Not your average preloader

had no problems until player 9, so I tryed a new preloader
that already works! but doesn't work in this other movie Clip
attached ?Strang indeed?
mind you I do have the preloader inside a movie clip that
loadMovies into a level!
I think I made it a bit to complex but wanted it this way so
I could drag the movie around at same time
please download this link and have a look , and let me know
if you can help
www.kevindauth.com/workExNew.zip
thanks
kD

the movie loads fine with loadMovie(); just the preloader has
stoped working since player 9?
Do you meen that this movie class is the problem for the
preloader failing I read this below!
In Flash Player 9, the Progress Bar Component may not
function correctly in some cases because the Flash Player is using
text data from the server instead of referrer data to determine the
size of the content being loaded.???????
thanks man
kD

Similar Messages

HELP!!! Not your average Serial Number question!

Hey guys, I'm in a bit of a rut. I'm not asking for a serial number, I just need to know where on my computer to find it.
STORY:
I had to erase my mac because Avid messed it all up. Yay Avid!. Anyways, I'm covered for backups though. I have a time machine backup, a bootable external that I cloned as my hard drive pre-erase, and a disk image of my computer pre-erase.
I'm reinstalling all the apps, including FCS 2, but I got the upgrade version. I no longer have the box for Final Cut Studio 1 (or 5.1 or whatever we're calling it) but I have the serial number that I wrote on a post it fromthe last time I did this. My handwriting is legible, but for whatever reason, the FCS installer is accepting the FCS2 upgrade serial, but not the FCS1 serial. Since I have so many copies of my computer pre-erase, I remember before I was able to find a file (can't remember which program, possibly FCP) that had the serial number somewhere in the library folder.
QUESTION: Is there somewhere on the copies of my hard drive pre-erase where that FCS1 serial could be hidden? I need it so I install FCS2, without which, is worthless . And so am I, without my editing software :P.
THANKS GUYS! You're always a big help.

I no longer have the box for Final Cut Studio 1 (or 5.1 or whatever we're calling it)
Do you have the original Apple-branded disks for FCS 5.1?
y/n
No disks = no software just a stolen serial number written on a post-it note.

Not your average authorization problem

Long time isnce my last post But thats irrelivant,
My problem: I have ONE (1) account on itunes and have had a maximum of three computers in my house. Now see Ive donwloaded on each computer atleaset once so i have purchased music on each one. I have also reformatted the HD on each co,mputer. Without knowing I had to deauthorize it first. now I have two computers (same from previous 3) and went to download a song when it saidsomething like "Sorry, youve already used your 5 machines that you can authorize music on." Now what am I to do? I am buying the new 2.o g5 in the next month and would like to play osme of myy tunes w/o having to deauthorize one comp, thea authorize another. Please help me.
-J.Martin

Reading this thread Roger R, "5 computers "authorized"", 10:05pm Oct 15, 2005 CDT may solve your problem.
M

Not your average wifi ios 6 difficulty.

Hiya, I just updated to ios 6, now I have no internet connection.
I'm not talking just wifi - internet on a whole. If I open safari it says it cannot open as my iphone isn't connected to internet. I've restore network settings, still nothing, not even 3G. Help?
Many Thanks.

Yes, i tried all resets and restores. it has no problem connecting wifi but i can't get cellular data which means i can't use it for the main reason i have the phone, mobile banking emails etc. very frustrating. up until the upgrade, i'd never had an issue with my phone.

Serious battery problem...not your average

OK I recieved my Ipod Nano (white) christmas day...I uploaded all of my cd's onto my computer (about 90 or so) through itunes and did all the ipod install stuff. I DID charge my nano overnight until it said charged that same night and now all of a sudden when i start looking around in the menu it says this: No battery power remains. Please connect ipod to power.
I find this VERY bizarre because the battery meter is showing a full or somewhat full battery. This message can appear just randomly..right when i take it out of my AC adapter/computer..when i turn it on in the morning/night..when i start to play one song..when im done listening to 10 songs..it just happens. I believe I have a defective battery but im still not sure. I know that my weak little computer has a Low-powered USB port so thats why i bought the AC adapter for the wall outlet. I only charge it on the adapter and use the computer just to transfer songs. I have tried everything possible. Restarting..factory restore..resetting. Nothing seems to work and im getting pretty aggravated.
Can someone please help me and not direct me to another FAQ or some site here on apple because i've been to them all and tried everything ( i literally mean that).
Thanks
nate
HP Windows XP Pro

Welcome to Apple Discussions!
There are many pages. Take a look at all of them...
About the iPod Battery
Tips And Tricks For iPod Battery
iPod Battery Indicator Is Approximate
Caring For iPod Battery
iPod Battery Unplugged
btabz

Not your average bit rate error

Hi, all-
I had a DVD project that burned just fine yesterday. It contained seven video clips and two menus for a total of about 13 minutes of video. I had a test DVD up and running, no problem.
I decided to trim things down a bit and eliminate three video files, clip thirty seconds out of another, and turn the second menu into a screen of text information only. Now I consistently get a bit rate error where before I had no problems at all.
Any thoughts? I've been editing using Quicktime Pro and saving as a self-contained file. I've had no problems until now.
I'm using 2 pass VBR, various bit rates but nothing crazy. (I was able to burn the test DVD at the highest bit rates possible, but now nothing works.) Motion estimation is set at best. Total video is around 8 minutes, maybe less.

If you have edited one of your video clips and have re-encoded the clip to MPEG-2. It is best to remove the original clip from the track in the DVDSP project and then add the newly edited version of the clip to the same track. A quick fix for your project might be forcing DVDSP to reparse all your video assets by deleting the PAR folder(s)/files associated with your video assets and then opening the project again (it may take several minutes for the new PAR files to be generated when you first open the project).
-k

Very weird problem - not your average black screen

So, I finally broke down and decided to ask for help on this. I have a good amount of experience and have not been able to get this to work consistently. The laptop is admittedly pretty beat up, but it works without a hitch once it's booted. It seems like complete luck getting it to work as if it starts up when it's done frustrating me. I need it as a node for an Adhoc project and it would be great if it could work normally again.
Laptop:
Toshiba M305 w/ Turion x2 and Radeon graphics.
I don't think it makes a difference but I'm running Debian on it with an SSD. I've also replaced the original keyboard. The problem started months after these changes after the laptop took a hit off the bed (carpet). I get a black screen as soon as I turn it on after shutting it down. The screen won't turn on but I hear the DVD drive make its normal noise and the fan spins. If I'm persistent enough with a combination of below tactics or just plain luck it will start back up and work perfect.
What I've tried to no avail:
-removing the battery and the power and holding down the power to drain the capacitors
-taking out one of both memory modules (i think it does the POST because it beeps when there's no memory)
-removing the hard drive
Things I don't think it is and why:
-don't think it's the screen because when it works it lights up fine, also it has the same issue when plugged into a vga display
-don't think it's the hard drive nor the memory as it has the same problem with either off
I'm inclined to think it's a MoBo problem? But then why would it work perfectly fine when it feels like it... I would think nothing is fried. The next thing I was going to try is removing the CMOS battery to reset the BIOS settings and while it's open check for loose connectors I guess.
Any help is truly appreciated! Let me know if there's any other info I can provide. Thanks.
-Dan

http://forums.toshiba.com/t5/Computer-Troubleshooting/black-screen-after-turn-on-or-reboot/m-p/6775
^ There is a mention in there of a problem with faulty switch or something, related to whether or not the machine can tell the lid is open. If it works sometimes, that plus it was jolted in a fall might say loose connection someplace.
irisvista.com shows pictures of disassembling various Toshibas, in case you hadn't found that site yet.

PPS dynamic filter creation - not your normal thing but we need a solution, dont think Performance Point can handle it!

My challenge at the moment is that I need to create a dynamic filter. To explain this is a cascading filter but not your normal cascading filter,
ie, Year/Month/day etc.
Here we have a single Dimension, Organisation. It contains every level of a business,
Site,
Dept,
Company name,
Division
Holding
Strategic Area
From these as a default we have 4 built hierarchies with a different combination of the above.
Activity (Strategic Area, Dept)
Organisation (company Name, site, Dept)
Sites (Division, Site)
Holdings(Holding, Strategic Area, site, Dept)
At any given time we have have additional Hierarchies created within the Dimension, further adding to the hierarchy list.
We now have a challenge where we require our users to be able to in the first filter select the Hierarchy they want to use, ie, Holdings, Site, Organisation
or Activity. This should then cascade to the second filter and contain the relevant hierarchy and levels as a multi select filter. Of course this also needs to be connected to number of graphs, charts and scorecards on the page, dynamically.
I have gone around the houses to get this to work but not having any luck. Tried the variety of filters available, MDX, member selection, tabular,
SharePoint, and attempted to mix and match to get this to work. I cannot find a way but I don't believe this is not possible.
If it is not possible we must look around for another front end solution for our BI Dashboards which I would prefer to avoid. Any response or suggestion
would be much appreciated.
Regards,
Sheb

Hi Sheb,
Please check the articles below and see if cascading filter in PerformancePoint Dashboard can be help:
http://technet.microsoft.com/en-us/library/hh272541(v=office.15).aspx
http://www.dotnetcurry.com/showarticle.aspx?ID=872
Regards,
Rebecca Tu
TechNet Community Support

This is Not Your Primary iCloud Account

When I go to System Preferences -> iCloud, it says "This is not your primary iCloud account." I've seen this problem mentioned here a few times, but no answers, so I'll ask again. What does that mean? I was not aware I had more than one iCould account. The iCloud prefs panel only shows the one account, which is apparently not the primary one. The Details.. button does nothing. The Account Details button just shows the name on the account. How do I find out what my other iCloud account(s) is? Where did this other account even come from? How can I set my primary account so it works on my Mac?
Curiously, in the iCloud Settings on my iPad it says nothing about a primary account, and shows Bookmarks, iCloud storage, etc. all available (not available on my Mac). It shows the same name and email as my Mac does for the account, but no mention of it not being a primary account. Even more curious, I now seem to have 20 GB of storage through 9/30/50!

I had the same notice on my iMac. I checked my iPhone and that is where my primary account is happening. In my iPhone Settings > General > Usage, scroll down to iCloud click on Manage Storage > Change Storage Plan. This is where you will find what your storage is, and what you can purchase to upgrade.

What do I do if it says "This is not your main iCloud ID" ?

I want to set "Find my Iphone" in my Mac but iCloud just lets me set my mail, contacts and calendars because it says "This is not your main iCloud ID" ? What can I do?

You are getting this message because you are attempting to create an iCloud account on a PC. You can only create iCloud account on an iOS device (iPhone, iPad or iPod Touch) running iOS 5 or higher, or on a Mac running OS X Lion (10.7.5) or higher. After creating your account on one of these devices you will then be able to sign into the account on your PC.
If you have a 4S, go to Settings>iCloud and sign in with your Apple ID to create your account. Then sign in with the same ID on the iCloud control panel on your PC. It should be accepted this time.

Not your primary iCloud account message.

When I sign into iCloud on my desktop running Lion, I keep getting a message that says 'this is not your primary iCloud account'...
How do I find out what my primary account is, and how do I get it on my desktop?

I found rebooting to be the KEY item in this process. As long as I didn't reboot, it would never complete the process. As soon as the account is deleted from the mail, calendar, and contacts list, reboot, THEN go to the iCloud prefs screen and set things up....it works.

TS3988 incorrect this is not your primary icloud account

In preferences iclod icon shows incorrect primary account. When I select my mail a statement shows this is not your primary icloud account.
I am the primary account holder, I must have done something incorrect whe migrating to icloud.

Go at https://appleid.apple.com and login to verify your account settings. It is possible that your AppleID is different than your iCloud email adress and you can verify this on the AppleID webpage.

Getting "This is not your primary iCloud account" when it is and works on another MacBook

Hello,
I am seeing the following message in my iCloud preference pane:
"This is not your primary iCloud account"
When I know in fact it is my primary and my only account. I have it setup on my iPhone 4 and my work MacBook Pro and it is working correctly with the same account information on both of those.
Anybody else seeing this?

I found rebooting to be the KEY item in this process. As long as I didn't reboot, it would never complete the process. As soon as the account is deleted from the mail, calendar, and contacts list, reboot, THEN go to the iCloud prefs screen and set things up....it works.

Ronald pasticcio I am not your customer, I don't have your phone/broadband

you sent me a bill and i am not your customer and i dont have an account with you, my tel 07552761571, are you looking ,because my number do not belong to your network being ee, do you understand, i believe you are billing me on that number which is giffgaff , please sort yourselves out

This is a pubic forum now everyone knows your number.

I want the gold security padlock back, not your color codes, otherwise I will return to Internet Explorer

I want the gold security padlock back, not your color codes, otherwise I will return to Internet Explorer

Install this add-on: https://addons.mozilla.org/en-US/firefox/addon/padlock-icon/
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

Not your average preloader

Similar Messages

Maybe you are looking for