Not working sensor

perfomance is very slow and sensor not working properly

perfomance is very slow and sensor not working properly
WHAT Phone What sensor .
jje

Similar Messages

IPhone 5 proximity sensor not working! (iOS 6.0.1)

iPhone 5 proximity sensor not working! (iOS 6.0.1)
When I call , the screen is not locked(

Remove any screen protectors and cases, does the problem continue?

My proximity sensor does not work on my iPhone 4

My proximity sensor does not work on my iPhone 4

Well, it can be fixed, however it is in a very difficult spot, and it may cost me more to replace than what I can get out of it. I don't care to pay for a replacement since my warranty is up, because I already have an iPhone 5. I want to sell the iPhone4, and not for $75 either because you can't make a phone call unless its on speaker. I didn't know what other people had to say, so I just wanted some feedback on my options. I'm sorry that I am not an expert on the iPhone hardware componets, because I actually work for a living. I don't have time to sit here and play on forums. Thanks for all you're help.

IPad touch-screen sensor the does not work on one part of displey

I have problem with a part of the screen on my iPad. It seems like the sensor on the screen does not work. When draging items or webpages through that section, the dragging stops. It looks like the screen is not detecting my fingers on that part. Part of the screen that is not working is about 1 cm wide. iPad is 1 month old.
Message was edited by: micronola

Had the same issue with a 1cm strip from top to bottom (portrait) not responding. I did a backup, a complete factory reset, and then a restore of the backup. So far it seems to be working again!!

Sensor does not work after hitting tablet Z

What to do? fell at an angle plate - stopped working sensor. Case-warranty and repair costs money unreal. Someone tell me - what can I do?

The first thing I would do is to do a factory reset and/or reinstall the software with SUS or PCC, but I don't quite understand which sensor you are referring to, if you meant to say the Digitizer/touchscreen then you will have to either pay Sony or buy the piece online and install it yourself
Update Service (SUS)
PC Companion (PCC)
Bridge (for Mac)
Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

HT201412 my iphone 4s does not start by power switch, it starts when i connect to pc. the proximity sensor is not working. please help

my iphone 4s does not start by power switch, it starts when i connect to pc. the proximity sensor is not working. please help.

Sounds like it may be a hardware issue.
Please contact Apple Support in your country.
Here is a list of numbers: http://support.apple.com/kb/HE57
Regards
J

Fingerprint reader not working in IE and saying failed to connect to sensor

Hi all,
I bought a Qosmio x500 10t a couple of months back. For the first couple of weeks i had no probs using the fingerprint reader to log in to windows and to log in to websites in Internet exploer.
All of a sudden it would not work on any website stored. The green banner showed accross the top of site and asked to swipe finger but nothing happened when I swiped. I rebooted and it worked again but not for long before failing. This time a reboot didnt work so i deleted my finger prints and websites and started from scratch. That worked for a couple of attempts before probs started again. And on trying to get into Fingerprint utility it says failure to connect to sensor. So, I did a system restore. It worked for a couple of times again and then same probs. So I found the updated utility software, uninstalled the old and put on the new. Same again, worked for a couple of times then failed.
I could not find anything stuck in the registry but to be on the safe side i did a full system clean back to factory setup using backup discs. Hey presto i thought it had worked. Everything going ok for first 24hrs and then same problems start to occur. Only this time it is also prompting me to enroll fingerprints even though i already have. And when i try to get into the utilioty it says failed to read sensor again.
The fingerprint log on to windows always works as long as i dont close the fingerprint utility down before shutting down. If i do exit the utilty i cant reopen it as it just says failed to connect to sensor. And then i have to unistall and reinstall the utility software. Aty the moment it occasionally works on websites stored but most of the time it doesnt do anything.
Please help. Do I need to send laptop back to Toshiba??

Hi,
*I got a solution* for the problem that the fingerprint sensor "suddenly" does not work any more.
When starting the Toshiba Fingerprint Utility, it says "failed to connect to fingerprint sensor".
Is it possible that just before it stopped working there was a new firewall installed, or firewall settings had been changed?
*In my case, the problem was solved by changing my firewall settings* (Windows 7 Firewall Control) to ALLOW all traffic for
the Authentec Fingerprint Sensor Service (AFSS). It is the file "AtService.exe" in C:\Program files
The reason is simple:
The Toshiba Fingerprint utility communicates with the fingerprint sensor service via TCP/IP.
Therefore, any firewall that blocks traffic on the local computer will block the communication.
*After changing my firewall settings, fingerprint sensor works* on my R700 flawlessly now.

HT1665 i have an apple IPhone4. I am experiencing certain problem with my iphone4. The problems are as follows a. my ear piece and proximity sensor is not working while making a call. 2. It cannot reproduce sound without earphone but rings if gets any cal

Hi folks,
i have an apple IPhone4. I am experiencing certain problem with my iphone4. The problems are as follows a. my ear piece and proximity sensor is not working while making a call. 2. It cannot reproduce sound without earphone but rings normally if gets any call.
Can any one help me in this regard??

Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose data by resetting, but it can cure some glitches after installing new software or apps.

Proximity Sensor Not Working on Brand new Z2

Hi, The Proximity sensor is not working on my new Xperia Z2. I have ran all the tests on the phone and they have failed. When Put up to the ear during a call the screen does not switch off and all the icons get pressed etc. This is VERY annoying as i cant even speak to anyone for a minute before im dialing someone else by mistake. All Software is up to date. SONY, What the soslution here? I will be taking it into the Sony Center here tomorrow but I dont want to be without my only buisness phone for 3-4 days.

OK installed each update to the pre-installed apps one at a time and tested the proximity sensor after each. All fine till Sony TV Side view : quick remote. after instalation proximity sensor stopped working. after uninstall all working fine again.Seems this is the culprit but I will add my 3rd party apps one at a time just to make sure.

My Nike sensor is not working in ipod touch

My Nike + Ipod sensor is not working in Ipod touch. I tab on it and it opens up saying walk around to activate the sensor, I walked couple of times, jogged, ran, but the sensor is not activating..Any settings to be changed or what should I do to get this work

I did try resetting the connection under Settings, also reset my i pod by restarting it, but it didnt work out. Apart from this, I have a 2nd gen Ipod for which I need a external sensor to check unlike the inbuild sensor in ipod touch. Any other option

FingerPrint Sensor/Software not working right with Windows XP Pro SP3

Hi All,
I have a 3 month old Satellite Pro S300-S2504 (2.4 GHz CPU, 3 GB RAM, Bluetooth, firewire - was a custom build with most of the options I could get). The O/S installed was/is Vista Business. It came with a dowgrade XP Pro SP3 disc as well.
I bought a second hard drive - swapped it with the original and installed Windows XP Pro on it - having grown tired of Vista. I don't intend to keep both O/S's - but I didn't want to mess with what I had until I got XP working - and that's the reason I got the second hard drive for XP. Anyway, XP Pro is installed and working except the fingerprint sensor. As soon as I booted for the first time - with nothing but the factory everything installed, it prompted me to register fingers for the sensor. I tried but I got a database not found error followed by a sensor not working error. I got the latest updates for the fingerprint sensor, removed what I had - rebooted and installed the newer program - I got the same error. I then uninstalled the program again, went through the registry and removed all entries whose key had TrueSuite in it, rebooted and installed the latest version again - rebooted - and got the same errors. Looking in Device Manager, the sensor is working fine but once I try to register a finger and it fails, I then look in Device Manager and the sensor has a yellow error indicator. I used System Restore to go back to the original configuration and then tried the Fingerprint drivers/patches for Vista and for Windows 7. All of them installed but I got the same database not found error followed by the fingerprint sensor not working error.
I did end the program, then using Task Manager, I ran the Fingerprint utility as administrator - still got the same errors. I've completely reinstalled from the Windows XP restore CD four times trying to solve this and I can't get the fingerprint reader to register fingerprints - I always get that error.
I have a lot of graphic editing (movies) software as well as file conversion programs and a very stable version of Roxio Easy Media Creator that all works fine in Windows XP - but it all has problems running in Vista and I'm tired of the bugs that Vista seems have - and I want to use Windows XP Pro. I will try any suggestions. The fingerprint sensor and software works reliably in Vista. I even updated it and that went fine. I suspect there's a problem with the XP version of the software for my computer. I did notice that Toshiba doesn't sell the this model series with XP downgrade as an option anymore. I wonder if this is one of the reasons.
Anyway - I would very much appreciate help with this. Any ideas at all are welcome.
Thanks,
Dennis

Satellite Pro M10-S405
..a clean Win XP Pro install and it still doesnt work.There is a Win Xp key on the bottom of the laptop, but I cant seem to use it.
The Product Key that comes with the computer is useless to activate a retail installation. You would need to purchase a new one or convice Microsoft that an old one is no longer in use.
In the device manager it shows
Ethernet Controller
Multimedia Audio Controller
Network Controller
Unknown Device needing Drivers. I have searched and downloaded drivers and installed them but it still doest work.
Get the drivers from here.
Install the chipset utility first, followed by the display driver. Be sure to install the common modules prior to any Toshiba utilities, including power management.
-Jerry

My i phone4 sensor is not working please send me solution

My iphone4 sensor is not working when i want to make a call my phone display is always open please send me the solution.

Try the user troubleshooting steps, restart, reset, restore from backup, restore as new. If none of these help, then make an appointment at the Genius Bar of the Apple store to have the hardware checked.
Also, if you have a case on the phone, remove the case and attempt to make a phone call to see if sometihing in the case is blocking the sensor.

My iPod touch Nike ipod sensor is not working. Please help.

My iPod touch Nike ipod sensor is not working. Please help. I even walked around when it asked me to. Also I have latest version of iOS. PLease help

Update: I seem to have fixed the problem! I went to the "summary" section of my iPod after clicking on the device on the left side of iTunes. I checked the box that allowed me to "manually manage music and videos" and applied this option. The songs are syncing! And, yay, they're playing on my iPod now! Hopefully, this helps anyone else who might have this problem. There might be other issues, but this is working for now.

Sensors Not Working. Please help!!! :(

I have got a new BB z10 and its Sensor doesnt seem to be functioning. When I take the call the take the headseat near my ear, the screen doesnt sleep automatically. similarly when I take the phn back from ear it doesnt wake up. Is this a software issue? I am on the stock OS yet and havent updated to 10.2. Please help.
thanks
Naveen

Hi,
Use the BlackBerry Virtual Expert to test the sensors. It should pre-installed, or go through the Help icon and select Test. I'd also make sure the device software is up to date, using BlackBerry Link.
If the Test shows that it's not working and the device is new. I would suggest you return it to your point of purchase for repair or replacement.
Craig Ashcroft Elite UK
If this post helps you please click the LIKE below the post(s)

Is there any official market or store or anything in Egypt to fix my iphone 4 it jumped from 5th floor and the back hous was crashed and the network sensor was not working good but the phone and the screen and the others things are ok so plz help ???

Is there any official market or store or anything in Egypt to fix my iphone 4 it jumped from 5th floor and the back hous was crashed and the network sensor was not working good but the phone and the screen and the others things are ok so plz help ???
my iphone is now just coverd with case and the back house is crased

Etisalat, Mobinil and Vodafone provide warranty service in your country. You can also search Google for a 3rd party repair shop near you.

Not working sensor

Similar Messages

Maybe you are looking for