before in dataflow and thereby also the infoobjects and the infoareas from business content, but they don't show up in the tree when I switch to modeling.
I can create an InfoObjectCatalog and add the infoobjects, but I would have expected the infoobjects to be available without this manual step.
Have I overlooked something obvious?
Regards,
Christianhey Sree,
If an InfoObject can be seen in RSD1 other than the InfoObjects folder, then you answered
"If you create a $TMP object under a Transportable InfoArea, you will face this problem. Now the only way to reach it is RSD1, assign proper Transport Package to see in under the correct tree."
Could you elaborate it on how to do this step by step? You mean to reassing the InfoArea to a transportable package, but how? I've encountered the same problem.
Thanks in advance!
Message was edited by: Kevin Smith -
DataSource is saved, but not visible in BW under the node NODESNOTCONNECTED
When activating a datasource, I received the following message:
Message no. R8418
Diagnosis
You tried to assign a DataSource to the application component DM. This application component is, however, not entered in the RODSAPPL table as an application component.
System Response
The DataSource is saved, but is not visible in BW under the node NODESNOTCONNECTED.
Does anyone know a work around for this?
Thank you.Hi,
you are missing Application Component Hierarchy in your BW System which is stored in tables called RODSAPPL and RODSAPPLT (for the texts).
First try to replicate the DataSources/Component Hierarchy from the Source System.
Goto RSA1 -> Source Systems -> Replicate DataSources
Goto DataSources again and try to activate.
Take also a look:
534894 - Replication of application components and DataSources to BW
350024 - BW-OLTP-APCO: Frequently asked questions (FAQ)
Hope this helps.
Regards
Andreas -
External hard drive not visible in disk utility or finder
Hi all,
I have had a good look through previous discussions and I can't seem to find an issue relevant to mine.
My external hard drive has 2 partitions (1 time machine back up, 1 general hard drive). The issue is that the HD is running when it is plugged in however it is not visible in either disk utility or finder.
I am running OS X 10.10 (Yosemite) on a 2010 MacBook Pro. I also have parallels desktop running windows 7. When I boot windows and plug in the HD I usually get the option to mount the HD to either OS X or Windows. With this issue the option window appears for a split second (not enough time to select either) and then disappears. It seems that the HD may be ejecting itself as soon as it is registered by the computer. I have tried using a different power cable for the HD and also a different usb cable, this doesn't help.
The external HD is a Samsung D3 Station, which i have had for 6 months now and never had an issue with.
Any help is appreciated
Thanks,
BruceAn update for anyone who can help me:
I have tried the external hard drive in other computers (mac and windows), each time I get the same problem above.
I have removed the HD from the enclosure and purchased a docking station for it (3.5" SATA). When I plug it in to the laptop it disconnects itself straight away before it is visible. With the windows computers it installs the drivers and says that the device is ready to use, then disconnects before it shows up.
As the HD is not visible there is no option to re-format or anything.
This is very frustrating as I was using the HD with no issues and it randomly disconnected and I have not been able to access since.
Thanks in advance for any help.
Bruce
Maybe you are looking for
-
I updated my Mac Book Pro to Yosemite, now it says it's not compatible with my Cannon copier. Any ideas how to fix this problem so I can use my Cannon copier again? Thanks for any help!
-
Request timed out when purchasing music. Fresh install of Win7.
For the past couple months I have have not been able to purchase music off iTunes without first going into Add/Remove programs and doing a "Repair" to iTunes. Windows Firewall wasn't blocking anything from Apple and even with the firewall totally dis
-
If I do an end task on plugin_container using Windows task manager, the typing response problem seems to go away temporarily. However, the plugin_container process soon restarts itself and the typing issue returns. It has happened four or five times
-
"A" is an IT application (name) this IT application has a total of 50 users (Number of Users) . So the Number of users need to be aggregated to the IT application level. This application provides different Applications Functionalities, which belong t
-
If I preorder the iPhone 4s can I wait a month or two to activate it?
My parents want me to wait till Christmas to use it but I want to order it now incase they sell out or something.. can I do that? (I read somewhere I'd be charged the full price of the phone if it isn't activated within 30 days, don't know if it's tr