Not working and light blinks orange?

My Airport Express is connected to powered computer speakers and was able to receive my iTunes over the network.
Now for some reason it is not working and the light is blinking orange?

Hi
Status light blinking amber means:
AirPort Express has completed its start up sequence but has no IP connection (due to out of network range, Ethernet unplugged, no path to Internet or local router, ISP problem, set up as wireless client but not in access control list, etc.)
I would unplug it leave it for a bit then plug it back in. If this doesn't work, then reset it.

Similar Messages

Camera not working and light blinking after upgrade

After upgrading to Mavericks, the built-in camera on my MacBook Air (mid-2013) has stopped working in all applications. When I start an application that uses the camera, the image does not appear, and the camera light blinks rapidly until I close the application. Console shows the following messages:
11/24/13 11:34:08.000 a.m. kernel[0]: AppleCamIn::power_off_hardware
11/24/13 11:34:08.000 a.m. kernel[0]: AppleCamIn::power_on_hardware
11/24/13 11:34:09.000 a.m. kernel[0]: ISPCPU: ERR: ./H4ISPCD/filters/IC/CImageCaptureH4FSM.cpp, 452: FlowIC00: MIPI error (interrupt source = 0x8)
11/24/13 11:34:09.000 a.m. kernel[0]: ISPCPU: ERR: ./H4ISPCD/filters/IC/CImageCaptureH4.cpp, 2503: FlowIC00: Perform error recovery (1).
The latter two messages repeat until I close the application.
This is not the same problem as the Skype camera issue that was resolved with a previous update. I have tried resetting the NVRAM and PMU, reinstalling Mavericks, and using the guest account.
This user has the same issue: https://discussions.apple.com/message/23721483#23721483
Any help would be greatly appreciated — I would really like to have my camera working!

Hello grmurchison,
Thank you for providing the details of the issue you are experiencing with your built-in iSight camera. You have taken some really great steps to isolate and troubleshoot the issue. I found an article with a couple of additional steps (you can skip the steps you have already taken):
Built-in iSight cameras
These steps are for iSight cameras that are built into a computer, such as the iMac G5 (iSight) or later, the MacBook, or MacBook Pro.
See if the issue is application-specific.
Try another application (iSight works with applications like iChat, PhotoBooth, and iMovie HD 6) to see if the iSight camera exhibits the same behavior in all applications. If it only happens in one application, try reinstalling that application.
See if the issue is user-specific.
Test your iSight camera in another user account. If the issue only occurs in one user, the issue would be isolated to user settings.
Find out if the computer recognizes the iSight
Check System Profiler (in the Utilities folder, inside the Applications folder). Under the USB header, check to see if the iSight camera is detected.
Reset SMC or PMU
Reset your computer's SMC or PMU, and then check System Profiler again. (SMC reset instructions for iMac G5 (iSight), Intel-based iMacs; PMU reset instructions for MacBook and MacBook Pro.)
If your built-in iSight camera is still not behaving correctly after trying all these steps, you may need to contact Apple or an Apple-Authorized Service Provider for service.
How to Troubleshoot iSight
http://support.apple.com/kb/ht2090
Thank you for using Apple Support Communities.
Best,
Sheila M.

DV8225nr Mass Storage Controller driver, left mouse not working, and standby blinking light?

Hello!
1. Getting a yellow arrow in Device Manager for Other Devices>Mass Storage Controller. Online HP site scan can't find my computer. When I type model as DV8225nr, it's can't find that either. I need a driver so I can clear this question mark. Properties>Details> Device Instance ID is PCI\VEN_104C&DEV_8033&SUBSYS_309B103C&REV_00/4&13826118&23A4
2. My daughter uses this computer so maybe through some key combination or switch or something (unless it just failed), the left mouse button doesn't work. I have to use a USB optical mouse. Any idea what I can look at to restore full functionality to the mouse/touchpad?
3. At night, I notice that there is a flashing blue light comping from this computer. I think it's when it goes into standby. Any way to stop that flashing?
I appreciate everyone's help!
Regards,
Leaning
This question was solved.
View Solution.

Hi:
You need this driver for that device.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-43235-1&cc=us&dlc=en&lc=en&...
Did you install the touchpad driver?
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-48345-1&cc=us&dlc=en&lc=en&...
If that doesn't work, I don't have any other suggestions for you and I concur with your assumption that it is a hardware problem.
Blinking light? Shut the PC down instead of letting it go into sleep mode.
There are no settings to not have that happen.

Updated to v4.5 now phone not working, red light blinking

K...so I updated to the new software v4.5 on my 8320 curve and now it is not booting up and the red light is blinking twice every few seconds. I have already removed the battery and done everything that I can think of without using JML because I don't want to lose my info....please help...thanks.

I fixed my problem. I found this on the tmobile support site, and it worked after the second try.
Handheld does not turn on and the light flashes
Ensure the handheld is NOT connected to the computer.
In BlackBerry Desktop Manager, open Application Loader and Update Applications.
Remove the battery in the handheld.
Reconnect the handheld to the computer
When the Drop-down list on the Communication Port Selection window changes to USBIN, click Next.Note: If there is no USB option in the drop-down disconnect the device, remove the battery and re-connect the device without the battery.
If the Handheld Password Required dialog box appears, type your password. The Application loader will detect the BlackBerry device.
Proceed with running Application Loader. Allow the Application Loader process to complete; this can take 30 - 45 minutes.Note: If the battery was removed during step 5, make sure it is re-inserted when the Application Loader comes to the Wait For Device Initialization stage.
Do not disconnect the device from the computer until you receive a message your PC, “The loading operation was successful.”

My ipod shuffle 1st generation won't restore. There is an error that reads "The ipod cannot be restored. An unknown error has ocurred (1442)". The lights blink orange and green simultaneously...and it just won't restore. help?

So it's the little thin ipod with no screen...that has the usb thing and the landyard. Whenever I try restoring it it tries to restore and then a message pops up. There is an error that reads "The ipod cannot be restored. An unknown error has ocurred (1442)". The lights blink orange and green simultaneously...and it just won't restore. help?. I have literally tried restoring it like 10 times and nothing happens. When i connect headphones it does not hear and that little light think happens....which i had never seen happen before. I need to fix it. ....please help....if i take it to an apple store....will it cost alot to fix that?

reset utility should help...for mac
http://www.apple.com/support/downloads/ipodresetutility103formac.html
for windows
http://www.apple.com/support/downloads/ipodresetutility104forwindows.html

My computer's power adapter is plugged into a power source, yet the indicator light is not working and my computer is not being charged.

My computer's power adapter is plugged into a power source, yet the indicator light is not working and my computer is not being charged.

I have the same issue.
The magsafe goes orange for about 20 seconds, the battery shows 0% then it goes to a black X indicating no battery installed.
With a new battery the same happens, although it can run on battery but does not charge.
It runs fine on mains power, the green light is always lit.
I have tried several things so far:
1. Cleaned the magsafe contacts on cable and macbook
2. Reset SMC and PRAM
3. Installed latest battery update
4. Tried new battery
5. Put old battery in fridge for an hour
I work in IT and am fairly confident taking it apart, what should I try next?
Some people recommend a new battery connector, which doesn't seem to make sense as the battery has never been removed before. Also some people say it will need a new logic/motherboard.
Any experts here managed to sucessfully fix one of these?

Hp Pavilion Dv 9000 no audio, quick lunch soft touch not working and no light indicators

Good Evening i have problems with my laptop since it was sent to me without a hard disk drive so i have to buy a new one to make it work, first here are some useful information regarding my laptop.
Hp pavilion dv 9000
OS: Windows Vista Home premium
HDD1: 250Gb
Ram: 1030mb
so when i got the hard disk drive, i installed windows vista as its operating system and so far it worked well, and after that i downloaded drivers from HP's website, with correct laptop model and os, i searched for the most compatible drivers that will make my laptop function 100%
i installed
NVIDIA Chipset driver
Hp Quick lunch buttons
Audio Driver
so after the installation and reboot of my laptop, it seems that only NVIDIA chipset driver worked, the quick lunch buttons are still not working, and also i cannot hear anything comming out of my speaker when i try to play some music, but i hear some loud beeps so it means it is 100% functioning and also i noticed the 3 indicators at the bottom lefot of my laptop for (Power,Charging,Reading) lights are not lighting up.
i tried to uninstall it and install it again just like other blogs says but it doesnt work. . .
i really want to make my laptop fully functional . .
can you help me please

Hello @iamDestiny ,
Welcome to the HP Forums!
I understand you've installed a new HDD in your notebook and are unable to use the keyboard shortcuts and have no sound from programs on the computer.
It would help to know if you're using a 32 or 64 bit version of Vista. To see which version of Windows you are using click here: Which Windows operating system am I running?
Keep in mind beeps typically come from the onboard BIOS speaker, not the actual speakers. Can you tell me what you do to hear the beeping so we can tell if this is a system beep or a Windows sound? Also, can you tell me if headphones work?
Regarding drivers: I would suggest installing the HP Support Assistant (HPSA) to search for drivers for you. You can download this here: HP Support Assistant. You can see how to use it here: Using HP Support Assistant (Windows 7, Windows Vista).
When you installed Vista did you use the HP recovery CD's or your own copy of Windows?
Let me know the updated info or if the HPSA works.
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Hello my battery power has a x on it and the lights are not working and its making a noise - Please assist

Hello my battery power has a x on it and the lights are not working and its making a noise - Please assist

The Battery icon with the "X" indicates that your computer does not detect a battery and is operating on electrical power from AC since your computer is plugged in. If your battery is installed but not detected that indicates a problem: 1. the battery is dead; 2. the battery connector is not functioning properly. You mention that there is no response from the indicator lights so it could be either of the two possibilities. The noise is not a good sign. Best to shut it down safely while you can to prevent any possibility of damage and get it to an Apple Genius Bar or Authorized Apple Service Provider to discover the nature of the problem

I have a macbook pro the fan wont stop running the keyboard light is not working and the it wont charge all happened all of a sudden what to do please.

have a macbook pro the fan wont stop running the keyboard light is not working and the it wont charge all happened all of a sudden what to do please.

Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, you may have to take the MBP to the Apple Store to have it checked.
Best

Printer Power button in not working,no light indication

Hi,
HP Deskjet F2400 Series
My Printer Power light is not working, and Indicator lights are also not blinking. but Scanner is working fine. Also an error message showing "Cover is open".but the cover is closed properly. There is a problem with printer.
kindly, provide the solution.
Thanks,

Hi RamyaVemuri,
Welcome to the HP Forums!
I see that your printer power button is not working, and that their is no light indicators.
I think this guide should help. 'The Cover is Open' Message Displays on the Computer.
If that doesn't work, please respond with the type of printer you have as their are multiple Deskjet F2400s. Finding Your HP Product Model Number.
Hope this helps, thank you for posting.
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

My ipod shuffle is not harging. It blinks orange 3 times then stops when I install it

My ipod shuffle is not charging. It blinks orange 3 times then stops when I install it.

According to this article, that means the Shuffle's buttons are disabled.
iPod shuffle (2nd generation): Understanding status light behavior
To re-enable the buttons, press and hold the Play/Pause button for about 3 seconds or until the status light blinks green three times.
B-rock

HT203171 My curser pad is not working and the curser is going crazy. I have tried all of the above but it still does not work

My curser pad is not working and the curser is going crazy. I have tried everything and it still does not work?

I don't know what other solutions you've tried but on mine it was like a "Ghost in the Machine" (moving around and clicking on things on its own) and all I did to fix it was to lightly dampen a cotton ball with window cleaner (evaporates) and clean firmly around the inside edge of the pad and to also click it firmly quickly and many times to clean out ANY kind of dust or debris that has fallen into the cracks. worked GREAT for me , so far!!???

My iphone 4 is not working and I cant reset it from the computer either because it wont connect to it I need help!!!

My iphone 4 is not working and I cant reset it from the computer either because it wont connect to it I need help!!!
1. I tried connecting it to itunes for a system reset and it didnt work.
2. The phone wont even turn on!!!

If the phone wont turn on it sounds like it needs to be charged. Plug it into a charger and wait about 15 minutes and try turning it on while still charging. Have you tried holding in your home button with the on/off button held in? Hold them both together until the apple logo comes up and then release them. The screen will blink off an on while it is resetting. I still think this is a battery issue. Good luck~

When I unplug Apple headphones from my MacBook Pro sond from internal speakers not work, and system soud preferences displayed: Output: optical digital out port only

When I unplug Apple headphones from my MacBook Pro sond from internal speakers not work, and system soud preferences displayed: Output: optical digital out port only

If you see a red light in the audio output port, then the internal switch is stuck. Insert the earphone plug a few times and see if you can trip the switch. If that fails, insert a cocktail stirrer and the like and jiggle it around inside. If that fails, take it to an Apple store and have the technicians at the genius bar do it for you.
Ciao.

Internet not working and printer connected by cable but it is unable to communicate with the compute

Changed print cartridge and then problem started.
Internet not working and printer connected by cable but it is unable to communicate with the computer

Hi Joanna 59
Sorry to hear that you are having this issue and Hope you are well;
1.Do you see any light on the back on the printer where the cable is connected?
2. Do you see lights on the back of the router where the cable that comes from the printer is connected?
3.What type of cable are using to connect the printer? Have you try another cable to see if the problem is the current cable.
Please kindly include;
What router are you using (Brand and model)
Operating system i.e. Win 7
Complete Printer model
Thanks;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Not working and light blinks orange?

Similar Messages

Maybe you are looking for