Not working correctly, not connecting to ford sync since 3.1.2

I have a first gen ipod touch and ever since I downloaded 3.1.2, i get a messed up screen sometimes while playing music and my ipod will not connect to my sync in my edge anymore. any tips?

Apparently this is a problem with the iPhone 3.1 OS not working with Ford Sync. I have a Ford Fusion and I have had problems ever since updating my iPhone to 3.0.
From Ford:
If your device has been updated to Apple firmware version 3.1 (or greater), then you will experience an INDEXING concern which may limit functionality of the device with SYNC, including longer indexing times (e.g., 30 minutes). Note: Earlier versions of the iPhone firmware are not affected. The Ford SYNC Team is aware and has been in communication with the Apple team regarding the concern. We will post an updated response once more information is known. We appreciate your patience and would like to offer the following recommendations for continued usage of SYNC and your device:
-Use the AutoPlay feature. SYNC will still playback content on the device that is on the "Now Playing" list of the device. Media control will be limited to the Play, Pause, Next and Previous Track.
-If the device supports Bluetooth Audio, connect to the device with SYNC BT Audio/Media Stream. Media control will be limited to Play, Pause, but can also be controlled directly on the device.
-Use the Line In input to connect to the device headphone audio jack. The media will need to be controlled on the device directly.
-Transfer unprotected contents to a USB flash drive. SYNC supports playback with full media control of iTunes formatted unprotected media.
-Allow some additional time for the device to index.
If you have any additional questions, you may also contact our SYNC Support team via chat, e-mail, or phone. Thanks.
Source:
http://boards.synccommunity.com/n/pfx/forum.aspx?tsn=1&nav=messages&webtag=fords yncmb&tid=1987

Similar Messages

  • The calendar sync is recently not working correctly, not display "All events" but it only displays the last six months for my individual entries. My repeating entires do go back further, though. How do I fix?

    I have an iPad 5.1.1. The calendar sync has started to not work correctly. I have it checked "All events," but it only displays the last two months for my individual entries. My repeating entires do go back further, though. How do I fix?

    HI Jason269. Thanks for your reply, however I wrote that I already have "All events" checked. If All Events is checked and it doesn't diaplay all events, how do I fix? It seems this is a common issue, as I have read many others on here state the same problem.
    I believe my problem occurred when I synced my iMac calendar to my iPad calendar using yahoo. Yesterday, I unsynced them on my iMac controls. When I checked my iPad calendar, all of my old entries reappeared - but only for five seconds and disappeared again. So, the data is saved and still there but cannot be displayed, even when I have All events checked. In fact, it only shows my individual entries for the last two months, but does show all my recurring entries. If I switched to last six months, I will see everything for the last six months. If I switch back to all events, it is only for the last two months.
    As I mentioned, others on here have expressed exactly the same issue, including the two month example and having used yahoo.
    For legal purposes, I need to be able to use the information from my indidual calendar entries in an upcoming court case. So I really need to fix this ASAP!

  • Ipod not working correctly, not frozen, nothing on it.

    My ipod was connected to this ipod dock and all of the things on my ipod were completely erased, pictures, songs, everything. Since then it has been not working properly. When i try to update my ipod i wont let me. iTunes keeps giving me this message that says that i have to restore my ipod back to factory settings. I dont know how to do that. The ipod shows up on my computer desktop but not in Itunes. Also when i connect it to the computer the "do not dissconect" sign shows and does not go away.
    also i was wondering does apple have an Email where I could Email them abut my ipod trouble or do i have to call the number?
    what do i do? thankyou so much for taking the time to help me out.

    Check out these troubleshooting guides.
    Restoring your iPod.
    iPod does not appear in iTunes (Mac).
    If you have your iPod set to automatically transfer songs, right click on the iPod in iTunes, select options and if you have a check mark in the box marked “enable disk use”, remove it and your iPod should automatically disconnect after it’s finished transferring music. If it's set for manual transfer of songs, then you have to manually disconnect the iPod. You can just right click on it and select eject, or just drag it to the trash.
    There is no email for tech support, only telephone support. Unless you have AppleCare, it's only one support issue that's free, and within the first 90 days of purchase.
    This explains.
    Complimentary support.
    Mac Mini Super Drive; 1GB RAM; 20 Cinema Display; Airport Extreme; Maxtor 250GB ext hd   Mac OS X (10.4.3)   iPod 60GB (video); iPod 60GB (colour); 4GB nano.

  • Freebusy lookups via OWA not working correctly (notes coexistence)

    Hi,
    We're performing a migration from notes to exchange 2013, and are currently using contacts for the resource mailboxes that are still in notes.
    When looking up freebusy information via outlook, all is ok, but when we query the rooms (contacts) via OWA, we get the status unavailable.
    It looks like a timeout, since querying the freebusy is being performed correctly (quest coex freebusy server).
    If I'm correct there was a timeout that can be configured for crossforest ews lookups in earlier exchange versions.
    Is this still the case in Exchange 2013 CU3? And if so, where can I configure it?

    Hi,
    I recommend that you refer to the following methods to troubleshoot the issue:
    1.Please run EXRCA to check the availability information.
    https://testconnectivity.microsoft.com/
    2.Exchange Web Services is used to retrieve the availability information, you can use Internet Explorer to verify that we have access to the Highlighted URL from below:
    In addition, here is a similar thread for your reference:
    Booking room shows "No Information" Status in OWA
    Hope this helps!
    Thanks.
    Niko Cheng
    TechNet Community Support

  • Activity Monitor not working correctly / not listing processes

    When I open Activity Monitor, it does not display a list of processes. The CPU usage works in the bottom of the window as does the disk usage. None of the other graphs display any graphing/data.
    I have rebooted, relaunched AM and I selected "all processes" but it still doesn't show processes.
    I used the terminal command "top" and can see processes in the terminal window.
    thanks for any assistance,
    Harold
    imac 2.8 dual core/24"/2gb/os10.5.5

    Thanks for the quick reply. I couldn't find the activity monitor preferences file you specified, in the Preferences directory. Here's what I've done: I rebooted from an older backup image on my external drive that I made using superduper. The activity monitor app worked from this disk image. I copied the AM app into my current drive, where it showed as a copy.
    I rebooted, and attempted to use this copy. It wouldn't let me due to file permissions problems of some sort. I opened the current version of AM and now it works.
    I'm not sure what fixed the problem, but Activity Monitory now seems to be working OK.
    thanks,
    Harold

  • Superdrive not working correctly (not reading CD-Roms)

    Since installing Snow Leopard last year, I have found that my intel iMac no longer reads CD-Roms (commercial music CDs). It will still read/write to DVD-Rs, read and play DVDs, read/write to CD-Rs. Any ideas? I'm not fond of spending $200+ for a new internal Superdrive, when I can pick up a new slimline DVD read/write combo unit for $30.....

    Mariamne,
    The plot unfolds... Look for any copy-protection notices on the faces of your problematic commercial discs. If you find any, stop here and post back. If you don't, please continue.
    Load a problematic original commercial CD into the optical drive. Once it mounts, check the file sizes of the individual tracks, which should be somewhere in the range of 30-50 MB per file. Do this via a Finder window. (You won't be able to view the file sizes via iTunes unless you first import the files.) If the sizes are in this range, then continue. If not, stop and post back.
    Launch iTunes and from the iTunes menubar, choose iTunes>Preferences. Click on the Advanced tab in the preferences window and then click on Importing. Make note of your preferred import setting so you can reset it again later. There select Import Using AIFF Encoder and check the four boxes below. Next click on the Burning tab and select the Audio CD burn option. Click Okay to close the window and then import the CD. The imported file sizes in iTunes should match the CD file sizes of the original disc. if they do, please continue. If not, stop and post back.
    Attempt to play the imported files with iTunes. If successful, eject the original CD and attempt to burn a blank CD. Check play on the burned CD once it mounts to the desktop, using iTunes.
    Please post back with your results.
    Gary
    ps: What type of computer are you dealing with here? Is it a Powermac G4 or an Intel iMac?

  • SUM function not working correctly (not a rounding issue)

    OK.
    So in the E-column, I have a list of statistics going from E4 through E11. E12 is supposed to give the sum of the preceding numbers within that range.
             E
    4     34000
    5      7000
    6      7000
    7    30500
    8      7000
    9      3000
    10          0
    11    1500
    The sum of these numbers should appear in the next row, E12, where I have the formula: "SUM E4:E11". However, whereas E12 should be giving me $91,000, it's instead giving me $57000. There's nothing that I can see that is wrong with my formula. If I modify one of the cell amounts, the 57000 will change by the amount I changed the cell. But there's no reason on earth it should be giving me 57000. I thought maybe there is an issue with how large a cell number can be, but if I change the 0 to a 1 in E10, it outputs 57001 to E12.

    I cannot confirm your problem.
    When I add: "34000+7000+7000+30500+7000+3000+1500" in the spotlight (top right of the menu bar),  the total of is 90,000
    Using Numbers, I also get 90,000
    =SUM(E1:E8)
    There is something wrong with your data.
    Please post a screenshot

  • Exchange 2013 - 2007 coexistence - activesync 2007 does not work correctly

    Exchange 2013 SP1.  On going Saga-  Last night we cut over to full co-existence with DNS changes for use of legacy namespace and had to roll back again. We had only two issues but one was considered a show stopper.
    The main issue was that Active Sync would not work correctly for 2007 users. It failed the exchange connectivity test and would only work on a device if the domain was entered - or if the legacy namespace was entered manually. That would have meant
    chaos for several thousand users so we rolled back. (It worked perfectly for 2013 users).
    The error given by the test was "foldersync failed" when I drilled down into the detail. It found autodiscover but failed after the initial handshake. (All other tests passed for 2007 and 2013 users)
    We tried:
    1. Populating both Autodisover internal and external urls with the legacy namespace
    2. Populating only the internal url and leaving the external blank (both 1 and 2 had the same result)
    3. Leaving both URLs blank to force 2013 to proxy to the 2007 cas (totally broke it- would not resolve at all)
    I don't know if this is related but SSO is failing for 2007 OWA - two prompts.
    Environment notes- all internal co-existence is working and the internal LTM F5's are working. Externally we use 2 GTM F5 to the LTM f5's to Ex2013. 2007 has SSL being passed through all the way to the CAS. Servers are split into CAS and MBX over 2 DC's.
    Everything else externally was working when we cut over.
    any and all help appreciated
    Tony

    Hi,
    Glad to know that you have found the solution.
    Thanks for your generous sharing.
    Have a nice day : )
    Thanks
    Mavis
    Mavis Huang
    TechNet Community Support

  • ITunes not Working Correctly

    When I use iTunes without connecting my iPhone, it seems OK. When I connect the iPhone, after the sync has been performed, I get a message that my iTunes is not working correctly and has to be closed. Is anyone else having this problem or know how to address it.
    Thanks.

    Thanks. Before I saw your reply, I shut down my iPhone fully, restarted it (I had to reset the defaults) and reconnected. The problem did not reoccur. It also seemed to correct a problem I was having the "weather" function on my iPhone. Thanks again.

  • Itunes just asked me to do another update yesterday. But it's still not working. when ever i try to sync music to my ipod touch it keeps saying itunes is not responding and it freezes. Itunes please fix this problem!!!!!:-(

    Itunes still is not working correctly. There was a software update that i received yesterday and i figured it would fix the problem with itunes not responding, but it didn't. It's still doing the same thing. I'm getting kinda annoyed cause i use itunes as my main music player so please help me fix this software issue thanks!

    Hi Batman1981,
    It sounds like you may be describing an issue where a program that monitors the Winsock protocol for Windows is conflicting with iTunes and it's related components. Take a look at the article linked below, it provides suggestions that may resolve the issue.
    Apple software on Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/ts4123
    You may notice the following symptoms on your Windows PC after installing the iCloud Control Panel, iTunes 10.5 or later, or Safari 5.1 or later:
    iTunes is slow to respond.
    Windows is slow to respond.
    iTunes stops responding when backing up or syncing with an iPhone, iPad, or iPod touch.
    -Jason

  • Function keys are not working correctly

    I've been looking all over the various threads and I can't find an answer that solves my problem.
    Here are the details:
    I bought the computer in the U.S. where I live.
    I have a iMac 2.4GHz intel Core 2 Duo  EMC 2133 with a 20" screen. Bought it new in February 2008.
    I have Mac OS X 10.5.8  (I am waiting for my order for OS Snow Leopard to come in!!)
    I have been using a wireless mouse and Keyboard (Love not having cords!)
    Recently, my wireless keyboard got a short and quit working. I went down to the apple store and got a new wireless keyboard.
    I had the computer with me at the genius bar so, yes, the apple employee saw exactly what I have.
    I took it all home got the thing all put back together and got the new keyboard paired up and working with the computer.
    Here are the problems:
    Went to go use the function keys while using iTunes and found they weren't working properly. The F10, F11 and F12 do not control the volume of sound as the keyboard indicates they would, they instead activate dashboard, spaces, and application windows. 
    Following the advice of other threads, I looked over in the system preferences and made sure the "Use all F1, F2 etc." box was unchecked (it was unchecked), things still didn't work.
    I tried the fn key but it appears to not work at all it has no effect on the functioning of the function keys.
    I went under keyboard shortcuts in system preferences and found the F10, F11 and F12 keys, it confirms that those keys control spaces, dashboard and application windows as they are performing but shows no options to either reassign to volume control (as marked on the keyboard) or make the fn key work.
    I've gone back and forth trying various combinations of checked and unchecked boxes to see if anything would work, so far I've come up with nothing.
    A couple more important or interesting facts:
    Yes I have turned off and taken the batteries out of the old keyboard. My bluetooth connection currently shows it as disconnected.
    I have restarted the computer.
    One thing I find odd; when I go under preferences and go to Keyboard and Mouse when I go under the section "Bluetooth" it shows Bluetooth mouse with the name of the mouse and the battery level. BUT nothing is showing up under bluetooth Keyboard, I can't figure out how to change this and don't know if it is contributing to the problem.
    When I go under the bluetooth logo on the top bar I find the mouse and both keyboards referenced, the old keyboard is shown as disconnected and the other two are connected. I have tried to update the device's name but it doesn't seem to let me.
    I have double clicked on the device under bluetooth and it shows the new keyboard as discoverable, paired and connected. Hence, I am using the new keyboard to write this inquiry.
    Please, any assistance would be of great help. I have tried to be thorough in order help narrow the possible problem. Thanks!!

    Hendry
    Just thought I'd let you know.  Our suspicions were correct, it was the OS. After I installed Snow Leopard (10.6.8) all the problems were corrected.  I also updated the RAM from 1 gb to 6 gb. The mac is working all around better. Sorry it took so long to get back to everyone. My superdrive had pooped out. Rather than replace it I got an external drive from OWC connected with firewire 800.  So far everything is running very well, as far as I can tell this external drive is better than the original superdrive. My superdrive has always acted funny, infact I returned the first mac I got after a week because its superdrive was also malfunctioning. Anyway, all that to say everything seems to be fully functioning again.
    Roy
    Re: Function keys are not working correctly 

  • LaserJet Pr0 200 color MFP M276nw Touch Screen not Working correctly

    Hello, I'm having an issue with a LaserJet Pr0 200 color MFP M276nw Touch Screen not Working correctly. I have followed the instructions to reset the printer, but now am unable to select 'English' as my language because every time I select the 'English' option 'Spanish' is selected. I am then given two options to select 'Si' or 'No' both of which can not be selected on the touch screen?
    Anybody know of a way round this?

    Hi @dnhowes ,
    I see that you are having issues with the touch screen not working correctly. I will do my best to help you.
    Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
    Was it the Nvram reset back to factory settings that you tried or a hard reset?
    Try selecting the option on the display a little higher above the icon to see if that helps. Some touch screens are finicky.
    I find that on the Lab printers when I am selecting different menus.
    If the issue continues, please call our technical support at 800-474-6836 for further assistance. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • System Update not working correctly

    Hi forum,
    System Update (Version 4.00.0024) is not working correctly on my T500 with Windows 7.
    1: Not detecting old versions
    SU is not detecting, that there is an old version of Access Connection (5.42) installed although there is a new version 5.50 avaliable. I had to do a manual update.
    2: Not installing a suggested update
    Each time I run SU, I get a suggested update for "Fix for Issue of HDD with HDP Detection for Windows Vista/7". After downloading there comes a meaningless message "package was not installed" (Paket wurde nicht installiert). No hint for any error.
    3: Some drivers (e.g. for the ultranav) have not been downloaded at all - I had to test the functions of some hardware components and download the appropriate drivers manually in case of malfuncion.
    Probably there is a solution known within the forum community, at least this should be a message to lenovo (I received no response from the help desk when reporting this finding).
    Regards
    AH_DE

    Dear Herik,
    thanks for your answer.
    I checked the log  file and found thousands of entries. Here are the lines related to "Fix for ...".
    Info    2010-02-03 , 08:40:37
              bei Tvsu.Gui.CustomComponents.UpdatePanel.SynchronizeBoxPackage(Object sender, EventArgs args)
              Message: Selected to install: Fix for Issue of HDD with HDP Detection for Windows Vista/7, with
    Info    2010-02-03 , 08:40:43
              bei Tvsu.Coreq.LoadCoreqsProcessor.ProcessUpdatesImplementation(Update[] ups)
              Message: Candidate list:
    Fix for Issue of HDD with HDP Detection for Windows Vista/7[reboot type 3]
    Info    2010-02-03 , 08:40:57
              bei Tvsu.GenericPackageInstaller.GenericPackageInstaller.ExtractFiles(String extractCommand)
              Message: osfq03ww.exe -s -ex -fC:\SWTOOLS\OSFIXES Extract command was executed sucessfully in Fix for Issue of HDD with HDP Detection for Windows Vista/7 update
    Info    2010-02-03 , 08:40:57
              bei Tvsu.GenericPackageInstaller.CmdInstaller.InstallUpdate()
              Message: Update Fix for Issue of HDD with HDP Detection for Windows Vista/7 is being install using Windows Service
    Info    2010-02-03 , 08:40:57
              bei Tvsu.Engine.Process.PackageInstallerProcess.InstallNewUpdates()
              Message: Update Fix for Issue of HDD with HDP Detection for Windows Vista/7 installation failed
    ADDITIONAL ENTRIES 
    Info    2010-02-03 , 08:40:57
              bei Tvsu.Gui.FlowScreens.Results.AdjustComponent()
              Message: System updated:
              Installed=0
              Not Installed=Tvsu.Beans.Update[]
              Deferred=0
              Download Failed=0
              Hidden=0
    Severe          2010-02-03 , 08:41:17
              bei Tvsu.Sdk.SuSdk.ShutDownApplication()
              Message: Has happened an exception while the UNCAuthenticator.Shutdown() was executedShare name can not be null or empty
    Since I'm a normal user only, I can't interprete this information. Do you know what to do?
    Kind Regards
    AH_DE

  • My pc has a virus I just downloaded song from pc to kids ipods now both ipods are not working correctly could the virus be in the ipods,  if not why are both not working doing the same thing right after unplugging from pc.

    Can an ipod get a virus from a pc that has a virus.  After connecting two different ipods to my pc to download music they both are not working correctly, could the virus have transferred to the ipod,  if not why would both ipods not work and be doing the same thing?  When trying to click on a game it just stays on the main screen.

    - I have not heard of a virus that can cause problem with an iDvice that has not been jailbroken.
    - Try resetting the iPods. nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Do you hve problems with one game? The same game on both iPods?
    Other apps?

  • 10.9.2 Mail not working correctly

    I'm the only person in the office to upgrade to 10.9.2 (thankfully!). Since then, Mail has not worked correctly. It is an IMAP account.
    When I click on an existing message in my inbox, instead of displaying instantly it takes 3-4 seconds. The screen scrolls light grey, dark grey, light grey, dark grey then the message. I can live with this but it's very annoying.
    But worse, I now cannot perform any mail searches to refer back to existing messages I have in any of my mailboxes. Search functions 'to, 'from' 'entire message', 'any' do not  work. Even if the message or sender is in the inbox, it can’t find it. This is serious as I'm constantly using this function.
    Many thanks if you can help.
    Simon

    My wife is having the exact same problem all of a sudden with gmail on her MacBook Air. Also running 10.9.2. Everything is running perfectly on the iPhone, but on the Mac, no new email is downloading and the inbox is not syncing.
    Hoping someone can help. Thanks!

Maybe you are looking for