Not working right-will not let me type a new emall, pull contacts, also will not let me use wireless printer-kept shutting down windows.

firefox will not let me type in yahoo mail as new email. will not pull up contacts. also, when I use wireless printer-it shuts down windows.

Couple of points...
DJ_Jynxx wrote:
The thing is, this MUST be an Audition CC issue for two reasons. One, everything worked fine in CS6, which I was using right before I upgraded to CC. I even did a clean install of it by removing CS6 completely.
All versions of Audition can co-exist on the same machine quite happily - there is no interaction between them at all, and the system was designed to be like this. So there's nothing to stop you keeping CS5.5, CS6, CC and even Audition3 on the same machine.
The other thing I'm wondering about is Windows 8. There have been a considerable number of complaints about this doing weird things, including with Audition. I have a system that in many ways is very similar to yours, except that I don't overclock the mobo, and use a professional sound device (or two) with it (RME). The major difference though is that I use Windows 7 pro 64-bit, and I haven't had any of these problems at all. Yes I use it for a living, as well, but I don't bother with multiple DAWs - don't have time for all that these days. But I do use iZotope's RX software in its standalone mode without any difficulty.
I'm not claiming that Audition CC is trouble-free - any number of Mac users will confirm that - but people running it on W7 certainly seem to have far fewer problems with it. It may also be worth trying an uninstall-reinstall of CC - you never know. But differences in preview quality certainly point towards audio drivers, I'm afraid...

Similar Messages

Why my ipod touch 5g crashes, it does not work and the touch after a type is loaded and will be locked?

why my ipod touch 5g crashes, it does not work and the touch after a type is loaded and will be locked?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

T42 keyboard not working right, HELP PLEASE

My keyboard is not working right. If I push the key it wont work,but if I hold the key for a couple seconds then it works was told to replace the keyboard and I did with a new one. But it is still doing it. Can anyone tell me what the problem is. Model # R4U machine type 2378, OS XP-PRO , COA SP2 , S/N L3xxxxx.
Message Edited by scottzilla on 12-15-2008 10:05 PM
Moderator Note; s/n edited for members own protection
Message Edited by andyP on 12-16-2008 07:57 AM

It's the Quick Selection Tool in Photoshop Elements 9 and I'm trying to get the background and make it another layer so I can even out the color of the background then bring down the transparency. Not sure if that makes sense. I'm new to this.... Sometimes the area it will grab can go ...not fast.. but not slow. Sometimes it's like it's just messed up and literally takes 30 seconds to process each move. I rebooted my computer and re opened it and it helped a little. It's not clear what causes it when it messes up and when it doesn't. Just frustrating. It's probably user error because I'm so new at Photoshop. Thanks for your input. I really appreciate it.

My keyboard does not work right how can i fix it

I have the iphone4 I bought from Verizon about 2 months ago and now my key board will not work right how do I fix this? I have tried to reset factory settings and all of that but it did not work! If I can not fix it my self will Verizon send me a new one ?

That's a very important component of your phone, tiffanymoyle. Let's see what we can do to get your keyboard back up and running correctly. What issues are you encountering with the keyboard? Do certain letters not register when pressed? Does it make a difference if you turn your phone to function in landscape mode?
NicandroN_VZW
Follow us on twitter @VZWSupport

Remote not working right

I've had my FIOS about 2 months, put new batteries in remote and it is still not working right. Some things work fine. Other things stopped working - can't delete a DVR show, can't change channels with one digit, but it will if I add all 4 digits, info box on bottom of screen never disappears (unless I hit exit). What's wrong?
My second TV set-up is OK.
Solved!
Go to Solution.

netmouse wrote:
I've had my FIOS about 2 months, put new batteries in remote and it is still not working right. Some things work fine. Other things stopped working - can't delete a DVR show, can't change channels with one digit, but it will if I add all 4 digits, info box on bottom of screen never disappears (unless I hit exit). What's wrong?
My second TV set-up is OK.
Might not even be a remote issue. Have you tried rebooting the box?
If you do think it's the remote it's still under warranty.
You can get a free replacement easy within the dvr's menu.
Here is a page that tells you ways to get a replacement.
http://www.verizon.com/support/residential/tv/fiostv/remote+controls/troubleshooting/questionsone/12...
Get a new remote and if you still have the same issues then you'll know its the dvr that needs to be replaced.

TS3694 I tried updating my iPod, and ever since it has not worked at all. If I hold in the lock & home button, it will tell me to plug it into iTunes. Once I do that, it says it will restore but every time, restoring it fails. My iPod is not working at al

I tried updating my iPod, and ever since it has not worked at all. If I hold in the lock & home button, it will tell me to plug it into iTunes. Once I do that, it says it will restore but every time, restoring it fails. My iPod is not working at all, and I really have no idea what to do. It is just a black screen, and occasionally the white apple will appear as if it were turning on, but it won't turn on. I just need some suggestions on what to do!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

IPad 2 was updated to latest iOS 7 and has been not working right since. I have tried to do a restore but still continues to go into reboot mode by itself and very erratic. Can no longer trust it. I tried to complain to Apple but have to give them 20 buck

iPad has not worked right since it updated to latest software. Tried to question Apple about it but it costs 20 bucks just to lodge a complaint. Is this normal Apple behavior or am I missing something. Also anyone else having issues with upgrade to iOS7. It was working great until that point and now goes into reboot mode often and sometimes will continuously reboot several times. I have tried to restore but that didn't clear the problem. Any thoughts or help would be appreciated.

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

My Time Capsule expired and no longer works. My printer (a HP) will now not work as it still wishes to connect through the Time Capsule. It will not allow itself be recognised through a USB connection to my Mac. Anyone got any ideas?

My Time Capsule expired and no longer works. My printer (a HP) will now not work as it still wishes to connect through the Time Capsule. It will not allow itself be recognised through a USB connection to my Mac. Anyone got any ideas?

You will need to install the printer on your Mac
Open System Preferences (gear icon) on the dock
Open Print & Fax
Click the + (plus) button at the bottom of the printer list
Wait for your printer to appear in the next box, then click it to highlight it
Click Add at the lower right
Be sure to select the correct printer when you try to print as you will see your printer listed twice. Good idea to make the printer now installed on your Mac the default printer so you do not have to choose which printer to use each time you want to print.
You can also go into Print & Fax, select the printer associated with the Time Capsule and click the - (minus) button if you want to delete that location.

Since updating to 706 the sound on my ipad2 is not working right. On videos or music. There is constant distortion and what sounds like interference. Any ideas?

Since updating to 706 the sound on my ipad2 is not working right--on videos or music. There is distortion and some kind of interference at all times. Any ideas?

Has the unit EVER been jailbroke?
If "No," first try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this.

Safari 5.1.2 Not working right after install

Hi, after installing the update for Snow Leopard safari is not working right. Some pages don't load, and other don't load correctly.
I have to keep hitting refresh two or three times. Also thunbnails are not displaying. Even the apple page comes up looking buggy.
Please help!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. First, disconnect all wired peripherals except keyboard, mouse, monitor, and Ethernet, if applicable. Boot in safe mode and log in as yourself. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
During startup, you will see "Safe Boot" on the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Safe mode is slower than normal, and some things won’t work at all, perhaps including wireless networking on certain Macs. If you usually connect to the Internet via WiFi, and it doesn’t work in safe mode, connect using an Ethernet cable. If you can’t do that, reboot as usual (i.e., not in safe mode) and perform a safe login, as follows: Enter your credentials at the login screen, then hold down the shift key and click the “Log in” button. Keep holding the key until the menu bar appears. In this mode, your login items, among other things, won’t load.
In safe mode, test again. Same problem(s) now?
After testing, reboot (if you booted in safe mode) or log out/log in (if you performed a safe login) as usual.

LR2 to PS CS3 roundtrip not working right

I am sorry, but from where I am standing Adobe screwed up big.
In the first place, LR 2 is very slow on my MACPRO with 4 gigs, as slow as Aperture 1.5 was and was what made me switch from Aperture to Lightroom.
In the second place, PS roundtrip is not working right. LR2 sends the image to PS when I select edit in, but after I finish with the file in PS and close and save, the new file does not show up in LR 2. It is in the folder but not in the catalog. I either have to re-import the image or sync the folder. On either case, it is not stacked with the original.
What's up??
Is there a setting or something? or just a big screw up from Adobe? Why isn't Adobe addressing this issues in public?

I am having the same problem with lr2. Mine will not round trip. It goes to CS3 but will not come back when saved in CS3. Strange thing is, after having LR2 since day one of release it did round trip a few times yesterday but today it is back to its habit of no round trip.
At times LR2 is slow and the brush tool is mostly unusable since it is so slow. Also sliders are very sticky.
If the Adobe boys and girls can get it working soon LR2 is great and I feel it has increased my quality.
Bob Kuprion

My Safari is not working right. It often stalls and I get the "colored spinning wheel of Death". I send reports to Apple, but I never get any response or helpful info. What do I do to get Safari working correctly on my MacBook laptop?

My Safari is not working right. It often stalls and I get the "colored spinning wheel of Death". I send reports to Apple, but I never get any response or helpful info. What do I do to get Safari working correctly on my MacBook laptop?

From the Safari menu bar, select
Safari ▹ Preferences ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
If you wish, you may be able to salvage the errant extension by uninstalling and reinstalling it. Its settings will revert to their defaults. If the extension still causes a problem, remove it permanently or refer to its developer for support.
Uninstall the McAfee product by following the instructions on whichever of the pages linked below is applicable:
How to install or uninstall McAfee Internet Security for Mac
How to manually remove VirusScan for Mac 8.6.x using a removal script
How to uninstall and reinstall McAfee Agent 4.x on Macintosh computers
Note that if you have already tried to uninstall the software, you may have to reinstall it in order to finish the job. If you have a different version of the product, the procedure may be different.
Back up all data before making any changes.

Sound Blaster X-FI Pci Express Front Panel Not working right Win7

ASound Blaster X-FI Pci Express Front Panel Not working right Win7
Please read carefully
Part number Part SB040
Hello,
I have a fresh install of Win7x64 OEM. First, I want to say that I have "AUTOMATICALLY MUTE SPEAKERS" UNCHECKED under the Headphone detection tab. I have tried "Automatically Enable Headphone Settings" checked or unchecked. No difference.
As soon as I plug in headphones to the front panel connector , the speakers in the mixer say "disconnected" (see below) and the SPDIF becomes the default output. There is no way for me to change this. And there isn't any sound coming from the headphones when plugged into the front panel. (the mic front panel works fine)
I am using the nati've Win7 drivers for the card. Apparently the Win 7 drivers on your site are older than the nati've ones.
This worked fine in Windows XP 32. Any ideas.

Ok guys this is how I fixed the problem on my X-Fi PCI-Express. Open the Creative SB X-Fi Volume panel. Mine is set in game mode and I have 5 vertical sliders for Line-In /Mic, MIDI Synth, Digital-In, and the last one will say one of three things either Digital-In, Microphone, or Mirophone FP. At the top of the?slider there is a tab which brings up a drop down menu. Mine was default set to Digital-In, I switched it to Mirophone FP (tried Microphone first and it worked but the FP sounds better for me) and cranked it all the way up and my problem was solved. Very frustrating one though as there is no documentation that led me to the fix it was just playing around with it till I could figure it out.
I hope this at least helps some of you out.

Hi my iPad 2 is not working right is sayed I need to update it so I did and now I turn It on and it shows the USB and iTunes and I plugged it in and still nothing

Hi my iPad 2 is not working right is sayed I need to update it so I did and now I turn It on and it shows the USB and iTunes and I plugged it in and still nothing

Next try the remaining items of
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Not working right-will not let me type a new emall, pull contacts, also will not let me use wireless printer-kept shutting down windows.

Similar Messages

Maybe you are looking for