Not working...imagenomic plug in & adobe cc :(

I've tried to download imagenomic portraiture plug in but it's not showing up in photoshop. Please help.

Windows 8 and Photoshop CC are new,does the User Guide says it supports that software?
These are the installation instructions for windows. If Photoshop CC was not listed,you may have to manually add the plug-in.
http://www.imagenomic.com/howtoinstallwin.aspx

Similar Messages

My iPad 2 charger is not working when plugged to a wall..but when plugged to a computer...it says unknown device...what's happening and how do I fix this problem?!

My iPad 2 charger is not working when plugged to a wall..but when plugged to a computer...it says unknown device...what's happening and how do I fix this problem?!

Have you recharge your iPod for at least 2 hours, preferably till the Full charge Battery symbol comes ON.?
See this Apple support Article
http://www.apple.com/support/ipod/five_rs/classic/
You did not by chance bought the Hello Kitty special edition?
Have nice day!

I am having trouble printing a PDF document. Whenever I click print nothing happens but when I am printing documents from Word, Excel etc they print without a problem. I've tried printing as image but that did not work. I uninstalled Adobe Reader XI and d

I am having trouble printing a PDF document. Whenever I click print nothing happens but when I am printing documents from Word, Excel etc they print without a problem. I've tried printing as image but that did not work. I uninstalled Adobe Reader XI and downloaded Adobe Reader X instead and that still doesn't work. I have Windows 7.

Hello,
Please follow the link to troubleshoot the printing issues with Adobe Reader:- Troubleshoot PDF printing | Acrobat, Reader.
Regards,
Nakul

HEADPHONES do not work when plugged in - iMac Intel

So I reinstalled the operating system a few months back. After completing this my headphones do not work when plugged in. I do have them plugged into the correct jack. When i plug them in the built-in speakers go silent for a second or two as if the headphones are working but then the speakers kick back in with no sound in the headphones.
The headphones worked just prior to reinstall so I'm not sure its the jack itself but something in the operating system.
I have also checked in System Preferences 'Sound' and when they are plugged in, they do not show in the devices window.
What the heck is going on? I've read in other forums that this seems to be something of a typical problem but have not found a solution to the problem.
thanks in advance for your help.
Message was edited by: ikuchyacokov

Welcome to the discussions.
Mate, it sounds more like a system glitch than a hardware issue. I too have been experiences some 'funky' issues. However, they have all been fixed by running Onyx disc maintenance software. Install Onyx and run 'automation'. You can cancel the disc checking operations on start up and ignore the back up disclaimer. Give it a go and post back with the results.
Onyx - http://www.titanium.free.fr/download.php?sid=6d79ad9269e8f01484b51a1056277186
Make sure you get the right version for your OS.

Why is Adobe SendNow not working anymore (after using Adobe Send)?

Why is Adobe SendNow not working anymore (after using Adobe Send)?
Can this be fixed?

We are concerned that you did not have a positive experience with Adobe Send. Can you share more information about your workflow so we can try to diagnose the problem?
If you can provide some context on whether you were using the Adobe Send website or the integration with Adobe Reader? Can you share some details on the types of files and approximate sizes you were trying to send to your clients?

Buttons not working when implimented using Adobe Configurator

Hi there, i recently learned about a new program called Adobe Configurator, which allows you to build your own custom panels for Photoshop. The program is brilliant, a brilliant idea, and all seems to work perfectly. However, its connection to Photoshop in only two buttons that i have tried to use, seems to fail.
I set up two of my custom buttons to follow the path of "File > Share My Screen...", and the other to follow the path of "File > Device Central...". However, weather i have a document opened or not, these buttons never work. I get the error message saying "The command "Select" is not currently avalible.". It says this with other buttons, but only when there is nothing open, so it is understandable. So do these buttons just not work, or am i doing it wrong?
Thanks.

That's a limitation of many PDF readers on the iPad. They don't support interactivity well. There are a few that do. Here's a posting on InDesignSecrets.com that I did on the subject of differences between PDF readers:
http://indesignsecrets.com/finding-the-best-tablet-pdf-reader.php
My favorite is PDF Expert. However, I later found I had to outline the type if I used them in an InDesign-created button.

Adobe Reader does not work-how to use adobe reader on Lion

I was trying to print an international label on eBay via Adobe Reader, and was very dissapointed and shocked that it does not work on Lion.
I was so happy that I figured out how to use adobe reader on Lion, and hope I can help anyone else who is frusterated too.
Step 1. Download Google Chrome
Step 2. Printe your international label, or whatever you need to do that uses Adobe Reader

Thanks Shelly! I too was having trouble and thought it was something wrong with my Mac. I still have a big though. When I try to print the saved pdf file, I get a pop-up that says "The document could not be printed. There are no selected pages to print" even though I am looking at the complete doc. It's there and in my print prompt "all pages" are selected to print. The way I got around this, is by emailing the pdf file to a gmail address and viewing the attachment via Google Docs. It loads perfectly and prints without a problem.
Carla

External headphones not working (unless plugged in at boot up)

Hello,
I have a MBP 1st gen unibody running 10.5.7. However in last few days my headphones are not working when i plug them in. When i got into system pref-sound it still shows as internal speakers... this is where it goes weird tho: If i boot the machine up with the headphones in, they work fine and system prefs show them as headphones. But as soon as i unplug them and plug them back in, the machine doesn't recognize them anymore.
I have done the following with no luck:
Repaired permissions
Reset PRAM
Created new user account
Tried another set of headphones
Reinstalled quicktime
Restored system from time machine backup
Did a full archive and install and tried it under 10.5.5 and was same then later did all the updates, still same.
I think i covered the basics.. its just weird it works when leaving headphones in on bootup then afterwards stops if i take them out and back in. I have booked an appointment at a genius bar but wonder is there anything ive missed before i go....
Any help, tips or tricks will be appreciated.

Hey!
I'm having the exact same problem. Just bought a new MBP 13 inch with Snow Leopard already installed. I toggle a lot between having external speakers or headphones plugged into audio output. It was working fine for about the first week with the computer, but just started having the problem you describe-- not recognizing an external audio device plugged in unless I restart/put computer to sleep. Any solutions yet?
Thanks!
Kyle

Nano will not work unless plugged in

Hello.
I have searched through the help section and through the forums, but I can not seem to crack this problem.
My inlaws told me there iPod nano would not work anymore. They simply told me that they could not get it to come on. I thought I could fix it rather easy. Turns out that it isn't that easy.
The nano will only work when I have it plugged up. It says it is fully charged. When I unplug the nano, the screen dims out for a second and then goes to gray as if it were off. I can not get it to come back on however. When it is plugged in, I can navigate through the nano as if there are no problems. As soon as it is unplugged however it acts dead.
Any suggestions? I've tried resetting. Doesn't work unless plugged in...and didn't solve the problem. I've done the five r's. No problems with the hold button...
I am lost on this one guys.

I would say that it's a dud battery.
You can arrange online service here.
Service request.
Or if an Apple store is near you, take it there and have them check your iPod.

Ipad air 2 touch id not working when plugged in

A very strange problem tonight.
After work, I grabbed my iPad Air 2 which was plugged in to the Apple Charger next to my chair. Touched the home button to open it - nothing happened. Tried again. Nothing happened. Entered the code and the IPad Air opened.
After dinner, same thing. Touch ID did not work with any of 3 fingers. With the code - it opened. So, I decided to delete and redo the finger scans. Turned off - no change - Touch ID not working.
To get a better grip, I unplugged the Apple charger. Viola! Touch ID worked. Plugged it back in. Touch ID stops working.
Powder off, power on. Touch ID works unplugged but not plugged in. I have done the Reset All Settings. No change.
At a loss. This is not a 3rd party charger - it is the Apple one that came with the iPad Air. Anyone got any ideas?
Tim

Make sure the usb wall adapter is from Apple too.
if your using a generic wall adapter and original Apple lightning cable,
the touch ID won't work.
IF you use both apple wall adapter and lightning cable
the touch id should work.
hopes this helps

Macbook air not working unless plugged in?

I have a mid 2011 macbook air and it has had an issue of not working unless it was plugged in but mainly only working for a short about of time and then turning off suddenly and not turning back on unless pluged in or decreasing in power extremely and abnormally quickly. It happend a few times last year and twice i took it to a specialist specified by apple and twice i took it home with them having done nothing to it. They stated that there was nothing that the diognostics could see that was wrong with it. Eventually it fixed the problem itself and worked fine. just as long as i never ran it flat it worked fine. untill the other month i did that and now it will not work at all without being pluged into a power source. it has been plugged in all day whilst i have been using it and has not reach 100 per cent of power, it will not pass 98%. If the power cord accidentally falls out it turns of straight away, doesnt shut down just abruptly powers off. Never before has it been this bad. I have noticed it has also in this time it hasnt been working again its also been running noticably slower than usual. But that may just be me being parnoid. Im sick of taking it to get fixed only for them to tell me there is nothing wrong, because evidently there is. What options do i have? i just seriously need it fixed.

Your charger might be bad. If you have access to another charger, then try that one. If you dont have access, either find someone who does, or go to the Apple Store and purchase a new one. If the computer is still under warranty, take the computer AND the adapter and have them looked at.

Touch Screen not working when plugged in via usb to laptop

I am hoping someone can help me figure out what to do because I have run out of ideas... When I plug the phone into my laptop via the USB cable provided with the phone (2006 Dell 1710 Inspiron, Windows Vista) the touch screen does not work. The phone is functioning but I just can't use the touch screen to do anything, more specifically, I want to connect as a mass storage device so I can transfer files, music, pictures, etc.
I have downloaded the drives, installed and reinstalled the drivers, soft rest, used all 5 USB ports on the laptop and made sure the ports were up to date for drivers and software on the laptop. Still the screen won't work when plugged in.
My next step was to try it on a different computer so I used an HP desktop running Windows 7. Downloaded the drivers when prompted and low and behold the screen worked just fine when plugged in. It also works when plugged into my computer at work.
Considering the phone works fine on another computer I am guessing it might be the USB ports on my laptop or the software associated with it.
If anyone can help I would greatly appreciate it. Thank you!

I would definitely agree with you, Funkytown. If we know the phone works properly with two other computers and you've run through all the troubleshooting (awesome job!), then we can determine there is something with the computer that is causing the issue.
Thank you!

Macbook pro ipod nano does not work after plugging in

I plugged in an iPod nano to my MacBook Pro which has two operating systems, one is OS and the other is Windows. I don't know which generation the iPod nano is. The PC side of the MacBook Pro is working but the OS side is not working. It allows me to login and then shows a blank white screen with the pointer cursor.
The iPod nano was plugged in to add music from iTunes. I plugged it in, opened iTunes, and the iPod nano was not recognized on iTunes or on the computer in Finder. I unplugged the iPod nano and closed iTunes. When I opened iTunes again, it gave me an error and will not open iTunes again. I restarted the computer and this is when the OS side stopped working and the PC side continued to work. I was able to load OS in Safe Mode though.
Does anyone have any suggestions? Please help. Thanks!

I had the same issue...of course i went swimming with my iPod but still. If it is the battery that is giving you trouble then go back to your local apple store or call them. Ask what the most reliable place for iPod repair is. A second option (what I did) is to go into the iPod recycle program. They take your old iPod and either give you a discount on the new one of the same style or a discount on a new one of the 3rd gen. I recomend the first option if your iPod is unused.

Apple ID not working to sign into Adobe Content Viewer on iPad

Why does the same Apple ID and password used to get me here not work when opening Adobe Content Viewer for first time on iPad? I keep getting "Authentication failed." I know the Apple ID and password are correct.

Use your account to sign in to the DPS Dashboard (https://digitalpublishing.acrobat.com) on a computer. Follow the prompts to open an email message and verify your account.

Screensaver not working since update of Adobe Flash

I have a screensaver that I downloaded last year that won't
work now after the adobe flash install. It gives an error message
of "Macromedia not found". Does anyone have any ideas?

Force iPad into Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

Not working...imagenomic plug in & adobe cc :(

Similar Messages

Maybe you are looking for