Not working volume control of dv6-2155dx

Any idea about my problem ? the volume touch control is not working and wht light is on.

Try playing a loop in Garage Band and resetting your PRAM.

Similar Messages

My ipad2 media volume not working, volume bar not showing

My ipad2 media volume not working, volume bar not showing

here are my similar symptons:
in Settings the volume slider bar when moved plays a sound out of the speaker
when you double press home button, and slide over to the brightness and volume slider bars, the volume slider is completely gone.
when you plug in headphones it works fine, volume rocker controls volume perfectly.
when you press volume rocker without headphones, nothing happens, or a blank "sound effects" icon displays.
I sent my Ipad2 to Apple for this under warranty. They said there are some small scratches on the side of it.
It lives in a heavy duty case, but the exposed area has been knicked some how. The little divots in the metal on the side mean that "impact" must have broken it.
Forget the fact that it spontaneously started happening and that the speakers and headphones both work at various times, and the volume rocker works, but iOS 5.1.1 apps can't send sound out the speaker, but the volume settings in the sound do send out sound..
so they refused to look at it or repair it under the warranty. I was a day away from buying yet another apply device in our family that already has a couple iPod Touches and 2 iPads. I think I'll buy a droid now.

My volume key not working volume increase automatically, how to mute all audio

my volume key not working, volume increase automatically if i go to audio settings i can adjust, but again volume increase automatically , how to mute all audio

Did you already try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comeback again?
If this does not boring back a working volume control, and to rule out a software issue, set it up as new device, explained here:
Use iTunes to restore your iOS device to factory settings - Apple Support
If still no luck, you'll have to get it checked by visiting an Authorized Apple Service Provider or Apple Store next to your place.
iPhone - Contact Support - Apple Support

Iphone 4s, keypad sound not working, volume buttom doesnt show up or down

Hello,
I have bought my iphone 4s, 32gb 2 days back and i found out that the keypad sound does not work. i have gone to the setting, sound and turned on the sound of lock and keypad. However, its not working. also, the colume buttom when i click it up or down it doesnt show the bar, actually its doesnt work it shows only the symbol of sound.
i tried to reset, restore... no results
anyone can help me with that??
Thanks

I spoke with Apple and they suggested doing a restore. I did this and the sound was restored. I started installing my tweaks and programs, each time testing the sound. When I installed "Hands-Free Control" the sound issue came back. This is a tweak to allow you to control Siri without having to hold the home button. When you activate the listening option, the sound on the phone stopped working. When you turn it off, it started working again. I dont know if the rest of you are have this Cydia tweak, but that was the culprit for me.

GUI Status not working (table control)

Hello Friends,
i have created one subscreen (with Table control). This subscreen shows a table. This subscreen is called with a transaktion. Now the problem enters when i want to get out of the screen . i can not! the exit buitton does not work, and i can not move or get out even my commands do not obey!
Does it has to do with my Gui_Satus?
How do i use it appropiately.
Best Regards

hello ,
i think you havent set Function Type = 'E' for that Exit/Cancel Buttions.
in PAI
module exit at exit-command.
module exit.
case sy-ucomm.
when 'EXIT'.
set screen 0.
leave screen.
endmodule.
regards
Prabhu

F12 function key not working on my Pavilion DV6 7170er

I'm runung windows 8 X64 bit version. i'm using win 8 since few months, all that time function key work properly until hp support assistant update my system bios version to f.24 automatically .after that cause that problem f12 key is not working it's indicate amber lite every time,can't switch on wifi, if wifi on it have to turn into white clolor.all other function keys are working properly.i checked evety thing, device manager saying wifi adapter working properly but windows 8 mobile center showing it's turn off.i checked via bios system components it's showing wifi adapter "PASSED". hp connection manager programs can't open it's hanging long time and after that showing error massage - error code 80080005 .
Please if any one have suggest let me know...
Thank you...

gaurian82,
I’m glad to hear that everything is working.
Thanks for posting the solution that you found.

MacBook ('08) function keys not working (volume, etc) XP SP3, Bootcamp 2.1

I have just upgraded from a MacBook Core Duo 2.0Ghz (mid-2006) to a MacBook Core 2 Duo 2.4Ghz (mid-2008).
I had Windows XP (SP3) installed and running nicely on a partition on the old MacBook, and what I've now done is simply swapped that whole hard drive from the old MacBook to the new one. OSX (10.5) runs just fine, but Windows is giving me issues. I successfully reactivated Windows, and then did a repair installation from my original WinXP install disc, which took Windows back to Service Pack 2. I used the OSX install DVD that came with the new MacBook to install the Boot Camp Windows drivers (version 2.0), and then downloaded and ran the Boot Camp 2.1 update, and then upgraded to WinXP Service Pack 3.
The trackpad on the new MacBook is working in Windows, as is MOST of the keyboard. Only the function keys aren't working (brightness, volume, eject, etc.). I've tried using them both with and without holding down the "fn" key in the bottom-left of the keyboard, and both with and without the setting checked (in Windows Boot Camp prefs) for using the function keys for hardware purposes.
I can't help but think that the problem arises form the different layouts of the 2006 MacBook and the 2008 MacBook. The 2006 model used the F3, F4, and F5 keys for volume (mute, decrease, increase), while the 2008 model uses F10, F11, and F12.
When I look under Add/Remove programs in Windows, I see that there are still old Apple drivers for keyboard and other devices. I see versions of the drivers going back to 1.x, and also 2.0 and 2.1.
In efforts to start afresh, I've tried using both the Boot Camp 2.1 Updater and my 2008 MacBook Install DVD (which has Boot Camp 2.0) to remove Boot Camp from Windows, but neither seem to really do the trick in terms of really removing all the Boot Camp components and drivers, and reinstalling the Boot Camp drivers doesn't get the keyboard function keys working.
I've tried everything I can think of (short of erasing the partition and starting with a fresh install of WinXP, which is NOT an option). Is there some way to remove the old (or all) Apple drivers in order to install Boot Camp components anew? Or would that even get the keyboard working anyway? Any other ideas at solving this problem? Thanks very much.

AHA!!!! FIXED IT!!!
Found another forum post here:
http://discussions.apple.com/thread.jspa?messageID=7688314&
And that reminded me that the little Boot Camp grey diamond icon wasn't appearing in the tray like it should. I found KbdMgr.exe and tried to open it, but got an error. So I deleted it and did repair/update from Boot Camp 2.1 Updater, rebooted, and now KbdMgr.exe is running, the icon is in the tray, and the function keys (volume, brightness, etc) are working! Hooray!!
So in conclusion, this problem may not have been due to the different keyboard layouts, but could've been something about SP3 & BootCamp 2.1. Maybe. Who knows. I'm just happy I've got it working.

When changing headphones to 5.1 rear not working(volume panel), need to default in diagnostic t

Hi,
When I'm changing headphones to 5. in volume panel my rear speakers and middle one won't work...
I need to run diagnostic tool where I need to chose the default option in order to get my rear and middle
speakers to work.. I need to do this every time...
It get's annoying as I play BF242 and then try to listen to some music ot watch an movie in 5. ...
it takes an minute or so to do this but I would preffer not to have to....
I'm an xfi noob so there may be an setting that is causing this... does anyone knows how to change this?
edit: btw. the headphones(headset actually) are connected to the panel...
x-fi platinum champion fatalty, xp
the speakers are connected to teh x-fi card (analog)
edit2: It seems that when changing headphones to 5. the front center, rear left and rear right are being played in headphones...
:S?
Message Edited by foxhound009 on 06-07-2008 2:29 PMMessage Edited by foxhound009 on 06-07-2008 2:38 PM

Quote from: Chrysomya on 29-April-13, 20:14:26
Just downloaded a new driver for the realtek HD, will this resolve my problem? Current driver version is 6.0.1.6657.
Your issue is drivers related.
For Windows 8 use 6.0.1.6839
http://www.msi.com/product/mb/Z77A-G43.html#/?div=Driver&os=Win8%2064

Touchpad not working in HP ENVY-dv6

Hi,
I have the same touchpad problem in my envy dv6 7382la laptop. I tried all possible solutions detailed in the forum but none work. However i want try updating the Bios. There is a problem installing the last version for win8 in my win8.1 OS???
(the page have not the last Bios version for win 8.1)
Thanks,

Hi tinti80,
Welcome to the HP Support Forums!
I understand that you are having trouble with your touchpad. I am happy to help you with this.
Like you, I checked and I cannot see a specific Windows 8.1 BIOS on the HP ENVY dv6-7382la Notebook PC support page.
In the absence of the BIOS the best bet then would be to be sure all the other device drivers are up to date for windows 8.1
You mentioned that you did the troubleshooting detailed in the forum for your issue, but it looks like your post was moved so I cannot see what may have been done or what process you followed. Just in case I have included the following:
Using and Troubleshooting the TouchPad or ClickPad (Windows 8)
Please double check that you have done all of those things.
If that does not help then in the absence of a windows 8.1 BIOS to try, I would try calling technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope that this helps.
Regards,
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Audio device not working. HP Pavilion dv6-6c50us

My audio device is disabled. There is no sound both the speakers and by using earphones, how can i fix it please? Product name: HP Pavilion dv6-6c50us Product no. A6X90UA#ABA Windows 7 64-bit
This question was solved.
View Solution.

Try system recovery.. I just did it and it worked! You should restore your computer to an earlier time before the sound stopped working.. And you can do that by going to the control panel. GOOD LUCK !!!

Why does the Apple TV not have Volume Control?

I mean. I get it. I searched the forums.
But, WHY?!!!
It's so stupidly frustrating. I use my new apple tv with my older stereo as sound, no remote for that. Movies and TV Shows wildly vary their volumes and it's always handy to turn the volume up and down at a moment's notice.
Soundcheck doesn't remedy this problem.
It's such an incredibly stupid oversight it's windows-esque.
Are there any workarounds (I'm referring to using the Apple TV to watch HBO, Netflix etc.)?
Thanks. Vent if you need. Whatever.

James, it IS needed. I need it.
I mean the point is taken, but it is absolutely silly to not give users the control over something as substantial as volume.
When you watch a video on youtube, on your laptop or whatever, there is a volume slider. What a concept! So that your source can stay where it's at and you can make changes in the audio level of whatever you happen to be watching, be it netflix (oh look, another volume slider!) or youtube or whatever.
I guess, just to be clear, that is how I would implement it, and that is what I was surprised was gone.
Another Apple product that connects to varying audio inputs is Airport Express. When you want to turn a particular track up or down, you have the option to use the volume buttons on your phone. I mean... I can't be the only person who sees this feature being missing as so absurd. It's so obvious... to me

ClariFit IR Column Grouping not work when Control Break

Dear,
i am using ClariFit IR Column Grouping plugin for grouping column heading. Plugin is working fine. But when user use the Actions --> Format ---> Control Break option, the grouping column
disappears,
Can some body provide help on this issue or any alternate.
Regards,

Regardless of the limitations of IR, having quick access to controls significantly improves the experience.
Having used the Remote app more than usual in the last few days with my new speakers, I'm reminded of how terrible an app it is if you just want to get in and out quickly -- the Library must load every time you open the app, and then once it does load, you can only use it for a few seconds until it inexplicitly kicks you to the "Now Playing" screen. And this happens every single time you open the app or unlock your phone. So tasks that should be quick such as pausing, skipping tracks, or adjusting the volume take 15-20 seconds.
With an IR remote, those tasks are instantaneous. It doesn't excuse the fact that the iPhone app needs an overhaul, which is a separate issue.

link not working in control file of PDFBinder

Hello,
I am using java API of BI Publisher and need a bound PDF that may have the same document included in two places of the binder.
In such a case the document shall be merged only once and the both the entries of the document in Table of Contents shall point to the starting page of the document that was merged.
I planned to use a link in the control file to achieve this but am not able to find the link. Does anybody know if the link needs to be referred in a page template?
Below is my control file -
<?xml version="1.0" encoding="utf-8"?>
<outline xmlns="http://xmlns.oracle.com/oxp/book/">
<title>Table of Contents</title>



<toc-template>C:/tmp/toc_rtf.rtf</toc-template>
    <start-page-number>1</start-page-number>

<item id="1">
<title>Chapter 1</title>
<children>
<item id="odb">
<title>Customer Retrieval Entitlement</title>
<cover-page type="rtf">C:/tmp/chapter_cover.rtf</cover-page>
<pagenum-template type="rtf">C:/tmp/pagenum.rtf</pagenum-template>
<content-container>
    <content>I:/My Documents/P_New/Daily Jobs/Cm/PMD_FindBugs/15_May_Meeting/Customer_Retrieval_Entitlement.pdf</content>
</content-container>
<footer xmlns="">Chapter 1 - Customer Retrieval Entitlement</footer>
</item>
<item id="1_2">
<title>MoM CmCodeQualityMetrics 15 May</title>
<cover-page type="rtf">C:/tmp/chapter_cover.rtf</cover-page>
<pagenum-template type="rtf">C:/tmp/pagenum.rtf</pagenum-template>
<content-container>
    <content>I:/My Documents/P_New/Daily Jobs/Cm/PMD_FindBugs/15_May_Meeting/MoM_CmCodeQualityMetrics_15_May.pdf</content>
</content-container>
<footer xmlns="">Chapter 1 - MoM CmCodeQualityMetrics 15 May</footer>
</item>
</children>
</item>
<item id="2">
<title>Fc Installation Instructions</title>
<cover-page type="rtf">C:/tmp/chapter_cover.rtf</cover-page>
<pagenum-template type="rtf">C:/tmp/pagenum.rtf</pagenum-template>
<content-container>
    <content>I:/My Documents/P_New/Daily Jobs/Cm/PMD_FindBugs/15_May_Meeting/Fc Installation Instructions.pdf</content>
</content-container>
<footer xmlns="">Fc Installation Instructions</footer>
</item>
<item id="3">
<title>Link to Book 1</title>
    <link>
<text>Oracle Database Overview</text>
<destination>odb</destination>
</link>
</item>
<item id="4">
<title>Fc Installation Instructions 2</title>
<cover-page type="rtf">C:/tmp/chapter_cover.rtf</cover-page>
<pagenum-template type="rtf">C:/tmp/pagenum.rtf</pagenum-template>
<content-container>
    <content>I:/My Documents/P_New/Daily Jobs/Cm/PMD_FindBugs/15_May_Meeting/Fc Installation Instructions.pdf</content>
</content-container>
<footer xmlns="">Fc Installation Instructions 2</footer>
</item>
</outline>
Please advice at the earliest.
Many thanks.

Hello,
I checked your site and found that there is some component that is overlapping the featured news section (for the link that says "life size barbie dreamhouses to open..."), and hence you are not able to click on the link. This component may be an empty textframe, rectangle etc. or the frame for another component being too large.
Please go to the design mode in Muse for this page and locate this component, and remove or resize it accordingly, after which the link would become clickable.
You may open the page in design mode and "select all" for ease of locating it.
Hope this helps.
Cheers
Parikshit

RF Tuner not working correctly in Pavilion DV6-1200

Having troubles tuning the computer to the tv signal. The signal is via a wall cable RF type, Comcast cable.The computer can not detect the source data, however when a normal tv is plugged into the same cable, it tunes into 35 channels. The tv tunes to the signal prior to June 12, 2009 (NTSC). There is no setup box being used. I have used windows media centre and HP media center to tune the computer in but no success yet. The tuner mode I thought that should work is Analog Cable NTSC, plus tried every other mode many times over. The strange thing about this whole matter I was connected to HP tech support for 4 HOURS on this matter! They could not give me any reason why this was happening!!!! The tv tuner does work with the supplied antenna using the Digital Antenna Mode. When I talked to HP tech support, their so called tv tuner experts, they could not tell me what the Analog Cable NTSC mode was used for! Regards, Ed

Hi,
Please uninstall the existing version and install the newer version:
http://ftp.hp.com/pub/softpaq/sp64001-64500/sp64126.exe
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

IPad Sound Not Working, Volume High, Ringer On?

Well, this has been going on for a while now but my iPad sound just doesn't work! On YouTube the sound does work however, the ringer doesn't work anymore and out of nowhere even the application sound effects, etc. have stopped working! I'm trying to detect whether this is a hardware or software problem and by the looks of it it's hardware. Is there any other way I can tell?

1. Double-click the Home button and swipe Task Bar to the right
2. Check the volume and mute settings
http://i1224.photobucket.com/albums/ee374/Diavonex/6d3191ba.jpg

Not working volume control of dv6-2155dx

Similar Messages

Maybe you are looking for