Not working anything not charging no conection with pc and if call me the tell that i am not answering

Not working anything not charging no conection with pc and if somebody calls me it tells that i am not answering
That thing that just happended whith my iphone and now i can not do anything whith my iphone it just turned off

Yes, you got the phone which was currently eligible for Early Edge at the time. This changes from time to time. When the iPhone 6/6+ was first released those were the ONLY phones you could purchase on Early Edge. This was for September and October of 2014. You would not have been able to purchase any other phone with Early Edge at the time. At the time, this made a lot of android phone owners angry, just as it is making the OP(an iPhone owner) angry now. Then it was the Droid Turbo ONLY, then it was....
One of the requisites AS LISTED ON THE EDGE PAGE is that your line must be eligible for an upgrade. Verizon lifts this requirement IF you want to purchase a specific phone. If the phone you want is not eligible for Early Edge at this moment, it may be at some point in the future and the phone CURRENTLY available may NOT be available for Early Edge. You were able to get the phone you wanted on Early Edge because it was the phone(or one of the phones) eligible at the time for Early Edge.
Verizon does not have a link for Early Edge because it is not always available AND the eligible phones change from time to time. This is no different than any other special they occasionally run.
Regardless, since a link WAS given for Edge which DOES list upgrade eligibility as being a requirement, if someone DOES NOT fulfill that requirement it is not out of the question that other portions of Edge may be different, too, such as what you posted "All Verizon Wireless smartphones, tablets and basic phones are eligible for Verizon Edge." If Verizon relaxes a requirement to enter into Edge, why is it so hard to fathom they may ALSO change something else such as which phones are eligible???
The fact that the OP IS NOT able to purchase an iPhone on Early Edge simply reinforces this fact.

Similar Messages

  • HT2731 I was ask for my secure question and they did not work. So I went into my account and tap on my secure question that I forgot my secure question. It replied back that it just sent me a email. The email never came. I did this three time. My email is

    I was ask for my secure question and they did not work. So I went into my account and tap on my secure question that I forgot my secure question. It replied back that it just sent me a email. The email never came. I did this three time. You have myy email as correct. I have check my account and it show as being correct.

    It's a really bad idea to post your email addresess - it's an invitation to spam - and I've asked the Hosts to remove them.
    This is a user-to-user forum and no-one on here can take any direct action. If your Yahoo address is not working that's something you would need to take up with Yahoo - have you checked it by sending yourself an email to it?
    Otherwise you will need to contact Support: go to https://expresslane.apple.com/ and click on 'iTunes' in the center column and then 'iTunes Store' in the right-hand column and proceed from there.

  • Recently Image Capture does not work.  It can't find one camera and can't find the images from another camera.  Help?

    Recently Image Capture stopped working.  It can't find one camera and can't find the images from a different camera.  Help?

    Launch iPhoto. From the menu: iPhoto>Preferences>General: Select Connecting camera opens>Image Capture.

  • Camera is not working on MacBook Air 6,2 with Bootcamp and Windows 7 Pro 64-bit -- how to fix?

    I have a MacBook Air 6,2 that has been Bootcamp'd with Windows 7 x64 Pro. Everything works find except for the camera, which does not appear to work at all. In the Windows Device Manager it shows the camera as installed with a working driver, but the camera never turns on.
    Any ideas on how to make it work?

    Hi,
    If there is no error after the disk checking, please temporary disable antivirus, update BIOS and device drivers such as hard drive from computer manufacturer’s
    website to check the result.
    If the issue persists, I suggest you boot in Safe Mode, and clear the temp folder. Delete every files that can be deleted.
    C:\Users\%username%\AppData\Local\Temp
    In addition, the following threads would be helpful as well.
    http://social.technet.microsoft.com/Forums/en-US/itprovistaapps/thread/7b64e871-71be-4c5d-a4a3-502744da978b
    http://social.technet.microsoft.com/Forums/en/itprovistaapps/thread/9e5b22f1-8fb3-4d70-8f79-b92c7dc6e840
    Thanks,
    Simida
    Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Time machine was not working.  I bought a new time machine and migrated time machine files to new time capsule; not recognized by yosemite

    Time machine was not working after yosemite upgrade on new and old MacBooks in my house.  I bought a new time machine and migrated time machine files to new time capsule. I changed the names of the older sparse bundles to the default values.  Yosemite still does not recognize them. 

    I presume the bought a time machine means a time capsule.
    How did you migrate the Time Machine files?
    From where? A Time Capsule or external drive?
    It is difficult to get TM working with Yosemite.. since it doesn't work after the upgrade on the old TM backup.. it will not work on the migrated files either.
    You simply start a new backup and store the old backups for a few months until you are ready to dump them.
    The instructions for inheriting old backups is B5 and B6 here.
    http://pondini.org/TM/Troubleshooting.html
    However it is just unlikely to work.. TM in Yosemite is very different. Broken even.
    I also strongly recommend people to use Carbon Copy Cloner or some other 3rd party backup until Apple get the bugs fixed. And after several months.. they are still rampant.

  • I've just upgraded my iPhone 5 with iOS 7. I have the problem that I can not send a photo as a iMessage directly from Photo application. Does anybody know something about that? Thanks!

    I've just upgraded my iPhone 5 with new iOS 7. I noticed that i cannot send a photo as a iMessage directly from Photo application as I could while was on iOS 6. Anybody knows something about this?

    Hi, thanks for the suggestion. I have tried as you suggested, and when opening the "purchased" apps some have the icloud logo next to them, but I only have "OPEN" against "Find My iPhone". When opening it up, it goes through the same routine; needs to be updated before proceeding, and wouldn't update because I don't have IOS8.
    Anything else I could try, or am I doomed!
    All of your help is much appreciated, thanks

  • HT1414 i cant reset my ipad as it says i neeed my password typed in when conecting to itunes and i cant remember the password thats why i am atempting to restore my ipad any help guys???

    i cant restore my ipad because i cant remember my password thats why im trying to restore it any ideas how to get round this

    You will need to restore using Recovery Mode. You can read about it here.
    http://support.apple.com/kb/ht4097
    Or you can follow these instructions.
    Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
    Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
    If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
    While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
    If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
    Use iTunes to restore iPad.

  • Itunes will not respond to my ipod touch, i have re-installed countless times and it still is not working. i have also tried different USB's and nothing. please help!

    Itunes will not respond to my ipod touch, i have re-installed countless times and it still is not working. i have also tried different USB's and nothing. please help!

    - Try here:
    iOS: Device not recognized in iTunes for Windows
    - Next try a different computer to help determine if you have a computer or iPod problem.

  • How can I remove photos from iPhone...when I synced to another computer, it loaded up a ton a pictures from the laptop that I did not want on my phone

    Help!  I have 4 different computers that I plug my iPhone 4 into from time to time.  I just synced it with a laptop that I haven't plugged into for a long while, and it overloaded my phone with a ton of pictures from the computer that I did not want or need on my phone.  When I went to PHOTOS on my iTunes, and checked "sync checked folders only", it says it will replace the photos on my phone.  I'm not sure this is what I want...I don't want to lose the photos on my phone.  I have over 3000 on there!

    You can sync photos and itunes content with one and only one computer at a time.  When you sync to another, it will erase the current content and  replace with content from the new computer.

  • HT203548 I'm having problems with Siri on my iPhone 6.  It worked briefly yesterday and now its not doing anything.  I have turned phone off and on and made sure everything is on in settings.  Please help!

    I'm having problems with Siri on my iPhone 6.  It worked briefly yesterday and now its not doing anything.  I have turned phone off and on and made sure everything is on in settings.  Please help!

    Do you have an active data connection (wifi or cellular)? Have you tried resetting the phone by pressing and holding the Home and power buttons until the apple appears (this is different than just turning it off and back on).

  • Lumia 920 not working after wireless charge

    This is not my phone specifically, it is a family memers phone on my plan. 
    So she has had the phone for a month and from what i know, it worked fine no issues.  ATT forgot to order her a wireless charger so they finally did and used it for the first time last night.  Not sure how long she charged, but after chargine, the phone did not work and she could not boot the phone. 
    I asked her to ry to do a soft reset by holding the volume and middle button, the phone vibrates after 10 seconds, but it shoes a blue screen.  I asked her to do a hard reset wiping everything and starting frrom factory, same thing happens with a blue screen coming on and nothing else. 
    Im not certain if she had the update either, i doubt she has the update.  Is there a way to get this phone up and running or will i have to do a warranty exchange?
    Thanks

    Sounds like you have tried everything, so apart from installing the Portico update that was pushed for AT&T and Rogers devices in the last few days, and checking that she is up-to-date with all the Nokia system app updates in the Store, there is nothing much else that can be done. You most likely will need to take the phone back to the point of purchase and request a replacement, as it sounds it is hardware defective.

  • Just updated to the latest version of itunes and now my iphone won't sync with my email or calender because the apple mobile device is not started. Anyone know any way roudn this - Apple wish to charge me to fix this. not impressed

    just updated to the latest version of itunes and now my iphone won't sync with my email or calender because the apple mobile device is not started. Anyone know any way roudn this - Apple wish to charge me to fix this. not impressed

    It is working now. I no longer get the message about the item not being available in the US and I can access the store.

  • With IOS6 3G does not work.  This has already happened with IOS5.1, was only solved with IOS5.1.1.  More anyone have this problem? How do you solve?

    With IOS6 3G does not work.
    This has already happened with IOS5.1, was only solved with IOS5.1.1.
    More anyone have this problem? How do you solve?

    This response is a little late as I just read about your problem. I have a 2012 Dodge Charger and a 2012 Chrysler Town and Country and both worked flawlessly with the iPhone 5s my wife and I had. However, we just upgraded to the iPhone 6 and Uconnect will receive calls but you cannot answer them. You can callout successfully, however. the annoyance being the inability to answer incoming calls in the HandsFree mode.

  • I am having problem with me Iphone4, looks like the mic of my phone is not working. no one can hear me if I make a call to them

    Can any one please help me I am having problem with me Iphone4, looks like the mic of my phone is not working. no one can hear me if I make a call to them. I have tried all restoring options but no use. please help me

    The mic on my iPhone4 has just quit also. Similar symptoms to yours in that people I'm talking to hear only static or my voice very faintly. The voice/memo recorder also only really records static.
    It happened suddenly and seemed to get better after a day or two but then went completely after another day.
    I'm returning it to Vodafone New Zealand shortly but will have to wait 5-10 days for a replacement. There are NO Apple accredited means to speed this procedure up in NZ.
    We don't even have a single physical Apple Store where you could walk in and talk to a Genius.

  • I am running an Apple imac G-5 with OS 10.5.8. I am getting the message that my version of Safari is no longer working. I downloaded a newer version of Safari and I got the message that it would not work with my OS 10.5.8. Does any one have a suggest

    I am running an Apple imac G-5 with OS 10.5.8. Processor: 2 GHz. Memory: 2 GB DDR SDRAM.  I am getting the message that my version of Safari is no longer working. I downloaded a newer version of Safari and I got the message that it would not work with my OS 10.5.8. Does any one have a suggest

    Your post somehow found its way to a little-viewed forum for an obsolete Apple productivity program. I have asked the Hosts to move you to a more active and appropriate forum for your product.

Maybe you are looking for

  • Multiple Headphone / Monitor Mix

    Just wondering how to get multiple headphone mixes? Running 2 (soon to be 3) daisyied FirePod's. They each have what seems to be 8 ins and 2 outs. I'd like to be able to give a separate mix for each output (like a soundboard with 4+ monitor knobs on

  • Reversal of VAT at the time of allowing cash discount for incoming payment.

    Hi Gurus, Please guide me for the following scenario. Invoice posted for comp code from SD. Sale value = 100 Vat = 20 (20%) Customer to Pay =120. Cash discount will be 10% if paid with in 15days. Invoice on 1st May 2011 Entry At invoice Customer     

  • Mac Mini Server (2010) & Windows Server 2008

    Hi, Would it be possible to boot, install and run Windows Server 2008 on the Mac Mini Server, replacing Snow Leopard Server OS? I assume I need the SuperDrive or similar DVD drive to realize this scenario. Regards, sb

  • Material Reservation Create Upon Saving Work Order

    Dear Experts, We have a requirement that material reservation needs to be created upon release of the PM order. However in SAP standard it is created upon saving the PM order. Do you know the way how to change it that reservation will be created upon

  • Validate ship to party- VA01 at header level

    I am adding some validation logic to userexit routime USEREXIT_MOVE_FIELD_TO_VBKD in MV45AFZZ. While testing, I have noticed that while entering the ship to party in the screen (VA01) in VBAK  i could not able to find ship to party. But i can see sol