Not working of AVT stingray F146B CCD camera in Labview, but it works in NI MAX

I have CCD camera, AVT Stingray F146B. And I want to use it with the labview. The camera well works in the NI MAX. I can grab and snab some images by using NI MAX. However the camera does not work in the labview. When I run the labview program, the error message is appeared.
Error-1074360311 occures at IMAQdx Poen Camera.vi
possible reason: Camera not found.
I think that the old version of the NI vision acquisition can be a reason. So I installed with new vision. I use now NI-IMAQ 4.7, NI-IMAQdx 4.0, NI-IMAQ I/O 2.6.
What is the problem? What shall I do for using it?
Attached is my imaging program.
Attachments:
new imaging program.vi ‏97 KB
new imaging program.vi ‏97 KB

Searching this forum I see another exchange that may be relevant:
http://forums.ni.com/t5/LabVIEW/PLEASE-HELP-IMAQdx​-issues/td-p/1864645
Not sure if that's it but worth looking into, I suggest!
Scott

Similar Messages

  • How to get the real-time data from a CCD camera in labview?

    I am going to setup a monitor system and need to acquire the intensity of each pixel at each second from a CCD camera. Also, I need to to some simple calculations with these real-time data at every moment to get my finanl output in this monitor system.
    How may I do this using Labview?
    Thank you very much.
    Kai

    We don't have special powers, so we can't guess if you have Imaq Vision or not, if your camera comes with a LabVIEW driver, if it has an USB interface, or firewire, or a dedicated NI card, if you just want to detect a move, or a change in intensity, etc...
    So, try to be more specific with your question, that will helps a lot  
    Chilly Charly    (aka CC)
             E-List Master - Kudos glutton - Press the yellow button on the left...        

  • I can not watch YouTube safari. The video came out black ,but it has sound

    I can not watch YouTube on safari. It came out black screen , but it had sound.

    Does it work on the YouTube app ?  Other people have been posting the same issue with YouTube over the past few days - see if the following help.
    Try clearing Safari's cache : Settings > Safari > Clear Cookies And Data (Clear Cache on iOS 4) and also Clear History
    If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Valuemotion driver version 5.01 not working with windows xp

    The valuemotion driver version 5.01 is not working on windows xp. When used it does not work properly on MAX automation explorer.Please Guide me as to how I should proceed??

    I am not sure exactly what behavior you are seeing, but you will want to upgrade to the latest version of Valuemotion 5.0.2 from the following link:
    http://digital.ni.com/softlib.nsf/websearch/68E44A959190305F86256A5500685480?opendocument&node=132060_US
    Best Regards,
    Chris D
    NI Applications Engineer

  • Hello, how can I interface a princeton ccd camera (microscope camera) with labview??

    Hello,
    Im trying to connect my microscope cam to labview, but Im getting started with labview,
    my camera is managed by  a software called win view and it works; but I'm trying to control the camera by labview.
    what's the way to allow labview to see my cam??
    best regards

    Hi Marcio,
    it is important to have right information on the hardware you are using. in particular which is your camera type (FireWire, analogic, Camera Link, GigaEthernet, USB) and if you have the drivers of your image acquisition board.
    Have you got LabVIEW Development System only? Which version? Do you have others NI LabVIEW Modules or NI Softwares (for instance NI Vision)?
    I'm waiting for your news.
    Hudson | AE NIIT

  • How to configure an ip camera in labview

    I need to control several ip cameras in labview, but I don't know how to configure and add one of these cameras in a labview application, in order for me to get video and to take pictures.
    Can someone please tell me how to do this in a way that doesn't involve a camera adapter that can only handle 1 camera at a time. And if I have to use one of these softwares, please sugggest one that can handle a minimum of 5 cameras at the same time.
    Thanks in advance!

    Hi nando1988,
    If I Understood, you can see cameras connected to your computer but not the cameras in the local network. Am I right?
    I'm sending you a manual to connect an IP Camera to your system and recognize it. 
    http://www.baslerweb.com/media/documents/AW00064504000%20Interface%20GigE%20Cam%20NI%20Vision%208-2-...
    I’m sending you another document that explains how to acquire image from a specific camera in the network, is like a Getting Started with NI-IMAQ.
    http://www.ni.com/pdf/manuals/373379g.pdf
    http://www.ni.com/pdf/manuals/371424h.pdf
    Hope this information helps you in this and another projects.
    Regards
    Omar I.
    Applications Engineer
    National Instruments

  • Camera Raw not working with Photoshop and Bridge CS6

    Hi guys,
    Had a hard-drive meltdown the other week and lost everything. I have re-downloaded and installed most of my important software, including the CS6 suite. I used to use camera raw alot with my .CR2 files and it worked fine for ages, now though, it doesn't work at all.
    I have run an update and everything is up to date now, i've purged the cache and it's still not working, no preview on bridge or anything.
    I have also tried going through the Camera raw updates on the Adobe website. I have tried deleting the plug in and redownloading it altogether too, no help.
    Furthermore, when i try to open a .CR2 file through bridge into photoshop i get a message window:
    My Camera Raw Version:
    My photoshop version:
    No preview of files in Bridge:
    Any help would be greatly appreciated!
    Chris

    Hi Benjamin,
    Yes I have tried that, my OS doesnt run it. I'm on:
    Chris

  • Live! Cam Voice (mic not working)

    Just bought Live! Cam Voice yesterday. Mic still not working properly even after verifying the installation. Please advise how to rectify.
    Thanks,

    Hi,
    Is there any chance you could upload the drivers from the cd for me please because creative dont currently support the camera.
    I can give it a trial run on my windows xp and give you some feed back after.
    Thanks,
    Rav

  • I was using Lightroom v5.6 when a notice came up to update to v5.7.  I did the down load but must have gotten a bad down load because it will not install.   And the old 5.6 on my desktop will not work.   So no 5.6 or 5.7 . any ideas  how to get something

    I was using Lightroom v5.6 when a notice came up to update to v5.7. So I did the download but it would not work or install.  And the 5.6 version will not work now either.   So I am screwed - no 5.6 or 5.7 and no access to Adobe Tech.   Any help will be appreciated.

    My iPod is a click wheel...I think that's fifth generation?
    I've always used my firewire cable to update my iPod. I've tried using USB in the past but for some reason it always says that my iPod has low battery and won't let me update it, so I just use firewire. Can I not use firewire with itunes 7?
    I'll try using the USB again. It's laying around here somewhere. Just gotta find it.

  • IPhone 4 front camera not working!!

    My front iPhone 4 camera is not working. I know for sure its and hardware issue. I I take it to an Apple store, what info will they ask me for, once they find out its an hardware issue. Is it going to be a free replacement? I read previous question and they said they got free replacements, I want to know what information does apple ask for?

    maybe it will work on another app camera..

  • Iphone 4 camera flash not working.

    Iphone 4 camera flash not working when taking pictures but works with the flashlight app. I have ios 7. Tried factory reset. My wife has the same problem with her iphone 4 since the first month she has had it. Any suggestions?

    and what have you done to try and fix the situation?  Have you taken the steps recommended in the User Guide?

  • Iphone 6 plus front camera not working in whatsapp

    iphone 6 plus 64GB iOS 8.1 front camera not working in whatsapp

    It seems the facetime camera does not work for whatsapp only it works normally.

  • Iphone 6 plus facetime camera not working after 8.1 upgrade

    iphone 6 plus facetime camera not working after ios 8.1 upgrade, also while making calls the voice on the other side sounds distant. Any pointers.

    It seems the facetime camera does not work for whatsapp only it works normally.

  • Iphone 4 front camera not working even after reboot,resets and restore.

    i am using iphone 4 .I have problem that front camera is not working even after reboot,resets and restore with itunes.I thing there is a hardware problem.
    Now i wont to go apple store for replace the phone because phone is under warranty period.But problem is that i lost the receipt.Will apple store help me without my receipt ?please help me

    If setting up as new device without using the latest backup does not bring the camera function back, get it looked at or serviced by Apple:
    How to back up your data and set up as a new device
    Apple - Support - Service Answer Center

  • IPhone 4 - Camera is not Working

    Hi all,
    This is my 4th post on this forum reg. NOT WORKING Camera of the iPhone 4,
    Today I went to Apple Store at Washington Square, Tigard, Oregon.
    I talked to one of the employees that the problem is :
    - New iPhone,
    - Manufacturer International Unlocked phone, I bought it from Dubai, UAE.
    - Everything fine but both Cameras not working,
    - I did restore & reset the phone twice & the installed software is 4.2.1
    The employee said he has nothing to do because we are supporting ONLY AT&T & Verizon iPhone ( iPhone sold only in US ).
    I tried after that to restart the phone 5 times (pushing & hold the upper ON button for 10 seconds ) & the first thing to do is to switch the camera.
    My Camera now working fine & I hope all do to get same.
    Thanks for all.

    I had the same problem, and the first time I tried to restore, it did not fix it. Then I tried restoring it to a previous backup of my phone (I had about 4 different backups), and the camera works again. Hope this helps.

Maybe you are looking for

  • Downsampling pdf on the mac...?!

    my butt is dragging on this issue and I feel like asking pdf for my butt back. i am using Preview, Aperture, and Pages - among other things and I need to get a submission with images uploaded somewhere so that it is under 2 MB. I finally figured out

  • HTMLB TableView: Edit first Line

    Hi, I have implemented an HTMLB TableView with the attribute selection mode 'singleselect'. The users can mark one row to edit. This works so far. But as the users have to maintain at least one row, the first row should initially be editable <b>witho

  • Increase icon size of one icon

    Is it possible to increase the size of only one icon on the desktop? Thanks and I look forward to your reply. ...Bruce

  • Remote Control Menu Button

    Starting from the top, I have a 1st play title menu (A) with 4 buttons that are targeted to 4 other menus (B) – each of which, have multiple motion buttons leading to individual clips (C). I would like to be able to click on the Remote Control Menu b

  • *** How to set up incoming mail servers in Apple mail

    I wasn't able to reply to messages in my inbox this morning so I trashed the mail preferences and re-opened the program. I had a bit of a panic initially but realized that all my mailboxes were there (thought they had been deleted). The problem is th