Not your average wifi ios 6 difficulty.

Hiya, I just updated to ios 6, now I have no internet connection.
I'm not talking just wifi - internet on a whole. If I open safari it says it cannot open as my iphone isn't connected to internet. I've restore network settings, still nothing, not even 3G. Help?
Many Thanks.

Yes, i tried all resets and restores. it has no problem connecting wifi but i can't get cellular data which means i can't use it for the main reason i have the phone, mobile banking emails etc. very frustrating. up until the upgrade, i'd never had an issue with my phone.

Similar Messages

HELP!!! Not your average Serial Number question!

Hey guys, I'm in a bit of a rut. I'm not asking for a serial number, I just need to know where on my computer to find it.
STORY:
I had to erase my mac because Avid messed it all up. Yay Avid!. Anyways, I'm covered for backups though. I have a time machine backup, a bootable external that I cloned as my hard drive pre-erase, and a disk image of my computer pre-erase.
I'm reinstalling all the apps, including FCS 2, but I got the upgrade version. I no longer have the box for Final Cut Studio 1 (or 5.1 or whatever we're calling it) but I have the serial number that I wrote on a post it fromthe last time I did this. My handwriting is legible, but for whatever reason, the FCS installer is accepting the FCS2 upgrade serial, but not the FCS1 serial. Since I have so many copies of my computer pre-erase, I remember before I was able to find a file (can't remember which program, possibly FCP) that had the serial number somewhere in the library folder.
QUESTION: Is there somewhere on the copies of my hard drive pre-erase where that FCS1 serial could be hidden? I need it so I install FCS2, without which, is worthless . And so am I, without my editing software :P.
THANKS GUYS! You're always a big help.

I no longer have the box for Final Cut Studio 1 (or 5.1 or whatever we're calling it)
Do you have the original Apple-branded disks for FCS 5.1?
y/n
No disks = no software just a stolen serial number written on a post-it note.

Not your average preloader

had no problems until player 9, so I tryed a new preloader
that already works! but doesn't work in this other movie Clip
attached ?Strang indeed?
mind you I do have the preloader inside a movie clip that
loadMovies into a level!
I think I made it a bit to complex but wanted it this way so
I could drag the movie around at same time
please download this link and have a look , and let me know
if you can help
www.kevindauth.com/workExNew.zip
thanks
kD

the movie loads fine with loadMovie(); just the preloader has
stoped working since player 9?
Do you meen that this movie class is the problem for the
preloader failing I read this below!
In Flash Player 9, the Progress Bar Component may not
function correctly in some cases because the Flash Player is using
text data from the server instead of referrer data to determine the
size of the content being loaded.???????
thanks man
kD

Not your average authorization problem

Long time isnce my last post But thats irrelivant,
My problem: I have ONE (1) account on itunes and have had a maximum of three computers in my house. Now see Ive donwloaded on each computer atleaset once so i have purchased music on each one. I have also reformatted the HD on each co,mputer. Without knowing I had to deauthorize it first. now I have two computers (same from previous 3) and went to download a song when it saidsomething like "Sorry, youve already used your 5 machines that you can authorize music on." Now what am I to do? I am buying the new 2.o g5 in the next month and would like to play osme of myy tunes w/o having to deauthorize one comp, thea authorize another. Please help me.
-J.Martin

Reading this thread Roger R, "5 computers "authorized"", 10:05pm Oct 15, 2005 CDT may solve your problem.
M

Serious battery problem...not your average

OK I recieved my Ipod Nano (white) christmas day...I uploaded all of my cd's onto my computer (about 90 or so) through itunes and did all the ipod install stuff. I DID charge my nano overnight until it said charged that same night and now all of a sudden when i start looking around in the menu it says this: No battery power remains. Please connect ipod to power.
I find this VERY bizarre because the battery meter is showing a full or somewhat full battery. This message can appear just randomly..right when i take it out of my AC adapter/computer..when i turn it on in the morning/night..when i start to play one song..when im done listening to 10 songs..it just happens. I believe I have a defective battery but im still not sure. I know that my weak little computer has a Low-powered USB port so thats why i bought the AC adapter for the wall outlet. I only charge it on the adapter and use the computer just to transfer songs. I have tried everything possible. Restarting..factory restore..resetting. Nothing seems to work and im getting pretty aggravated.
Can someone please help me and not direct me to another FAQ or some site here on apple because i've been to them all and tried everything ( i literally mean that).
Thanks
nate
HP Windows XP Pro

Welcome to Apple Discussions!
There are many pages. Take a look at all of them...
About the iPod Battery
Tips And Tricks For iPod Battery
iPod Battery Indicator Is Approximate
Caring For iPod Battery
iPod Battery Unplugged
btabz

Not your average bit rate error

Hi, all-
I had a DVD project that burned just fine yesterday. It contained seven video clips and two menus for a total of about 13 minutes of video. I had a test DVD up and running, no problem.
I decided to trim things down a bit and eliminate three video files, clip thirty seconds out of another, and turn the second menu into a screen of text information only. Now I consistently get a bit rate error where before I had no problems at all.
Any thoughts? I've been editing using Quicktime Pro and saving as a self-contained file. I've had no problems until now.
I'm using 2 pass VBR, various bit rates but nothing crazy. (I was able to burn the test DVD at the highest bit rates possible, but now nothing works.) Motion estimation is set at best. Total video is around 8 minutes, maybe less.

If you have edited one of your video clips and have re-encoded the clip to MPEG-2. It is best to remove the original clip from the track in the DVDSP project and then add the newly edited version of the clip to the same track. A quick fix for your project might be forcing DVDSP to reparse all your video assets by deleting the PAR folder(s)/files associated with your video assets and then opening the project again (it may take several minutes for the new PAR files to be generated when you first open the project).
-k

Very weird problem - not your average black screen

So, I finally broke down and decided to ask for help on this. I have a good amount of experience and have not been able to get this to work consistently. The laptop is admittedly pretty beat up, but it works without a hitch once it's booted. It seems like complete luck getting it to work as if it starts up when it's done frustrating me. I need it as a node for an Adhoc project and it would be great if it could work normally again.
Laptop:
Toshiba M305 w/ Turion x2 and Radeon graphics.
I don't think it makes a difference but I'm running Debian on it with an SSD. I've also replaced the original keyboard. The problem started months after these changes after the laptop took a hit off the bed (carpet). I get a black screen as soon as I turn it on after shutting it down. The screen won't turn on but I hear the DVD drive make its normal noise and the fan spins. If I'm persistent enough with a combination of below tactics or just plain luck it will start back up and work perfect.
What I've tried to no avail:
-removing the battery and the power and holding down the power to drain the capacitors
-taking out one of both memory modules (i think it does the POST because it beeps when there's no memory)
-removing the hard drive
Things I don't think it is and why:
-don't think it's the screen because when it works it lights up fine, also it has the same issue when plugged into a vga display
-don't think it's the hard drive nor the memory as it has the same problem with either off
I'm inclined to think it's a MoBo problem? But then why would it work perfectly fine when it feels like it... I would think nothing is fried. The next thing I was going to try is removing the CMOS battery to reset the BIOS settings and while it's open check for loose connectors I guess.
Any help is truly appreciated! Let me know if there's any other info I can provide. Thanks.
-Dan

http://forums.toshiba.com/t5/Computer-Troubleshooting/black-screen-after-turn-on-or-reboot/m-p/6775
^ There is a mention in there of a problem with faulty switch or something, related to whether or not the machine can tell the lid is open. If it works sometimes, that plus it was jolted in a fall might say loose connection someplace.
irisvista.com shows pictures of disassembling various Toshibas, in case you hadn't found that site yet.

Since updating my airport utility app to iOS 8, it can no longer see my base station and will not connect to wifi.

Since updating my airport utility app to iOS 8, it can no longer see my base station and will not connect to wifi. My son's 4s with an older version of the app sees it and connects fine, so I know it's working. The internet works fine for everyone else in the house but my

Please take a look at this Apple support document to see if it help solve your issue:
iOS: Troubleshooting Wi-Fi networks and connections
If this does not help, we would recommend that you post in the iPhone community support area, since you have an iPhone / iOS issue. The link is just below.
Using iPhone

Ipad is not connecting to wifi in sleep mode after iOS 6 update

I used to be able to receive FaceTime calls when ipad was in sleep mode but ever since this past update I don't. I had problems like everyone else wi connecting to the Internet but I was able to fix that. Is there any way the ipad can stay connected while in sleep mode.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

HT4623 IPad 2 will not upgrade to IOS.70, keeps saying I am not connected to WIFI when it is connected. Even tried turning of Advast VPN

I cannot upgrade my IPad 2 with IOS.70, the download appeared to be complete but while it was verifing a "not connected to WIFI" message appeared yet IPad was connected and working. Not sure what is wrong, even tried to turn off Advast VPN thinking that was the issue but cannot complete upgrade.

try resetting your phone by turning it off and back on again. Also try resetting your network settings under Settings > General > Reset > Reset Network Settings.

WiFi iPhone 4S does not work after update iOS 6.0

WiFi iPhone 4S does not work after update iOS 6.0

This sounds more like a hardware issue.
Have you checked that the dock connector port is not dirty?

I have apple iPhone 4S upgraded to iOS 6.0.1 and everything was working fine suddenly my Wifi was not connecting and found the wifi on/off button is greyed out and to enable it I tried all resets but still my problem have not solved, still wifi is off

I have apple iPhone 4S upgraded to iOS 6.0.1 and everything was working fine suddenly my Wifi was not connecting and found the wifi on/off button is greyed out and to enable it I tried all resets but still my problem have not solved, still wifi is off

Same here.... No fix. Replacing is the option apparently and if you're out of warranty, you're SOL. That was as per the "Genius" at Apple.

I updated an iPod touch, an iPad 2, and an iPhone 4 to iOS 6, and all of them now will not connect to WiFi. They all give this wierd 404 error page from Apple and insist that I need to login to the network. Bad job testing the software Apple.

I updated an iPod touch, an iPad 2, and an iPhone 4 to iOS 6, and all of them now will not connect to WiFi. They all give this wierd 404 error page from Apple and insist that I need to login to the network. What's the fix? None of the recommended fixes work in any of these devices. Reset device, reset network, renew lease, etc. None of them work.

Does the iPod work OK?
Does it charge when connect to the computer?
Does it appear in My Computer?
Look at the dock connector on the iPod. Compare with the iPod that does work/connect.
I suspect you have a 2G iPod. Those can only go to iOS 4.2.1
http://support.apple.com/kb/HT1353#iPod_touch_late2009
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

IOS 5.0.1 will not sync over WiFi with iTunes....

Is there anyone else with this same issue? I've only found one other thread on this in Support so far. If that's the case then I'm thinking maybe I have a system issue rather than iTunes or iOS.
Basically all my devices (4 total, 2 iPhone 4's, 1 iPad 2nd Gen and one iPad 1st Gen) show up on iTunes in the left side and I can click on them where general info will show up but that is all I can do. If I try and see music, apps, etc. it drops each device out and disappears. They will then reconnect and come back up on iTunes but I still cannot do anything further.
I can also try the sync button on each iOS device but then again the device will drop off of iTunes and I will not be able to sync.
Let me know if anyone else is having any issues with this.
Thanks,
Lew

I am having the same issue with my 1st gen iPad (3G/64GB).
After updating to iOS 5.0.1 over the weekend, I cannot sync to iTunes (10.5) under OS X 10.6.8. It does not seem to matter whether or not I have WiFi sync enabled.
I plug in my iPad to the USB cable, In the iTunes status window, I see a very brief message stating "Syncing with Grace." Then a very brief message stating "Cancelling Sync" or "Finishing Sync". Then I see a message stating "Waiting for sync to start".
The sync then times out after two minutes with a message "The iPad 'Grace' could not be synced, because the sync session failed to start."

I can't see my child's iphone 5 (running iOS 8) in find a friend when not connected to wifi?

I can't see my child's iphone 5 (running iOS 8) in find a friend when it's not connected to wifi?
please help.

Hi Wingnut01977,
If you are having issues with Find My Friends in certain situations, you may find the following article helpful:
iCloud: Troubleshooting Find My Friends
Regards,
- Brenden

Not your average wifi ios 6 difficulty.

Similar Messages

Maybe you are looking for