Not working proper

I bought the Muvo V00 recently but lost the CD that came with it. I've had a couple of MP3 players in the past and didn't really?need the CD. I downloaded a bunch of songs to it from my windows media player and now every song on it sounds like it is skipping, my CD's don't have scratches in it. What do I do??

Hi,
Try playing the songs from your computer, do you hear skipping?
If you do, something's wrong with the songs, you may need to rip them again. If not, try upgrading the firmware of the player to see if it hel
ps.

Similar Messages

  • Ipad i have load swf file but swf  is not working proper(flex 4.6) but android is fine to work how

    ipad i have load swf file but swf  is not working proper(flex 4.6) but android is fine to work how

    On the MBP, in iTunes, switch to Song view and enable the iCloud Status column by pulling down View > View options and selecting the option for "iCloud Status." Close the small window. Look for any tracks that have a status of "waiting." If you see several of them disable iTunes Match while holding down the Option key. Quit iTunes, wait a few seconds, then open it again and turn iTM back on. Let it compelete the scan. Wait until all tracks that are "waiting" have a status of either "matched" or "uploaded."
    On the iPad, turn off iTunes Match then launch the Music app and let the contents clear out. Power cycle the iPad for good measure, then re-enable the service once all the tracks in iTunes have been processed.

  • Not working proper cellular network work only wifi

    I Have iPhone 5 my phone not working proper cellular network work only wifi connection we are try will everything but not solve my problem

    maheshpl80 wrote:
    we are try will everything but not solve my problem
    What all of "Everything" have you tried????

  • Looking for good sound module/card for AE CS4 and AE CS5.5 Echo Audio not working proper

    Hi,
    I have two different computers, one with AE CS4 and a other one with AE CS 5.5.
    On both systems ( Windows 7 64) my Echo audio fire4 sound-module driver is not working proper
    and crashing AE. Despite the latest updates from Echo. When I uninstall the driver the problems
    are gone!
    That's the reason I'm looking for a good stable sound-module (FireWire) to work with Premiere Pro
    and AE.
    Thanks! David

    Hi,
    I have two different computers, one with AE CS4 and a other one with AE CS 5.5.
    On both systems ( Windows 7 64) my Echo audio fire4 sound-module driver is not working proper
    and crashing AE. Despite the latest updates from Echo. When I uninstall the driver the problems
    are gone!
    That's the reason I'm looking for a good stable sound-module (FireWire) to work with Premiere Pro
    and AE.
    Thanks! David

  • Wifi  and GPS not working proper

    hi all,
    first of all sorry for bad english German you know :o)
    my Iphone ist 3GS with 4.3(8F190) Modell MC139DN
    i resetet the Network and also i resetet the hole Iphone and startet new with the last backup.
    by the way, 3 month ago it helps when GPS signal was very poor
    but still.... wifi is working ONLY 1 m in front of the server /___sbsstatic___/migration-images/migration-img-not-avail.png from 2 m up no signal AND then SWITSHING TO 3G
    and
    GPS /___sbsstatic___/migration-images/migration-img-not-avail.png ist also not working proper what means :
    the apple app "maps" ist getting the signal lets say every 5 to 10 min end the blue dot is jumping to the next point of the map afer 20 minits the iphon is no longe abel to show a card /___sbsstatic___/migration-images/migration-img-not-avail.png/___sbsstatic___/m igration-images/migration-img-not-avail.png
    with navigation software ( i use it for horse riding on large tours, saiyling and car driving in differet apps: no signal ( and Working) at all /___sbsstatic___/migration-images/migration-img-not-avail.png
    Best regards from Germany
    and any how have a good time

    hi all,
    first of all sorry for bad english German you know :o)
    my Iphone ist 3GS with 4.3(8F190) Modell MC139DN
    i resetet the Network and also i resetet the hole Iphone and startet new with the last backup.
    by the way, 3 month ago it helps when GPS signal was very poor
    but still.... wifi is working ONLY 1 m in front of the server /___sbsstatic___/migration-images/migration-img-not-avail.png from 2 m up no signal AND then SWITSHING TO 3G
    and
    GPS /___sbsstatic___/migration-images/migration-img-not-avail.png ist also not working proper what means :
    the apple app "maps" ist getting the signal lets say every 5 to 10 min end the blue dot is jumping to the next point of the map afer 20 minits the iphon is no longe abel to show a card /___sbsstatic___/migration-images/migration-img-not-avail.png/___sbsstatic___/m igration-images/migration-img-not-avail.png
    with navigation software ( i use it for horse riding on large tours, saiyling and car driving in differet apps: no signal ( and Working) at all /___sbsstatic___/migration-images/migration-img-not-avail.png
    Best regards from Germany
    and any how have a good time

  • The game max payne 3 not working proper.. why??

    i downloaded max payne 3 for 20$ and its not worth ... its not even working proper and it made my mac slow...
      now my mac got really slow idk wht to do?

    Hey parmmaan!
    I have two articles for you that will help you start troubleshooting this issue. First is an article that can help you boost your graphics processing for graphics-intensive applications such as games:
    OS X Mavericks: If graphics-intensive tasks slow down your Mac
    http://support.apple.com/kb/PH13952
    Next is a more general article about troubleshooting for slower response times on your Mac:
    OS X Mavericks: If your Mac runs slowly
    http://support.apple.com/kb/PH13895
    Thanks for being a part of the Apple Support Communities!
    Cheers,
    Braden

  • BT Vision Box and Remote Control not working prope...

    Hi,
    Can anybody help me please?
    I have a black BT Vision Box. The remote control had increasingly been sticking so tonight I just turned the power off tonight, left it off for 20 seconds and turned it back on.
    It seemed to turn back on and reboot itself normally, it took the amount of time it normally does on a couple of occasions when it froze a few months back. However since I rebooted it approximately 3 hours ago it has been turning itself off and rebooting itself every 10 minutes or so. On one occasion when I turned it off on the front of the machine and left it for a few minutes, it turned itself on and started rebooting itself again. 
    The remote control is worse than when it was sticking, now there is a delay of up to 30 seconds after I press a button. Sometimes it does not work at all, when that happens it just becomes stuck and eventually reboots itself.
    So far I have tried turning it off and on again, I have also tried rebooting the internet connection (which is working fine). I have tried pressing the off button on the actual box for 10 seconds and resetting it that way. I have put new batteries in the remote. Nothing has worked. If anyone can help me that would be great.
    Solved!
    Go to Solution.

    Hi, 
    Unfortunately I can't get that far now.
    I turned all TV related systems off last night in an effort to see if it would work properly today.
    I came home from work and turned everything on. The system boots itself up until it gets to a grey screen that says "Nearly there..." with the BT logo in the bottom right corner. It stays like that for approximately one minute. Then it turns itself off and starts rebooting itself again. 
    I have tried pressing the on/off button on the front of the box and holding it in for 10 secs or so until the box turns itself off and reboots but the effect is still the same as above. 
    Do you have any other suggestions pleaase, aside from throwing it in the bin?

  • Camera is not working proper

    Hi .
    I have Blackberry Playbook. its camera is not working . Well it opens but when i tap to take a picture it shows an error (error.4003 picture) and does not respond.
    Usman Mustafa

    For some users with this issue, doing the 'debrick' procedure has worked.
    You need to follow these instructions to "debrick" your PlayBook:
    1. Do a backup of your PlayBook using your computer and BlackBerry Desktop Software version 7 installed. It can be downloaded from http://us.blackberry.com/apps-software/desktop/
    2. After the backup is finished, unplug the PlayBook and on the PlayBook press and hold down the power button until the unit forces the device off.
    3. With the Desktop Software still open on your computer and the PlayBook powered off, connect the PlayBook to your computer once again.
    4. You should see an error screen from Desktop Software popup with the options to Retry, Update, or Cancel.
    Very quickly choose the Update option.
    5. All information will on your PlayBook will be erased and a reload of the Software will commence to install on the PlayBook.
    6. Once this is complete your PlayBook will go back through the initial (as if new) setup wizard (entering the BlackBerryID, etc., and then you can perform a restore using Desktop Software to return your personal data from the backup. Applications which you downloaded from AppWorld won't restore, but they can be easily reinstalled using AppWorld > MyWorld section of AppWorld.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • New Drivers Not Working Prope

    I installed the 2.5.0006 drivers for my XFI Extreme Gamer because Creative Auto Update listed it as critical. After installing it, my max number of sound channels dropped from 28 channels?to 64 channels in Battlezone II. In Crysis, every once in a while, bullet collision sounds will be staticky too. Mainly the sound that plays when I shoot a person.
    I even tried the beta drivers and they outright don't work in Battlezone II. I get the proper 28 max sound channels, but the same sound file fails to play more than once. So if I jump once, I get the jump sound. I jump a second, third, fourth, etc time and I get no sound. A given sound will only play once. On top of that, sounds won't play, but my audio channels will get eaten up resulting in total sound failure given enough time. The card doesn't let go of sound channels when not in use so it just eats up more and more sound channels.
    Is anyone else having these problems? The stock Windows XP drivers worked just fine for this card so I'm going to roll back to them. It would be nice if a Critical driver update would work as expected.

    This is absolutely true. Each new release of the XFI drivers have steadily gotten worse for me. Last night I removed all software and drivers, rebooted into safe mode and ran driver cleaner. Then booted back into normal and tried to install the 2005 CD drivers that shipped with the card. It says v5.2.2.43. 8/8/2005 under the driver tab in device manager.
    I kept getting blue screen reboots during the driver reinstall and then again on bootup afterwards, so I discovered in safe mode that that in the driver folder on the CD, if you run the driver setup utilty manually instead of through the creative flash installer, there is an option to remove drivers. This cleans out more then then the add/remove programs uninstaller and driver cleaner combined! Because after i ran that and rebooted into normal, everything installed fine.
    I am happy to report that with these CD drivers and software, I no longer have crackling during loud scenes of movies or games in all channels and my center channel now plays sound correctly from all sources. I believe as well that I wasnt getting as many channels of sound as i should have, which may have aided the crackling. So to anyone with issues like that, DOWNGRADE.

  • Soundblaster live external soundcard not working prope

    I have been trying for over a week to get my card working tech support has not helped much I have done everything but hit it with a hammer!
    I am getting choppy sound on games and mp3s mainly at the start i have tried :using it in usb with no other usb connected,reinstalling drivers,dis abled onboard sound from the bios, re installing card and doing it all over again. can anyone suggest anything else to try?
    anker

    i don't know the new versions of cubase but...
    switch everything off, no... wait wait wait, i haven't finished yet...
    when everything is off, plug up AUDIO 6, power up and then go to the apple icon in the top left of the finder window.
    click about this mac
    and then click more info
    then click on system report (you might not see this bit and the next page opens anyway)
    then click on the hardware column please hit USB
    can you see the AUDIO 6 listed on the right?

  • Cannot slide to open. Touchscreen not working proper

    After charging my iPad when it turns on the touch screen doesn't work properly. You cannot slide to open. A black outline appears around the slide to unlock and you must keep tapping inside the outline before it moves on.  His happens for everything you try to touch.  I have turned power off and back on, have held the wake and power buttons down for the apple logo to pop back up, but it still does not slide properly.  Help??!

    I think that you might have VoiceOver turned on if you have to double tap everything to get things to work.
    http://support.apple.com/kb/HT4064
    VoiceOver
    If VoiceOver is on and you want to turn it off from the device instead of from iTunes, remember that a double-tap acts like a single tap and you need to use three fingers to scroll when VoiceOver is on:
    Press Home.
    Tap Settings. Then double-tap Settings.
    Tap General. Then double-tap General.
    Use three fingers on the screen to scroll to Accessibility.
    Tap Accessibility. Then double-tap Accessibility.
    Tap VoiceOver. Then double-tap VoiceOver.
    Tap "On" next to VoiceOver. Then double-tap "On" to turn it off.

  • Isnull not working proper

    Hi,
    In this table :
    id    amount
    01     1000
    query : select isnull(amount,0)  from tbl  where id ='01'
    output :1000
    but in this query :
    query : select isnull(amount,0)  from tbl  where id ='02'
    output :
    why here isnull not return 0

    The query is read in this way:
    - select a row / rows where id = '02'
    - if it exists and the column [amount] is the null mark then return zero as the value of the column
    Since there is no row where id = '02' then there is nothing to return.
    I guess you understood that ISNULL function will return a row if it does not exist, but that is not the way it works.
    AMB
    Some guidelines for posting questions...
    AYÚDANOS A AYUDARTE, guía básica de consejos para formular preguntas

  • Featchures not working proper after update

    the back button stopped working after update. cant even past and copy ulrs to the address bar.

    Start Firefox in <b>[[Safe Mode | Safe Mode]]</b> to check if one of the extensions (orange Firefox button, top left corner ([[Image:new fx menu]] for v29+)/Tools > Add-ons > Extensions) is causing the problem (switch to the DEFAULT theme: orange Firefox button, top left corner ([[Image:new fx menu]] for v29+)/Tools > Add-ons > Appearance).
    *Do not click the Reset button on the Safe mode start window or otherwise make changes.
    *'''Windows/Mac''': Go to Help > Restart with add-ons disabled
    *'''Linux''': Run ''firefox -safe-mode'' in the Terminal/Konsole

  • Wi-Fi sync not working, proper steps followed

    I know there are a lot of discussions on this, but it doesn't seem that my particular issue has been resolves.  I have an iPhone 4, MacBook Pro running Lion 10.7.2 and iTunes 10.5 (64 bit).  I'm also running a Linksys E2000 router.  Both of them are connected to my home wi-fi network as well as my iPhone has the "Sync this iPhone over Wi-Fi" box checked.  Both my laptop and iPhone are plugged into power sources.  Everytime I tried to wi-fi sync, it say Sync will resume when "xxxx MackBook Pro" is available.  I've tried the following fixes:
    1. Restarting both my iPhone and laptop - didn't work.
    2. Unchecking the wi-fi sync box, syncing, rechecking box, syncing again. - didn't work.
    3. Restoring my iPhone as a "new iPhone" then setting it up for wi-fi sync - didn't work.
    4. Restarting iTunes. - didn't work.
    Does anyone have any solutions that I haven't tried?

    Have you tried these steps?
    1. Connect iPhone to Mac with the cable.
    2. Mac iTunes: Select your device then click the Summary Tab.
    3. Checked the Sync with this iPhone over Wi-Fi.
    4. Click Sync button at the bottom right.
    5. When finished Syncing, DO NOT click the eject icon next to your device name.
    Just detach the cable from your iPhone.
    If successful, you can still see on the left pane in iTunes your iPhone device (even though no cable is connected).
    If that's the case, every time you plug into a power supply, it will sync automatically.
    Otherwise you can sync manually on your iPhone. 
    Tab Settings > General > iTunes Wi-Fi Sync: Tab Sync How button.

  • Subwoofer not working prope

    Hello.
    I recently purchased an Audigy Value soundcard and I'm using Altec Lansing's 5i 5. speakers.All the speakers work fine except for the subwoofer. The bass produced is very weak even though the subwoofer volume is maxed out. Is there any settings that I can tweak to make the subwoofer work properly?Thanks.

    Are you playing stereo or DVD surround sound? If stereo, then are you talking about the subwoofer volume control in the Surround Mixer, Advanced tab (with CMSS 3D selected in EAX)? Or the subwoofer volume in Speaker Settings, Bass Management? There might also be a Bass Boost tab. Not sure if the Audigy Value has these options, or you may have all this setup already, so this may not help.

  • UPGRADED MOTHER BOARD, GRAPHICS CARD, CPU. AUDIGY NOW NOT WORKING PROP

    Any advice you could give would be great.
    just installed gigabyte 95p main board. PCI express Inno3D Geforce 6600GT graphics card. P4 3.4Ghz CPU and Gig ram.
    I have an audigy platininum with dri've bay.
    It keeps crashing the system. the mixer dont work nor the remote.
    when re-installing drivers, the system crashes. I've downloaded latest drivers.. the system crashes when I try to install them. each crash gives me the blue-screen-of-death then restarts the system. I cant see any conflicts, I'm not a novice but I dont know much about the the registry or irq's etc.
    Yours Hopefully Chris

    Hi
    Error Message: "BAD_POOL_CALLER Stop 0xC2."
    Translation: You're trying to print or use Windows Explorer to open a document that
    contains a bad or corrupted font.
    Solution: Microsoft determined that this is a problem with Win2000 Professional,
    Win2000 Server, and Win2000 Advanced Server. A hot fix is available by contacting
    Microsoft Help And Support via phone (visit the Help And Support site at
    www.support.microsoft.com to obtain an appropriate phone number). However, keep in mind
    that Microsoft recommends installing the fix only if you're experiencing a problem and
    that you will be charged a fee for calling the Microsoft support number unless the
    support staff determines that the update will resolve your problem.
    .jtp
    P.S.
    Did you had Dr.Watson running when crash occurred. Utility writes (append) all the
    information into a file called 'drwtsn32.log' (path C:\Documents and Settings\All
    Users\Documents\DrWatson). Recent information is the last one.
    .jtpMessage Edited by jutapa on 03-20-2005 09:55 PM

Maybe you are looking for

  • How do I install Samsung Smartview2 on my Mac with Yosemite

    Hi, it is impossible for me to install Samsung Smartview2 on my iMac with Yosemite . Any suggestions?

  • How to transfer photos from iphone 4s to MacBook Pro

    How to transfer photos from iPhone 4s to MacBook Pro? The sync is not working. The software is upto date on both the phone as well as on the laptop. The 4s uses ios6 and laptop is Snow Lion (latest version). Please advise.

  • How to do a file upload & download using Apache Commons FileUpload?

    Hi, I have read through the user guide but I don't understand what are the steps as to implementing the functions... http://commons.apache.org/fileupload/using.html How do I Create a servlet to read the contents(filename) of te dir where the files ar

  • Error Code 0X8002006D while burning DVD's

    I've had a problem with my SuperDrive burning DVD's. I succeeded in burning CD's a while ago, but DVD's now. The error message 0X8002006D is popping up. What's does the error code mean? Could the laserlens be dirty or...?

  • Ipod tv shows?

    ok. i got my ipod 30 gig with video. and im trying to organize my videos into the locations they go in(movies go in movies, music videos in music videos, etc.)but im haveing trouble getting my tv shows into the tv shows section on my ipod. it show up