Not writing to NAS drive after upgrade to 10.8.4

I keep my iTunes media on an Iomega ix2-200 NAS. I have upgraded to iOS 10.8.4 and now cannot write to that disk - ie cannot store new media. I only have read priviledges. Anyone else had/ fixed this issue?

Eric
Thank you for taking the time to post those links to informative articles.
In relation to the first article entitled "Resolve startup issues and perform disk maintenance with Disk Utility and fsck"
I can confirm that i was not able to start in safe mode but was able to boot up in recovery mode and run disk utility. The only one i hadn't tried is fsck.  Please correct me if I am wrong, but if from what I understand by the article, this is to be used if I could not run disk utility, with which I have been able to do and to repair both the disk and permissions. But again, if I've missed the obvious from that article please correct me.
Te second article entitled "Troubleshooting Startup and Login Items" identifies troubleshooting that should be carried out in safe mode. However I am unfortunately unable to start in safe mode and have not been able to progress past the apple logo since this problem started.
Thank you for both links and for taking the time to share. If though I have missed something more significant in this regard I would appreciate your feedback.
Many thanks 

Similar Messages

  • Not recognizing external hard drive after upgrading to mountain lion

    I recently upgraded to mountain lion.  While my external hard drive originally showed on the desktop it does not anymore,  The hard drive is partitioned between my wife (laptop) and my desktop.  My wife's part does show on the desktop but mine does not.  From reading some of the issues on the Support Community I did a disk repair as it does show up under disk utility.  Although the disk repair was performed successfully, it still does not appear.  I read some other comments about Fuse but I don't understand what this is about.  Any suggestions to get my external hard drive back so I can keep my computer backed up.  Thanks.

    It is powered (the light is on).  I was uploading photos from the drive yesterday, so it worked perfectly fine before the upgrade to 10.6.8 (which I did during the night).  Is there anything else to try before I move it to another computer to see if it works?  Again, thanks.

  • Help?  Can not find external hard drive after upgrading to 10.6.3

    I upgraded my iMac to Snow Leopard 10.6.8 and now my external hard drive does not appear.  Not sure what to do.

    It is powered (the light is on).  I was uploading photos from the drive yesterday, so it worked perfectly fine before the upgrade to 10.6.8 (which I did during the night).  Is there anything else to try before I move it to another computer to see if it works?  Again, thanks.

  • HT4790 I can not find my hard drive after encryption

    I have a macbook pro I upgraded to Mountian lion from 10.6.8.
    Went through the encryption process. Now my user can not find his hard drive after a re boot
    Steve

    Uninstall the program. It should have come with an uninstaller. If not, contact the developer for instructions.

  • Lost Deskjet 5740 printer driver after upgrade.

    Lost Deskjet 5740 printer driver after upgrade. HP site has a download but it does not appear in the driver list after downloading it. Ideas?

    Okay, as of last night, both the printers are working fine. I uninstalled the 5740 and then tried several different rearrangements of the two printers. First I tried hooking the 5150 to the AEBS and it printed fine. Then I tried hooking the 5740 to the AE and it printed fine. Finally, I tried my original configuration with the 5740 hooked to the AEBS and it printed fine! Very frustrating.... I'm not sure if Apple sent an update I downloaded in the meantime that fixed the problem or what. I can't think of any other possible explanation.
    So to recap, I can vouch that I have an HP Deskjet 5740 connected to an AEBS and an HP Deskjet 5150 connected to an AE, all set up on a WDS (wireless distribution system) with Leopard and everything works as expected. Hopefully your printer magically started working again as well Bibycat.

  • Problem:  this mac is not reading an excell file after upgrading to yosemite.   My Mac is from 2009, it use to work perfectly but it wasn´t able to open some apps, thats why i upgrade it.   Now it once i donwload the zip it appears with an ".ods" ext

    Problem:  this mac is not reading an excell file after upgrading to yosemite.   My Mac is from 2009, it use to work perfectly but it wasn´t able to open some apps, thats why i upgrade it.   Now it once i donwload the zip it appears with an ".ods" extension
    i even already download a link
    http://www.microsoft.com/en-us/download/confirmation.aspx?id=44026
    which i read on another support page... but it doesnt allowed me to install it cause it says that i already have the disk of this program....
    Im afraid to erase it and not being able to get it back...
    What can i do!??
    Thanks in advance for this kind answer!!!

    fsolution wrote:
    Problem:  this mac is not reading an excell file after upgrading to yosemite...   Now it once i donwload the zip it appears with an ".ods" extension...
    If the "it" refers to a compressed (zipped) spreadsheet that you downloaded, the ".ods" extension is used by LibreOffice and probably OpenOffice (which are free versions of MS Office) for spreadsheets, which would suggest that wherever you're getting that "Excel" file from has switched to one of those programs. I've tried opening an .ods file from LibreOffice using MS Office 2013 for Windows and it does open though with a warning that some things have been changed. I don't know if Office for Mac can normally open .ods files. But if your need is to just open .ods files, take a look at LibreOffice.

  • My Iphone5 does not show the picture location after upgrading to ios 7.0.4 - why?

    my Iphone5 does not show the picture location after upgrading to ios 7.0.4 - why?

    I change Settings>Privacy>Location Services>Camera to OFF and then ON and the locations start to appear !!!!.
    It seems to be Apple bug.
    Thanks for you efforts

  • My ipod touch version 4.2.1 is not recognized by Windows 7 after upgrading i tunes to 11.2. I have gone through all the trouble shooting suggestions twice

    My ipod touch version 4.2.1 is not recognized by Windows 7 after upgrading i tunes to 11.2. I have gone through all the trouble shooting suggestions twice

    Did it work with previous ii.x version?
    If you  have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
    Did you do everything here:
    iOS: Device not recognized in iTunes for Windows
    Including
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    New cable and different USB port?
    Runs this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Try on another computer to help determine if computer or iPod problem

  • ITunes music not playing in iPhoto slideshow after upgrading to Maverick....Why?

    iTunes music not playing in iPhoto slideshow after upgrading to Maverick....Why?

    Yes, the tracks were purchased in the iTunes store. I'm sure that DRM is the culprit. Seems like an obvious answer now that I think about it.
    Thanks for the help.
    Mark

  • Note 1054131 - Invalid DB objects after upgrade

    HI,
    We performed a migration from SAP 4.6C/Oracle9i.solaris to SAP 4.6C/Oracle10g/HPUX.
    Now we need to upgrade SAP4.6C/Oracle10g/HPUX to ECC6.0.
    As a prerequisite, I have checked the note
    Note 1054131 - Invalid DB objects after upgrade
    And I ran the script
    SQL> SELECT OWNER, OBJECT_NAME, OBJECT_TYPE FROM DBA_OBJECTS
      2  WHERE STATUS='INVALID'
      3  AND
      4  OWNER='SYS';
    OWNER
    OBJECT_NAME
    OBJECT_TYPE         STATUS
    SYS
    DBMS_REPCAT_FLA
    PACKAGE BODY        INVALID
    SYS
    DBMS_REPCAT_MAS
    PACKAGE BODY        INVALID
    OWNER
    OBJECT_NAME
    OBJECT_TYPE         STATUS
    SYS
    DBMS_REPCAT_UTL2
    PACKAGE BODY        INVALID
    SYS
    DBMS_REDEFINITION
    OWNER
    OBJECT_NAME
    OBJECT_TYPE         STATUS
    PACKAGE BODY        INVALID
    All the invalid objects are package body, can anyone help me how to proceed with this, can I proceed my upgrade to ECC 6.0 or do I need to delete the package body.
    If I want to delete the package body,can you pl give me the commands and also post which whether I need to execute any steps
    Pl help
    Thanks
    Senthil

    Hi,
    I guess you are talking about the Oracle Upgrade and not ECC Upgrade, as following are the pre-requisites for an ECC upgrade.
    Making Database-Specific Preparations for Oracle
    1. Check the value of parameter shared_pool_size:
    4 Preparation
    Making Preparations at the Database Level
    Oracle 9.2: Check the value in file $ORACLE_HOME/dbs/init<SID>.ora.
    Oracle 10.1 and higher:
    select NAME, VALUE from v$parameter where name=’shared_pool_size’;
    select NAME, VALUE from v$parameter where name=’shared_pool_reserved_size’;
    If the value is lower than 150 MB, increase it to at least 150 MB (400 MB is better), and restart the
    database.
    2. Log on as user <sapsid>adm at the operating system level.
    3. Log on to the database as the Oracle user system with sqlplus
    4. Check the resource quotas of the database user SAPR3 or SAP<SAPSID>:
    Oracle error 1536 can occur during the upgrade if the resource quotas of database user SAPR3
    orSAP<SAPSID> are limited. Make sure that these quotas are unlimited. Check whether the table
    DBA_SYS_PRIVS contains one of the following entries:
    grantee=’SAPR3/SAP<SAPSID>’,privilege=’UNLIMITED TABLESPACE’,adm=’YES’
    grantee=’SAPR3/SAP<SAPSID>’,privilege=’UNLIMITED TABLESPACE’,adm=’NO’
    To do this, enter the following SQLPLUS statement:
    select * from dba_sys_privs where grantee = ’SAPR3/SAP<SAPSID>’;
    If this entry does not exist, enter the SQLPLUS statement:
    grant unlimited tablespace to sapr3/SAP<SAPSID>;
    5. Log off from the database with the command quit.
    6. Only if using the dictionary managed tablespaces function:
    Make sure that the storage parameters MAXEXTENTS and NEXT have the correct values for certain tables and indexes. Otherwise, they may overflow during the upgrade. The Oracle-specific upgrade SAP Note contains the tables and the required minimum values.You can display the current settings with BRSPACE. The index names are not constant. However, you can also determine these names with BRSPACE. SAP Note 11777 describes how to change the parameters NEXT and MAXEXTENTS.
    7. Only valid for: SAP R/3 3.1I
    Make sure that parameter OPTIMIZER_MODE is set to OPTIMIZER_MODE=RULE.
    For Oracle 9.2, check and, if necessary, edit the following Oracle profile:
    $ORACLE_HOME/dbs/init<SAPSID>.ora
    For Oracle 10.1. and higher, use the following statements:
    Sqlplus /nolog
    Connect /as sysdba
    Alter system set OPTIMIZER_MODE=’RULE’ scope=spfile;
    8. Only if you do not switch off archiving during the upgrade:
    If you want to leave brarchive running during the upgrade to avoid archiver stuck situations (brarchive -f ...), proceed as follows:
    a) Create a temporary copy of brarchive:
    4 Preparation
    4.23 Making Preparations at the SAP System Level
    cp /usr/sap/<SAPSID>/SYS/exe/run/brarchive /tmp
    b) Start brarchive as user ora<sapsid> from the temporary directory /tmp/brarchive -f ...
    c) After the upgrade, delete the copy of brarchive.
    This procedure avoids upgrade errors caused by the program files being overwritten during the upgrade.
    9. If your database version is already higher than the minimum version for the new release, we recommend that you exchange the DBA tools (such as BRSPACE) for the upgrade. The Database Software Oracle DVD for the database contains the up-to-date tools that you unpacked on the current kernel when you migrated the database. After you execute PREPARE, unpack this archive again into the exe subdirectory of the upgrade directory. This overwrites the DBA tools optimized for the minimum required database version with the tools best suited to your database version.
    And if you are talking about an Oracle Upgrade then you just need these to compare once you have upgraded to 10g.
    3.9 Checking for Invalid Database Objects
    This optional step lets you check if there are any invalid database objects before the database upgrade to Oracle database 10g starts. After the upgrade it helps you distinguish database objects that have become invalid due to the upgrade process from those that were already invalid to start with.
    Procedure
    1. Execute the following commands:
    SQL> spool invalid_objects
    SQL> select unique object_name, object_type, owner from dba_objects where status
    = 'INVALID';
    SQL> @?/rdbms/admin/utlrp.sql
    SQL> select unique object_name, object_type, owner from dba_objects where status
    = 'INVALID';
    SQL> spool off
    A list of invalid objects before the upgrade is now generated.
    2. Check the list of invalid objects after the upgrade.
    If any objects in the list from before the upgrade are also in the list of invalid objects after the upgrade, you can be sure that this is not due to the upgrade process.
    Regards,
    Suhas

  • Automation error element not found in vb6 2147319765 after upgrading the os

    Hi we had updated our OS to windows 7 from XP.Previously we had an application in XP which is built on Vb 6 .The application throws an error message like Automation error --element not found with error code 2147319765 .The application shows the same error
    message even after I ran the application in XP compatability mode.
    The application is using data from other servers and all the servers are windows server 2003.
    muneer

    Double post:
    http://social.msdn.microsoft.com/Forums/vstudio/en-US/229b4e46-9bcb-411e-901e-fec376dc36da/automation-error-element-not-found-in-vb6-2147319765-after-upgrading-the-os
    This forum is about VB.Net. If your question is about a VB6 project, have a look here:
    Where to post your VB 6 questions
    Armin

  • ITunes does not work om iPhone 5 after upgrade to iOs7. App store is available without problems. do somone have a tip?

    iTunes does not work om iPhone 5 after upgrade to iOs7. App store is available without problems. do somone have a tip?

    Check Settings > General > Restrictions, and check out Contacts toward the bottom under the privacy restrictions.
    That sounds like the probable cause you cannot add contacts.
    Regarding the iCloud behavior, that sounds like it got huge (35,000) because of incorporating other contacts (from social media, perhaps).  Also contacts sync has nothing to do with iCloud behavior.  The whole idea of keeping your contacts in the cloud is that once you change them on one device, they change everywhere.  Specific syncs are not relevant.

  • I can not use ipad smart cover after upgrade ios 7.

    I can not use ipad smart cover after upgrade ios 7. It makes reboot again again...if i cover up ipad with smart cover. i never had this problem before. please fix this bug!!!!

    Change your iPod DNS to 8.8.8.8
    That should work. Cheers

  • Outgoing calls not working on iphone 4S after upgrading to ios 6.0.1

    outgoing calls not working on iphone 4S after upgrading to ios 6.0.1.
    It always says call back ...
    incoming is working
    i tried number of sim cards from different networks but same issue
    tries resetting network settings but it also didnt worked

    Just counter-check the following settings.
    1. Settings>General>Set Side Swith To: Rotation Lock
    2. Make sure side switch is not in lock position
    3. If necessary do a reset a few more times

  • Are you having problems with the Lacie external drive after upgrading to the new operating system

    Are you having problems with the Lacie external drive after upgrading to OS X Mavericks?

    See here for everyone discussing the issue you are having:
    https://discussions.apple.com/thread/5475136?tstart=0

Maybe you are looking for